Avtomatska tračna žaga - vodoravna

KASTO SBA 280 AU-G

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 5164, Offer 23148 Technical specifications: - Equipped with hydraulic clamping and feed device - Cutting range: - Round: 320 mm - Square: 300 x 300 mm Kledpfx Afjq Evn Eo Nol - Max. cut-off length per single stroke: up to 400 mm - Multiple feed up to 10 x 400 mm - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speed infinitely variable: 20 – 100 rpm - Feed rate hydraulically adjustable, stepless - Coolant system - Material support height: 720 mm - Saw drive: 400 V / 2.5 kW - Installation dimensions (approx.): W 1950 x H 1250 x D 1500 mm - Weight (approx.): 1000 kg

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. Kedpofg E Hpsfx Af Njll - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: rabljeno, Leto izdelave: 2011, Bar diameter: 32 mm Spindle bore: 38 mm Turning length: 320 mm Spindle speed: 8,000 rpm C-axis: 0.001° Sub-spindle: Pick-up station: 32 Turning length: 150 mm Spindle speed: 8,000 rpm C-axis: 0.001° Number of tools: 4+7+6+10 = 27 Number of milling stations: 4+4 Control unit: Mitsubishi M70 Number of axes: 5 + 2x C-axis (7 total) Chip conveyor: yes (LNS) Total power requirement: 7.5/5.5 kW Machine weight: approx. 3,300 kg Space requirement: approx. 2.5 x 1.2 x 1.82 m plus FMB CNC sliding head lathe Citizen A32-VII PL, year of manufacture 08/2011 with FMB Turbo 3-36 bar feeder Very good condition! Kljdpfxew Ed Tfs Af Nel Main spindle motor and bearings are new. Includes all accessories, clamping devices, manuals.

Stanje: dober (rabljeno), Leto izdelave: 2004, številka stroja/vozila: A II 151768, Offer 25979 - Operating hours: 16,550 h Kljdpfxewrcq No Af Nol - Operating pressure: 10 bar - Delivery rate: 15.9 l/sec - Drive: 400 V / 7.5 kW - Motor speed: 3,000 rpm - Air receiver tank: 250 L - Required space: approx. W 700 x H 1,830 x D 1,050 mm - Weight: approx. 250 kg

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: nepreverjeno, Berstorff mixing mill 400 x 900 mm Kodpfx Afsr A Dfye Njll For more details, see the attached description!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Nosilec orodja: VDI 30 Revolverska glava za orodja: 12 pozicij Hitrost glavnega vretena: 5.000 vrt/min Pogonska moč: 16,5 kW Kedpsx Nnbhsfx Af Nell Vključno s podajalcem palic Vključno z dokumentacijo

Stanje: rabljeno, Leto izdelave: 2008, premer struženja: 275 mm, izvrtina vretena: 80 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.345 mm, skupna višina: 2.232 mm, skupna dolžina: 4.339 mm, skupna širina: 2.232 mm, skupna masa: 7.600 kg, Oprema: dokumentacija / priročnik, Mori Seiki NL 2500 SY / 1250 CNC stružnica z Y-osjo, gnanimi orodji in drugo glavno vreteno CNC krmilje MSX-850-III (Mitsubishi 720 BM) Premer struženja 275 / 366 mm Premer izvrtine vretena 80 mm Ksdpfx Afoxnmzhs Njll Hitrost vrtenja vretena 4000 min⁻¹ Glavni vretenski motor 18,5/15 kW Pomik X-osi 260 mm Pomik Y-osi +50 / -50 mm Pomik Z-osi: 1345 mm Pomik W-osi (protiprimež od glavnega vretena) 1275 mm Min. indeksiranje C-osi glavnega vretena 0,001° Število orodij v revolverju 12x Število gnanih orodij 12x Orodni konus BMT Podajalnik palic LNS Quick Load Servo III Vreteno gnana orodja 6000 min⁻¹ Za vsa vprašanja o stroju ali za dogovor o ogledu nas prosimo kontaktirajte po telefonu ali elektronski pošti. Vabimo vas, da si ogledate tudi naše druge oglase in pridobite celovit pregled nad našo zalogo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Kledpfxsw Rl S So Af Nsl Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 52.455 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2501-0154, stružna dolžina: 600 mm, premer struženja nad prečnim suportom: 140 mm, premer struženja: 300 mm, moč vretenovega motorja: 25.000 W, hitrost vretena (min.): 5.000 obr/min, največja hitrost vretena: 5.000 obr/min, pomik po osi Z: 900 mm, hitro pomikanje X-os: 3 m/min, hitri pomik os Y: 3 m/min, hitri pomik na osi Z: 3 m/min, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 4.000 obr/min, vrtilni moment: 239 Nm, prehod palice: 80 mm, hitrost pomika os X: 165 m/min, hitrost podajanja osi Y: 165 m/min, hitrost podajanja os Z: 220 m/min, skupna masa: 10.500 kg, Oprema: dokumentacija / priročnik, The machine is still in operation and can be inspected under working conditions at VOVU Machining in Uden. In total, there are 6 identical machines available here. Equipped with a Fanuc 310is control unit. Kjdpfx Afeur Hfzs Njll

Stanje: dober (rabljeno), Leto izdelave: 2011, GILDEMEISTER CNC twin-spindle turning center Model: CTX beta 1250 4 A Machine No.: 00700000211 Year of manufacture: 2011 Control: CNC path control incl. 19” TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G Power-on hours: 41,378 h Program run time: 24,814 h Kodjwcxlwjpfx Af Noll Technical data and equipment available on request