Balinirni stroj 200 t z vodoravno vezavo

MACPRESSE EUROPA S.R.L. 112

Technical Data of the Baler:

Manufacturer: MACPRESSE EUROPA S.R.L.
Model: 112
Year of manufacture: 2002, partially overhauled in December 2025
Operating hours: 44,590 hours (as of December 2025)
Main press force: 200 t
Specific press force: 16.5 kg/cm²
Gbjdpsx Dnb Ujfx Agyoi
Feed hopper dimensions: 2,000 x 1,020 mm
Filling volume: 2.65 m³
Theoretical throughput: 795 m³/hour
Bale dimensions: 1,100 x 1,100 mm, length variable
Drive power: 2 x 75 kW
Tying: 5-fold horizontal, fully automatic
Throughput (MSW): approx. 48 to 54 t/hour, depending on material
Hydraulic oil tank volume: 3,100 L
Machine weight (press): approx. 50.8 t

Scope of delivery:
• 1 MACPRESSE baler, model 111A
• 1 operating manual with CE declaration, electrical and hydraulic schematic diagrams

Notes:
The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced:

• Hydraulic oil tank fully drained and cleaned
• Oil and air filters replaced
• New hydraulic oil filled
• All hydraulic hoses replaced
• Dismantling of the press ram, disassembly into individual parts, overhauling the mechanism
• Replacement of the front two main running rollers
• Replacement of the knives on the press ram
• Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal kit replaced
• Counter knife in the frame replaced
• Knife gap adjusted to approx. 3 mm
• Upper steel guide rails in the frame (left and right) replaced
• Removal of worn press floor, replacement with wear-resistant HARDOX steel floor plate
• Dismantling of the binding and twisting unit, disassembly into individual parts, overhauling the mechanism, replacement of all twisting shafts and ball bearings
• All wire rollers in the needle heads replaced
• Wire knives cleaned and readjusted, chains lubricated and tensioned
• All wire deflection rollers overhauled
• All door contact switches replaced
• Wirbulator dismantled, disassembled, and overhauled
• General maintenance work performed

Finally, the baler was subjected to a machine test in manual and automatic mode; see our video for the function test of the machine.

Complete documentation (operating manual, CE declaration, electrical/hydraulic schematic diagrams) is available. An inspection is possible by appointment. No liability is assumed for technical specifications or possible errors.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.