Navpična stružnica

EMAG VSC 250

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, potovalna razdalja osi X: 745 mm, pomik po osi Z: 300 mm, moč vretenovega motorja: 18.000 W, največja hitrost vretena: 4.500 obr/min, skupna višina: 3.200 mm, skupna masa: 7.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840Dsl, število osi: 2, This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28 kW output at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control unit and a robust 12-position EMAG flange turret, it ensures precise and efficient operation. With its special hydraulic chuck, it is ideal for machining workpieces up to 6 kg. For further information regarding this vertical lathe, please contact us. Additional Equipment • Coolant tank capacity: 360 liters Gjdpeytfppjfx Ad Ajtw Machine Advantages Technical Advantages • High working accuracy, rapid traverse rates, high maximum speed of driven tools • Machine from single-shift operation • Maximum ambient temperature: up to 30°C • Maximum humidity: 50% • Sound pressure level: 78 dB(A) Additional Information Machine still under power Technical Specification Through-spindle coolant: Yes Dimensions Machine depth: 3900 mm

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07-16 1990, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 800 mm, Na prodaj je stroj v dobrem stanju, kot je prikazano na slikah, izdelan leta 1990 in opremljen z upravljanjem NCT 90. Zelo malo uporabljen, prodaja se zaradi neizkoriščenosti. Skupna teža stroja je 33 ton. Stroj je popolnoma delujoč. Razstavljanje in transport sta odgovornost kupca. Gjdpfx Asw Sx Agod Aotw

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M250.81009, Caracteristici tehnice: # Acționare principală: * Putere conectată: 400 V/50 Hz / 43 kW * Puterea motorului arborelui principal (100% ED / 40% ED): 18 kW / 28 kW * Cuplu arbore principal: 300 Nm * Plaja de rotații: 0-4500 rpm * Cap arbore: DIN 55026-A6 # Zonă de lucru: * Avans rapid axa X: 60 m/min * Avans rapid axa Z: 30 m/min * Forță de avans axa X: 10 kN * Forță de avans axa Z: 10 kN # Comandă numerică: * Siemens SINUMERIK 840Dsl * Monitor TFT 15 inch. # Precizie de lucru: * Axe (X / Z): ±0,001 mm * Arbore (axa C): ±0,01° # Portscule: * Turela cu flanșă EMAG generația C361 - Capto C5 * Diametru corp portsculă: TN340009 * Dimensiuni maxime sculă: dependente de piesă * Timp schimbare sculă (turelă / sculă antrenată): 0,03 min / 0,04 min * Turație maximă sculă antrenată: 6000 rpm * Cuplu maxim sculă antrenată (100% ED / 10% ED): 15 Nm/3,5 kW / 40 Nm/8,5 kW # Sistem de răcire: * Presiune livrare standard / maximă: 7 bar * Interval presiune răcire internă: 7 bar (neajustabilă) * Capacitate rezervor lichid de răcire: 360 litri # Dispozitiv colector piese: * Nu există colector piese; piesele sunt încărcate și evacuate automat din utilaj # Condiții ambientale (temperatură / umiditate): până la cca 30°C / max. 50% * Nivel zgomot (Presiune / Putere acustică): 78 dB(A) # Generalități: * Dimensiuni mașină (L x l x h): 3900 mm x 1500 mm x 3200 mm * Greutate: aprox. 7000 kg Principalele funcții și caracteristici: # Construcție verticală: Evacuare optimă a șpanului și acces facil la încărcare/descărcare. # Comandă: Siemens SINUMERIK 840Dsl cu PLC integrat S7-300 și monitor TFT de 15 inch. # Precizie ridicată: Precizie de poziționare pe axe X și Z de ±0,001 mm. # Arbore principal: Putere mare și plajă largă de viteze de rotație. # Automatizare: Încărcarea și descărcarea pieselor se realizează prin automatizare integrată. # Scuri antrenate (live tools): Extind gama de prelucrare pentru operații de găurire și frezare. Gtedpfxsxvx T Ss Ad Ajw # Transportor de șpan. # Menghină expansibilă EMB3 Autoblock instalată pe mandrină. # Portscule Capto C5 pe turelă (prelucrare externă/internă 2 bucăți & 2 scule antrenate). # Monitorizare sarcină scule cu funcția Artis disponibilă.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Na voljo je kombiniran vertikalni CNC stružno-brušilni center EMAG. Premer vpenjalne glave: 250 mm, največji premer obdelave: 260 mm, pomik X/Z: 680 mm/200 mm, hitri pomik X/Z: 45 m/min/30 m/min, hitrost brusilnega vretena: 45000 vrt/min, število orodniških mest: 12, dimenzije košare X/Y: 400 mm/600 mm, število zloženih košar: 3. Dimenzije stroja X/Y/Z: cca 3200 mm/1900 mm/2650 mm, teža: cca 8000 kg, krmiljenje: Siemens 840DS, delovne ure: cca 35000 h, programske ure: cca 22000 h. Dokumentacija je na voljo. Ogled na lokaciji z električnim priklopom je mogoč. Gtedpfex Dm Dzjx Ad Aew

