Univerzalni stružnica za kovino

CORMAK CORMAK 410X1500

Stanje: novo, Leto izdelave: 2026, Grinding of contoured materials using the side table Easy and quick abrasive belt replacement via a lever Movable unit enables operation in both horizontal and vertical positions Psdjvuggzjpfx Altjgp Standard equipment includes an additional height-adjustable table Tensioning device ensures consistent abrasive belt tension Compact machine dimensions with a wide range of applications Technical data: Belt size [mm]: 2010 x 152 Worktable size [mm]: 790 x 221 Table height [mm]: 810 Stand height [mm]: 600 Auxiliary rounding table size [mm]: 514 x 221 Max. grinding length [mm]: 790 Extraction nozzle diameter [mm]: 100 Face and edge grinding angle [°]: 0 - 45 Belt speed [m/min]: 840 Motor power [kW]: 1.1 Power supply [V]: 400 Weight [kg]: 75 The listed price is net. Transport not included.

Stanje: novo, TC 205 x 1000 CVS Exhibition machine, color blue Technical Data: Swing over bed: 410 mm Centre height: 205 mm Swing over cross slide: 234 mm Swing in gap: 610 mm Bed width: 280 mm Between centers: 1000 mm Number of spindle speeds: 8 Speed range: 80 - 2000 rpm Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle taper: MT 6 Tailstock quill travel: 130 mm Tailstock taper: MT 4 Max. tool size: 22 mm Cross slide travel: 225 mm Top slide travel: 130 mm Thread cutting imperial: 2 - 72 T.P.I Thread cutting metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Main motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splashguard rear panel - 4-way tool post - Foot brake Psdpfx Aljvzmtzotjgp - Emergency stop switch - Coolant system - Chip tray - Fixed centre - Change gear set - Reducing bush for main spindle - Machine pads - Service tools - Operating manual

Stanje: dober (rabljeno), NHH Lathe Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Podpfx Aljmw Ukcetegp Turning length: 600 mm Heidenhain digital readout Chuck diameter: 155 mm Spindle speed: 2,000 rpm Dimensions (LxWxH): 150 x 85 x 155 cm

Stanje: novo, Leto izdelave: 2025, Rotary vane dry vacuum pump. Available in stock. Brand new pump. Comes with a 12-month warranty. Nominal flow rate: 25 m³/h at 50Hz. Ultimate vacuum: 150 mbar abs. For any questions, please contact us. Psdjftzpvepfx Altogp

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders Podpfx Aew E Nnboltogp 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Forklift Kalmar LMV 9-600 Load capacity 9 t Diesel Pedpfsvq Im Uex Altogp

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: xxxx, Ref. No. 24265 Technical data: Pgsdpfx Alotx Ubrotjp - Shaft mount diameter: 35 mm - Usable shaft length: 90 mm - Drive speed: 1450 rpm - Drive: 400 V / 4.4 kW - Space requirement approx.: W 1300 x H 2500 x D 800 mm - Weight approx.: 200 kg

Stanje: novo, Leto izdelave: 2026, The Cormak PT265 Planer-Thicknesser is a robust, well-designed machine offering extensive adjustment capability and mechanical processing of both hard and soft wood. Adjustment is straightforward, and switching from planer to thicknesser mode takes just a few seconds. Latest machine version features an innovative table opening system: ❌ Competing, older machines use "butterfly-style" tables, which require calibration of both infeed and outfeed tables before each use. Even minimal discrepancies can cause material damage and unwanted results. ✔️ The new, combined table design enables simultaneous, precise adjustment of both tables! Once set, the calibration is permanent. When changing the planing height, both tables move together. ✔️ This translates to time savings, improved ease of use, and 30% higher planing accuracy compared to the previous generation—particularly important when working with thinner materials. Vibration-resistant, stable construction Weighing in at 170 kg and equipped with wide, ground cast iron tables (265 mm), the PT265 ensures excellent stability and safe operation. Additional rubber feet further minimize vibrations during use. VERSION with powerful total motor output S6: 2.6kW The PT265 stands out for its exceptionally strong S6 2.6 kW (S1 2.2 kW) motor—far more powerful than competitors, providing higher efficiency and operational stability. A more powerful motor guarantees smooth performance and easy processing of hard woods, which require greater force—something this machine handles trouble-free. Effortless changeover from jointer to thicknesser. Transition from jointer to thicknesser mode is fast and simple: unlock the eccentric cams, lift the tables, and reposition the chip extraction hood. Pgedpevxhznofx Altop Work precision. - Smooth, graduated table height adjustment. - Thicknesser table centrally mounted on a column, height adjusted via hand crank. - 700x150 mm aluminum tilting fence with graduated scale, adjustable from 90° to 45°. Technical specifications: Cutter block diameter [mm]: 75 Cutter block speed [rpm]: 4000 Dust extraction port diameter [mm]: 100 Tilting fence angle [°]: 0 - 45 Number of knives: 3 Cutter block length [mm]: 262 Knife dimensions [mm]: 2500x300x30 Max. planing width [mm]: 265 Max. thicknessing width [mm]: 265 Max. planing height [mm]: 180 Max. thicknessing depth [mm]: 3 Max. planing depth [mm]: 2.5 Thicknesser feed speed [m/min]: 6 Fence dimensions [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1080 x 269 Weight [kg]: 170 Total motor power: S6: 2.6 kW Power supply: 400V

Leto izdelave: 2021, stanje: novo, Retrofitting kit for 2-axis digital readout consisting of: FAGOR digital display with scales for Y and Z axes. Matching scale brackets for HF50 Bracket for mounting the display behind the machine (see picture) Pgsdjhcn Efopfx Altep

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) Pgedpemhhf Sjfx Altjp - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.