CNC stružnica

EMCO MaxxTurn 65

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with a Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Features integrated spindle motors, water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and sub-spindle. State-of-the-art SINUMERIK ONE control technology with ShopTurn conversational programming. Main spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0–5000 rpm Sub-spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0–7000 rpm Tool turret: • 12-position VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis • Travel: +/-40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/sub-spindle • Sinumerik ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remainder material detection • USB interface • Control cabinet air conditioning unit • Coolant system incl. reinforced pump (24 bar) • Chuck washing (additional pump 3.5 bar) • Parts ejector and flushing through sub-spindle Ppodpfxex E Dnce Agxor Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control languages: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows use of the sub-spindle with installed live center to support workpieces. Shaft parts can therefore be supported and machined in machines without a tailstock by using the sub-spindle. Max. contact force is limited to 50% of max. axis force. EMCO PROFI-NET ROBOTER INTERFACE: Interface for robotic integration. Implementation via HARTING plug. Signal exchange via Profinet. Safety signals are dual-channel/potential-free. Digitization package for Sinumerik: Condition monitoring SIEMENS ONE interface for connection to MDE/BDE systems. Standard information includes: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece-count pulse (M30) • Programmable pulse (M300) 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically actuated finished parts catcher for gentle unloading of finished parts. Finished parts are transferred into a catch box (standard) or onto a conveyor (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connection to the EMCO SL1200 bar loader. ...and more Machine is available immediately!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10014777, skupna masa: 1.300 kg, nosilnost: 210 kg, doseg roke: 2.696 mm, We offer industrial robots from the manufacturer KUKA. The scope of supply includes the robot arm, control cabinet, and the corresponding cables. The robots originate from a fully operational system and have been professionally dismantled. We conduct a functional test and inspect the robots. If interested, we can demonstrate the robots’ functions to ensure they meet your requirements. - Optional Upgrade for an Additional Charge - Ppedpfx Ajq Suwbsgxer We are pleased to introduce a new feature for our robots: the Siemens S7-1200 Profisafe safety controller. This controller enables seamless integration of an emergency stop, safety door, and start/stop interface via the Profisafe bus. The controller is completely configured and programmed, allowing you to easily implement a stand-alone solution with a robot and safety fence. Additionally, we can support you with commissioning if required. A 14-day return policy applies for this option; further warranty services are excluded. We maintain an extensive stock of these robots, and the stated prices correspond to a package price. Discounts for larger order quantities are negotiable. Please feel free to contact us again to discuss further details. Sale exclusively to commercial customers.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, CNC stružno-rezkalni center | EMCO MaxxTurn 65 Proizvodnja celovitih struženih delov, obseg premera 10–65 mm in dolžine 10–200 mm Ppjdpfx Ageyzywxexsr Krmiljenje FANUC 31iB, moč 29 kW, glavno in protivretence, maksimalna hitrost vretena 5.000/7.000 vrt./min., hodi X/Z = 260/610 mm, 12-pozicijski revolverski nosilec z gnanimi orodji (VDI 40), maks. premer/dolžina struženja = 320/550 mm, izmet obdelovanca Ogled možen kadarkoli po predhodnem dogovoru.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 100 h, največja hitrost vretena: 5.000 obr/min, skupna višina: 1.800 mm, skupna masa: 2.200 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 31t- Model B, število osi: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014 and features a robust FANUC 31i B control and a twin-spindle configuration with C and Y axes for complex machining operations. It is equipped with a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. This machine is ideal for precision turning and milling applications, offering a comprehensive solution for modern metalworking. Contact us for more information about this machine. Additional Equipment • Automatic bar loading magazine with adjustable part length and bar diameter • Remnant extraction system • Guide channel made of polyurethane plastic • Longitudinal movement shifting system Machine Advantages Qualitative Machine Advantages • No spindle reduction required Technical Machine Advantages • Cooling: Thermocompensation system • Axes: C-axis and Y-axis • System: Linear guide system, digital drive system • PART CATCHER Pneumatically operated part catcher for gentle unloading of finished components. Parts are transferred to a collecting box (standard) or onto a conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm • Tool system: 12-position VDI30 radial turret • Live tooling: up to 12 driven tools Pjdpfx Aex D H Sfegxepr • Subspindle speed range: 0-7000 rpm • Bar length capacity: 1200 - 3200 mm • Through-bore diameter: 20 - 65 mm • Feed speed: 0 - 627 mm/sec • Turning length: 650 mm Additional Information Control unit: Integrated PLC Features: Fully automatic work cycle, monitoring and error diagnosis (display output) Tools Max. power: 6.7 kW Max. torque: 25 Nm Speed range: 0-5000 rpm C-axis: Available Media Power supply: 200/220/400 V AC Air requirement: Min. 7 bar Air consumption: 45 L/min Installation position (mounting) The assembly kit includes vibration-damping, height-adjustable leveling feet and mounting brackets. Machine history Note: As-new condition, only 100 operating hours Dimensions Machine depth 4500 mm

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: Pjdpfeuxft Ejx Agxjpr The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Leto izdelave: 2005, stanje: zelo dobro (rabljeno),

