Univ, obdelovalni center z avtomatizacijo

Chiron MILL 800 five axis

Stanje: rabljeno, Description: General: Year of manufacture: 2009 Control: Siemens 840 Dsl (C200-4D SL) Bar capacity: 65 mm Milling spindles: 18,000 rpm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. Power: 35.5 kW Max. Torque: 170 Nm C-axis: 0.001° Z-axis: 390 mm Bar capacity: 65 mm Clamping cylinder: Hollow clamping cylinder Chuck: 3-jaw chuck Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Max. Power: 35.5 kW Max. Torque: 170 Nm C-axis: 0.001° X-axis: 600 mm Z-axis: 390 mm Bar capacity: 65 mm Chuck: 3-jaw chuck Tool carrier I: Technology: Milling spindle on cross-slide Speed: 18,000 rpm Tool holder: HSK 40 X-axis: 350 mm Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool carrier II: Technology: Milling spindle on cross-slide Speed: 18,000 rpm Tool holder: HSK 40 Njdpovxmy Nefx Adxjdd Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool magazine: Technology: Chain magazine Number of stations: 80 pcs Tool changer: Double gripper Max. tool length: 180 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system with filter Parts removal: Gantry parts picker Bar feeder interface: Electrically pre-equipped Tool monitoring: Drill breakage control

Stanje: delavnici obnovljeno (rabljeno), potovalna razdalja osi X: 310 mm, pomik osi Y: 294 mm, pomik po osi Z: 210 mm, skupna masa: 3.000 kg, največja hitrost vretena: 50.000 obr/min, Used HSC Machine RXD5 Ndsdpfxjlzhhks Adxed -Refurbished- The machine is fully refurbished, inspected, and measured at our facility. The machine once again meets new machine tolerance specifications! Working Area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Linear Axis Drives: Linear motors on all axes. - Rotary Axis Drives: Highly dynamic direct drives with integrated cooling. - Feed rates: 0 - 40,000 mm/min on all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, tool wear monitoring, and tool breakage control for milling tools. - Chuck control, 1st chuck - Emulsion cooling system with mechanical oil mist extraction - RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - 24-position tool changer for parallel main time tool changes - High-precision option - Remote maintenance via TeamViewer - Transport dimensions (machine): W 2,425 x D 1,925 x H 2,070 mm - Weight: approx. 3,000 kg The machine can be inspected in operational condition at any time. For more information about the type and scope of our refurbished machines, feel free to visit our website or our Hüttmann YouTube channel.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, DESCRIPTION Ndodpsiva Dkofx Adxjd Hermle C 800 V CNC Vertical Machining Centre, manufactured in August 2000 in Germany. This milling center operates in three axes, with maximum X / Y / Z travel distances of 800, 600, and 500 mm. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN connection to an external computer. Additionally, this machining centre comes with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel probe, and an electrical cabinet cooling unit. The spindle reaches a maximum speed of 15,000 rpm. Recorded spindle hours: approximately 4,500 hours. The total weight of the machining centre is around 7 tons. Technical specifications of the Hermle C 800 V CNC machining centre – Travel (X / Y / Z axis): 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C 800 V CNC machining centre – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Tool holders: SK40 – Through-spindle coolant pump: 40 bar – Electrical cabinet air conditioning – Swivel probe – Chip conveyor Available separately as pictured: Tool pre-setting device Various SK40 tool holders Heidenhain TS32 touch probe (as new)

Stanje: rabljeno, Leto izdelave: 2016, dolžina podajanja os X: 711 mm, dolžina pomika po osi Y: 406 mm, dolžina podajanja os Z: 394 mm, Pomiki osi X Y Z: 711 x 406 x 394 mm; velikost mize: 864 x 381 mm; nosilnost mize: 113 kg; hitrosti hitrega pomika: 61 m/min; moč vretena: 15 KM; hitrost vretena: 15.000 vrt/min; stožčasta vpetja vretena: BT40; 18-postajni avtomatski menjalec orodja (ATC); CNC krmilje Haas; hladilna tekočina; odvijalnik ostružkov. Nodjv Sut Repfx Adxedd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Control system: GE FANUC 21i-TB Swing diameter: 533 mm Turning diameter: 340 mm Turning length: 355 mm X-axis travel: 209 mm Z-axis travel: 355 mm Nedpfx Adsvw Uqajxodd Spindle bore: Ø50.8 mm Spindle speed: 5,000 rpm Chuck max. Ø200 mm Turret: 12-station Rapid traverse: 30 m/min Drive power: 11 kW Spindle nose: A2-6 Tool holder: VDI30 C-axis: 0.001° (programmable) Dimensions (LxWxH): 2300 x 1700 x 1700 mm Weight: approx. 3,000 kg Equipment & Accessories: - Hydraulic chuck - Short bar loader EMT Super 80 - Manual Guide in FANUC software - Driven tool turret and C-axis - Tailstock - Parts catcher - Manuals Very good condition. The machine operates accurately.

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Control: OSP-P20L-R Swing diameter over bed: 450 mm Swing diameter over cross slide: 350 mm Swing diameter over compound slide: 300 mm Njdpovk Sqkofx Adxodd Spindle bore: 43 mm Spindle speed range: 75 - 3,000 rpm X-axis feed: 0.00001 - 39.37 mm/rev X-axis rapid traverse: 20 m/min Z-axis feed: 0.00004 - 38.37 mm/rev Z-axis rapid traverse: 25 m/min Tool turret: 12 stations Driven tools Tool holder: VDI30 Machine weight: approx. 3,800 kg Bar loader: BREUNING IRCO

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 6.050 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 213 mm, pomik osi Y: 572 mm, Stružniški center Haas Tip: ST 25 Leto: 2017 Obratovalne ure: 6047 h Maksimalna nazivna moč, pogonski sklop: 22,4 kW, pogon na jermen Kapaciteta palice, maks. hitrost: 76,0 mm, 3400 obr/min Gibanje osi (X, Z): 213 mm, 572 mm Transporter za ostružke Prehod vretena: 75 mm Njdpordg H Hsfx Adxodd

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 900 mm, pomik po osi Z: 500 mm, model krmilnika: iTNC 530, največja hitrost vrtenja: 18.000 obr/min, skupna masa: 12.500 kg, General Data Measurements width 3970 mm Measurements depth 4629 mm Measurements height 3050 mm Machine weight 12700 kg Main Drive Number of spindles 1 Spindle speed range 16000 rpm Spindle motor power 10 kW Tool taper SK 40 Number of axis 3 Movement Ndjdpfx Aovambijdxjd X-Axis Movement 1200 mm Y-Axis Movement 900 mm Z-Axis Movement 500 mm Unfpvoddib Table Outer length 1400 mm Outer width 900 mm This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It features a robust clamping table measuring 1400 x 900 mm and a high-performance milling spindle with a maximum power of 10 kW, torque up to 87 Nm, and speeds up to 16,000 RPM. Ideal for complex machining tasks, the HERMLE C 1200 V machine we have for sale offers precision and durability. Contact us for more information. Application Types Milling

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE Nedpfxeu Hadhj Adxjdd - Spindle nose: A2-5 - Spindle drive power: 22 kW - Spindle speed: 6000 rpm - Max. bar diameter: 60 mm - Max. machinable diameter: 200 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 22 kW - Spindle speed: 6000 rpm - Max. bar diameter: 60 mm - Minimum C-axis resolution: 0.001° - Z travel: 445 mm TURRET 1 - Number of positions: 14 - Number of driven positions: 14 - Travel X/Z: 105/400 mm - Travel Y: 120 mm - B-axis stroke: +90/-270° - Tool type: VDI 25 - Driven tools speed: 6000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 4,975 x 2,890 mm - Machine height: 2,050 mm - Machine weight: 4,800 kg EQUIPMENT - Control: Siemens 840C - Coolant tank * with high-pressure pump - Chip conveyor - Parts removal system - Parts conveyor belt - Bar feeder: LNS

Stanje: delavnici obnovljeno (rabljeno), potovalna razdalja osi X: 310 mm, pomik osi Y: 294 mm, pomik po osi Z: 210 mm, skupna masa: 3.000 kg, največja hitrost vretena: 50.000 obr/min, Used HSC machine RXP400DS/ RXD5 -Refurbished- The machine is fully refurbished, tested, and measured in our facility. The machine then meets the tolerances of a new machine! Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Drives of linear axes: Linear motors on all axes. - Drives of rotary axes: High-dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min on all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring Ndjdpolzhhcsfx Adxed and breakage control for the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction - RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - 12-position linear tool changer; optional conversion to chain magazine - Option: high precision - Remote maintenance via Teamviewer - Transport dimensions of the machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: approx. 3,000 kg A demonstration of the machine in ready-to-operate condition is possible at any time. You are also welcome to find more information about our refurbished machines on our website or on our Hüttmann YouTube channel.