Stiskalnica za odpadke Bramidan B5 W VD

Bramidan Baler B5 Wide VD

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Fgedpfsvwlqqox Aazek Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 2003, obratovalne ure: 43.000 h, Stanje: potreben popravila (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2003 (W230-005), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2003 Hardox bodemvloerplaat uitsluitend Kunststof ventiel Anti-ratten bekabeling Fedpekcgynefx Aazogk Draaiuren: 43.000 Deze pers kan tevens volledig gereviseerd worden verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Hierbij geldt een garantie van 2 jaar. Neem contact met ons op voor meer informatie of een vrijblijvende offerte. Algemene principes van revisie Reiniging & demontage Voordat de revisie daadwerkelijk plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten nagemeten en waar nodig opnieuw gelast. Dit geldt in elk geval voor de volgende onderdelen: • Aanpersplaat (ram) • Frame • Kanaal • Voorpersklep Na demontage en inspectie wordt de ram opgelegd en voorzien van nieuwe ramwielen. De beschermroosters en de voorpersklep worden waar nodig uitgedeukt en gerepareerd. Overspuiten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen & slangen worden vervangen. De hydraulische componenten worden voorzien van nieuwe pakkingen. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en waar nodig vervangen. Alle aansluitdozen worden vervangen en gemonteerd op goed toegankelijke locaties. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vernieuwd. Cilinders: De cilinders worden opnieuw verpakt en, indien nodig, voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC-kast: De schakelkast wordt gecontroleerd en gereinigd. Waar nodig worden elektronische componenten vernieuwd. De PLC en HMI (bedieninterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de nieuwste software.

Stanje: rabljeno, Leto izdelave: 2003, Technical details: Pressure: 40 t Chamber opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions of the machine: 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with conveyor unit/transport belt (LxW): 4500 x 1000 mm, motor-driven with 3-fold automatic tying unit Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm, volume: 1.2 m³ Bale size (LxWxH): 300 – 1500 x 800 x 800 mm Bale weight: 250 – 450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; filling height: 2500 mm Fedeu Nw Ezepfx Aazegk

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HBC 140 2x75kW 2001 (210-008-01), stiskalna sila: 155 t, teža bale: 1.500 kg, pritisk: 250 letvica, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Fsdpfxjtvau Aj Aazogk Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-ratten bekabeling Draaiuren: 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards', inclusief 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de feitelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en opnieuw gelast waar nodig. Dit geldt ten minste voor de volgende onderdelen: • Persplunjer, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en alle benodigde reparatie- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en -slangen worden vervangen. De hydraulische componenten worden opnieuw verpakt. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke plekken. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen door nieuwe. Cilinders: De cilinders worden opnieuw verpakt en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en schoongemaakt. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (mens-machine-interface) worden vervangen door de nieuwste Schneider M340-versie, inclusief de meest recente software.

Leto izdelave: 2008, Stanje: rabljeno, Namen uporabe: Prevoz blaga Primeren za: Stroje za nakladanje in razkladanje Za več informacij se obrnite na ATS Norway. Prosimo, navedite referenčno številko pri povpraševanju: 20081 Fsdpfx Aaow Ia Ngozsgk Specifikacije: Leto izdelave: 2008 Teža: 750 kg Hidravlična črpalka Dolžina: 12 metrov Pripravljen za dostavo Opis: Palfinger PK 14080 C žerjav, letnik 2008, z hidravlično črpalko. Žerjav je bil obnovljen, ko ga je lastnik kupil. Pripravljen za dostavo. Lastna teža: 750 kg Model: PK 14080 C žerjav z hidravlično črpalko

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, obratovalne ure: 8.590 h, številka stroja/vozila: V300397 - 10, Vrsta stroja: BOA Continette II Serijska številka: V300397 - 10 Standard: v skladu z Direktivo o strojih CE in AS 3000 Barva: RAL 5015 Napetost: 240-415 V / 50 Hz Moč hidravličnega motorja: 22 kW Stopnja zaščite: IP 55 Izolacijski razred: F Skupna teža: ± 9000 kg Skupne dimenzije (dך×v): 6415×2665×3034 mm Dimenzije kanala (dך×v): 2030×1000×720 mm Dimenzije lijaka (dך): 1200×730 mm Dimenzije bal (dך×v): spremenljivo*800*730 mm Stiskalna sila (maks. 280 bar): 882 kN Specifični pritisk: 43 t Prostornina hidravlične enote: 800 litrov Specifikacija hidravličnega olja: Shell Tellus TD 46 Maksimalni pritisk: 280 bar Fgedpsihpgasfx Aazsk Število hidravličnih valjev: 3 Tip hidravlične enote (vertikalna): H 160-4 Število vezalnih žic: 4 PLC: Siemens Simatic CPU S7 Operaterska plošča: Siemens zaslon na dotik Glasnost: 75-86 dB(A) 6. julija 2022 je bila stiskalnica zamenjana in ni bila uporabljena Rezervni deli: vilice, vezalne sponke, hidravlični ventili, hidravlični bat za prešo, hidravlično črpalko, PLC moduli, zaslon na dotik

