Žerjav nadstrešek Žerjav Notranji žerjav Žerjavska steza

Demag Portalkran KBK 250KG KBKI/II KBK1/2 8x4m 250Kg DC Kettenzug

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 82.500 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.750 mm, hitrost pomika os X: 65 m/min, hitrost podajanja osi Y: 65 m/min, hitrost podajanja os Z: 65 m/min, največja hitrost vretena: 20.000 obr/min, hitro pomikanje X-os: 65 m/min, hitri pomik os Y: 65 m/min, hitri pomik na osi Z: 65 m/min, vrtilni moment: 63 Nm, skupna masa: 90.000 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Commissioning: 2008 Control: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions Hodpfxjxl R Hvs Af Ten 3,800 mm (X direction) 1,800 mm (Y direction) 1,150 mm (Z direction) 5-axis machining with a 300 mm long tool in a single setup (A-axis at 90° can be programmed). Machine on power: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table included with the machine. Upon request, we are happy to offer a customized solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool clamping: hydraulic Holding torque (clamped), A & C axes: 2,000 Nm Linear axes drives Feed rate X-, Y- and Z-axis: up to 65 m/min Axis acceleration X-, Y- and Z-axis: up to 5 m/s² Electrical data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weights Space requirement for machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-position tool changer - Work area enclosure Optional at extra cost: - Renishaw RMP60 touch probe - BLUM LaserControl NT mini Machine condition Fully functional, in very good condition. Can be inspected under power until April 2026.

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: A1711012, Pos.1 VEN CLEAN Smart Dust Removal Unit Compressed air dust removal system for cleaning workpieces to be painted, removing dust from profiled workpiece surfaces. Five rotating air blast stars are installed. These detach the dust from the surface. The loosened dust is extracted on both sides by suction ducts. An external extraction system must be provided by the customer. Technical Specifications: Length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h (to be provided by the customer) Compressed air consumption: 980 Nl/min Ionization as jet rod (non-EX) with compressed air nozzles, compressed air consumption 840 NL/min Pos. 2 VEN SPRAY Comfort Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY Comfort CNC 7000 - Year of construction: 2017 - Length: 4,350 mm - Working height approx. 930 mm ±20 mm - Working width: 1,300 mm - Operator side: left - Price refers to refurbished machine - Current condition: machine not refurbished Hsdpfx Aju U Ryyjf Ten - Dual gun drive - Dry extraction - Extraction nozzle diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - Conveyor belt transport system - Continuously adjustable feed speed: approx. 2–6 m/min - With belt cleaning system featuring tungsten carbide scraper. Complete pre-equipment is available for subsequent installation of a second washer. - Gun control, Touch Screen CNC7000 - Installed color circuits: 1 pc. (optionally expandable) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Length: 4,350 mm + (2,060 mm) - Width: 3,540 mm - Height: 2,600 + 440 mm - Free-standing control cabinet - Electrical connection: 23.33 kW / 63 A - Voltage, Hz: 400 / 50 - Color: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also offer installation and commissioning of the system, as well as training for your staff. Upon request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Manufacturer: Elumatec Type SA / SAS 142 Year of Retrofit: 2024 Max. Carbide Saw Blade Diameter: 500 mm Saw Motor Power: 4 kW Saw Motor Speed: 2800 rpm Saw Blade Cutting Speed (500 mm): 4400 m/min Saw Height Adjustment: Infinitely variable, fully electronic Working Area Square 90° max.: 130 x 130 mm Working Area Flat 90° max.: 190 x 130 mm Working Area Round 90° max.: 150 mm Pneumatic Feed Length: 5–560, 10–1120 mm Compressed Air Connection Required: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900 mm x 1400 mm x 1500 mm Footprint LxW: 2900 mm x 1400 mm Additional Description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics Following the completed retrofit, the machine is in as-new condition both technically and visually. The machine is completely overhauled at our facility to customer specifications. Among other upgrades, the following components have been renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve assemblies - Maintenance of minimum lubrication system - Replacement of general wear parts - Refurbishment of the safety enclosure Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and wear parts are excluded from the warranty. Optional: - Extension of the cutting range for flats at 90° max.: 300 x 120 mm - Spacer extension (for a premium cut surface without drag marks) - Servo-driven material feed - Servo-driven saw blade feed - Heavy-duty clamping device for material feed pusher - Delivery and installation at your facility Hjdpsuiy Nyofx Af Ten - Operator training for your staff

