EMAG VSC 250

EMAG VSC 250

Stanje: rabljeno, Leto izdelave: 2015, Technical details: Turning diameter: 200 mm Crsdpjq Sc Husfx Aplob Swing diameter: 260 mm Turning height: 60 mm

Stanje: rabljeno, Leto izdelave: 2014, Maks. premer struženja: 160 mm Maks. višina struženja: 150 mm Maks. premer obdelovanca: 100 mm Maks. višina obdelovanca: 150 mm Maks. število vrtljajev: 6.000 min⁻¹ Pomik - X: 700 mm Pomik - Z: 375 mm C-os: 360° Krmiljenje: FANUC Vertikalni stružni stroj | EMAG - VL2 Crodpfx Aeqvd Iuepljb Opremljen s trakom za transport obdelovancev. Stroj je v zelo dobrem stanju. Upoštevajte, da so tehnični podatki prevzeti iz primerljivih strojev.

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M250.81009, Caracteristici tehnice: # Acționare principală: * Putere conectată: 400 V/50 Hz / 43 kW * Puterea motorului arborelui principal (100% ED / 40% ED): 18 kW / 28 kW * Cuplu arbore principal: 300 Nm * Plaja de rotații: 0-4500 rpm * Cap arbore: DIN 55026-A6 # Zonă de lucru: * Avans rapid axa X: 60 m/min * Avans rapid axa Z: 30 m/min * Forță de avans axa X: 10 kN * Forță de avans axa Z: 10 kN # Comandă numerică: * Siemens SINUMERIK 840Dsl * Monitor TFT 15 inch. # Precizie de lucru: * Axe (X / Z): ±0,001 mm * Arbore (axa C): ±0,01° # Portscule: * Turela cu flanșă EMAG generația C361 - Capto C5 * Diametru corp portsculă: TN340009 * Dimensiuni maxime sculă: dependente de piesă * Timp schimbare sculă (turelă / sculă antrenată): 0,03 min / 0,04 min * Turație maximă sculă antrenată: 6000 rpm * Cuplu maxim sculă antrenată (100% ED / 10% ED): 15 Nm/3,5 kW / 40 Nm/8,5 kW # Sistem de răcire: * Presiune livrare standard / maximă: 7 bar * Interval presiune răcire internă: 7 bar (neajustabilă) * Capacitate rezervor lichid de răcire: 360 litri # Dispozitiv colector piese: * Nu există colector piese; piesele sunt încărcate și evacuate automat din utilaj # Condiții ambientale (temperatură / umiditate): până la cca 30°C / max. 50% * Nivel zgomot (Presiune / Putere acustică): 78 dB(A) # Generalități: * Dimensiuni mașină (L x l x h): 3900 mm x 1500 mm x 3200 mm * Greutate: aprox. 7000 kg Principalele funcții și caracteristici: # Construcție verticală: Evacuare optimă a șpanului și acces facil la încărcare/descărcare. # Comandă: Siemens SINUMERIK 840Dsl cu PLC integrat S7-300 și monitor TFT de 15 inch. # Precizie ridicată: Precizie de poziționare pe axe X și Z de ±0,001 mm. # Arbore principal: Putere mare și plajă largă de viteze de rotație. # Automatizare: Încărcarea și descărcarea pieselor se realizează prin automatizare integrată. # Scuri antrenate (live tools): Extind gama de prelucrare pentru operații de găurire și frezare. # Transportor de șpan. # Menghină expansibilă EMB3 Autoblock instalată pe mandrină. # Portscule Capto C5 pe turelă (prelucrare externă/internă 2 bucăți & 2 scule antrenate). # Monitorizare sarcină scule cu funcția Artis disponibilă. Cjdpfxsxvx T So Aplerb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 38.546 h, potovalna razdalja osi X: 745 mm, pomik po osi Z: 300 mm, moč vretenovega motorja: 18.000 W, največja hitrost vretena: 4.500 obr/min, skupna višina: 3.200 mm, skupna širina: 1.500 mm, skupna masa: 7.