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 25 t, širina odprtine za polnjenje: 800 mm, dolžina polnilne odprtine: 1.050 mm, širina bale: 900 mm, višina bale: 800 mm, vhodna napetost: 400 V, raven hrupa: 85 dB, moč: 18,5 kW (25,15 KM), volumenski pretok: 160 m³/h, Bollegraaf HBK25 na voljo na Cipru. Stroj je v dobrem stanju in vključuje talni transportni trak. Stroj je na voljo takoj. Tehnični podatki balažnega stiskalnika: Pogon: 18,5 kW Dimenzije bale: 800 x 900 x nastavljivo Fjdpfsxbdgujx Aazogk Dimenzija polnilnega lijaka: 1.050 x 800 Tlačna sila: 25 ton Kapaciteta: 160 m3/uro (odvisno od materiala) Tehnični podatki transportnega traku (ocena): Dolžina na tleh: 3.000 mm Diagonalna dolžina: 5.000 mm

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 54.050 h, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, kapaciteta rezervoarja za olje: 2.100 l, moč: 94 kW (127,80 KM), lastna masa: 21.000 kg, Technical Data Baler: Manufacturer: Paal Model: Konti 275 E Year of manufacture: 2006 Total operating hours: 54,050 hours Main press force: 80 t at 300 bar Specific pressing force: 9.7 kg/cm² Feed opening dimensions: 1,600 x 1,020 mm (L x W) Throughput under operating conditions: 350 m³/hour Bale dimensions: 750 x 1,100 mm, length variable Drive power: 75 kW Total connected load: 94 kW Rated current: 180 A Tying: 4-fold vertical, fully automatic Bale weights: up to 750 kg, depending on material Hydraulic oil tank capacity: 2,100 L PLC control (manufacturer, type): Siemens Simatic S7-300 Operator panel (manufacturer, type): Siemens Multi Panel Transport dimensions (press only): 11,152 x 2,152 x 3,000 mm (L x W x H) Machine weight (press): approx. 21 t Fgsdpfsxcxm Ejx Aazsk Condition of the baler with conveyor: The baler and conveyor are in satisfactory, operational condition; refer to photo documentation. Further technical data and dimensions for the conveyor are currently not available. The system is still in operation and is scheduled to be replaced by a larger baling system in the coming months. Scope of delivery: Baling press, bale chute, conveyor belt and machine documentation. Remarks: The documentation (Operating manual, CE, electrical/hydraulic schematic diagrams) is complete. Inspection can be arranged by appointment. Dismantling and loading are the responsibility of the buyer. We do not accept any liability for the technical information provided or for any possible errors.

Stanje: rabljeno, prevoženi kilometri: 812.229 km, moč: 340 kW (462,27 KM), prva registracija: 07/2016, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 08/2024, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, ABS, ASR, cruise control, retarder, differential lock rear axle, roof-mounted air conditioning, air conditioning, heated and electrically adjustable exterior mirrors, electric windows for driver and passenger doors, refrigerator box, multifunction steering wheel, driver's comfort air-suspended seat, 2x sleeper berths, Duo-Matic coupling heads, air suspension with lifting/lowering device front and rear axle, lane assist, vehicle may be fitted with advertising decals and/or lettering. Our offer generally does not include a new technical inspection (TÜV). If a new technical inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may be fitted with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. Fgodsvnpc Sspfx Aazek We are happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 13.284 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 140 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.500 kg, kapaciteta rezervoarja za olje: 2.600 l, Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 140 Year of manufacture: 2017 Operating hours: 13,284 hours (as of October 2025) Main press force: 140 t (max. 153.5 t) Pre-press force: 70 t Feed hopper dimensions: 1,600 x 1,100 mm (L x W) Filling volume / press cycle: 4.34 m³ Theoretical cycle time: 16 seconds Bale dimensions: 1,100 x 1,100 mm (W x H), length variable Drive power: 2 x 75 kW Total connected load: 209 kW Tying: 5-fold vertical, fully automatic Throughput rates: Bulk density 30 kg/m³: approx. 30 t/h Bulk density 50 kg/m³: approx. 46 t/h Bulk density 100 kg/m³: approx. 82 t/h Bale weight: 850 - 1,500 kg Hydraulic oil: 2,600 l Univis N46 Baler dimensions (assembled with hopper and conveyor): 13,200 x 24,200 x 7,333 mm (L x W x H) Transport dimensions baler only: 13,302 x 2,884 x 3,539 mm (L x W x H) Machine weight baler: approx. 51.81 t Technical data – Feed and incline belt with gooseneck: Manufacturer: Bollegraaf Model: HBT 1216/1800 * 23,300 30°/15° Year of manufacture: 2017 Drive power: 7.5 kW Feed belt length: 6,750 mm Incline belt length: 14,400 mm Gooseneck length: 2,150 mm Incline: 30° Usable width: 1,754 mm Fgedpoxpxhvjfx Aazok Sidewall height feed belt: 500 mm Sidewall height incline belt: 800 mm Transport dimensions feed belt with one incline segment: 9,816 x 2,500 x 2,242 mm (L x W x H) Transport dimensions incline belt with gooseneck: 13,472 x 2,800 x 2,729 mm (L x W x H) Pit dimensions: 10,000 x 3,200 x 1,200 mm (L x W x D) Condition: The baler is in very good, immediately operational condition. The conveyor chain should be replaced. The system will remain in operation until December 2025. Scope of delivery: Baler with conveyor, maintenance platform, access ladder, two wire feed stations for 5 wire coils each (without wire), and bale chute. Notes: Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.