Vpenjalna plošča, vpenjalna miza, obdelana jeklena strojna miza, težka ravnalna plošča ali varilna p

EIGENBAU 2150 x 1040

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Hnedpfxsrmkfnj Abxsn Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: novo, Leto izdelave: 2022, SPECIAL PRICE, Stock machine year of manufacture 2022, Condition: new List price: €14,110 STOCK MACHINE – Semi-automatic metal band saw with high cutting precision! With this machine, miter cuts are infinitely adjustable from 45° left to 30° right (Swivel range: 45° left and 60° right). Technical specifications ● Cutting capacity - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0.9–1.5 kW / 400 V / 50 Hz ● Band speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0.9 mm Standard features: ● Hydraulic control of saw frame ● Automatic saw frame height limitation via contact sensor ● Easy and convenient material clamping via a hydraulic short-stroke cylinder ● Hydraulic cutting pressure regulation Hedpfx Asmf T Hpjbxsnn ● Simple, stepless miter adjustment of the saw ● Electric blade tension monitoring with saw blade breakage control

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 430 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 3.550 obr/min, hitrost vretena (min.): 17 obr/min, For sale: Hermle CNC / conventional milling machine, model UWF 802 M The machine is in good to very good condition and ready for immediate use. Hnedpfx Aorvitlebxen Technical Data: Year of manufacture: 1994 Control system: Heidenhain TNC 124 Clamping surface: Rigid angle table Spindle speed: 17 to 3550 rpm Feed: Infinitely variable Drive power: 6 kW Travel X: 500 mm Travel Y: 430 mm Travel Z: 400 mm Tool holder: SK40 Dimensions (L*W*H): 1800*1800*1900 mm Weight: 1.8 t Loading and transport can be organized within Europe upon request and at an additional charge. Prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Do you need a high-quality yet cost-effective metalworking machine for your production? Or are you looking to sell your equipment? For further information or contact options, please visit our website.

Leto izdelave: 2022, stanje: novo, CECCATO 11kW SCREW COMPRESSOR 2022 NEW Hedpsiphyaofx Abxonn Brand new screw compressor!!! CECCATO CSA15/10 G2 (equipped with an ATLAS COPCO screw element). Technical specifications: Capacity: 1.40 m³/min Motor power: 11 kW Pressure: 10 bar Year of manufacture: 2022 Hours: 0!!! The compressor is brand new and fully operational! Service support provided.

Stanje: novo, Fastech Horizontal Bandsaw Semi-Automatic BMSY 320 DGH Saw Band Dimensions: 4160x34x1.1 mm Band Speed: 20 - 100 m/min, steplessly adjustable Cutting Capacity 0° (rectangular): 450x320 mm, (round): 320 mm Cutting Capacity 30°: (round): 320 mm, (square): 320 mm, (rectangular): 410x320 mm Cutting Capacity 45°: (round): 320 mm, (square): 320 mm, (rectangular): 330x320 mm Cutting Capacity -30°: (round): 320 mm, (square): 320 mm, (rectangular): 420x320 mm Cutting Capacity -45°: (round): 320 mm, (square): 320 mm, (rectangular): 340x320 mm Cutting Capacity -60°: (round): 240 mm, (square): 220 mm, (rectangular): 230x220 mm Working Height: 860 mm Coolant Pump Motor: 0.12 kW Hydraulic Motor: 0.37 kW Main Motor: 2.2 kW Length: 2260 mm Width: 1160 mm Height: 1700 mm Weight: 1030 kg Hedpfxsg Ekp Ne Abxenn Double Mitre Saw Stepless Band Speed Adjustment Hydraulic Vice High-Performance Gearbox Hydromechanical Saw Band Tension Saw Band Brush Digital Mitre Angle Display

