Navpična stružnica za struženje

EMAG VL6

Stanje: rabljeno, Leto izdelave: 2015, Swing diameter 420 mm Chuck diameter 400 mm X-axis travel 900 mm Z-axis travel 495 mm Spindle speed 3,100 rpm Number of tool stations 12 positions According to our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Bjdpfx Afjwqr S Teqslr Modifications and errors in technical data and information as well as prior sale reserved!

Stanje: rabljeno, Leto izdelave: 2001, Space requirement approx. 1450 x 1560 x 2620 mm Machine weight approx. 1.8 t The machine base is a heavy-duty welded construction. The coolant tank is integrated into the machine bed. The cross table is made of cast iron; the guideways are ground and scraped with adjustable gibs. The ram head is also made of cast iron, the guides are ground and scraped, and equipped with lubrication grooves. The ram head can be swiveled +/- 20 degrees. Blodpfx Afowbi Aweqor Stroke is adjustable via a side opening. The tool is positioned against the longitudinal stop. The machine is equipped with a mechanical stroke drive. The CNC rotary table controller is housed in the operator panel. The zero point can be set in any desired position of the indexing head with division options from 2-999 symmetric and 99 asymmetric divisions. Machine color: Green Indexing head color: Red --> Technical Data Adjustable stroke from 0 up to: 250 mm (No. 1) Distance column/tool holder: 425 mm (No. 2) Distance table surface/head: 430 mm (No. 3) Vertical ram adjustment: 430 mm (No. 5) Rotary table diameter (NC on axis A): 450 mm (No. 6) Longitudinal table travel (NC on axis Y): 250 mm (No. 8) Cross table travel (NC on axis X): 220 mm (No. 9) Bore at the table center: 135 mm (No. 10) Infinitely variable ram strokes per minute: 22-90 strokes/min Ram motor power (automatic brake, asynchronous): 3 kW Dimensions (ram fully raised; LxWxH): 1450x1560x2620 mm --> Digital operating manual available in German and English

Stanje: novo, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic band saw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile materials, with a maximum remnant piece length of 60 mm. - The cross-section max. is 230x230 mm. - Numerically controlled band saw with the new Windows “CE” based system, specifically developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys Bjdefg E Hyopfx Afqelr for the machine's operating functions, ensuring reliable operation, simple and intuitive use, and real-time monitoring of all cutting parameters. - Safety enclosure in accordance with the latest EN 13898/2007 machinery directive requirements. - New fieldbus communication system with dual microprocessor and serial connection. - Robust cast iron (G25) construction to compensate for vibrations, improve machine stability, and prolong band saw blade life.

Leto izdelave: 2024, Stanje: novo, The world’s flattest timber frame assembly table = only 3 cm! Supplied without wooden panels. Supplied components: - 1 double guide rail (zero stop) - 10 perforated rails - 10 rack clamps - 14 adjustable stop blocks - 14 exchangeable exterior wall pressure plates - Cordless impact wrench - Bit adapter - 50 dowels MMS 10x70/5 - Hammer drill bit 8x165 Dimensions: Clamping length from 0 to 3,550 mm Hole grid 140 mm With a panel width of 1,250 mm = Table length 12,350 mm Max. clamping force approx. 250 kg Clamp stroke length 340 mm Stop block height 100/160 mm This frame assembly aid was developed to enable precise production of timber frame elements. Particular attention was paid to space requirements and price. Due to its extremely flat design, the surface can be used for other purposes by removing the clamps and stops. This is a considerable advantage not only for small operations, but for businesses of any size. After creating a level surface, the clamping rails are aligned and anchored to the floor. The gaps are filled with a 30 mm thick wooden panel supplied by the customer. The same panel can be used to install approach ramps at the edges. The level thus created can be driven on by heavy vehicles or used as storage space. This means that the area can be activated for timber frame assembly only when needed. All steel parts are galvanised. Complete installation is carried out on site by the customer. After adjusting the table, the stops must be pinned, as they could otherwise be moved by the force of the clamps. Blodpfx Afob Nrbnoqor Packaged in wooden crates, ready for EU shipping. Delivered free to addresses within Germany. Made in Germany. For technical data, see specification sheet.

Stanje: dober (rabljeno), Leto izdelave: 2015, Control: Heidenhain / Siemens 840 D SL Working area: 700 mm x 420 mm x 380 mm (X/Y/Z) Table size: 840 x 420 mm BBT 30 Max. spindle speed: 10,000 rpm Direct position measuring system X, Y, Z External air blast Handwheel Nano package (increases temperature stability) Renishaw OMP 40-2 touch probe Automation interface incl. automation door on the left and hydraulic interface preparation Chip conveyor (increased discharge height 1050 mm) ICS (internal coolant supply) 40 bar Blsdpovzahxjfx Afqjr Coolant auxiliary tank 400 l Coolant/air blast switching Additional nozzles on spindle head and in tool magazine Work area flushing via additional nozzles Rinsing gun Oil and emulsion mist separator PROGRESSline Tropical package (active cooling unit for control cabinet, spindle, and spindle motor) 2-circuit clamping hydraulics with operator panel Control cabinet lighting PLC project file Individual loader detection E1 interlock BDE interface (production data acquisition) Electronic key system Max. table load: 300 kg Tool changer: Number of tool stations: 15 positions Max. tool diameter: 80 mm Max. tool length: 250 mm Max. tool weight: 3 kg Chip-to-chip time: 1.5 sec Feeds: Feed speed: 1 – 60,000 mm/min Rapid traverse: 60 / 60 / 60 m/min Max. feed force: 5,000 N Total power requirement: 25 kVA Machine weight approx.: 4.1 t Space requirement approx.: 3.0 x 3.0 x 2.8 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 15.600 h, Funkcionalnost: popolnoma funkcionalen, Spindelhastighet: 50–6000 varv/min Rörelse XA–XB: 205 mm ZA–ZB: 700 mm W: 730 mm YA–YB: 95 mm Revolvrar: 2x 16 positioner Multitasking V16 Spindelhastighet driven verktyg: 45–6000 varv/min Motorer driven verktyg: 5,5/3,7 kW Spindelmotorer: 22/15 kW Tillverkningsår: 2010.12 Blodewfr R Ejpfx Afqsr Längd: 3300 mm Bredd: 2500 mm Höjd: 2500 mm Vikt: 9000 kg Robotinterface

