CNC stružnica
EMAG VSC 250 DS

Name: EMAG VSC 250 DS
Brand: EMAG
Availability: InStock

Leto izdelave

2004

Stanje

Rabljeno

Lokacija

Metzingen

Podatki o stroju

Oznaka stroja:: CNC stružnica

Proizvajalec:: EMAG

Model:: VSC 250 DS

Leto izdelave:: 2004

Stanje:: rabljeno

Cena in lokacija

Lokacija:: Metzingen

Pokliči

Podrobnosti ponudbe

ID oglasa:: A16567326

Referenčna številka:: 1049-706038

Posodobitev:: nazadnje dne 17.07.2024

Opis

Turning diameter 250 mm
Turning length 100 mm
Control SIEMENS 840 D
Total power requirement 35 kW
Machine weight approx. 7500 kg
Required space approx. m
E M A G
Vertical CNC hard turning and grinding machine with tool turret
and automatic workpiece feeder Type VSC 250 DS
Year of construction 2004 # M7 28.69324

Max. turning diameter 250 mm
Turning length inside/outside approx. 100 mm
Workpiece length min./max. 29 – 100 mm

6-position tool turret diameter or swing circle 480/790 mm

Slide travels X / Z (workpiece slide!) / stroke 680 / 400 / 200 mm
Feed / rapid traverse X/Z 45 / 30 m / min.
Feed force X/Z 5.5 / 11 kN

Spindle speeds 4,300 / 6,000 rpm
Ledpfot Hxa Tsx Ahujrn

Spindle drive approx. 28 kW
Total drive approx. 35 kW - 380 V – 50 Hz
Weight 7,500 kg

Accessories / Special equipment

• CNC path control SIEMENS 840 D with color screen, graphics, menu-guided dialog programming, all common options, cycles and subprograms, etc.
• 6-station tool turret with 6 tool holders (diam. 40 mm) without motorized drive, but as a swivel axis (B-axis), double bearing and with direction logic
• 2 GMN grinding spindles on turret positions T 3 and T 6, speeds approx. 42,000 rpm and 18,000 rpm, fitted once with CBN wheel and once with ceramic pin
• Workpiece feed unit with circulation system via drag frame for workpieces approx. 130 mm
• MARPOSS MIDA – tactile measuring device for dimensional and final measurement during workpiece changeover
• NORGREN air gap measuring device (?), hydraulic weight compensation for main spindle
• SMW-Autobloc 3-jaw diaphragm chuck (for easier gripping of raw parts) approx. Ø 250 mm, with clamping force monitoring
• HYFRA recooling unit for main spindle cooling and thermal stabilization of the machine frame, sophisticated SEITZ paper band filter system and extendable chip conveyor, coolant radiator for grinding emulsion, oil mist extraction, magnetic separator, central lubrication, etc.

Vertical CNC turning machines offer a thermally stable design (chips do not fall into the machine bed) and fast workpiece changeover times (pick-up system via main spindle) and a stable tool arrangement that also enables non-turning operations.
Here, hardened gears were hard-turned and ground.

Condition: good - ready for demonstration shortly
Delivery: ex stock - as inspected
Payment: strictly net - upon receipt of invoice

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2005

212 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 7123 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

CNC stružnica Reinecker Karstens Kopp - EMAG VSC 250 DS

Grävenwiesbach

676 km

CNC stružnica
Reinecker Karstens Kopp - EMAGVSC 250 DS

35.000 €

Fiksna cena plus DDV

Pokliči

Stanje: dober (rabljeno), Leto izdelave: 2002, Machine type: CNC lathe Lsdpokyrwwsfx Ahuorn Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Serial number: M02.43446 Year of manufacture: 2002 Available immediately Located ex works for self-dismantling Optional: We can offer dismantling and loading services

Poglej podrobnosti

Mali oglas

Stroj za valjanje navojev PROFIROLL BAD DUEBEN ROLLEX

Metzingen

506 km

Stroj za valjanje navojev
PROFIROLL BAD DUEBENROLLEX

Pokliči

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Ljdpfst Hw N Tox Ahujrn Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Poglej podrobnosti

