32x3 mm – Hidravlični cevni upogibnik z vpenjalnim vretenom

CRONOSSTECH MBB 32 H-PLC

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), A CNC turret punch machine by Amada for medium-format sheets, including an MP300 M loading unit, a Wilson X-Sharp grinding machine, and numerous standard and special punching tools is available. 1) CNC Turret Punch Machine Amada, year of manufacture: 2007, punching force: 300 kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128 m/min, repeatability: +/- 0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18,000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Tool grinding machine Wilson X-Sharp. Documentation available. On-site inspection is possible. Rsdpfx Abewhp N Dohon

Stanje: novo, Leto izdelave: 2019, Pressure: 275 t Distance between uprights: 3,000 mm Total power requirement: 30 kW Machine weight approx.: 40 t Retraction force: 27 t Maximum pump capacity: Axial pump with proportional valve Bridge travel distance: 6,000 mm Lateral travel range of the cylinder: max. 3,000 mm Table size: 6,000 x 3,000 mm Table height above floor approx.: 700 mm Maximum distance table to ram: 1,100 mm Oil tank: 450 l Bridge travel speed: on X and Y, 30-33 mm/sec Cylinder lowering speed: 2-10 mm/sec Cylinder stroke speed: 2-50 mm/sec Cylinder stroke: 900 mm Cylinder diameter: 440 mm Ram extension: 200 / 200 mm / Ø Cylinder moves via a servomotor using rack and pinion: 40 mm Rjdpfx Ajfxyigjbhsn Control system Siemens: S7 1200 Siemens Monitor 9": Touch Panel Control panel: portable

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Portal frame press with 400 T capacity Redpehyc Nwjfx Abhsn Oil-hydraulic double-column press a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000 x 3000 mm d) Clear opening height 1500 mm e) Overall dimensions approx. LxWxH 6000 x 5000 x 4500 mm f) Oil temperature indicator on tank g) Lubrication via grease nipples h) Table with grid design i) Operation via a control panel mounted on a pivot arm, attached to the bridge j) Pressure adjustment from 60 T to 400 T via monitor k) Bridge movement by two geared motors via rack and pinion l) Cylinder traverses left and right via rack and pinion m) Machine body powder-coated or double painted n) T-slots as per customer specifications o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operator sides: 3 sides Forces Maximum pressing force: 4000 kN Maximum free pulling force: 600 kN Pressurization time (clamped tool, steel on steel): max. 3 sec Dimensions Maximum opening: 1500 mm Stroke and min. opening: 1500 mm / 0 mm Table height above floor: approx. 900 mm Overall height above floor: approx. 4500 mm Minimum hall height: 5500 mm Deflection Measured at max. closing force with 70% load ≤ 0.8 mm/m Weight Total press weight without operating fluids and table plate: approx. 52 T Speeds Fast closing: 17 mm/sec Sound pressure Sound pressure level measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics Number of press cylinders: 1 pc. Operating pressure: max. 280 bar Pressurization time: 2–3 sec Pressure accuracy during pressing stroke: ±5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrics Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Hydraulic main motor connection (IE3): 30 kW Total connected load: approx. 35 kW

Stanje: novo, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, Premer cevi (maks.): 65 mm, Dolžina cevi (maks.): 3.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 190 °, radij upogibanja (maks.): 250 mm, število osi: 5, trajanje garancije: 12 meseci, Oprema: CE označba, dokumentacija / priročnik, nožno daljinsko upravljanje, nujno zaustavitev, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling dies and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of workpiece length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Emergency-stop mobile foot pedal • Remote assistance • Mandrel and non-mandrel bending • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic gripper clamp • Electric panel safety lock and key lockable panel • Electric system cooler • Overload protection • Detailed operation reports sent automatically OPTIONAL EQUIPMENT (Not Included in Price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Extra mandrel length (up to 6 m) - per meter • Ball mandrel and wiper die • Automatic mandrel lubrication system (for suitable pipe diameters) Rsdpfx Asxircgebhen • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum Capacity mm Ø65x3mm Maximum Bending Radius mm 250mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50-200 Working Length mm 3000 Rotation Tolerances Adjustable Bending Power kW 22.5 Dimensions (LxWxH) mm 6350x1400x1600 Weight kg 3950