Stanje: rabljeno, Leto izdelave: 2014, Maks. premer struženja: 160 mm Gtedpfxjqvd Iqe Ad Ajw Maks. višina struženja: 150 mm Maks. premer obdelovanca: 100 mm Maks. višina obdelovanca: 150 mm Maks. število vrtljajev: 6.000 min⁻¹ Pomik - X: 700 mm Pomik - Z: 375 mm Os C: 360° Krmiljenje FANUC Vertikalni stružni stroj | EMAG - VL2 Opremljen s transporterjem za obdelovance. Stroj je v zelo dobrem stanju. Prosimo, upoštevajte, da so tehnični podatki dodani na osnovi primerljivih strojev.

Stanje: rabljeno, Leto izdelave: 2014, Največji premer vpenjalne glave: 250 / 315 mm Premer vrtenja: 350 mm Gtjdpoyan Rpofx Ad Ajw Največji premer obdelovanca: 250 mm Delovna pot: X-os: 745 mm Z-os: 300 mm Čas nalaganja: Čas nalaganja (odvisno od obdelovanca): 4 – 6 s Glavno vreteno: Vretenski prirobnik DIN 5502: 6 Prednje ležišče vretena maks.: 110 mm Največje število vrtljajev: 5500 min⁻¹ Diskovni revolver: Število nosilcev za orodja: 12 Premer stebla: 40 mm Pogonska orodja Maksimalna moč: 8,5 kW Število obratov: maks. 6000 min⁻¹ Čas zasuka revolverja: 0,3 s Krmiljenje: Bosch Rexroth MTX

Stanje: rabljeno, Leto izdelave: 2015, Technical details: Godpfx Adsq Sc Hus Aetw Turning diameter: 200 mm Swing diameter: 260 mm Turning height: 60 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, Technical Data Brand: KENT Model: VK 1600MC Year: 2006 Serial No.: 2200139 CNC: FANUC 18 iMD Location: Tabaza (Asturias) Table Dimensions Table Surface: 1700 x 810 mm T-slots: 22 x 5 x 160 mm Maximum Table Load: 2,000 kg Travel Longitudinal Travel X: 1600 mm Transversal Travel Y: 815 mm Vertical Travel Z: 815 mm Spindle nose to table distance: 220 ~ 1035 mm Spindle nose to column distance: 865 mm Spindle Taper: BT50 Spindle speed: 30 – 6,000 rpm ZF gearbox (2 ranges): Yes Max. Tool Weight: 15 kg Max. Tool Size (Diameter x Length): 125 x 300 mm ATC Max. Tool Size: Ø125 x L250 mm Max. Tool Weight: 15 kg Number of Tools: 32 Feed Rates Working Feed Rate: 1 – 10,000 mm/min Gsdjqwyzfspfx Ad Aotw Rapid Traverse (X / Y / Z): 18/18/18 m/min Motor Spindle Motor (Max. Power 30 min): 15/18.5 kW Axis Drives X, Y, Z: 5.5 / 5.5 / 5.5 kW Coolant Pump CTS: One air & two coolants – 4 bar + 6 bar / 20 bar Weight and Dimensions Machine Weight: 16,150 kg Machine Dimensions: 4,488 x 3,448 x 3,250 mm Footprint: 5,000 x 3,500 mm

