Delem nakup rabljenega (229)

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, stiskalna sila: 40 t, hod: 170 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 170 mm/s, širina mize: 90 mm, dolžina mize: 1.270 mm, višina mize: 850 mm, globina grla: 350 mm, razmak između stupova: 1.050 mm, kapaciteta rezervoarja za olje: 80 l, skupna dolžina: 2.150 mm, skupna širina: 1.650 mm, skupna višina: 2.300 mm, skupna masa: 3.250 kg, leto zadnje generalne obnove: 2025, Oprema: CE označba, varnostna svetlobna zapora, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hidravlična upogljalna stiskalnica – 6 osi – nadzorni sistem Delem DA-66T Rabljena hidravlična upogljalna stiskalnica Ermaksan Speed-Bend Pro 1270 x 40 CNC, letnik 2016, naprodaj na Irskem. 6-osna CNC upogljalna stiskalnica z grafičnim nadzornim sistemom Delem DA-66T, osi Y1, Y2, X, R, Z1 in Z2, orodje, laserski zaščitni sistemi. Proizvajalec: Ermaksan Model: Speed-Bend (SB) Pro 1270 x 40 Osi: 6 Letnik: 2016 Kapaciteta: 1270 mm x 40 ton Nadzorni sistem: Delem DA66T Opis Hidravlična upogljalna stiskalnica Ermaksan Speed-Bend Pro 1270 x 40 CNC, letnik 2016, je kompaktna, visokokakovostna 6-osna CNC hidravlična upogljalna stiskalnica, idealna za natančno upogibanje pločevin, proizvodne delavnice, inženirska podjetja in proizvodna okolja. Ta Ermaksan Speed-Bend Pro 1270 x 40 omogoča dolžino upogiba 1270 mm in upogibno moč 40 ton. Opremljena je z grafičnim CNC nadzornim sistemom Delem DA-66T, ki zagotavlja jasen vmesnik na dotik za natančno programiranje, izračun zaporedja upogibov, nastavitev orodja in ponovljivo proizvodno upogibanje. Stroj je v dobrem stanju. Opremljen je z zgornjim in spodnjim orodjem za upogljalno stiskalnico v evropskem slogu, laserskimi zaščitnimi sistemi, stopalko, hitro sproščljivimi sponkami za zgornje orodje in zadnjimi varnostnimi vrati, kar ga naredi dobro opremljeno rabljeno upogljalno stiskalnico, ki je pripravljena za takojšnji pregled in uporabo v proizvodnji. To je odlična priložnost za nakup novejšega, kompaktnega CNC upogljalnega stroja Ermaksan s prijetno 6-osno konfiguracijo, idealnega za podjetja, ki iščejo zanesljivo rabljeno hidravlično upogljalno stiskalnico na Irskem, v Združenem kraljestvu ali Evropi. Ključne značilnosti Proizvajalec: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Letnik: 2016 Tip: CNC hidravlična upogljalna stiskalnica Dolžina upogiba: 1270 mm Upogibna moč: 40 ton Konfiguracija osi: 6 osi CNC nadzorovane osi: Y1, Y2, X, R, Z1 in Z2 Nadzorni sistem: Delem DA-66T, grafični CNC nadzorni sistem Stanje: Dobro stanje Orodje: Komplet s zgornjim in spodnjim orodjem v evropskem slogu Varnost: Laserski zaščitni sistemi in zadnja varnostna vrata Sponke: Hitro sproščljive sponke za zgornje orodje Vključuje: Stopalka Primerno za: Obrabo pločevine, natančno upogibanje, splošno inženirstvo, podizvajalsko obdelavo in proizvodno upogibanje Bdjdpfxszdak Ao Aiqeh Tehnične specifikacije – model SB PRO 1270-40 Model: SB PRO 1270-40 Dolžina upogiba: 1270 mm Upogibna moč: 40 ton Razdalja med stebri: 1050 mm Hitrost hitrega gibanja osi Y: 140 mm/s Delovna hitrost osi Y: 10 mm/s Hitrost povratnega gibanja osi Y: 170 mm/s Gib osi X: 500 mm Hitrost osi X: 500 mm/s Gib osi R: 250 mm Hitrost osi R: 350 mm/s Hitrost giba osi Z1 / Z2: 1000 mm/s Bloki za vodilo zadnje letve: 2 Količina olja: 80 litrov Moč motorja: 5,5 kW Gib: 170 mm Razdalja med zgornjim in spodnjim orodjem: 387 mm Globina grla: 350 mm Višina mize: 850 mm Širina mize: 90 mm Dimenzije