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, številka stroja/vozila: S6AT2502, potovalna razdalja osi X: 250 mm, pomik osi Y: 40 mm, pomik po osi Z: 600 mm, največja hitrost vrtenja: 5.000 obr/min, število mest v zalogovniku orodij: 12, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 250 mm Ppedewvi Euspfx Agxer Travel Y-axis: mm Travel Z-axis: 600 mm Max. spindle speed: 5,000 rpm Feed force Y-axis: 7,000 N Rapid traverse: 12 m/min DRIVE & POWER Max. drive power: 6.7 kW Main spindle speed range: 0–5,000 rpm SUB-SPINDLE Chuck diameter: max. 200 mm Speed range: 0–7,000 rpm Travel range: max. 580 mm ELECTRICS Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 85 A MACHINE DETAILS Overall height: 2,100 mm Overall length: 5,000 mm Overall width: 2,000 mm Total weight: 8,000 kg Tool shank: 30 mm Control manufacturer: SIEMENS Control model: SINUMERIK 840D Number of tool magazine slots: 12 EQUIPMENT Infinitely variable speed setting Chip conveyor With Y-axis and sub-spindle Tool turret with 12 stations, all driven Tool holder: VDI 30 Incl. three-jaw chuck (RÖHM, Ø 250 mm)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 3.000 kg, Največja masa rotorja ---3000 kg (6613,87 lb) Ppodpfx Ager Dd Avexor Najmanjša masa rotorja ---30 kg (66,14 lb) Največji premer rotorja ---1400 mm (55,12 in) Najmanjši premer gredi ---20 mm (0,79 in) Največji premer gredi ---300 mm (11,81 in) Moč motorja ---11 kW (14,75 KM) Pogonska enota (standardno) ---11 kW (14,75 KM) Hitrost uravnoteženja ---0-3000 vrt/min (25 Hz) (nastavljiva navzgor in navzdol) Pogonska enota --- Samo jermen ali gred / jermen + gred Dolžina postelje ---3000 mm (118,11 in)

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 4.700 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S6CZ1151, izvrtina vretena: 65 mm, največja hitrost vretena: 5.000 obr/min, moč vretenovega motorja: 29.000 W, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, podajalnik palic, Jahr: 2011 Betriebsstunden: 4.700h (steigend) Drehdurchmesser: 65 mm CNC-Typ: Fanuc 18i-TB Anzahl der Revolver: 1 Ppsdpfx Agsxwp I Aoxsr Achsen: X, Y, Z und C Anzahl Revolverplätze: 12 Anzahl angetriebener Werkzeugplätze: 12 Haupt- und Gegenspindeldrehzahl: 5.000 U/min Leistung Haupt- und Gegenspindelmotor: 29 kW Abmessungen (L x B x H): 3.302,0 × 2.057,4 × 2.032,0 mm Gewicht: 5.700 kg Späneförderer IEMCA MASTER 880r Verso Stangenlader (3m Stangenlänge + Lademagazin) Zahlreiche mitgelieferte feste und angetriebene Werkzeughalter: - 3 axiale angetriebene Werkzeughalter - 4 radiale angetriebene Werkzeughalter - 2 schwenkbare angetriebene Werkzeughalter (0-90°) - 5 feste Drehmeißelhalter - 7 feste Bohrhalter - 1 Stechhalter 2 Backenfuttersätze (Haupt- und Gegenspindel). Die Maschine ist aktuell im Einsatz, kann aber innerhalb von 4 Wochen verfügbar gemacht werden. Die Abholung erfolgt am Standort (Saint Pierre en Faucigny). Verlade- und Transportkosten trägt der Käufer.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S6AW11S1, premer struženja nad prečnim suportom: 540 mm, stružna dolžina: 550 mm, premer struženja: 600 mm, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 800 mm, Machine with C-axis, E-axis, Y-axis, W-axis, and live tooling on all stations TECHNICAL DETAILS Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: 73 mm Psdow T Sq Topfx Agxopr Bar capacity: 65 mm Spindle speed: 0 – 5,000 rpm Spindle torque: max. 250 Nm Distance spindle to sub-spindle: 1,050 mm Sub-spindle: A2-6, travel: 800 mm, spindle: 105 mm, torque: 250 Nm Rapid traverse X/Y/Z axis: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1,000 rpm MACHINE DETAILS Operating pressure: 6 bar Total power consumption: 40 kVA Machine weight: approx. 5.7 t Machine dimensions (LxWxH): 2.2 x 3.4 x 2.4 m Transport dimensions: approx. 3.3 x 1.9 x 2.2 m Electrical configuration - voltage/frequency: 3 x 400 V / 50-60 Hz Dimensions chip conveyor (LxWxH): approx. 2.9 x 0.6 x 0.55 m (0.38 t) Dimensions chip tray (LxWxH): approx. 1.6 x 1.3 x 0.25 m (0.2 t) EQUIPMENT - Control cabinet equipped with Rittal brand cooler - Hinged belt chip conveyor - Chip tray - Air blow gun - No chuck included in sale

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Psdedkdi Tjpfx Agxspr Pressure: 1.6 MPa