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, Portal frame press with 300 T capacity a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500 x 1600 mm d) Clear opening height 700 mm e) Overall dimensions (LxWxH) approx. 4500 x 2300 x 3700 mm f) Oil temperature display on tank g) Lubrication via grease nipples h) Table in grid construction, with T-slots according to customer specification, otherwise 22 mm i) Controls mounted on a pivoting arm attached to the bridge j) Pressure adjustable from 50 T up to 300 T via MONITOR k) Bridge travel driven by two geared motors, rack and pinion drive Rsdpfx Absh Agnuohon l) Cylinder moves left and right via rack and pinion drive m) Machine body double-coated n) Cylinder induction-hardened Design Type: Gantry Press Thermally neutral 80–120 °C Number of operator sides: 3 Forces Maximum pressing force: 3,000 kN Maximum free tear-off force: 500 kN Pressure build-up time (closed die, steel on steel): Max. 3 sec Dimensions Maximum opening width: 700 mm Stroke and min. opening: 700 mm / 0 mm Table height above floor: approx. 980 mm Height above floor (overall height): approx. 3700 mm Minimum hall height: 5,000 mm Deflection Measured at maximum closing force with 70% occupancy: ≤ 0.8 mm/m Weight Total weight of press (without operating fluids and table plate): approx. 22 T Speeds Rapid closing: 17 mm/sec Pressing speed: 8 mm/sec Opening: 55 mm/sec Sound Pressure Sound level measured at 1.5 m height at control panel: max. 78 dB(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders: 1 Operating pressure: max. 350 bar Pressing pressure build-up time: 2-3 sec Pressure accuracy during pressing stroke: +/- 5 bar Main Pump BOSCH REXROTH, approx. 93 L/min Oil volume: HLPD 46 MW, 900 liters Ambient temperature: max. 45 °C Oil temperature: max. 55 °C Electrics Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Connection for hydraulic main motor: IE3, 22 kW Total connected load: approx. 30 kW

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Weight approx.: 365 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. Height adjustment is, as standard, performed via a manual hydraulic system within a range of 650 – 1050 mm (other ranges available upon request). The worktop, like the SST fix series, features a 100 x 100 mm Ø 28 mm hole grid. When used in combination with processing machines, inspection or rework fixtures (deburring, marking, inspection) can be adjusted in height to match the clamping table of the machine. Rjdpfofk Aivex Abhjn The table systems can easily be relocated on-site using a pallet truck. These mobile systems, with various options for fastening and securing, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and prepared for repairs in the maintenance area. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively if worn. Table 2 below provides an overview of the available standard models. Price must be confirmed with the manufacturer before ordering!!

Stanje: novo, Leto izdelave: 2024, TP Turret Punch Presses Durma TP series turret punch presses enable you to achieve top-quality results thanks to precise and fast turret operation, enhanced hydraulics, and 3 automatic index stations. Featuring a movable table, part unloading bin, automatic clamps, CAD/CAM software, and a control unit, Durma turret punch presses are user-friendly. Automation systems increase both operator safety and productivity, minimizing downtime while maximizing safety. Punching force: 30 tons Working area: 3,000+R x 1,500 mm X-axis travel: 3,000+R mm (repositioning) Y-axis travel: 1,500 mm Y-axis speed: 60 m/min X-axis speed: 70 m/min Combined X+Y speed: 92 m/min Max. strokes per minute (1 mm steps, 1 mm sheet thickness): 1,100 1/min Max. strokes per minute (25 mm steps, 1 mm sheet thickness): 325 1/min Max. marking speed: 1,200 1/min Main cylinder stroke: 40 mm Max. punching stroke: 25 mm Max. cutting capacity with fixed tool station – steel: 6 mm Max. cutting capacity with fixed tool station – stainless steel: 3 mm Max. cutting capacity with index station – steel: 3 mm Max. cutting capacity with index station – stainless steel: 1.5 mm Tool changer (27 stations, without tools and holders): Rjdpfx Abeg Admfehon 11 x A-station fixed: 0.8–12.7 mm 11 x B-station fixed: 12.8–31.7 mm 2 x C-station fixed: 31.8–50.8 mm 1 x D-station fixed: 50.9–88.9 mm 3 x D-station index: 50.9–88.9 mm Positioning accuracy: +/- 0.1 mm Repeatability: +/- 0.05 mm Tool changer rotation speed: 22 rpm Auto-index rotation speed: 150 rpm Max. sheet weight: 200 kg Table height: 940 mm Air pressure: 6 bar Max. punching diameter (D-station): 88.9 mm Motor power: 7.5 kW Main dimensions: Height: 2,310 mm Width without light barriers: 6,300 mm Width with light barriers: 8,300 mm Length without light barriers: 6,650 mm Length with light barriers: 7,650 mm Weight: 19,500 kg

