CNC stružni in rezkalni center

EMCO EMCO HYPER-Turn 665 Plus

Stanje: rabljeno, CNC lathe with Y axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i-T ASA 5 Main spindle power: 15 kW Self-centering chuck diameter: 175 mm ASA 5 spindle mount Bar capacity: 52 mm Turning diameter: 230 mm Turning length: 500 mm Max spindle speed: 5000 rpm Number of tool turrets: 1 Number of tool stations in first turret: 12 Number of driven tools in first turret: 12 First turret tool mounting type: VDI 30 X axis travel: 160 mm Y axis travel: +/- 32 mm Z axis travel: 550 mm Rapid traverse (X/Y/Z): 30 m/min Sub-spindle: yes ASA 5 spindle nose Max sub-spindle speed: 5000 rpm Sub-spindle power: 9 kW Sub-spindle bar capacity: 30 mm Bar feeder make and model: LNS with single guide tube Chip conveyor: belted Presetting: yes Kdjdpfeqn E U Tex Af Teg Year: 2000 The machine is available under power in our warehouse in Gussago (BS), Italy. Mimu Machine Tools Italy

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 109.078 h, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 45.000 m/min, hitri pomik os Y: 45.000 m/min, hitri pomik na osi Z: 45.000 m/min, model krmilnika: Siemens 840 D, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Hermle C30 U Siemens 840D Stroj VKLOP: 109078 h / Vreteno VKLOP: 22117 h - Vreteno HSK-A63 10000 min-1 - 32 mest za orodje - Rotacijska miza SRT 280 mm z integriranim vpenjalnim sistemom SK50 (če ni potrebna, se lahko zapre ali se prilagodi za uporabo kot sistem pritrdilne ničle) - Zunanja dovod hladilne tekočine - Notranja dovod hladilne tekočine s papirnim trakom filtrom 80 bar - Pištola za spiranje ostružkov - Transporter ostružkov - Ročni upravljalni modul - Samodejna kabinska vrata - 32 mest za orodje plus še 87 mest ZM87 - Toplotna kompenzacija - BLUM merjenje orodja Wange Kedpfxexcp Slo Af Tedg - Merilna sonda Renishaw - Posoda za ostružke - Signalna luč Stroj je bil v celoti pregledan in na voljo so geometrijsko poročilo ter meritve krožnosti. Stroj je možno kadarkoli pod elektriko pregledati in preizkusiti. Zelo dobro vzdrževano stanje.

Stanje: dober (rabljeno), Leto izdelave: 2022, CNC Lathe Manufacturer: DMG MORI Machine Model: CLX 350 V1 Control: SLIMline 0i-F Plus Fanuc Touch Year of Manufacture: 2022 Controlled Axes: X / Z TECHNICAL DATA Turning length: 540 mm Spindle: Motor spindle 11/16 kW Tool mounting: VDI30, 12 positions Main spindle: AC motor - Speed: up to 5,000 rpm - Spindle nose: Main spindle A2-6" - Drive power (100/40% duty cycle): 11 / 16.5 kW Turret: 12-position - Driven: 12 stations - Toolholder: VDI 30 FEATURES + Technology cycle for applying alternating spindle speed for vibration-sensitive clamping + Direct measuring system X-axis + Programmable positioning and pressure force + Ergonomic DMG MORI SLIMline® operator panel + Hollow chuck cylinder, max. bar capacity D65 mm + Tailstock, hydraulically traversable via M-function + External electronic handwheel + Chip disposal package: - Chip conveyor with right-hand discharge instead of chip tank + 4-color signal lamp + Differential pressure chucking for main spindle + Foot pedal for tailstock + Automatic NC tailstock for maximum machining flexibility – full control of force within range 0.7 – 3.5 kN + High-pressure pump 12 bar + Coolant spray gun 5 bar Kdjdew Hxi Djpfx Af Teg + Manual tool measurement device in work area, make MARPOSS + Mechanical oil mist separator type AFS 600 Technical data and specifications may be subject to changes and errors.

