3-osni (X-Y-Z) obdelovalni center CNC

BREMA (BIESSE Group) Vektor PI 25-13 (1R10 - 2MI+1MI)

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 0540/98, Funkcionalnost: popolnoma funkcionalen, Proizvodna številka: 0540/98. Leto izdelave: 1998. Kapaciteta: 400 ton. Dolžina hoda: 300 mm. Število hodov: 10–40 / min. Nastavitev drsnika: 300 mm. Vgradna višina: 700 mm. Dimenzije mize: 1600 x 1300 mm. Neto teža: 45 ton. Odprtina portala: 1600 mm. Zunanje dimenzije: 2 x 3 x 6 metrov. Krmilni sistem: MEAB. Cedpfx Asicbbzjfdsgw Podajalnik / ravnalnik traku: iRON RNE 50B / 11. Odvijalec: iRON SA6000, maks. 700 mm.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Codpfx Aehlp Efjfdegw

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) Cgodpshuthyefx Afdjw maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives immediately ready for operation

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): Cgedpfx Aod Nt Rqsfdjw - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Leto izdelave: 2010, stanje: dober (rabljeno), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating head and the working area on the machine - Numerical control (CNC) with BIESSE Works software on Windows - Vertical panel positioning with 2 panel clamping vices - Panel feed (in the X-axis direction, on the lower support with rubber rollers), movement of clamping vices (in X-axis) for panel/workpiece fixing WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18000 RPM) - No. 1 circular saw (for grooves), 120 mm diameter (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) Csdpfxshknbre Afdsgw - No. 1 drilling head for hinge boring - Total installed power: 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Cgedpfx Aod Rg Dpjfdjw Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: G01747, Obratni premer nad posteljo: 500 mm Obratni premer nad suportom: 280 mm Cgsdpfx Afovfdiusdew Dolžina obdelovanca: 2000 mm Pomik osi X: 280 mm Pomik osi Z: 1935 mm Hitrost vrtenja: 3000 min⁻¹ Vreteno – vpenjalna glava: A2-8 Premer vretenskega prehoda: 82 mm Pospešen pomik X / Z: 4/6 m/min Premer konjičeve puše: 75 mm Stožec konjiča: MT5 Glavni motor vretena: 11/15 kW Dimenzija držala orodja: 25 x 25 mm Pomik konjiča: 150 mm Položajna natančnost osi X/Z (C, Y): 0,018/0,021 mm Ponovljivost osi X/Z (C, Y): 0,014 mm Teža: 2800 kg

Stanje: dober (rabljeno), Leto izdelave: 2008, Avtomatski križno vezalni stroj z vrtljivim krožnikom Enojna vezava max. število paketov/min: 40 Dvojna vezava max. število paketov/min: 20 Križna vezava max. število paketov/min: 18 Širina paketa: 200-560 mm Dolžina paketa: min 200 mm Višina paketa: 10-440 mm Diagonalna mera paketa pri križni vezavi: max 560 mm Csdpfx Afjg Nzv Ujdogw Elektrika: 200-440V, 3-fazni AC, 50 Hz, 1,5 kW Teža: 540 kg

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Csdpeifnzdjfx Afdjgw Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Stanje: pripravljen za uporabo (rabljen), Effective width: 1500 mm, screw diameter: 2 x 500 mm, motor power: 2 x 3.5 kW, outlet: 2 x 800 x 800 mm, length: 7000 mm, conveying speed: 50 m/min, equipped with a steel support frame, fully enclosed design with hopper extension, inspection possible, year of manufacture unknown, completely overhauled in 2022. Cgodpon Tpm Asfx Afdjw