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Gtodpfjia Rtdex Ad Aew Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, A vertical turning and grinding center EMAG VSC 250 DS is being offered. The machine undergoes a complete mechanical overhaul and rebuild by EMAG. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-belt, L-belt, parts turner) and additional peripherals such as chip conveyors, coolant systems, etc. Gtsdeh Tkdqjpfx Ad Ajw CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm Travel X-axis: 860 mm Travel Z-axis: 200 mm MAIN SPINDLE Power: 28 kW TOOL TURRET EMAG disc-type turret, 12x VDI 40 Bracket with grinding spindle 18 kW, 45,000 rpm Delivery time and additional equipment upon request

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.900 mm, skupna širina: 2.900 mm, skupna dolžina: 8.000 mm, proizvajalec krmilnikov: Heidenhain, lastna masa: 13.000 kg, Type: TMML6-centrum Maximale afstand van kolom tot spilcentrum: 1210 mm (kiel-diepte) Gereedschapswisselaar met 30 posities Spaantransportband Kan achteraf worden uitgerust met nieuwe Heidenhain-besturing Originele tafel kan opnieuw worden gebruikt of vervangen door een T-groef vloerplaat voor het bewerken van hogere werkstukken Langsverplaatsing X-as: 3023 mm Gsdpfev St Efjx Ad Aetw Dwarsverplaatsing Y-as: 800 mm Vertikale slag Z-as (hoogte): 1528 mm Klemoppervlakte tafel: 4200 x 1000 mm Maximale werkstukhoogte: 2000 mm Spilvermogen: 20 kW Opname in freeshoofdspil (ISO): ISO 50 Toerentalbereik: 50 - 1980 omw/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 72.284 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 685 mm, dolžina podajanja os Z: 200 mm, potovalna razdalja osi X: 685 mm, pomik po osi Z: 200 mm, zunanji premer vpenjalne glave: 250 mm, hitro pomikanje X-os: 45 m/min, hitri pomik na osi Z: 30 m/min, skupna dolžina: 3.100 mm, skupna višina: 2.650 mm, skupna širina: 4.000 mm, največja hitrost vrtenja: 6.000 obr/min, vrtilni moment: 460 Nm, skupna masa: 7.800 kg, model krmilnika: Siemens 840D, vrsta upravljanja: CNC krmiljenje, Oprema: hladilna enota, For sale is an EMAG VSC250, year of manufacture 2008. Equipped with a Siemens 840 D control system. Features: - Infeed and outfeed conveyor (O-conveyor) - Pneumatically controlled transfer device - Punching unit - Chip conveyor (discharge to the left) - Coolant system - Tool turret with 12x VDI40 holders Gedpsw Dyqdsfx Ad Astw The machine is currently under power and available for inspection.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.500 mm, skupna dolžina: 4.500 mm, skupna višina: 3.200 mm, Offered is a double-spindle pick-up lathe EMAG VSC 250 DUO. There are 2 almost identical machines of this type available. Each machine is equipped with 2 independent work spindles and 2 EMAG turrets. The machine is capable of either machining 2 identical workpieces with the same operation simultaneously, or producing one workpiece in two consecutive machining steps. The VSC 250 DUO will be completely overhauled before delivery and will receive a control system upgrade to Siemens Sinumerik ONE. If required, the machine can be equipped with further peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL Siemens Sinumerik One Godpfx Ajr Nc Ufjd Astw TECHNICAL DATA Workpiece diameter: max. 250 mm Workpiece height: max. 150 mm Chuck diameter: 250/315 mm Swing diameter: 350 mm X-axis travel: 745 mm Z-axis travel: 300 mm TOOL CARRIERS Work area 1: 1x EMAG disc turret, 12x VDI 50 stations, no driven tools Work area 2: 1x EMAG disc turret, 12x VDI 50 stations, with driven tools Price, delivery time, and machine configuration upon request.