Mali oglas

CNC stružno-brušilni center EMAG VSC 250 DS

Nemčija

650 km

CNC stružno-brušilni center
EMAGVSC 250 DS

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Na voljo je kombiniran vertikalni CNC stružno-brušilni center EMAG. Premer vpenjalne glave: 250 mm, največji premer obdelave: 260 mm, pomik X/Z: 680 mm/200 mm, hitri pomik X/Z: 45 m/min/30 m/min, hitrost brusilnega vretena: 45000 vrt/min, število orodniških mest: 12, dimenzije košare X/Y: 400 mm/600 mm, število zloženih košar: 3. Dimenzije stroja X/Y/Z: cca 3200 mm/1900 mm/2650 mm, teža: cca 8000 kg, krmiljenje: Siemens 840DS, delovne ure: cca 35000 h, programske ure: cca 22000 h. Dokumentacija je na voljo. Ogled na lokaciji z električnim priklopom je mogoč. Lredex Dm Dzspfx Ahuen

Poglej podrobnosti

Mali oglas

Nemčija

780 km

Navpična stružnica
EMAGVSC 250 DS

Pokliči

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Lsdpfx Asia Rtdohuorn Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Poglej podrobnosti

Mali oglas

Fuente de Cantos

1.957 km

SPLINE VOZNI
EX CELL OROTO FLO 3225

Pokliči

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 550-235-ELD, GENERAL CHARACTERISTICS Max. rolling diameter: 41 mm Max./Min. module range: 1.5 / 0.39 Max. rolling width: 92 mm Max. stroke of the tool holder slide: 760 mm Max. rack length: 610 mm Lsdpfx Ajd Nw Ttohuern Max./Min. diametral pitch: 20/40-32/64 Serial Number: 550-235-ELD ELECTRICAL CHARACTERISTICS Main motor power: 15 HP

Poglej podrobnosti

Mali oglas

Stroj za rezkanje zobnikov EMAG Koepfer K200

Nemčija

557 km

Stroj za rezkanje zobnikov
EMAG KoepferK200

Pokliči

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 3 kg, dolžina podajanja os X: 100 mm, dolžina pomika po osi Y: 100 mm, dolžina podajanja os Z: 200 mm, premer obdelovanca (maks.): 180 mm, dolžina rezkanja: 200 mm, skupna masa: 5.000 kg, največja hitrost vrtenja: 3.000 obr/min, vrtljajska hitrost (min.): 400 obr/min, premer orodja: 80 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Stroj se popolnoma razstavi in na novo sestavi. Med obnovo se vgrajuje najsodobnejša tehnika in najnovejše kakovostne komponente. Po končani obnovi je stroj v tehnično in vizualno brezhibnem stanju – zanesljiv, zmogljiv in pripravljen za prihodnost. Oprema in konfiguracija stroja sta lahko popolnoma prilagojeni vašim proizvodnim zahtevam – za največjo produktivnost v vašem obratu. Ledpfxjx Af A Hs Ahuern