Stanje: novo, Leto izdelave: 2026, zmogljivost vrtanja: 40 mm, globina grla: 1.220 mm, hitrost vretena (min.): 110 obr/min, največja hitrost vretena: 2.900 obr/min, skupna masa: 1.710 kg, pomik vretena: 200 mm, nosilec vretena: MK 4, Drilling capacity in St 60: 40 mm Drilling capacity in GG 20: 40 mm Hjdpfx Abjtzkmboxenn Thread cutting (St 60 / GG 20): M 27 / M 36 Toolholder short spindle: MK 4 Swing (distance spindle center / column) min. - max.: approx. 210 - 1220 mm Clamping surface machine table: approx. 1200 x 510 mm T-slots in machine table: number x width 3 x 18 mm Distance drill spindle – table min. - max.: approx. 375 - 675 mm Distance drill spindle – base plate (= option) min. - max.: approx. 1075 – 1375 mm Spindle stroke: approx. 200 mm Feeds approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / rev Main spindle speed range: infinitely variable 110 - 2900 rpm. Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Drive power spindle motor 400 V, 50 Hz: approx. 2.2 / 4.0 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4397, Dear Sir or Madam, For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with an original Weiler 3-axis digital readout. This newer "AC" version stands out due to its infinitely variable speed control, which further enhances operation on this already very user-friendly machine. The machine has undergone extensive partial refurbishment in our workshop, bringing it to excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers switch smoothly. You are welcome to inspect the machine and verify its condition in person at our premises. Availability: on request Machine No.: 4397 Year of manufacture: 1998 Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20-3000 rpm, stepless Tailstock taper: MT3 Quill stroke: 85 mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Thread types possible: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400 V Dimensions (LxHxW): approx. 1.58x0.9x1.5 m Weight: approx. 720 kg Additional equipment & accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and further accessories upon request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint your chosen machine in your preferred colour - On request, you can order additional accessories such as tools directly - On request, we can also install additional accessories such as safety devices etc. Hjdpfxeq H D U Eo Abxenn - We are happy to arrange shipping and/or on-site installation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-Compliant! Technical Specifications: - Year of manufacture: 2008, Machine No. 348084 - Rigid universal angle table - Infinitely variable spindle speed up to 4,500 rpm - Infinitely variable feed on 3 axes from 0 to 2,000 mm/min - Rapid traverse X and Y axis: 5,000 mm/min, Z axis: 4,000 mm/min - Travel (X/Y/Z): 400/350/400 mm - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal spindle: SK40 taper - Hydraulic clamping system - Weight: approx. 1,800 kg - Space requirement: approx. 2.3 x 2 x 2 m - Drive power: 15 KVA Features and Accessories: - Heidenhain TNC 320 CNC control - Hydraulic clamping vertical and horizontal - Centralized automatic lubrication system - Spindle brake - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels Hnedpfx Abjv Dut Iexjn - Coolant system - Electronic handwheel HR410 About the Machine: Offered for sale is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition and comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. The machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward thanks to the swiveling vertical head. The guideways are regularly lubricated by the centralized lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. You are welcome to inspect and test the Kunzmann under power on site.

Stanje: rabljeno, Leto izdelave: 1995, - Heidenhain digital position display - Infinitely variable feed on all axes - Rapid traverse on all axes - Hydraulic tool clamping system - Rigid angular table - Electrical central lubrication system - Coolant system - Workplace lighting - Machine feet - Year of manufacture: 1995 Specifications Milling Table: - Clamping surface: 650 x 350 mm - T-slots: 5 - T-slot width: 14 H7 mm - T-slot spacing: 63 mm - Max. load: 250 kg Working Area: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Distances: - Table top to horizontal spindle centre: 140 – 540 mm - Table top to bottom edge of vertical head max.: 430 mm Milling Spindle: - Tool holder: SK40 - Speeds vertical/horizontal: 40 – 2550 rpm - Gear stages: 2 Hodpfx Ajvhfqrobxsnn - Quill stroke vertical: 60 mm - Vertical head swivel range (both sides): 90° Feeds: - Longitudinal & cross feed: 0 – 1000 mm/min - Longitudinal & cross rapid traverse: 4000 mm/min - Vertical feed: 0 – 1000 mm/min - Vertical rapid traverse: 3000 mm/min General Data: - Drive power: 3 kW / 1410 rpm - Dimensions (W x H x D): approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Stanje: rabljeno, Universal NC milling machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture 1998 Travel paths X: 400 mm, Y: 320 mm, Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed 40 - 2500 rpm Feed rates X, Y, and Z axes stepless from 0 - 1000 mm/min Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill adjustment vertical 60 mm Spindle motor power 3 kW Mains connection 400 Volt, 50 Hz - CNC path control Heidenhain TNC 124 - Spindle speed in 2 gear ranges and stepless via electronically controlled variator gearbox Hjdslvyrbopfx Abxjnn - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet attached to the machine - Coolant tank with pump positioned alongside - Central lubrication - Lighting Required space (L x W x H): 1800 x 1800 x 1900 mm Weight: 1300 kg Good condition