Stanje: rabljeno, Leto izdelave: 2008, Premer delilnega kroga 650/800 mm Dolžina obdelovanca - maks. 1100 mm Modul - maks. 20 (25) mm Modul - min. 0,5 mm Krmiljenje Siemens Sinumerik 840 D Bljdpsw Rrbyjfx Afqor Skupna priključna moč 62 kVA Nagibni kot -45 / +120 ° Teža stroja pribl. 10 t Oprema/pribor: - Sistem za hlajenje - Transporter za ostružke - Tehnična dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, MITUTOYO Contracer CV-2100M4 Contour Measuring Machine Measuring range horizontal X = 100 mm Measuring range vertical Z = 50 mm Bljdpfxovun Tpe Afqsr Column travel Z2 = 350 mm Inclination +/- 45° Dimensions (W x D x H): 745 mm x 450 mm x 885 mm Total weight approx. 150 kg Including PC system Including cross table 218-001 Including rotating vise 2028-003

Stanje: rabljeno, Leto izdelave: 1999, Maximum wheel diameter: 280 mm Wheel width: 330 mm Module - max.: 5 Module - min.: 1 Control unit: LIEBHERR CNC Total power requirement: 28 kW Machine weight: approx. 12 t Space requirement: LIEBHERR CNC-controlled gear grinding and profile grinding machine Model: LCS 282 Year of manufacture: 1999 # 1099 ----- Max. workpiece diameter: 280 mm Module: 1 - 5 Helix angle: +/- 35° Distance from table center to tool center: 15 – 285 mm Vertical grinding slide stroke: 330 mm Shifting/traversing stroke: 200 mm Minimum number of teeth: 7 Grinding spindle position above table (min./max.): 70 - 360 mm Clamping length of workpiece: 420 up to max. 620 mm Worm grinding wheel / profile grinding wheel diameter: 145 x 210 / 175 mm Speed of worm wheel/profile tool: 2,500 – 10,000 rpm Maximum table speed: 750 rpm Spindle drive: 28 kW Bedpfst Hwu Aox Afqelr Total drive capacity: approx. 50 kW – 400 V – 50 Hz Total weight: approx. 12,000 kg Accessories / Special Features • LIEBHERR CNC control system Type LH 90 GG, a user-friendly CNC control (B+R / IPC 5000) with gear-specific operator interface and diagnostic functions for quick troubleshooting. (Remote diagnostics possible) • Equipped with automatic threading device for positioning the grinding wheel in the tooth gap • The machine operates with three grinding processes: a. Generating grinding using CBN worm wheels = fastest processing b. Profile grinding using CBN profile grinding wheels (one or two wheels) = highest accuracy! c. Combination of a and b (most economical solution): pre-grinding with worm wheel / finish-grinding with profile grinding wheel by single part method • Automatic shifting of worm grinding wheel and automatic positioning of profile wheel • Automatic workpiece loading via a ring loader mounted on the counter column, which automatically loads and unloads raw and finished parts. Workpieces are transported to the ring loader via a separate FLEX LINK conveyor, picked up, and removed again. Thus, unmanned operation is possible. • Hydraulic workpiece clamping on the table, but without clamping device. Tailstock slide present on counter column, but without tailstock. Slide stroke up to approx. 350 mm • Completely enclosed work area with sliding door and separate CO2 fire extinguishing system/IR sensor • No original coolant system (due to central supply), and no dresser provided. Condition: good to very good – under power and ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice We appreciate your interest – over 200 gear machines constantly in stock.

Stanje: delavnici obnovljeno (rabljeno), Modernized machines with new LTG control system StoreControl L External dimensions: Construction height: 6,000 mm Construction width: 1,630 mm Construction depth: 2,980 mm 30 carriers, each with 500 kg load capacity in usable clear internal dimensions: Width: 1,300 mm Depth: 863 mm Height: from 50 to 750 mm Total load capacity up to 40,000 kg Start of the operator opening at 870 mm above finished floor level, then 845 mm high Colour scheme: GREY / BLUE, carriers hot-dip galvanized (Sendzimir process) Surface cleaned, signs of use possible Performance data: Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.29 kW / 400 Volt Additional features: Manually operated lift door Bodpfjn D A Rrsx Afqjlr Subject to errors, technical modifications, detail deviations from photos Delivery & installation currently primarily in Germany, Austria, and other neighboring countries