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840Dsl with integrated PLC S7-300, natančnost pozicioniranja: 1 mm, največja dolžina izdelka: 3.900 mm, število mest v zalogovniku orodij: 12, število osi: 2, This EMAG VSC 250 vertical turning machine was manufactured in 2011. It features a Siemens SINUMERIK 840Dsl control, a robust hydraulic 6-jaw chuck, and a turret with 12 tool positions. With a spindle speed of up to 4,500 rpm and a main spindle drive power of 28 kW at 40% duty cycle, it is ideally suited for precise and efficient machining. For further information about this vertical lathe, please contact us. Additional Equipment • EMAG hydraulic 6-jaw special chuck with face clamping device and central lubrication • 15-inch TFT monitor • V24 interface Machine Advantages Qualitative Machine Advantages • Machine operated in single-shift operation • Maximum ambient temperature: up to 30°C • Maximum humidity: 50% • Sound pressure level: 78 dB(A) • Second unit with YOM 2014 available Technical Machine Advantages • Spindle torque: 300 Nm • VDI shaft diameter: 40 mm • Maximum speed of driven tools: 6,000 rpm • Maximum torque of driven tools: 40 Nm / 8.5 kW • Coolant system standard delivery pressure: 7 bar • Maximum delivery pressure: 7 bar • Internal coolant supply pressure range: 7 bar (not adjustable) • Coolant tank capacity: 360 liters • Chuck model: 6AGF 260 K6 K14 • Chuck diameter: 260 mm • Chuck weight: 57 kg • Maximum clamping force for I.D. clamping (50 bar): 12.8 kN • Maximum clamping force for O.D. clamping (50 bar): 4.2 kN Additional Information Machine still connected to power Dimensions Machine depth: 3,900 mm Credpfx Ajy Ehckopljb Technical Specification Driven tools: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 7.950 h, Funkcionalnost: popolnoma funkcionalen, Vertikalni obdelovalni center / Vertikalni stružni stroj Proizvajalec: EMAG Model: VL6 (FANUC) Leto izdelave: 2021 Obratovalne ure: cca. 7950 Skupna teža: 10,5 t Glavno vreteno: 28,5 kW Moč pri 40/100 % ED: 41/28,5 kW Navor pri 40/100 % ED: 491/340 Nm Polna moč pri hitrosti vretena: 800 min⁻¹ Najv. število vrtljajev: 3100 min⁻¹ Premični enoti X, Z Crodpswzwu Ijfx Aplsb Pogonska enota revolverja za gnana orodja (C362) s centralno dovodom hladilne tekočine v orodje Najv. število vrtljajev: 9600 min⁻¹ Polna moč pri 3000 min⁻¹ Navor pri 100 % ED: 33 Nm / 10,4 kW Navor pri 40 % ED: 44 Nm / 13,8 kW Navor pri 10 % ED: 56 Nm / 17,6 kW Držalo za gnana orodja: 12 x BMT65 Skladišče in transportni sistem za obdelovance, transporter tipa O (GO 240") sistem nosilnih prizmov za 10 obdelovancev Višina obdelovanca: maks. 250 mm Teža obdelovanca: maks. 40 kg Set (10 kos) nosilnih prizmov za premer obdelovanca: 150–300 mm Zračno pihalo za obdelovanec in vpenjalno pripravo (Pick-Up) Dovod hladilne tekočine: 15 bar Zmogljivost črpalke: cca. 80 l/min pri 15 bar Hladilna enota (6,5 kW, voda-zrak) Dvostranski filter hladilne tekočine, ročno preklopljiv Filtrirna finost: 100 μm, z električnim in mehanskim indikatorjem kontaminacije Transporter odrezkov, verižni tip – odvod zadaj Izvedba s tečajnim trakom: odvod zadaj Višina izmeta odrezkov: 1.100 mm (z integriranim rezervoarjem za hladilno tekočino, kapaciteta cca. 500 l) Izvleček emulzijske meglice: zmogljivost cca. 800 m³/h Izpiralna pištola Merjenje obdelovanca s sondo Pihanje sonde Nadzor trajanja orodja (upravljanje nadomestnih orodij) 3-barvni signalni stolp Hitromenjalna vpenjalna glava SMW autoblok KCNS-N400-128 maks. = 3500 min⁻¹ Set trdih osnovnih čeljusti Set mehkih vršnih čeljusti Programska oprema Navodila za uporabo / Navodila za vzdrževanje

Stanje: dober (rabljeno), Leto izdelave: 2002, Machine type: CNC lathe Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Serial number: M02.43446 Year of manufacture: 2002 Available immediately Crsdpfx Ajkyrwwspljb Located ex works for self-dismantling Optional: We can offer dismantling and loading services

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Na voljo je kombiniran vertikalni CNC stružno-brušilni center EMAG. Premer vpenjalne glave: 250 mm, največji premer obdelave: 260 mm, pomik X/Z: 680 mm/200 mm, hitri pomik X/Z: 45 m/min/30 m/min, hitrost brusilnega vretena: 45000 vrt/min, število orodniških mest: 12, dimenzije košare X/Y: 400 mm/600 mm, število zloženih košar: 3. Dimenzije stroja X/Y/Z: cca 3200 mm/1900 mm/2650 mm, teža: cca 8000 kg, krmiljenje: Siemens 840DS, delovne ure: cca 35000 h, programske ure: cca 22000 h. Dokumentacija je na voljo. Ogled na lokaciji z električnim priklopom je mogoč. Codpfx Asx Dm Dzjplorb

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, leto zadnje generalne obnove: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General Description: Year of manufacture: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control system: Fanuc 21i-T Swing diameter: approx. 210 mm Maximum speed: 6,500 rpm Turret: VDI 40 mm, 12 stations The machine does not have any live tooling. Hinged belt chip conveyor Spindle mount: Size 5 Conveyor belt for finished parts Machine weight: approx. 5.5 t Cjdpetpu Szsfx Aplsrb The following work was carried out as part of the machine’s overhaul in 2023: -The machine was completely disassembled, cleaned, and repainted -The main spindle was newly mounted -The guides and guide shoes on X and Z axes were replaced -The ball screw spindle on the X and Z axes was replaced -New unit for central lubrication with new hoses -The hydraulic unit was checked and serviced. The drive coupling between motor and pump was replaced -The cooling unit was checked and serviced: Temperature differential controller was replaced -The clamping cylinder was re-bedded and re-sealed -The gearbox on the A-axis was newly mounted, and the coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Operator panel was replaced -New monitor -New internal lighting -Turret was disassembled, wear parts checked, cleaned, and re-sealed -Turret encoder and encoder wheel cleaned -Linear measuring systems in X and Z axes disassembled and cleaned -Springs at the pick-up station replaced -Motors for X and Z axes checked for bearing damage -Windows on work door replaced -Chip conveyor completely disassembled, newly mounted, cleaned, and repainted -Of course, various small parts were also replaced on the machine The product has been described by us with the utmost care. The description is non-binding and should be verified during inspection.