Poglej podrobnosti

Mali oglas

Navpična stružnica za struženje EMAG VL6

Wrocław

524 km

Navpična stružnica za struženje
EMAGVL6

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 7.950 h, Funkcionalnost: popolnoma funkcionalen, Vertikalni obdelovalni center / Vertikalni stružni stroj Proizvajalec: EMAG Model: VL6 (FANUC) Leto izdelave: 2021 Obratovalne ure: cca. 7950 Skupna teža: 10,5 t Glavno vreteno: 28,5 kW Moč pri 40/100 % ED: 41/28,5 kW Navor pri 40/100 % ED: 491/340 Nm Polna moč pri hitrosti vretena: 800 min⁻¹ Najv. število vrtljajev: 3100 min⁻¹ Premični enoti X, Z Pogonska enota revolverja za gnana orodja (C362) s centralno dovodom hladilne tekočine v orodje Najv. število vrtljajev: 9600 min⁻¹ Polna moč pri 3000 min⁻¹ Lrsdpfxewzwu Ie Ahusn Navor pri 100 % ED: 33 Nm / 10,4 kW Navor pri 40 % ED: 44 Nm / 13,8 kW Navor pri 10 % ED: 56 Nm / 17,6 kW Držalo za gnana orodja: 12 x BMT65 Skladišče in transportni sistem za obdelovance, transporter tipa O (GO 240") sistem nosilnih prizmov za 10 obdelovancev Višina obdelovanca: maks. 250 mm Teža obdelovanca: maks. 40 kg Set (10 kos) nosilnih prizmov za premer obdelovanca: 150–300 mm Zračno pihalo za obdelovanec in vpenjalno pripravo (Pick-Up) Dovod hladilne tekočine: 15 bar Zmogljivost črpalke: cca. 80 l/min pri 15 bar Hladilna enota (6,5 kW, voda-zrak) Dvostranski filter hladilne tekočine, ročno preklopljiv Filtrirna finost: 100 μm, z električnim in mehanskim indikatorjem kontaminacije Transporter odrezkov, verižni tip – odvod zadaj Izvedba s tečajnim trakom: odvod zadaj Višina izmeta odrezkov: 1.100 mm (z integriranim rezervoarjem za hladilno tekočino, kapaciteta cca. 500 l) Izvleček emulzijske meglice: zmogljivost cca. 800 m³/h Izpiralna pištola Merjenje obdelovanca s sondo Pihanje sonde Nadzor trajanja orodja (upravljanje nadomestnih orodij) 3-barvni signalni stolp Hitromenjalna vpenjalna glava SMW autoblok KCNS-N400-128 maks. = 3500 min⁻¹ Set trdih osnovnih čeljusti Set mehkih vršnih čeljusti Programska oprema Navodila za uporabo / Navodila za vzdrževanje

Poglej podrobnosti

Mali oglas

Stroj za rezkanje zobnikov - vertikalni GLEASON- PFAUTER P 1600

Nemčija

796 km

Stroj za rezkanje zobnikov - vertikalni
GLEASON- PFAUTERP 1600

Pokliči

Stanje: rabljeno, Leto izdelave: 2007, x-pomik 900 mm y-pomik 300 mm z-pomik 1000 mm Krmiljenje Siemens Sinumerik 840D Premer obdelovanca - max. 1600 mm Modul - max. 20 mm Premer glavnega kroga 350 mm Premer rezkalne osi 375 mm Skupna priključna moč 80 kVa Teža stroja pribl. 33,5 t Potrebni prostor pribl. 10,530 x 6,375 x 4,680 m Hitrost podajal: - X-os 1 do 3000 mm/min - Y-os 1 do 3000 mm/min - Z-os 1 do 4000 mm/min Hitrosti vreten v 1/min: - Orodje 26 do 265 - Delovna miza 0 do 8 Oprema/pribor: - Motorna rezkalna glava M 2 - Rezkalne osi - Oljni hladilnik Ljdpjw Rrb Hjfx Ahuern - Tehnična dokumentacija

Poglej podrobnosti

Mali oglas

Vertikalni stružilni center z dvojnim vretenom EMAG VSC 250 DUO

Eislingen/Fils

489 km

Vertikalni stružilni center z dvojnim vretenom
EMAGVSC 250 DUO

Pokliči

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.500 mm, skupna dolžina: 4.500 mm, skupna višina: 3.200 mm, Offered is a double-spindle pick-up lathe EMAG VSC 250 DUO. Lrjdpfxjr Nc Ufs Ahuon There are 2 almost identical machines of this type available. Each machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine is capable of either machining 2 identical workpieces with the same operation simultaneously, or producing one workpiece in two consecutive machining steps. The VSC 250 DUO will be completely overhauled before delivery and will receive a control system upgrade to Siemens Sinumerik ONE. If required, the machine can be equipped with further peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL Siemens Sinumerik One TECHNICAL DATA Workpiece diameter: max. 250 mm Workpiece height: max. 150 mm Chuck diameter: 250/315 mm Swing diameter: 350 mm X-axis travel: 745 mm Z-axis travel: 300 mm TOOL CARRIERS Work area 1: 1x EMAG disc turret, 12x VDI 50 stations, no driven tools Work area 2: 1x EMAG disc turret, 12x VDI 50 stations, with driven tools Price, delivery time, and machine configuration upon request.

Poglej podrobnosti

Mali oglas