stroja: 2150 x 1650 x 2300 mm Teža stroja: 3250 kg Standardna / vključena oprema Ta rabljena upogljalna stiskalnica Ermaksan Speed-Bend Pro je opremljena z: 6 CNC osi: Y1, Y2, X, R, Z1 in Z2 Grafični CNC nadzorni sistem Delem DA-66T Zgornje orodje za upogljalno stiskalnico v evropskem slogu Spodnje orodje za upogljalno stiskalnico v evropskem slogu Laserski varnostni sistemi Stopalka Hitro sproščljive sponke za zgornje orodje Zadnja varnostna vrata Bloki za vodilo zadnje letve Podporni roki za pločevino Opombe: *Tehnične spe

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, BAYKAL CNC Press Brake Model: APHS-C 125040 Unused SN: 28542 Year: 09/2021 Equipped as follows: - DELEM control system DA-58T, 2D graphic with touchscreen - CNC-controlled backgauge with ball screws, X-axis 750 mm + 250 mm, R-axis = 130 mm - Manual table crowning - AKAS laser safety system - Safety covers on the sides and rear - 2 front support arms with linear guides - Upper system tool clamping - Lower system tool clamping Bdedpfjtz Azdsx Aiqjh - Technical documentation - CE compliant - Colors: * RAL 7015 – Slate Grey * RAL 7035 – Light Grey * RAL 3003 – Ruby Red Technical Data: - Press force: 40 t - Working length: 1,250 mm - Motor power: 4 kW - Oil tank capacity: 80 l - Approach speed: 160 mm/sec - Working speed: 10 mm/sec - Return speed: 130 mm/sec - Bending length: 1,250 mm - Frame clearance: 1,070 mm - Frame depth: 1,470 mm - Table height: 800 mm - Machine height: 2,250 mm - Installation height: 455 mm - Stroke: 215 mm - Table width: 60 mm - Throat depth: 410 mm - Weight: 3,300 kg Errors and prior sale excepted!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, številka stroja/vozila: 621307509, model krmilnika: Delem DAC-350, delovna širina: 3.080 mm, najv. debelina pločevine: 10 mm, skupna masa: 11.500 kg, Brez minimalne cene – zagotovljen nakup po najvišji ponudbi! TEHNIČNE PODROBNOSTI Maksimalna debelina pločevine: 10 mm Maksimalna delovna širina: 3.080 mm Hitrost rezanja: 20 mm/min PODROBNOSTI O STROJU Pogon: CNC Nadzorovalni sistem: Delem DAC-350 Vrsta pogona: Hidravlični Priključna moč: 30 kW Dimenzije in teža Dimenzije (D x Š x V): 4.980 x 2.400 x 2.200 mm Teža: 11.500 kg Transportni paketi: 1 kos OPREMA Električni omejevalnik Bedpfxjz Ebcfo Aiqedh Pnevmatska opora za pločevino Fiksna zaščita prstov z zaščito, ki se dvigne Miza z ležaji Motorizirana nastavitev kota Motorizirana nastavitev rezne špaltine Dokumentacija

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, stiskalna sila: 175 t, hod: 275 mm, obratovalna hitrost: 12 mm/s, hitrost vzvratne vožnje: 190 mm/s, dolžina mize: 3.100 mm, višina mize: 900 mm, globina grla: 410 mm, tabela razdalj do bata: 550 mm, razmak između stupova: 2.600 mm, kapaciteta rezervoarja za olje: 300 l, skupna dolžina: 5.025 mm, skupna širina: 2.150 mm, skupna višina: 2.680 mm, skupna masa: 9.086 kg, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC hidravlična upogljalna stiskalnica 2022 Ermaksan Speed-Bend PRO 3100x175 CNC hidravlična upogljalna stiskalnica v odličnem stanju. 