CNC stružnica Gurutzpe - AUTO M-S CNC

Gurutzpe AUTO M-S CNC

Stanje: novo, The CT 25 (Ø 0.2 to 2.5 mm) is a new addition to the range, replacing and/or complementing the 25TS, which operates with a cam system. This machine features between 11 and 16 axes, detailed as follows: - 8 independent slides - wire feed - nozzle rotation - servo spinner OR lateral movement of the coiling finger Optional (up to a maximum of 5 additional axes): - servo cutter - additional servo spinners - lateral movement of the coiling finger Rjdpfovbd Ezex Agtst - transfer for lifting the second eyelet (German type) for tension springs. Maximum feed speed: 121 m/min. Slide stroke: 50 mm Machine dimensions: 1.30 x 1.46 x 1.68 m Machine weight: 900 kg Please feel free to contact us for any further questions.

Stanje: zelo dobro (rabljeno), Silo en aluminium sur anneau de support (ancien silo à lait en poudre) – d'occasion – conçu pour une densité apparente de 0,65 kg/dm³ Volume : 94 000 litres Fabricant : P+W Metallbau Quantité : 1 Diamètre : env. 3 000 mm Hauteur cylindrique : env. 17 000 mm Matériau : AlMg3 Densité apparente : 0,65 kg/dm³ Pente du toit de la calotte supérieure : 15° Équipement et raccordements : Sur la calotte supérieure : 1 x trou d'homme DN 600 avec couvercle Rsdpji E Hnyefx Agtet 1 x prise d'aération DN 300 avec capot 4 x brides DN 100 2 x brides DN 150 Sur la virole : 1 x porte d'accès, env. 850 x 2000 mm avec fentes de ventilation 1 x bride DN 50 pour sonde de mesure 6 x supports de tuyauterie pour tube de remplissage (sans tube de remplissage) 6 x supports pour échelle d'accès (sans échelle d'accès) Divers passages de tuyaux au niveau de la virole inférieure Le silo possède un cône inférieur à 60° avec fond vibrant (DN 1500). Les équipements de mesure et de régulation actuellement installés sont inclus dans le prix, sans garantie de fonctionnement ! Sinon selon photos et schéma.

Stanje: rabljeno, Stroj za valjanje navojev ORT RP30U 2-valjna 30 ton Redjt H Ty Ujpfx Agtjt Zasukljive glave Inverter #1331 Stroj si lahko ogledate v delovanju v našem skladišču v Gussago BS. Možnost demonstracije M i m u Stroji za valjanje navojev so mehanski postopki brez odrezavanja, ki se lahko izvajajo hladno ali vroče, z namenom izboljšanja površinske kakovosti (torej tudi izboljšanja utrujenostnih lastnosti). Moč (tona): 30 Število valjev: 2

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Rodpfx Ajdkdi Tegtst Pressure: 1.6 MPa

Stanje: dober (rabljeno), Leto izdelave: 2002, Wheel diameter - max. 275 mm Rodpfstumrpsx Agtet Wheel width 55 mm Module - max. 6 Module - min. 1 Control unit 840 C Siemens Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.2 x 2.3 x 2.4 m

Stanje: novo, Leto izdelave: 2022, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 15 m/min, skupna masa: 7.400 kg, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10 obr/min, pomik osi Y: 1.500 mm, moč: 22 kW (29,91 KM), DYAS ploščinsko vrtalno središče - DYAS PDC-1500 Število vrtalnih enot: 1 vertikalna Moč motorja: 22 kW Vreteni navor: 280 Nm Hitrost vretena: 10–4000 vrt/min Avtomatska menjava orodja (ATC): 16 pozicij Rsdpfx Agjgbfaxstet Največja teža obdelovanca: 760 kg Največja vrtalna zmogljivost (mm): Ø40 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, moč vretenovega motorja: 13.000 W, največja hitrost vretena: 6.300 obr/min, število osi: 2, This EMCO E45 turning and milling center was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range of up to 6300 rpm. The VDI30 tool turret with 12 stations supports 6 driven tools, enhancing versatility. Equipped with the SINUMERIK 828D OPERATE control system for precise machining and a robust build, it includes a chip conveyor and high-pressure coolant system. Contact us for further details on this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0-6300 rpm • C-axis on the main spindle • Tool turret: 12-position VDI30, axial • Direction logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tool speed: 0-5000 rpm Tailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tube Control & Software • SINUMERIK 828D OPERATE • SHOPTURN conversational programming • USB interface • Network / Ethernet • 10.4" TFT color display • 3D simulation Media & Machine Features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • Documentation Tool measurement (E45) • Measuring arm mounted in the working area • Tool measuring on the turret • Short setup times / precise measurement / cost-efficient Workpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jaws Other (machine-related) • Water gun Rjdpsyffgrofx Agtst • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional Equipment Bar loader / Magazine (SL1200 - as referenced) • Bar length: 850-1200 mm • Bar diameter: Ø 8-95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support surface: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operator side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090-1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • Documentation Spindle extension (for bar loader use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reduction sleeves (3 pieces) • Required for use with SL1200 Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mm High-pressure coolant system • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant supply • Interface & software Robot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual mode switching Additional Components • PC keyboard USB (QWERTY) • Machine status LED: Green (automatic), Red (alarm), White (material handling) Installation and Mounting Material • 4× vibration dampers • 4× mounting brackets • 4× heavy-duty anchors Part catcher • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Multifunkcijski varilni stroj (MIG, TIG, elektrode) Znamka: Kemppi Model: Pro 3000 / Promig 500 Stroj s hlajenjem z vodo in hladilnikom Kemppi PRO Cool 10. Enota za TIG/elektro varjenje Kemppi PRO TIG 410 - Panel Kemppi TL - Funkcije za TIG varjenje: predplin, poplin, oblok, visoka frekvenca TIG generator Kemppi Pro 3000 Enota za MIG/žično varjenje Kemppi PRO MIG 500 - Delovni cikel: 500A – 60% - Kontrolna plošča Kemppi ML SYNERGIC - 4 pogonski valji Rjdoxf Hv Hopfx Agtjt - Impulzni obločni tok s Synergic panelom - Posebne funkcije za varjenje jekla, nerjavnega jekla in aluminija Vključuje: - TIG varilna pištola - MIG varilna pištola - Masa - Regulator za plin

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 1.300 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 36 obr/min, dolžina mize: 4.000 mm, širina mize: 1.500 mm, kapaciteta rezervoarja: 500 l, SHW PowerSpeed 5 Axis Travels • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (horizontal spindle head): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Rates • X, Y, and Z axes: 2 – 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head rotation range (mount): 360 x 1 degree • Milling head rotation range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Temporarily 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Clamping Table • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 liters Splash and Chip Guard • On one side, with 2 sliding doors, manually movable About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system retrofits. Rsdpow I Rz Hefx Agtst Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control system modernization ----- Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used drill milling machine - used metal milling machine - used metal mill - used metalworking milling machine - used cnc mill - cnc milling machines - milling machine - large workpiece machining - cnc large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Heidenhain digital display Fehlmann cross table KS 322 D Working area: Quill stroke Z-axis: 110 mm Travel of machine head: 450 mm Table to spindle nose: 0–527 mm Quick-change system: SF 32 Spindle motor: 2.9 kW Infinitely variable speed range: 50–6300 rpm Clamping surface: 320 x 670 mm Dimensions and weight: Space requirement (W x D x H): 1.5 m x 1.35 m x 2.1 m Rsdpfx Agowkrp Eotst Weight: approx. 850 kg