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 158 h, doseg roke: 1.300 mm, Pozdravljeni, prodajamo demonstracijskega robota UR10e, ki je bil uporabljen za konceptno študijo, katero pa smo kasneje opustili. Hsdpfx Afop E T N Ao Tsn

Stanje: dober (rabljeno), Clamping plate, scribing/marking plate, inspection plate, measuring table, welding table, aligning plate - Clamping plate is from a coordinate measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm - Plate features: with support ribs Hjdpfsfc T Tqsx Af Ten - With 4x leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2,749 kg

Stanje: novo, Leto izdelave: 2026, Stroji po meri, prilagojeni vašim proizvodnim potrebam. Naši stroji, izdelani po meri, so natančno zasnovani in konstruirani tako, da izpolnjujejo edinstvene zahteve vaših proizvodnih procesov. Ne glede na to, ali je vaše glavno področje dodelava, odstranjevanje oksida ali zaobljenje robov, ti stroji zagotavljajo izjemno natančnost in zmogljivost. Hodpshq Dbxjfx Af Ton -Dodelava: Dosezite gladke, visokokakovostne površinske obdelave na različnih materialih ter tako zagotovite stalen profesionalen in sijoč videz. -Odstranjevanje oksida: Učinkovito odstranite površinske okside ter tako zagotovite čisto in brezhibno površino, kar je bistvenega pomena za nadaljnje procese ali nanos premazov. -Zaobljenje robov: Natančno zaoblite robove po želenem radiju, kar poveča varnost in izboljša kakovost končnih izdelkov. -Možnosti prilagoditve: Vsak stroj je povsem prilagojen vašim potrebam, z možnostjo izbire: Hitrosti obdelave: Prilagodljive glede na vaše proizvodne zahteve. Posebne funkcije: Možnost vgradnje sistemov za odsesavanje prahu in hlapov, nastavljivih pritiskov ter programirljivih nastavitev za optimizacijo vašega delovnega procesa. Zgrajeni za dolgo življenjsko dobo… Naši stroji po meri so izdelani za dolgotrajno in zanesljivo delovanje, tudi v intenzivnih proizvodnih ciklih. Ne glede na to, ali gre za manjše projekte ali visoko industrijsko proizvodnjo, ti stroji zagotavljajo vrhunske rezultate iz leta v leto.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1984, Load capacity: max. 300 kg Reel plate diameter: 1,000 mm Maximum outer coil diameter: 900 mm Inner coil diameter: 240 - 560 mm Maximum coil width: 180 mm Hsdpfx Afjf S I I Hs Tjn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, nosilnost: 1.200 kg, Oprema: nožno daljinsko upravljanje, Varilna vrtljiva miza z nosilnostjo 1200 kg, certifikat CE. Zelo robustna izvedba. Hitrost je zvezno nastavljiva od 0,05 do 0,7 obr/min, po želji možno večjo hitrost. Premer vrtljive mize 1200 mm. Naklon do 120°. Višina v vodoravnem položaju 950 mm, nagnjena do sredine 720 mm. Ročno in nožno daljinsko upravljanje. Dimenzije: dolžina 1,35 m x širina 1,2 m. Hodpfx Ajd A Etujf Tsn

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, CNC machining center with 4 controlled axes and automatic spindle rotation (0-180°). This allows the machine to access all three profile sides of the workpiece without manual repositioning. The machine features a water-cooled spindle with up to 20,000 rpm. It is suitable for processing profile bars or components made of aluminum, PVC, light metal alloys, and steel up to 2 mm. It comes with a manual tool magazine with 9 slots and an automatic tool magazine with 4 slots on the left side of the enclosure. Additionally, there is a second automatic tool magazine with 4 slots on the right side of the enclosure. Positioning of the profile is accomplished using a pneumatically operated left stop, while clamping is handled by 4 robust clamps, which are automatically positioned and controlled. Thanks to a second pneumatic stop on the right, long workpieces—up to twice the length of the machining area—can be processed (oversize processing). Furthermore, a movable clamping area facilitates loading and unloading of the workpiece and substantially increases the machinable cross-section. The machine is equipped with the following special accessories: - CamPlus software - Shape software for creating custom machining operations or importing drawings/machining contours - an additional tool magazine - a second stop - a protective hood (completely enclosed) Hjdpeyzb Ekofx Af Tsn Installation, commissioning, and operator training can be provided by us upon request!

Stanje: rabljeno, Mounting: MK 4 Hjdpfx Afeb N Ezro Tjn