175 ton x 3100 mm, 6 osi, Delem DA66TX, CNC upogib, laserski zaščitni elementi, obsežen komplet orodij je vključen. Proizvajalec stroja: Ermaksan Model: Speed Bend Pro 3100 x 175T Vrsta stroja: 6-osna CNC hidravlična upogljalna stiskalnica Kapaciteta: 3100 x 175T Leto: 2022 Krmilnik: Delem DA66TX Stanje: Odlično Opis Ermaksan Speed-Bend Pro 6-osna CNC hidravlična upogljalna stiskalnica z nadzorom Delem DA66TX. Ta 2022 Ermaksan Speed-Bend PRO 3100x175 CNC hidravlična upogljalna stiskalnica je visokokakovosten, sodoben stroj v odličnem stanju in je zdaj na voljo. To je 6-osni stroj z osmi Y1, Y2, X, R, Z1 in Z2, opremljen z CNC nadzorom Delem DA66TX, pnevmatičnim vpenjalom zgornjega orodja, CNC upogibom, laserskimi zaščitnimi elementi, stopalko tipa "wanderer" in kompletnim naborom zgornjih in spodnjih orodij. Idealna za obdelavo pločevin, natančno upogibanje, obdelavo nerjavečega jekla, obdelavo ogljikovega jekla, upogibanje aluminija, kmetijsko proizvodnjo, splošno strojno in proizvodno delavnico. Ključne lastnosti 2022 Ermaksan Speed-Bend PRO 3100x175 175 ton upogibne kapacitete 3100 mm dolžine upogiba 6-osna CNC hidravlična upogljalna stiskalnica Osi: Y1, Y2, X, R, Z1 & Z2 CNC nadzor Delem DA66TX Pnevmatično vpenjalo zgornjega orodja Komplet zgornjih in spodnjih orodij CNC / motoriziran upogib Laserski zaščitni elementi Stopalka tipa "wanderer" Odlično stanje Odličen stroj za upogibanje v proizvodnji in obdelavi Kapaciteta in osnovni podatki stroja Proizvajalec: Ermaksan Model: Speed-Bend PRO 3100x175 Leto: 2022 Vrsta stroja: CNC hidravlična upogljalna stiskalnica Dolžina upogiba: 3100 mm Upogibna sila: 175 ton Razdalja med stebri: 2600 mm Osi: Y1, Y2, X, R, Z1, Z2 Upogib: Motoriziran / CNC upogib Bloki vodila zadnje omejevalne plošče: 2 Hitrosti in pomik osi Hitra hitrost osi Y: 180 mm/s Delovna hitrost osi Y: 12 mm/s Hitrost vrnitve osi Y: 190 mm/s Pomik osi X: 800 mm Hitrost osi X: 500 mm/s Pomik osi R: 250 mm Hitrost osi R: 350 mm/s Hitrost pomika osi Z1 / Z2: 1000 mm/s Hod, višina in okvir Hod: 275 mm Višina: 550 mm Globina odprtine: 410 mm Višina mize: 900 mm Širina mize: 90 mm Moč, velikost in teža Kapaciteta olja: 300 litrov Moč motorja: 15 kW Približna dolžina: 5025 mm Približna višina: 2680 mm Približna širina: 2150 mm Približna teža: 9086 kg CNC nadzor Delem DA66TX Funkcije nadzora 2D grafično programiranje na dotik Visoko ločljiv barvni zaslon TFT Samodejni izračun zaporedja upogibov Odkrivanje trkov 3D nastavitev stroja z več orodjarnimi postajami USB / vmesnik za periferne naprave Pomnilnik za izdelke in orodja Podpora za programsko opremo Profile-TL za delo brez povezave Enostavno upravljanje z dotikom Delem Platforma DA-66T podjetja Delem je po navedbah podjetja Delem 2D grafični nadzor upogljalne stiskalnice s samodejnim izračunom zaporedja upogibov, odkrivanjem trkov, popolno 3D nastavitvijo stroja, USB vmesnikom, 17-palčnim barvnim zaslonom TFT visoke ločljivosti in podporo za programsko opremo Profile-TL za delo brez povezave. Vključena oprema Pnevmatično vpenjalo zgornjega orodja Številna zgornja orodja Številna spodnja orodja CNC upogib Laserski zaščitni elementi Stopalka tipa "wanderer" 6-osni CNC sistem za zadnjo omejevalno ploščo Nadzor Delem DA66TX Bdjdpfx Aez Dn Hueiqjh Tipične aplikacije Obdelava pločevin CNC upogibanje Upogib ogljikovega jekla Upog

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Takoj na voljo, ne gre za stečajno prodajo: Stroj za upogibanje pločevin Trumpf Truma Bend V 50 Letnik 2001 Krmilni sistem Delem Upogibna sila 50 ton Dolžina upogiba 1200 mm Delovna širina 1280 mm Hod 215 mm Popolna zaščita Upravljanje s stopalom Teža 6 ton Bjdpfxez Hu Hms Aiqedh Cena: 8.750 EUR + DDV, ob prevzemu na lokaciji

