CNC stružnica

Emco Turn 365 TCmy

Leto izdelave: 2003, obratovalne ure: 4.902 h, Stanje: pripravljen za uporabo (rabljen), Krmilna enota Blagovna znamka: SIEMENS Model: Sumerik 810 D Splošni podatki Širina: 2500 mm Globina: 4000 mm Višina: 2500 mm Teža stroja: 6000 kg Glavni pogon Premer vretena: 65 mm Število osi: 3 Pomiki Pomik X-osi: 210 mm Pogon X-osi: 5000–7000 Nm Hitri pomik X-osi: 24 m/min Pomik Y-osi: ± 40 mm Pomik Z-osi: 610 mm Pogon Z-osi: 5000–7000 Nm Hitri pomik Z-osi: 24 m/min Gedpjx D H Adofx Afqett Revolver Število revolverjev: 1 Pogonska orodja: Da Vpenjalni stožec orodja: VDI 30 Orodja Število postaj: 12 Dodatna oprema Olajševalec olja Lovilec kosov Ta 3-osni EMCO turn 365 tcmy je bil izdelan leta 2003 in ima revolver za 12 orodij, držalo orodja VDI 30 ter pogonska orodja s hitrostjo do 4.000 min⁻¹. Stroj je opremljen s pogonskim vpenjalom, vpenjalnim konusom, napravo za vpenjanje v pušo in dodatnimi držali za orodja. Idealen je za natančno struženje, saj ponuja odlične zmogljivosti z vretenom premera 65 mm in hodom Z-osi 610 mm. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Machining Centre - Vertical / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of Manufacture: 1999 The machine can be inspected under power and cutting, by appointment. Well-maintained, very good condition, fully functional. Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed drives: - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed rate: 0 - 30,000 mm/min - Rapid traverse X, Y, Z: 30 m/min - Ball screw diameter/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Measuring system: - Input increment: 0.001 mm Work spindle: - Drive power (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12,000 N Tool magazine / changer: - Tool change system: Pick-up - Number of magazine positions: 24 positions - Max. tool diameter with free adjacent positions: 80/140 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec - Magazine rotation speed: 47 rpm - Max. load capacity of tool magazine (24 x 3 kg): 72 kg Machine table: - Clamping area with T-slots DIN 650-14: 800 x 500 mm - Table load (setup weight): 500 kg - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - ICS, 15 bar - Coolant system (emulsion) - Electronic handwheel - Chip conveyor - Documentation - CE marking No guarantee for completeness and accuracy of the technical data and equipment. Gtedov Nxbyspfx Afqst - Subject to prior sale -

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R6CQ2401, premer struženja nad prečnim suportom: 360 mm, izvrtina vretena: 65 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 210 mm, pomik po osi Z: 610 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Control system: Siemens Sinumerik 840 D X-axis travel: 210 mm Z-axis travel: 610 mm Z-axis as rotary axis – resolution: 0.001° Spindle Spindle size: 65 mm diameter Spindle outside diameter front bearing: 100 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Distances and Workpiece Dimensions Distance main spindle – tailstock: 805 mm Distance main spindle – sub spindle: 716 mm Max. workpiece size with tailstock: 200 × 520 mm diameter Sub Spindle / Tailstock Inner taper sub spindle/tailstock: MT4 Tailstock quill travel: 500 mm Max. thrust force: 8,000 Nm Feed and Rapid Traverse Feed force X-/Z-axis: 5,000–7,000 Nm Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse: 100 rpm Gedswu Ecgopfx Afqstt Tool Carrier Tool turret: 12-position Tool holder: VDI 30 Driven stations: 12 Speed range of driven tools: 0 – 4,000 rpm MACHINE DETAILS Dimensions: 4.0 x 2.5 x 2.5 m Weight: 6 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 29 A EQUIPMENT - SCHUNK 3-jaw chuck with 220 mm diameter - Tailstock included - Machine is suitable for transport on a standard commercial truck

Leto izdelave: 2025, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Lifting height 10 m Lifting speeds 5/0.8 m/min Godevx E Ncepfx Afqott Trolley travel speeds 20/5 m/min FEM Group 2M Operating voltage 400 V Control voltage 230 V Flange width 300 mm Immediately available from stock

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C axis: main and counter spindles Number of linear slides: 2 pieces Gedpfxsvivx Ns Afqott Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours

Stanje: dober (rabljeno), Leto izdelave: 2019, Stroj ima 1500 ur vretena DMG Mori CLX 350 V 4, Gtsdpexy Hyzsfx Afqjt Leto izdelave 2019, Krmilje DMG Mori Slim Line / Siemens Shoptrun, Pomik X/Z 185/540 mm, Pomik Y osi 80 mm, Revolver z 12 orodji, Pogonska orodja, C-os, Merjenje orodij Tooleye, Trivpenjalna glava KNCS 225/66, Vpenjalni tulec, Držalo VDI 30, Visokotlačno hlajenje 12 bar, Kontra konica, Transporter ostružkov, Pripravljeno za podajalec palic.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, CNC krmilnik: M720BM Kapaciteta Pomik X-osi mm: 260 Pomik Y-osi mm: ±50 (100) Pomik Z-osi mm: 795 Dolžina struženja mm: 705 Maks. premer struženja mm: ø 356 Premer nad posteljo mm: ø 923,8 Premer nad prečno desko mm: 755 Kapaciteta za obdelavo palic mm: 80 C-os stopinje: 0,001° Zgornji revolver Število orodnih mest: 12 Hitrost pogonskih orodij vrt/min: 6.000 Pogonska moč pogonskih orodij kW: 5,5/3,7 (3 min/kont) Čas indeksiranja s: 0,25 Gsdexcqz Iopfx Afqott Glavno vreteno Hitrost vretena vrt/min: 4.000 Pogonska moč vretena kW: 18,5/15 (25% ED/kont) Premer izvrtine vretena mm: ø91 Konjiček Pomik konjička mm: 734 Držalo: MT5 Oprema Transporter za odrezke Roka za merjenje orodja

Stanje: dober (rabljeno), Leto izdelave: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Gtjdpev Drigefx Afqot Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travel distances: X-axis: 160 mm Z-axis: 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 rpm Max. torque C: 155 Nm Total connected load: Approx. machine weight: 3.7 t Approx. space requirement: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Stanje: rabljeno, Leto izdelave: 2000, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Gsdpfx Aeu Ixwiofqjtt Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm Control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter in front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill: ISO MK4 Tailstock quill travel: 500 mm stroke Main spindle power: 7.5 kW (100% duty: 11 kW) Electrical specification – voltage/frequency: 3/PE ~400V and 50/60Hz Total power consumption: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe features a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), max. speed 7,500 rpm Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders installed in the magazine, of which 4 pieces with collet chuck Coolant system, coolant supply via the tool turret Control cabinet with Rittal cooling unit type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool In standard condition.

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 92041, Table clamping surface: 410 x 900 mm Travel paths (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Required space: 2,600 x 2,000 x 2,300 mm Gjdpodhhprefx Afqjtt Weight: 3,500 kg