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Credpfxjia Rtde Aplob Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.500 mm, skupna dolžina: 4.500 mm, skupna višina: 3.200 mm, Offered is a double-spindle pick-up lathe EMAG VSC 250 DUO. There are 2 almost identical machines of this type available. Each machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine is capable of either machining 2 identical workpieces with the same operation simultaneously, or producing one workpiece in two consecutive machining steps. The VSC 250 DUO will be completely overhauled before delivery and will receive a control system upgrade to Siemens Sinumerik ONE. If required, the machine can be equipped with further peripherals (chip conveyor, coolant system, external automation, etc.). Cjdsr Nc Ufjpfx Aplsrb CONTROL Siemens Sinumerik One TECHNICAL DATA Workpiece diameter: max. 250 mm Workpiece height: max. 150 mm Chuck diameter: 250/315 mm Swing diameter: 350 mm X-axis travel: 745 mm Z-axis travel: 300 mm TOOL CARRIERS Work area 1: 1x EMAG disc turret, 12x VDI 50 stations, no driven tools Work area 2: 1x EMAG disc turret, 12x VDI 50 stations, with driven tools Price, delivery time, and machine configuration upon request.

Stanje: rabljeno, Leto izdelave: 2024, INDEX MS22-8 Proizveden: 2024 2 NCU (4) Y-osovine SL upravljanje Radni sati: 1.000 Dostupan kao komplet (turnkey) Lokacija: Europa 4-metarski IEMCA SIR MS22-8/43/P Uvlačivač štapnog materijala s regalom, 50 Hz D9-13-19-25 Dužina šipke: 4.300 mm s jedinicom za bušenje i uređajem za podmazivanje minimalnom količinom Dodatni senzor za kraj šipke Kapacitet šipki 500 mm (D12-D24) Kapacitet šipki 340 mm (D5-D11) Dodatni lanac skladištenja za 22 šipke s Profinet sučeljem. 1 11007253 (21711) 1 set (8 komada) potiskivača šipki, vanjsko stezanje za promjere šipki D7-D10 mm, unutarnje stezanje za promjere šipki D13-D18 mm, sastav: 8 potiskivača šipki D12 8 rotirajućih čahura D12 1 10287026 (21712) 1 set (8 komada) potiskivača šipki, vanjsko stezanje za promjere šipki D11-D16 mm, unutarnje stezanje za promjere šipki D19-D24 mm, sastav: 8 potiskivača šipki D18 8 rotirajućih čahura D18 1 10536056 (21713) 1 set (8 komada) potiskivača šipki za promjere šipki D17 mm-D22 mm, sastav: 8 potiskivača šipki D23 8 rotirajućih čahura D23 1 10414481 (21702) Cedpjxnrtcofx Aplerb 1 set (8 komada) unutarnjih steznih čahura D12 mm za promjere šipki D13 mm - D18 mm Promjer bušenja D8 mm. 1 10472413 (21704) 1 set (8 komada) vanjskih graničnika D12 mm za promjere šipki D13 mm - D18 mm predtokareni. 1 10264327 (21703) 1 set (8 komada) unutarnjih steznih čahura D18 mm za promjere šipki D19 mm - D24 mm Promjer bušenja D15 mm. 1 10058206 (21705) 1 set (8 komada) vanjskih graničnika D18 mm za promjer šipki D19 mm - D24 mm predtokareni. 1 12123486 Bušilica za bušaću jedinicu, sastoji se od: 1 svrdlo s izmjenjivim pločicama D15 mm 10 izmjenjivih umetaka za čelik 2 punokarbidske bušilice D8 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 72.284 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 685 mm, dolžina podajanja os Z: 200 mm, potovalna razdalja osi X: 685 mm, pomik po osi Z: 200 mm, zunanji premer vpenjalne glave: 250 mm, hitro pomikanje X-os: 45 m/min, hitri pomik na osi Z: 30 m/min, skupna dolžina: 3.100 mm, skupna višina: 2.650 mm, skupna širina: 4.000 mm, največja hitrost vrtenja: 6.000 obr/min, vrtilni moment: 460 Nm, skupna masa: 7.800 kg, model krmilnika: Siemens 840D, vrsta upravljanja: CNC krmiljenje, Oprema: hladilna enota, For sale is an EMAG VSC250, year of manufacture 2008. Equipped with a Siemens 840 D control system. Cjdpfx Ajw Dyqdepljrb Features: - Infeed and outfeed conveyor (O-conveyor) - Pneumatically controlled transfer device - Punching unit - Chip conveyor (discharge to the left) - Coolant system - Tool turret with 12x VDI40 holders The machine is currently under power and available for inspection.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2023, A mechanically and electrically overhauled vertical pick-up turning center VSC 250, refurbished by EMAG, is being offered. The control system has been upgraded to Siemens Sinumerik One. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-belt, L-belt, turnover device) and additional peripherals such as chip conveyors, coolant systems, etc. CONTROL Siemens Sinumerik One TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm Travel X-axis: 860 mm Travel Z-axis: 200 mm MAIN SPINDLE Crodpforq Damex Apljb Power: 28 kW TOOL CARRIER EMAG disc-type turret, 12x VDI 40 Delivery time and additional equipment for the machine to be agreed upon.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Offered is a double-spindle pick-up lathe EMAG VSC 500 DUO. Codpst Du Tdsfx Aplorb The machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine allows for either simultaneous machining of 2 identical workpieces with the same operation, or sequential machining of one workpiece in two consecutive processes. Depending on requirements, the machine can be equipped with additional peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL SYSTEM Siemens 840 Dsl TECHNICAL DATA Workpiece diameter: max. 440 mm Workpiece height: max. 250 mm Chuck diameter: 450 mm Swing diameter: 550 mm X-axis travel: 925 mm Z-axis travel: 400 mm TOOL CARRIERS 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time, and machine configuration upon request.