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, številka stroja/vozila: 8071, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, hod: 400 mm, skupna masa: 21.000 kg, proizvajalec krmilnikov: DELEM, model krmilnika: DA65, delovna širina: 3.000 mm, upogibna sila (maks.): 100 t, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, število osi: 8, tip kronanja: CNC krmiljen, vrsta aktuacije: hidravlični, Oprema: CE označba, dokumentacija / priročnik, zaščita prstov, Uporabljena strojna upogljalnica Warcom Dinamica 3000 x 100 ton, leto izdelave 2008, industrijski stroj, zasnovan za kompleksno upogibanje velikih formatov, zahvaljujoč svoji napredni konfiguraciji z 8 nadzorovanimi zadnjimi osmi (Y1-Y2-Z1 – Z2 – X1 – X2 – R – X). CNC DELEM DA65. S priporočeno dolžino upogiba 3000 mm in upogibno silo 100 ton je ta stroj idealen za uporabo pri srednje in visoko obremenjenih aplikacijah, saj je sposoben obdelovati kompleksne geometrije in strukturne komponente. Glavne značilnosti: Upogibna sila: 100 ton. Dolžina upogiba: 3000 mm. 8 nadzorovanih zadnjih osi: Y1, Y2, Z1, Z2, X1, X2, R, X → večja prilagodljivost za kompleksno upogibanje. Model: Opera. Robustna in zanesljiva konstrukcija. Leto izdelave: 2004. Zelo vsestranska strojna upogljalnica, primerna za kovinarske delavnice in proizvodna podjetja, ki potrebujejo moč, natančnost in večosno upravljanje v eni rešitvi. Bodpfxozqtb Te Aiqsdh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Takoj na voljo na lokaciji: Hidravlična ploščna škarja Baykal Tip MGH 3100/10 Letnik izdelave 2005 Programirljiv nadzor Delem Dac 310 Dolžina reza 3060 mm Debelina materiala 10 mm Krmiljeni zadnji opora 1000 mm Pogon 22 kW Število udarcev/min 12 Bdjdsz Hu Ecjpfx Aiqsh Teža 9600 kg Dimenzije 5000/2600/2000 mm Cena: 9.500 EUR + DDV, na lokaciji.

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to find out more! This offer concerns the basic version of the machine. All optional equipment and their prices can be found on our website. Hydraulic Press Brake PBO-3117-CNC Delem DA-66T Technical specifications - Rated press force: 1,750 kN - Maximum bending length: 3,100 mm - Throat depth (distance between tool and rear wall): 410 mm - Maximum stroke of the bending beam: 310 mm - Maximum open height: 465 mm - Distance between uprights: 2,600 mm - Maximum backgauge travel: 1,000 mm - Motor power: 15.0 kW - Length: 3,300 mm - Width: 1,650 mm - Height: 2,975 mm - Weight: 8,850 kg Tooling - Automatic servo-driven stops on linear guides: 2 pcs - Front sheet supports: 2 pcs - Backgauge travel (X-axis): servo-driven - Beam positioning (Y-axis): independent servo control of Y1 and Y2 axes - Punch clamping system: AMADA-type quick-change Delem DA-66T Control - Automatic control of 8 axes increases bending efficiency Bedorp Dt Tepfx Aiqsdh - Can store 500 programs with 25 steps and 99 repetitions each - Memory for up to 30 punches/dies - 2D/3D programming modes - 17″ TFT touchscreen - Windows-based control software (programming on PC possible) - Crowning control via CNC - Advanced Delem control system - USB port - Provisions for angle sensor connection Professional Support We ensure continuous contact with our customers. That's why, when purchasing a machine, we provide a support package for professional assistance from Otinus technicians. Visit and Test Our Machines Take part in an exclusive presentation, where a qualified Otinus technician demonstrates the full functionality of the machine. You may provide technical drawings and sample material. Manufactured in Turkey Scope of Supply: A 2-day operator training & commissioning - Day 1 (up to 8 hours) – commissioning and control system training - Day 2 (up to 8 hours) – independent operation under supervision of our technician, with possibility to program specific parts Telephone consultation with a specialist - From 7:30 to 21:00 (Mon-Sat) – 8-hour package, to be used within 12 months Free rental of transport rollers and two jacks to facilitate machine installation at customer site. Rollers and jacks are supplied on request (at least 7 days before machine delivery). Terms of Cooperation - 24-month warranty period - Delivery time: approx. 