Stanje: rabljeno, Leto izdelave: 2014, CNC turning and milling center (9-axis) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) ATC tool magazine Number of tool pockets: 40 Tool holder: CAPTO C6 Lower tool turret Kjdpfx Afex Hy R Nj Tsdg Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Toolholder type: BMT 55P Motor power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Part unloading with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water supply through turret - Compact filter system Knoll - Automatic workpiece measurement

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Siemens Sinumerik 840D control system Bar capacity: 65 mm Spindle speed: 5,000 rpm 2 x 12-station turrets with driven tools Turret 1 with Y-axis Parts catcher Kdodpfjwh U D Hox Af Tjg Band filter system Chip conveyor IRCO Profimat bar feeder

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (preloaded roller guides), with Y-axis on main and counter spindle - Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main Spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter Spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Turret: • 12-position VDI 30 turret, radial, with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel: +/- 40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • SINUMERIK ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant detection • USB interface • Control cabinet air conditioning • Coolant system incl. coolant pump (3.5 bar) • Chuck wash (additional pump, 3.5 bar) • Parts ejector and coolant through counter spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: Enables the use of the counter spindle with installed live center for workpiece support. This allows shaft parts to be supported and machined, even on machines without a tailstock, using the counter spindle. Maximum thrust force is limited to 50% of the maximum axis force. Kdsdpfxox E Dnce Af Tog EMCO PROFI-NET ROBOT INTERFACE: Interface for connecting robots (HARTING connector, Profinet communication, dual-channel/potential-free safety signals). Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE interface for connection to MDE/BDE systems. Standard features include: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D machine data model included Pneumatically operated finished part catcher for gentle unloading of finished parts: Finished parts are transported either to a catch box (standard) or conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the SL1200 short bar feeder from EMCO. ...and more. Machine is available immediately!

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Kodpfx Afjw Tg Adj Tjdg Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Travel in Z: 750 mm Tool Carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feeding: Short bar loader, EMCO LM 1200 Finished parts removal: Pneumatic workpiece pick-up unit with conveyor belt Oil mist extraction: Mechanical separator, manufacturer Absolent Tool holders: Various fixed and driven holders Additional equipment: Spindle cooling unit

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Na voljo je dvo-vreteno stružno-rezkalni center Mazak. Hod X/Y/Z: 580mm/160mm/1545mm, os B: 225°, os C: 360°, razdalja med konicama: 1500mm, maks. premer struženja: 660mm, premer nad ležiščem: 660mm, hitrost glavnega vretena/protivretena: 5000obr/min, število orodij: 40+9, tlak hlajenja: 70bar. Dimenzije stroja X/Y/Z: cca 5200mm/2550mm/2600mm, teža: cca 14000kg, ure vretena: 24679h. Vključuje visokotlačno hlajenje, SMW luneto, SMW vpenjalno glavo, integracijo lunete, Renishaw sondo, merilno sondo, CAD/CAM programsko opremo Topsolid 7.18, oljni separator, postprocesor in Inspection-Plus paket. Stroj je bil večinoma uporabljen za fino obdelavo. Dokumentacija je na voljo. Ogled na lokaciji mogoč. Kodpfsx Ih Dgex Af Tedg

Leto izdelave: 2004, Stanje: pripravljen za uporabo (rabljen), A CNC twin-spindle turning and milling center by Gildemeister, including coolant system and chip conveyor, is available. Swing diameter over bed: 640 mm, machining diameter: 400 mm, center distance: 1930 mm, X/Z travel: 550 mm/1585 mm, Y-axis travel: +/-110 mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36 kW/45 kW, speed: 4000 rpm, torque: 600 Nm-730 Nm, bore: 107 mm. Milling spindle: speed: 12000 rpm, power: 13.2 kW/22 kW, torque: 100 Nm. Tool positions: 60, turret: 12-station star turret SW 380. Machine dimensions X/Y/Z: approx. 9300 mm/4600 mm/3100 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection possible. Kedpfowmdv Aox Af Tjdg

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 640 mm Maximum turning diameter 640 mm Control Siemens 840 D Powerline - - - - - Main spindle - - - - - - - - - - - Bar capacity 65 mm Chuck diameter 200 - 315 mm Spindle bore diameter 80 mm Main spindle front bearing diameter 120 mm --- Counter spindle --- Bar capacity 65 mm Chuck diameter 315 mm Spindle bore diameter 80 mm Front bearing diameter 120 mm - - - - - General Data - - - - - - - - - - - Spindle distance 1,500 mm Kdjdpfxsvx U A Sj Af Tjg Turning length 1,185 mm Main/counter spindle speed 5,000 rpm Driven tool speed 12,000 rpm Slide travel X1, Y1: 550 / 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm CNC Turning and Milling Centre | DMG GILDEMEISTER - GMX 250 linear with Main/counter spindle, chip conveyor, tool changer, turret set up for driven tools, and equipped with a gantry loading system (Pneumotec portal system S-01623a). The machine has only approximately 32,000 operating hours. The machine is in very good condition and can be inspected. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear