Rezalni mlin / granulatorji

CONDUX Schneidmühle CS 500/600-IIA

Leto izdelave: 2003, Stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Nwjdpfxsiyyf Is Ag Toc Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Leto izdelave: 1972, Stanje: rabljeno, številka stroja/vozila: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Nsdpfxjb Tdquj Ag Tjwc Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 990 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna višina: 3.900 mm, vhodni tok: 63 A, skupna dolžina: 9.500 mm, skupna širina: 4.500 mm, moč: 15 kW (20,39 KM), Oprema: dokumentacija / priročnik, Pelletizing plant for a wide range of materials, such as wood, Miscanthus, agricultural by-products and waste products (hay, straw, corn stalks, etc.), and feed. This is a complete plant built on a base frame and consisting of the following components: - Raw material storage bin, 4m³, including agitator. This has been expanded by approx. 3–4m³ using wooden panels. Nedpfoxv Dkcsx Ag Tjwc - Intermediate auger to the hammer mill - Hammer mill (11 kW) for processing wood chips or other materials - Inclined mixer for material homogenization including moisture measurement, dosing, and level control - Dosing container for pressing aids, feeds into inclined mixer - Dosing screw conveyor for optimal material feed to the press (speed-controlled) - Press, 15 kW, including full indicator, temperature monitoring, and discharge chute - Conveyor belt to the dedusting screen - Dedusting screen with material outlet at 3 m height The system is designed for easy extension with a second press, each 15 kW. The entire plant is centrally operated via Siemens PLC with touch display. All parameters are monitored to ensure the press is safely shut down in case of faults. Remote maintenance allows operation and monitoring of the press from any PC. The chip dryer, shown on photo 2 mounted on the wall with discharge and control unit, is also for sale. Please contact us for further details.

Stanje: novo, Leto izdelave: 2026, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency inverter (FU) – this controls the speed of the sliding floor. The bales are placed on the sliding floor and the feed of the milling unit is started. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the bale breaker is combined here with a straw shredder. Technical Data Bale Breaker: Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on sieve size used in the straw mill, kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw. Max size square bale: 2400 x 1200 x 800 mm (L x W x H) Milling unit motor: 5.5 kW, 380 Volt Sliding floor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for larger straw shredder (18.5 kW) + €3,940 net Technical Data MHZ with Special Hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Sieve with interchangeable inserts available in (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, overload protection, and 8 m power cable, ready to plug in Blow-out spout 160 mm Blow distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options at additional cost: Feeding auger + €970 net Cyclone (suspension to be provided by customer) *should be no more than 10 m away + €2,970 net Nedpfxob Nulhj Ag Tjwc Simple filter €1,750 net --- Other options: Industrial extraction system (ex-demo) + from €9,950 net Optional rotary valve *renders material pressureless + €5,750 net Control system: from €1,620 net Special breaker extension 3 m (*other dimensions must be calculated) + €9,750 net Briquette press MPP 180 S; little-used demo unit 70 mm briquette – up to 100 kg/h from €39,700 net * Larger machines upon request --- Description: muetek bale breaker has been developed for dissolving round and square bales of hay and straw. The shredder attached to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build. muetek bale breakers of the MHB series are equipped with a chain conveyor on which the straw bale can be placed using a front loader. The support surface is adjustable depending on the bale type. The chain conveyor pushes the bale against the milling rotor, with adjustable feed speed. The milling rotor is equipped with several teeth that tear up the straw bale. The straw separated from the bale is ejected. --- Basically, the machines are suitable for dry input materials: - Straw - Hay --- Disintegration of hemp is only possible with a special breaker Surcharge approx. €9,720 net (depending on version) Shredding of hemp is not possible with the straw mill. Requirements for the input material: Maximum moisture content 12%

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour; bottle formats: 500ml/750ml/1000ml/1500ml; max. blow air pressure: 40 bar; dimensions (L/W/H): approx. 7000mm/4300mm/3100mm; weight: approx. 20,000kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorting unit, and chute. Documentation available. An on-site inspection is possible. Nsdpfx Aget Eu Aze Towc

Stanje: dober (rabljeno), Jaw opening: 150x80mm Nedpfx Agsfhnv Ie Tewc 2 rotary knives (95mm)

Stanje: rabljeno, Leto izdelave: 2002, Swing diameter: 630 mm Turning length: 3000 mm Swing diameter over cross slide: 480 mm Spindle speeds: 9 - 1800 rpm Spindle bore: 83 mm Tailstock quill taper: MT 6 Total power requirement: 22 kW Machine weight approx.: 5400 kg Space requirement approx.: 5250 x 1900 x 1750 mm Nwsdpowz Rvljfx Ag Toc Equipment: - Digital readout - 3-jaw chuck Ø315 mm ROTA-S PLUS - MULTI-FIX quick-change toolpost - Digital speed display - Coolant system - Rapid traverse (longitudinal and facing) - Steady rest - Live centre - Chuck guard - Chip guard/rear panel - Machine lamp - Machine feet - Operating manual

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Arburg 1200 T 2000-800 (vertikalna mašina sa obrtim stolom 1200 mm) Jedinica za zatvaranje 2000T Prečnik stola: 1200 mm Ugao rotacije: 180 stepeni Sila zatvaranja: 200 tona Maks. sila otvaranja kN/mm: 115/500 Jedinica za ubrizgavanje Prečnik puža: 45 mm Zapremina šuta: 318 cm3 Težina šuta: 291 g Pritisak ubrizgavanja: 2470 bar Nwodpfswugczox Ag Tsc 1. Model: T-model 2. Tip mašine: 1200 T 2000 - 800 3. Jedinica za plastifikaciju: Termoplastični cilindar 45 mm, visokootporan na habanje 4. Puž: Ojačana spojka puža za klinastu geometriju spajanja 5. Upravljanje: SELOGICA 'direct' sistem upravljanja 6. Tehnološki nivo: Nivo 2, servo-upravljan sa 2 regulacione pumpe 7. Obrtni sto: Napredno ergonomsko specijalno izvođenje, dvofazno, 180° napred/nazad naizmenično 8. Dizne: Otvorena dizna 45 mm sa vrhom dizne 9. In-Mould igličaste dizne: Električne &

Stanje: novo, Table diameter 900 mm Table load capacity 1.0 t Swivel range 135 degrees Rotational speed 0.12 - 1.2 rpm Faceplate height 820 mm Welding current 500 amperes Total power requirement 0.75 + 0.55 kW Machine weight approx. 1.1 t Space requirement approx. 1.5 x 1.0 x 0.9 m Nodpfx Aofv Axxeg Towc • Self-locking gearbox, therefore no overrun or backrun under eccentric load. • Electronic components from Schneider, Siemens, and Delta. • Infinitely variable speed control of the turntable via frequency inverter. • High stability due to robust construction. • Welding current transmission. • CE certificate. • Excellent price / quality ratio. • The D-HBE series is supplied as standard with a wired remote control and foot switch.

Stanje: novo, Table diameter: 2500 mm Table load capacity: 20.0 t Swivel range: 0 - 135 degrees Rotational speed: 0.04 - 0.4 rpm Torque at faceplate: 40,000 Nm Njdpfxjfv Axmj Ag Towc Through-hole in table: 200 mm Welding current: 1000 Amps Total power requirement: 5.5 + 11.0 kW Machine weight approx.: t TURN-TILT TABLE WITH LARGE THROUGH-HOLE • Self-locking gearbox, no forward or backward movement with eccentric load. • Electronic components by Siemens and Schneider. • Frequency-controlled, very precise speed regulation. • Turntable with large through-hole and T-slots. • High stability due to clever design. • CE certification. • Excellent price/quality ratio. • The D-TLP series comes with remote control and foot pedal (left/right). No original photos. However, construction is identical.