6-8 weeks Not applicable if the machine is marked as available from stock. - Machine is brand new - Warranty and post-warranty service by the seller - Customer is responsible for the machine during unloading and transport on customer’s premises.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, moč: 9 kW (12,24 KM), vhodna napetost: 380 V, stiskalna sila: 100 t, hod: 300 mm, obratovalna hitrost: 9 mm/s, hitrost vzvratne vožnje: 71 mm/s, širina mize: 90 mm, višina mize: 900 mm, globina grla: 520 mm, dolžina plošče bata: 3.060 mm, tabela razdalj do bata: 500 mm, razmak između stupova: 2.620 mm, kapaciteta rezervoarja za olje: 200 l, skupna dolžina: 4.220 mm, skupna širina: 2.335 mm, skupna višina: 3.010 mm, skupna masa: 10.500 kg, leto zadnje generalne obnove: 2026, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, CNC upogibalni stroj COLLY BOMBLED PS 3000 LS 100/3 – 100 ton x 3060 mm – 8 osi – DELEM DA66W Ponujamo v prodajo ta CNC upogibalni stroj COLLY BOMBLED, in sicer zaradi posodobitve naše strojne opreme. Gre za našo lastno proizvodno napravo. Smo podjetje za obdelavo kovin, ne pa tudi prodajalec strojev. Stroj je v odličnem delovnem stanju, redno vzdrževan in glede na njegovo starost relativno malo uporabljen, saj ima naštetih le približno 220.000 upogibov. Stroj si lahko ogledate in preizkusite v naši delavnici v Franciji. GLAVNE ZNAČILNOSTI Proizvajalec: COLLY BOMBLED Model: PS 3000 LS 100/3 Leto izdelave: 2008 Serijska številka: 085049 Sila upogiba: 1000 kN / 100 ton Dolžina upogiba: 3060 mm Razdalja med stebri: 2620 mm CNC nadzor: DELEM DA66W, grafični 2D Število osi: 8 Število upogibov: približno 220.000 KONFIGURACIJA 8 OSI Y1 – Y2 X1 – X2 R1 – R2 Z1 – Z2 Motorizirana zadnja opora COLLY S3001. CNC NADZOR DELEM DA66W z grafičnim uporabniškim vmesnikom 2D. Grafično programiranje delov in zaporedij upogibanja, upravljanje osi, funkcija orodjarske škatle in vizualizacija operacij upogibanja. STANJE / VZDRŽEVANJE Bdedpfozybffsx Aiqeh Stroj je redno vzdrževan. Nedavno je bila opravljena hidravlična revizija. Kontrolo in popravila izvaja neposredno COLLY BOMBLED. Vsi pokrovi in zaščitna oprema so prisotni. Stroj je v celoti funkcionalen in takoj na voljo. Prodaja je motivirana izključno zaradi posodobitve naše strojne opreme. TEHNIČNI PODATKI Hod drsnega nosilca: 300 mm Globina upogiba: 520 mm Odprtina med mizo in drsnim nosilcem: 500 mm Širina mize: 90 mm Višina mize: 900 mm Hitrost približevanja: 100 mm/s Hitrost upogibanja: 9,2 mm/s Hitrost dviganja: 71 mm/s Moč motorja: 9 kW Indikativna zmogljivost jekla S235 po celotni dolžini, pri V = 10 x debelina: 5 mm. DIMENZIJE / TEŽA Višina: 3010 mm Širina: 2335 mm Dolžina: 4220 mm Teža: približno 10.500 kg LOKACIJA / NAKLADANJE Stroj se nahaja v naši delavnici Metal360 v Franciji. Stroj si lahko ogledate in preizkusite po predhodnem dogovoru. Objekt omogoča dvig in nakladanje stroja neposredno na tovornjak, kar olajša njegovo odpeljavo. Video posnetek delovanja in dodatne fotografije so na voljo po dogovoru. Cena: 34.900 € brez DDV Stroj je takoj na voljo.

Stanje: rabljeno, Leto izdelave: 2020, skupna dolžina: 2.450 mm, skupna širina: 1.900 mm, skupna višina: 2.140 mm, Barva: Siva Teža: 5.500 kg - Letnik proizvodnje: 2020 - Dokumentacija je na voljo: Da - CE-oznaka je prisotna: Da - CE-certifikat je prisoten: Ne - Nadzor: CNC - Znamka sistema nadzora: Delem - Vrsta sistema nadzora: DA-41s - Moč [kW]: 4,0 - Število osi [kos]: 4: Y1+Y2+X+R - Sila stiskanja [ton]: 40 - Maks. delovna širina [mm]: 2000 - Razdalja med stojali [mm]: 1800 - Izsed [mm]: 200 - Globina zadnjega opore [mm]: 750 - Maks. hod [mm]: 100 - Sistem oblikovanja: Ni - Nosilec stikala: Za hitro sprostitev - Vrsta nosilca orodja: Evropski tip - Orodja vključena: Da - Dodatne možnosti: Zaščita prstov - Transportne dimenzije: 2450 mm x 1900 mm x 2140 mm (d x š x v) - Transportna teža [kg]: 5500 kg - Transportni paketi [kos]: 2 Finančne informacije DDV: Navedena cena je brez DDV DDV/davčno olajšanje: Podjetniki lahko odbijejo DDV Bdodpozr Inwefx Aiqeh Dostava in odkup so možni kadarkoli za vse izdelke iz industrijskega področja. Lukas van Rossum

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to learn more! The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website. Hydraulic Press Brake PBO-4020-CNC Delem DA-58T Technical Specifications - Rated force: 2000 kN - Maximum bending length: 4000 mm - Depth (distance between tool and rear wall): 320 mm - Maximum ram stroke: 200 mm - Maximum opening height: 480 mm - Distance between side frames: 3200 mm - Maximum backgauge travel: 600 mm - Motor power: 15.0 kW - Length: 4100 mm - Width: 1800 mm - Height: 2800 mm - Weight: 13,700 kg Equipment - Front sheet supports: 2 pcs. - Backgauge adjustment (X-axis): servo drive - Ram adjustment (Y-axis): servo drive - Backgauge finger height adjustment (R-axis): manual - Punch clamping type: AMADA-style quick-release Delem DA-58T Control - Advanced operator assistance algorithms - Enhanced graphical bending operation simulation - Operator guidance - Algorithms for production process optimization - Automatic crowning Manual Crowning (optional*) This function ensures that the bent sheet maintains a consistent bending angle along its entire length. Automatic Crowning (optional*) Enables the control system to monitor and automatically adjust the crowning, ensuring optimal settings at all times. OCS – Oil Cooling System The oil cooling system guarantees stable machine performance even during prolonged operation. Professional Support We are committed to maintaining ongoing contact with our customers. That’s why we offer a package of expert support hours from Otinus technicians with every machine purchase. Come and test our machines Participate in an exclusive demonstration by a qualified Otinus technician showcasing all the machine’s capabilities. You can bring technical drawings and sample materials. Included with the machine: A two-day operator training and commissioning - Day 1 (up to 8 hours): Commissioning and control system training - Day 2 (up to 8 hours): Independent work on the machine under supervision from our technician, including programming of specific parts Telephone consultation by a specialist - From 7:30 to 21:00 (Mon–Sat) – an 8-hour package to be used within 12 months Free loan of transport rollers and two jacks for easier installation at the customer’s site. Rollers and jacks are provided upon prior request (at least 7 days before machine delivery). Terms of collaboration - Warranty period: 24 months Bdsdpfx Astizayjiqsh - Delivery time: approx. 6–8 weeks This does not apply if the machine is marked as available from stock. - The machine is brand new - Seller warranty and post-warranty service - The customer is responsible for the machine during unloading and transport on their premises.

