Rezkalni stroj

CONTUR FPU-3

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter Lhsdpoxmhdnefx Aacoc - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Equipment details: - Frequency inverter quality made in the EU - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Lhjdpfxet U Rm Ie Aacsc Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 21.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S4E184001, premer struženja nad prečnim suportom: 430 mm, stružna dolžina: 670 mm, premer struženja: 220 mm, izvrtina vretena: 45 mm, največja hitrost vretena: 6.300 obr/min, skupna masa: 4.300 kg, Rabljeni CNC stroj za trdo struženje s protivretenom Proizvajalec: EMCO Tip: Emcoturn 45E Leto izdelave: 2018 Delovne ure: malo Krmiljenje: Siemens 828D Lhsdew Rrvwepfx Aacec Število pogonskih orodij: 12 kosov Največje število vrtljajev: 0–6000 min⁻¹

Stanje: rabljeno, Leto izdelave: 2014, Technical details: Maximum grinding diameter: 3-220 mm Regulating wheel width: 500 mm Maximum grinding wheel width: 500 mm Approximate machine weight: 16 t Required installation space: approx. 12 x 10 x 8 m Minimum/maximum grinding wheel diameter: 420-610 mm Grinding wheel diameter x width - internal: 304.8 x 500 mm Regulating wheel diameter min./max.: 300-350 mm The machine is currently configured for plunge grinding. Centerless grinding with automation and PPM Marposs; Güdel Ledpfx Ajt Uw Avsacohc Grinding with JUPITER means centerless cylindrical grinding, optionally also with CBN. JUNKER combines this grinding method with CBN grinding wheels, resulting in significant productivity advantages, especially for high-volume production, due to the long service life of the grinding wheels. In addition, simultaneous material removal over the entire workpiece length allows for significantly reduced machining times in both mass production and small batch sizes. JUPITER Grinding Processes There are two forms of centerless grinding: through-feed grinding and plunge grinding. Both processes can be performed with the JUPITER series. Typical applications for through-feed grinding: Bolts and bearing bodies, large rings, small rings, piston components (e.g., for compressors), shafts with constant diameter, piston rods (e.g., for shock absorbers), small pistons for hydraulics and injection, precision wires and rods, piston pins. Typical applications for plunge grinding: Rotor shafts, gearbox components, bearing surfaces of camshafts, tube sections for assembled camshafts, universal joints, needle parts for injection systems, valve stems, barrel rollers.

Stanje: zelo dobro (rabljeno), CNC stružnica DMG CLX 450 V3, letnik 2018, Siemens, v zelo dobrem stanju Lhedpfox Hqh Sex Aacjc

Stanje: rabljeno, Leto izdelave: 2007, Turning diameter 300 mm Swing diameter over bed 430 mm Swing diameter over cross slide 300 mm Control SIEMENS, SINUMERIK 840 D Travel path - X 160 mm Travel path - Z 510 mm Maximum workpiece length 480 mm Main spindle bore 53 mm Main spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Main spindle motor 15 kW Sub-spindle bore 53 mm Sub-spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Sub-spindle motor 15 kW Ljdpewx R Rkjfx Aacjhc C-axis resolution 0.001° C-axis rapid traverse 1000 rpm Tool turret 1 x 12 stations Number of driven tool stations 12 Tool holder shank (DIN 69880) VDI 25 Speed of driven tools 0 - 8000 rpm Torque 16 Nm Power 4 kW Feed force X/Z-axis 4000 / 6000 N Rapid traverse X-axis 24 m/min Rapid traverse Z-axis 30 m/min Total power requirement 38 kVA Machine weight approx. 4 t Machine dimensions L x W x H 2.65 x 1.84 x 2.32 m Accessories: Collet chuck 173 E on main spindle, Collet chuck 163 E on sub-spindle, Bar loader manufacturer FMB, type turbo 3-36/3200 A, Year 2018 for bar diameters up to 36 mm and bar lengths up to 3200 mm Various tool holders for turret (no driven holders), Coolant system

Stanje: novo, Leto izdelave: 2026, Overhauled, as-new machine, modernized to meet the legally required safety standard “state of the art” according to operational safety regulations of the professional associations. Control Cabinet Electronics Installation of a new CE-compliant control cabinet in accordance with the latest statutory regulations of the professional associations: BGVA 3 / DIN EN 60204-1 new machine standard. Optional: complete machine in CE execution. A CE declaration of conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the legal manufacturer. This ensures the machine complies with the OPERATING SAFETY REGULATION (BetrSichV). The machine’s year of construction is considered to be the delivery date. Standards applied: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1. Control 3-axis FPS Aktiv digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed stages for maximum torque / milling performance Feed 5 to 500 mm/min, infinitely variable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z: 800 / 300 / 400 mm Table Rigid angle table, 1000 x 440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp Ledpeh Sptnefx Aacshc • Central lubrication • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Stanje: dober (rabljeno), Z digitalnim prikazom Z vrtalno in rezkalno glavo Hodi 330 x 400 x 475 mm Vpenjalna površina mize 650 x 245 mm Vreteno ISO 40 Hitrosti vretena 63–2'800 vrt./min Različna dodatna oprema Lhjdpfxjw Nnuts Aacsc MARCELS MASCHINEN CH

Leto izdelave: 2002, Stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Lhodpfxslz Rvle Aacjc Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: novo, Table width: 3000 mm Table length: 1500 mm Torch heads: 1 Control system: CNC Feed rate: 20,000 mm/min Total power requirement: 15 kVA Required floor space: approx. 4.5 x 2.5 m * Heavy-duty machine bed with precision guides for smooth machine movement * Ball-bearing cross carriage for height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting areas ensures maximum precision * Automatic height sensing and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Machine setup or relocation possible using a plug & play process with forklift, pallet truck, or crane * 3-sided access to the cutting area due to cantilever design SATOTEC Downdraft Table: The SATOTEC table system features a robust table construction for a max. cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is fitted with replaceable flat steel slats, 3 mm thick and mounted at a 45° angle. The slat spacing is 50 mm. Kjellberg Q1500 Power Source: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range 0.5 to 40 mm * Maximum pierce thickness 30 mm, upgradable using ProPierce Technology * Marking, notching, and center punching possible even on coated metal materials Ledpfx Aopm U U Neacshc * Inverter power source with digitally controlled, fully electronic process * Integrated cooling with semi-automatic filling and draining Gas Control: Fully automatic, processor-controlled plasma all-gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control TEKA EcoCube 5.5 kW Extraction Unit Filter medium: dry, grease-free or oil-free dust/fume Filter area: 100 m² (4 cartridges at 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4,500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50Hz or 480V 60Hz Current draw: 11.5 A Current type: 3Ph+N+PE Fan mounted on the system, incl. silencer bend, right side Motor control: frequency inverter Noise level: 75 dB(A) + max. 10 dB(A) during cleaning pulse Intake socket: NW 250 mm via intake duct, left side Exhaust: via silencer bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with a bulkhead fitting - Compressed air connection with hose tail d=8mm - System equipped with grounding stud - Cables in UL specification - EATON frequency inverter on the left in the attached control cabinet