Stanje: rabljeno, Leto izdelave: 2007, Double-spindle machining center in 5-axis configuration (on both sides) Travel paths X/Y/Z = 600/600(975)/500 mm Number of spindles: 2 Spindle distance: 600 mm Rapid traverse: 45 m/min Spindle speed up to: 17,500 rpm Drive power: 38 kW Tool magazine: 2 x 72 tool pockets Tool holder: HSK 63 CNC control: Siemens 840D Gjdpfstgu Ixjx Ad Aetw 1 x tool breakage control 2 x clamping bridge supports H75 mm 2 x clamping bridges for 5th axis Coolant system Knoll, 70 bar 1 x chip conveyor KB1000 1 x drilling head indexing unit 2 x tool length measuring system 2 x upgrade kit for torsion compensation A-/U-axis

Stanje: rabljeno, Leto izdelave: 2004, Turning diameter 250 mm Turning length 100 mm Control SIEMENS 840 D Godpfxot Hxa Te Ad Aotw Total power requirement 35 kW Machine weight approx. 7500 kg Required space approx. m E M A G Vertical CNC hard turning and grinding machine with tool turret and automatic workpiece feeder Type VSC 250 DS Year of construction 2004 # M7 28.69324 Max. turning diameter 250 mm Turning length inside/outside approx. 100 mm Workpiece length min./max. 29 – 100 mm 6-position tool turret diameter or swing circle 480/790 mm Slide travels X / Z (workpiece slide!) / stroke 680 / 400 / 200 mm Feed / rapid traverse X/Z 45 / 30 m / min. Feed force X/Z 5.5 / 11 kN Spindle speeds 4,300 / 6,000 rpm Spindle drive approx. 28 kW Total drive approx. 35 kW - 380 V – 50 Hz Weight 7,500 kg Accessories / Special equipment • CNC path control SIEMENS 840 D with color screen, graphics, menu-guided dialog programming, all common options, cycles and subprograms, etc. • 6-station tool turret with 6 tool holders (diam. 40 mm) without motorized drive, but as a swivel axis (B-axis), double bearing and with direction logic • 2 GMN grinding spindles on turret positions T 3 and T 6, speeds approx. 42,000 rpm and 18,000 rpm, fitted once with CBN wheel and once with ceramic pin • Workpiece feed unit with circulation system via drag frame for workpieces approx. 130 mm • MARPOSS MIDA – tactile measuring device for dimensional and final measurement during workpiece changeover • NORGREN air gap measuring device (?), hydraulic weight compensation for main spindle • SMW-Autobloc 3-jaw diaphragm chuck (for easier gripping of raw parts) approx. Ø 250 mm, with clamping force monitoring • HYFRA recooling unit for main spindle cooling and thermal stabilization of the machine frame, sophisticated SEITZ paper band filter system and extendable chip conveyor, coolant radiator for grinding emulsion, oil mist extraction, magnetic separator, central lubrication, etc. Vertical CNC turning machines offer a thermally stable design (chips do not fall into the machine bed) and fast workpiece changeover times (pick-up system via main spindle) and a stable tool arrangement that also enables non-turning operations. Here, hardened gears were hard-turned and ground. Condition: good - ready for demonstration shortly Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice