Brezsredinski - cilindrični brusilni stroj

JUNKER Jupiter 500

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 140 mm Turning length 615 mm Control C200-4D Spindle bore 65 mm Spindle speed 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides 1, 2 and 3 X-axis travel 110 mm Z-axis travel 360 mm Iiodpjwzynqofx Aa Usa Y-axis travel 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction 150 mm Slide travel Z-direction 600 mm Spindle speed 5,000 rpm B-axis, B-correction axis +/- 1° Tool turret – number of stations: 3 x 12 Tool holder DIN 69880 VDI 25 x 48 C-axis 0.001° Total connected load 61 kW Machine weight approx. 6.5 t Space requirement approx. 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 for bars with length from 500–3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading system BREUNING ILS-REX-7208, year 2007

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), A Spinner simultaneous turning center featuring three turrets, complete with extensive accessories, spare parts, and tooling, is available. Travel paths X1/X2/X3: 180mm, Y1/Y2: +/-45mm, Z1/Z3: 704mm, Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Includes Top Automazioni bar feeder, coolant/high-pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tooling package, and additional spare parts. Documentation is available. On-site inspection possible. Iiedjua E Tropfx Aa Uoa

Leto izdelave: 2008, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The system was used for grinding oil filtration in carbide machining applications. Cooling unit: Eckert 3 filter towers with sludge bag Filtration capacity: 80-100 l/min Filtration fineness: 3-5 µm The description refers to the system with a sludge drum; technical data are similar. Original user manual available in hard copy. Videos available upon request. Isdpfx Aslczcwsa Uoia

Leto izdelave: 2012, stanje: dober (rabljeno), Muratec MW120 GT naprodaj Rabljeno, v odličnem stanju. Ogled stroja je možen po dogovoru. Isdpeifi D Tofx Aa Usia Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár

Stanje: rabljeno, Used 3D printer EOSINT M 270, low operating hours (4,910) Isdowd Ulvspfx Aa Ueia

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 27.608 h, proizvajalec krmilnikov: SIEMENS, Ta 5-osni DMG MORI CTX beta 800 TC je bila izdelana leta 2014. Opremljena je z glavno vreteno s 5.000 obr/min in protivreteno s 6.000 obr/min ter z 30-pozicijskim magazinom za orodja. To stružno-rezkalno središče DMG MORI CTX beta 800 TC je idealno za zahtevnejše stružno-rezkalne postopke. Za več informacij o stroju nas kontaktirajte. • Orodja: 30 kosov • Vključena orodja, prikazana na fotografijah • Brez podajalca palic Iodpfx Ajx U D Hqsa Ujia

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.400 mm, skupna dolžina: 1.250 mm, skupna višina: 1.150 mm, pritisk: 2.000 letvica, obratovalni tlak: 2.000 letvica, vrsta vhodnega toka: Klimatska naprava, skupna masa: 3.300 kg, največja hitrost vrtenja: 1.500 obr/min, moč: 132 kW (179,47 KM), leto zadnje generalne obnove: 2023, tlak vode: 2.000 letvica, zmogljivost črpalke: 34 l/min, Oprema: Na voljo je tipska ploščica, Stacionarna visokotlačna črpalna enota Woma EG 250M-P20 na osnovnem okvirju. Podobna, vendar ni Hammelmann, Kamat ali Uraca. Tip črpalke: 250M P20 Delovni tlak: 2000 bar Pretok: 34 l/min Pogonske vrtljaje: 1500 obr./min Pogonska moč: 132 kW z EMK elektromotorjem, z regulacijskim ventilom tlaka, z varnostnim ventilom. Dimenzije DxŠxV: pribl. 1.250x2.400x1.150 mm Teža: pribl. 3.300 kg Iedpjxmki Tofx Aa Ueia Letnik: 2013 Stanje: V zelo dobrem rabljenem stanju. Črpalka je bila redno servisirana, nazadnje v začetku decembra 2023. Dokazila so na voljo.

Stanje: rabljeno, Grinding diameter: 350 mm Iisdpfx Aouxft Eja Uoa Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color monitor, keyboard CNC Turbo Roughness for WINDOWS TECHNICAL DATA Ijdpfx Aaslxyp Ho Ujia Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy grade: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear Feed Unit Waveline 60 Basic Measuring range: 60 mm Resolution: 0.014 µm Measuring Column Wavelift 400 CNC Travel: 400 mm Positioning repeatability: < 10 µm Machine Dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT/ACCESSORIES  Full enclosure with electrically operated roller shutters  Hard stone plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece holding plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manual to the Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurement  Machine table  Emergency stop button on the machine table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the hard stone plate  Documentation

Stanje: dober (rabljeno), Leto izdelave: 2012, Deli, prikazani ročno, niso vključeni. X1020mm Y610mm Z610mm 12.000 obr/min, 25 kW, 160 Nm Krmilna enota: HEIDENHAIN iTNC 530, 4. os bo priložena brez delov, prikazanih ročno. Ijdpex Awzbefx Aa Uoia