Stanje: rabljeno, Leto izdelave: 2004, Turning diameter 250 mm Turning length 100 mm Control SIEMENS 840 D Total power requirement 35 kW Machine weight approx. 7500 kg Required space approx. m E M A G Vertical CNC hard turning and grinding machine with tool turret and automatic workpiece feeder Type VSC 250 DS Year of construction 2004 # M7 28.69324 Max. turning diameter 250 mm Turning length inside/outside approx. 100 mm Workpiece length min./max. 29 – 100 mm 6-position tool turret diameter or swing circle 480/790 mm Slide travels X / Z (workpiece slide!) / stroke 680 / 400 / 200 mm Feed / rapid traverse X/Z 45 / 30 m / min. Feed force X/Z 5.5 / 11 kN Spindle speeds 4,300 / 6,000 rpm Spindle drive approx. 28 kW Total drive approx. 35 kW - 380 V – 50 Hz Weight 7,500 kg Accessories / Special equipment • CNC path control SIEMENS 840 D with color screen, graphics, menu-guided dialog programming, all common options, cycles and subprograms, etc. • 6-station tool turret with 6 tool holders (diam. 40 mm) without motorized drive, but as a swivel axis (B-axis), double bearing and with direction logic • 2 GMN grinding spindles on turret positions T 3 and T 6, speeds approx. 42,000 rpm and 18,000 rpm, fitted once with CBN wheel and once with ceramic pin • Workpiece feed unit with circulation system via drag frame for workpieces approx. 130 mm • MARPOSS MIDA – tactile measuring device for dimensional and final measurement during workpiece changeover • NORGREN air gap measuring device (?), hydraulic weight compensation for main spindle • SMW-Autobloc 3-jaw diaphragm chuck (for easier gripping of raw parts) approx. Ø 250 mm, with clamping force monitoring • HYFRA recooling unit for main spindle cooling and thermal stabilization of the machine frame, sophisticated SEITZ paper band filter system and extendable chip conveyor, coolant radiator for grinding emulsion, oil mist extraction, magnetic separator, central lubrication, etc. Crodpfx Apjt Hxa Tsljb Vertical CNC turning machines offer a thermally stable design (chips do not fall into the machine bed) and fast workpiece changeover times (pick-up system via main spindle) and a stable tool arrangement that also enables non-turning operations. Here, hardened gears were hard-turned and ground. Condition: good - ready for demonstration shortly Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice