Obdelovalni center

HAAS DT-2

Stanje: pripravljen za uporabo (rabljen), Na voljo sta dve skoraj identični CNC rezkalni stroji Haas. Delovni hod X/Y/Z: 710mm/400mm/390mm, dimenzije mize X/Y: 710mm/400mm, največja obremenitev mize: 250kg, število vrtljajev: 10000 1/min, moč: 11,2kW, hitro pomikanje: 60m/min, podajalna hitrost: 30m/min, število orodij: 20, natančnost pozicioniranja: +/-0,005mm, ponovljivost: +/-0,0025mm. Dimenzije stroja X/Y/Z: pribl. 1700mm/1800mm/2400mm, teža: pribl. 2400kg. Vključno z avtomatizacijo. Dokumentacija na voljo. Ogled na lokaciji je mogoč. Gijdpfexwn Nfjx Afqel

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Gjdpfjwuddvsx Afqeil Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 26 kVA WEIGHT AND DIMENSIONS - Space requirements: 3620 x 3160 mm - Machine height: 3000 mm Gsdpoup Hw Esfx Afqsil - Machine weight: 7,300 kg MACHINE HOURS - Operating hours: 48,894 h ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extractor: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Control: FANUC 18i-MB Travel X / Y / Z: 1,020 / 510 / 510 mm Feed rate X / Y / Z: 1 - 10,000 mm/min Rapid traverse X / Y / Z: 48,000 mm/min Table size (W x D): 1,200 x 510 mm Spindle speed: 15,000 rpm Internal coolant: 20 bar Tool holder: BT 40 Tool changer: 48 positions Weight: approx. 7,500 kg Dimensions (W x D x H): approx. 3,100 x 2,200 x 2,900 mm Giodpfjtz T Smex Afqel Hours: Spindle hours: 9,310 Accessories: RENISHAW tool measurement system Type: OMP 40, coolant tank, machine manual, machine lamp, chip conveyor

Stanje: novo, Leto izdelave: 2026, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing of small to medium-sized workpieces. The unit features a digital process timer, digital speed display, and a dosing pump (wet version). The plate speed can be adjusted via frequency inverter. The Turbo 60 is available in both dry and wet configurations. It can be seamlessly linked with the ERBA YE-60 separation section as shown in the images. Technical specifications: - Gross volume: 60 liters - Drive power: 3.0 kW - Plate speed: 75 to 300 rpm - Optional equipment: tilting motor, sound insulating cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the system including optional accessories, which are available separately and may incur additional charges. Giodpfx Afon Ut Iloqjl If you are interested, we look forward to your inquiry. We will be happy to advise you, without obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). Our initial offer is non-binding and will include information on our general terms and conditions, imprint, and right of withdrawal, before any purchase/contract is concluded.

Stanje: rabljeno, New diesel generator set, power generator, emergency power unit RTE Model 50kVA – identical to DAEWOO DAGFS 50 New, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby power: 55 kVA / 44 kW Rated current: 33 amps Voltage: 400/230 volts, 50 Hz    230 volts, 50 Hz Fuel tank capacity: 99 liters – provides an operating time of up to 8.5 hours at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby: approx. 4 liters/hour Gsdpfx Afsxlkq Uoqjil Drive engine: 4-cylinder inline diesel engine RICARDO ZH4105ZD Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple, compact construction with sound-insulated metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 amp sockets (3-pin, 230 V) - 1x CEE 16 amp socket (5-pin, 400 V) - Terminals for cable power connection for external consumers, e.g. site distribution boxes - ATS module for mains backup operation, enabling automatic emergency power switchover in the event of mains failure Space requirement (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg Brand new machine from stock

Stanje: dober (rabljeno), Leto izdelave: 2015, Stroj je v dobrem stanju, prikazani deli, ki so prikazani ročno, niso vključeni. X: 1025 mm Y: 560 mm Z: 600 mm Heidenhain TNC 620, 16.000 vrt/min, HSK 63 Gijdpfx Aewx N Nfjfqsl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2017, obratovalne ure: 132 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20731, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 300 mm, hitro pomikanje X-os: 90 m/min, hitri pomik os Y: 90 m/min, hitri pomik na osi Z: 90 m/min, nazivna (navidezna) moč: 35 kVA, proizvajalec krmilnikov: Fanuc 31I, največja hitrost vretena: 42.000 obr/min, delovne ure vretena: 132 h, dovod hladilne tekočine: 20 letvica, moč vretenovega motorja: 15 W, nos vretena: HSK E40, vhodna napetost: 415 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Die Maschine befindet sich in einwandfreiem Zustand. Die Bearbeitungsgenauigkeit beträgt +/- 0,0015 mm (gemessen mit Zeiss Micura). Die Maschine ist ausgestattet mit Renishaw OMP400 und BLUM Pico zur Werkstück- und Werkzeugvermessung. Wiederholgenauigkeit beträgt +/- 0,001 mm. Gisdpfxevcfi Ds Afqel High Speed und High Accuracy Option auf Fanuc verfügbar. Eine Besichtigung der Maschine unter Strom ist möglich.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. workable length: 195 mm - Spindle speed: 10,000 rpm - Spindle drive power: 8.2 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 25.4 mm - Spindle speed: 10,000 rpm - Spindle drive power: 8.2 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 9 - Number of driven positions: 4 - Driven tool speed: 5,000 rpm TOOL HOLDER 2 - Number of positions: 8 SECONDARY MACHINING - Number of positions: 8 - Number of driven positions: 4 - Driven tool speed: 7,500 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required space: 2,912 x 1,300 mm - Machine height: 1,720 mm - Machine weight: 2,400 kg MACHINE HOURS - Power-on hours: 44,140 h - Operating hours: 28,118 h - Spindle hours: 15,281 h EQUIPMENT - Control: Fanuc 31i-B - 3-color status light - Powered tooling motors at: S11, S51 - Powered guide bushing - Parts removal unit - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank: KNOLL KF 200/1200 * with high-pressure pump - Bar feeder: Tornos Robobar SBF 326 - Fire extinguishing system * NB: Functionality not guaranteed. To be inspected by a qualified company appointed by the buyer. Gijdpfx Aeuha U Hjfqol

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.650 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS bar loader Fanuc 31iB - 5646 hours Country of manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2700 kg TECHNICAL DATA Godpfx Aokhnqgefqsil Number of axes: 10 Number of spindles: 2 Main spindle Max bar diameter: 16 mm Max machining length: 180 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub spindle Max bar diameter: 16 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool set 1 Number of stations: 5 Number of driven stations: 3 Driven tool speed: 8,000 rpm Tool set 2 Number of stations: 5 Number of powered stations: 3 Driven tool speed: 8,000 rpm End unit Number of stations: 4 Number of powered stations: 3 Driven tool speed: 8,000 rpm Counter operations Number of stations: 6 Number of driven stations: 6 Driven tool speed: 8,000 rpm Electrical supply Mains voltage: 400V All technical data is provided without obligation and is subject to errors or prior sale.