Leto izdelave: 2020, Stanje: novo, številka stroja/vozila: DF0240 - Rev.00, Pressure: 300 t Passage width: 600 mm Stroke: 500 mm Machine weight approx. (without operating fluids): 8.5 t Dimensions (L x W x H): approx. 2275 x 1650 x 4050 mm Return force: 30 t Motor power: 30 kW Max. working height: 800 mm Rodsdxvfkspfx Abhjn Max. approach speed: 10 mm/sec Pressing phase speed: 10 mm/sec Travel distance: 500 mm Ram plate: 600 x 600 mm Table plate: 600 x 600 mm Table height above floor: 850 mm Oil tank: 350 l Oil cooling (electric): 1.5 kW (max) Ejector stroke: 250 mm Ejector force: 50 t Surrounding maintenance platform: 2,800 € Oil drip tray: 2,800 € Upper and lower tooling (for 8 kg salt block): 11,000 € Automatic filling system with 500 kg storage: 58,000 € Increased speed to 80 mm/sec: 19,000 € Each additional meter of conveyor belt: 850 € Light barriers front and rear: 6,800 € Side paneling: 4,200 € 7 m roller conveyor – for salt block transport and intermediate storage: 12,900 €

Stanje: rabljeno, Leto izdelave: 2019, Press force: 100 t Stroke: 1000 mm Table surface: 1045 x 1045 mm Extendable table travel: 800 mm Table speed: 50 mm/sec Dimensions (L x W x H): approx. 2550 x 2850 x 3620 mm Height above floor: 600 mm Piston diameter: 76 mm Ram diameter: 110 mm Ram bore: 40 H7 Cylinder adjustment: 300 mm Total power requirement: 5.5 kW Maximum pump capacity: 24.9 l/min Working pressure: 250 bar Oil tank: 200 l Installation height (distance table to ram plate): 1600 mm Clear opening: 1200 mm Machine weight approx.: 6.6 t Table through-width: 180 mm Redpfjffamxjx Abhsn Clear depth under table: 400 mm Transport load: 1000 kg Cylinder rapid traverse downwards: 1 - 10 mm/sec Working stroke: 3 mm/sec Cylinder return stroke: 1 - 25 mm/sec Movable table speed: 33 mm/sec Frame press with a capacity of 100 tons Cylinder travel 300 mm to right and left Table moves on spring-loaded ball rollers.

Leto izdelave: 2008, obratovalne ure: 24.490 h, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 13.000 kg Višina: 2.082 mm Krmilna enota Znamka: AMADA Model: AMNC-F Redox D Em Ispfx Abhen Dimenzije Dolžina stroja: 4.165 mm Glavni pogon Prebijalna sila: 200 kN Stroj AMADA AC2510 NT je bil izdelan leta 2008. Ponaša se s prebijalno silo 200 kN in revolversko kapaciteto 51 postaj. Obdeluje lahko pločevine do velikosti 1.270 × 5.000 mm in debeline do 3,2 mm. Največja dovoljena teža pločevine je 150 kg, stroj pa omogoča hitro indeksiranje revolverske glave. Za visoko kakovostno prebijanje razmislite o stroju AMADA AC2510 NT, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Aplikacije Prebijanje