3-valjni krivilni stroj IMCAR - SIHR

IMCAR SIHR 12/3

Stanje: novo, Leto izdelave: 2023, skupna višina: 1.850 mm, trajanje garancije: 12 meseci, vhodna napetost: 380 V, moč: 1,5 kW (2,04 KM),

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. Hjdpfxshzbipj Ab Esfd - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: dober (rabljeno), Tehnični podatki: Delovna dolžina: 2050 mm Največja zmogljivost upogibanja: 18,0 mm Hfjdpfx Asxruvzeb Eod Predupogib: 12,0 mm Premer zgornjega valja: 280 mm Premer spodnjega valja: 280 mm Naprava za stožčasto upogibanje Hidravlični nagibni ležaj Moč motorja: 7,5 kW Dimenzije (dolžina x širina x višina): pribl. 3650 x 1550 x 1650 mm Teža: pribl. 7,5 ton Prodajalec ne odgovarja za napake pri tipkanju ali prenosu podatkov. Stroj je po videzu, tehniki in obrabi primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnega koli jamstva.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 158 h, doseg roke: 1.300 mm, Pozdravljeni, prodajamo demonstracijskega robota UR10e, ki je bil uporabljen za konceptno študijo, katero pa smo kasneje opustili. Hjdpfxep E T N Ae Ab Eefd

Stanje: zelo dobro (rabljeno), Offered is a used solids pump / dirty water pump. SDAG Wismut-Aue. For further details, please refer to the photos. Hfjdpfohwnfcjx Ab Esd

Leto izdelave: 2001, stanje: generalkompletno obnovljen (rabljeno), Affordable MAZAK Laser Cutting System NTX48 1.5kW Hfodpfx Abjhturco Esd Year of manufacture: 2001 Very well-maintained, completely overhauled MAZAK laser machine with 1500W Sheet size: 2500mm x 1250mm Minimal installation footprint: 2.6m x 6m Small parts conveyor belt Fully enclosed machine cover Mild steel: up to 12mm Stainless steel: up to 6mm Plastic processing possible Incl. software Incl. warranty Incl. extraction system Incl. commissioning and training Machine can be tested under power! ===Optional: Fully automatic loading and unloading available===

Stanje: novo, Leto izdelave: 2025, premer valja: 140 mm, dolžina valja: 1.570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital readout for rear roll movement - Digital readout for bottom roll movement (material clamping) - Hardened rolls - Conical rolling - Brake motor - Emergency stop - Documentation Hfodpfx Abegg Nv Is Ejd - 400V

Stanje: novo, Hydraulic Punching and Shearing Machine SAHINLER HKM 65 Applied force: 65 tons. Motor power: 5.5 kW Hfedpfoggbuhex Ab Esd Dimensions: 1,700 x 900 x 1,670 mm (L x W x H). Weight: 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x Thickness 20 mm Throat depth: 305 mm Punch stroke: 55 mm Working height: 1,030 mm SHEARING: Flat bars: 300 x 20 mm 375 x 15 mm Blade length: 380 mm Round bars: Ø 45 mm Square bars: 45 mm Angle profiles at 90°: 120 x 120 x 12 mm Angle profiles at 45°: 70 x 70 x 10 mm NOTCHING: Max thickness: 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm

Stanje: rabljeno, Leto izdelave: 2003, stiskalna sila: 260 t, Hydraulic Press Brake Make: HACO Model: ERMS 60-260 Year of manufacture: 2003 Technical Specifications Manufacturer: HACO Model: ERMS 60-260 Year: 2003 Pressing force: 260 t Hedpowkttrefx Ab Eefd Bending length: 6000 mm Dimensions (L x W x H): approx. 7.0 x 2.0 x 3.70 m Weight: approx. 31 t Equipment • Digital control ATS 560 • Fiessler safety light curtain (front) • Centrally adjustable crowning • Amada tooling system • Controlled axes: Y1, Y2, X • R-axis manual • 1 set upper tool • 1 set lower tool All information is provided without guarantee. A demonstration is possible at any time in the showroom.

Stanje: novo, Timesavers Series 12 WW Hfjdpfxowqf U Uj Ab Eed The machine is equipped with two abrasive belt stations, allowing you to use Station 1 for preliminary grinding—to remove heavy burrs and splatter—and Station 2 to achieve a surface finish on the part. The conveyor carpet transport speed is infinitely adjustable. The table opening can be adjusted from 0.8 to 100 mm.