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call us to find out more! This offer concerns the standard version of the machine. All optional equipment and their prices can be found on our website. Hydraulic Press Brake PBO-4016-CNC Delem DA-58T Technical Specifications - Maximum bending thickness (S235): up to 8.0 mm - Nominal pressing force: 1600 kN - Maximum bending length: 4000 mm - Throat depth (distance between tooling and back panel): 320 mm - Maximum ram stroke: 180 mm - Maximum open height: 455 mm - Distance between frames: 3200 mm - Maximum backgauge travel: 600 mm - Motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10,700 kg Tooling - Front sheet supports: 2 pcs. - Backgauge movement (X-axis): Servo drive - Ram movement (Y-axis): Servo drive - Backgauge finger height adjustment (R-axis): Manual - Punch clamping type: Quick-change system, AMADA type Delem DA-58T Control - Advanced operator support algorithms - Enhanced graphical bending simulation - Operator guidance and prompts - Algorithms for reduced production cycle times - Automatic crowning Manual Crowning (optional*) This feature ensures the customer always achieves a consistent bending angle along the entire workpiece length. Bdodpfxjtizave Aiqjh Automatic Crowning (optional*) Allows automatic monitoring and adjustment of the crowning system by the control unit. This ensures the setting is always optimal. OCS - Oil Cooling System The oil cooling system ensures stable machine parameters even during prolonged continuous operation. Expert Support We maintain constant contact with our customers. For every machine purchase, we offer an hourly package of professional support provided by Otinus technicians. Visit and test our machines Participate in an exclusive demonstration with a qualified Otinus technician showcasing all machine functionalities. You may bring technical drawings and sample materials for testing. Included with the machine: A 2-day operator training and machine commissioning - Day 1 (up to 8 hours) – Commissioning and control system training. - Day 2 (up to 8 hours) – Independent operation under the supervision of our technician, including the option to program specific parts. Telephone consultation with a specialist - 7:30 am to 9:00 pm (Mon–Sat) – 8-hour package to be used within 12 months. Free rental of transport rollers and two jacks to facilitate machine installation at your facility. The rollers and jack must be requested at least 7 days prior to scheduled delivery. Terms of Cooperation - 24-month warranty period. - Delivery time: approx. 6–8 weeks, unless the machine is marked as available from stock. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The customer is responsible for the machine during unloading and transport on their premises.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, kapaciteta rezervoarja za olje: 150 l, Oprema: dokumentacija / priročnik, Durma AD-S 30100 CNC hidravlična upogibna stiskalnica (leto 2017) – 100 t × 3050 mm Opis: Na prodaj je vrhunska, odlično ohranjena in popolnoma delujoča CNC hidravlična upogibna stiskalnica Durma AD-S 30100, letnik 2017. Stroj je trenutno v proizvodnji, redno servisiran in takoj pripravljen za uporabo. Tehnične specifikacije (po tipski ploščici): - Leto izdelave: 2017 - Moč upogiba: 100 ton - Dolžina upogiba: 3050 mm - Dimenzije stroja (D × Š × V): 4500 mm × 1900 mm × 2900 mm - Masa stroja: 8500 kg - Količina hidravličnega olja: 150 litrov Bedpezd U Tdefx Aiqsdh - Obratovalne ure: [10051] h Oprema in značilnosti: - CNC krmiljenje: sodoben grafični upravljalnik z velikim zaslonom na dotik (Delem / Durma) na zložljivem konzolu, z 2D/3D simulacijo upogibanja. - Krmiljene osi: Y1, Y2, X, R osi, CNC krmiljene. - Kompenzacija upogiba: CNC nadzorovan samodejni sistem za kompenzacijo krivljenja (crowning), ki zagotavlja popolnoma enakomerne upogibne kote po celotni dolžini. - Varnost: tovarniški, vrhunski laserski zaščitni sistem za roke in prste v delovnem območju (CE skladnost). - Orodje: vključen zgornji upogibni nož (udarec) in spodnji več-V matricni sistem, kot je prikazano na slikah. Stroj je možno po predhodnem dogovoru ogledati v delovanju in preizkusiti. Demontaža in prevoz sta odgovornost kupca. Cena: 55.000 EUR (brez DDV) Lokacija: [mesto / Madžarska]

Stanje: dober (rabljeno), Leto izdelave: 2014, stiskalna sila: 100 t, dolžina mize: 3.050 mm, razmak između stupova: 2.550 mm, skupna masa: 7.700 kg, Moč upogiba: 100 t Dolžina upogiba: 3050 mm Razdalja med stoji: 2550 mm Skupna poraba moči: 20 kW Masa stroja, približno: 7.700 kg Bodpfxeztakge Aiqsdh Dodatna oprema/oprema: - Svetlobna pregrada pred strojem - Držalo orodja AMADA s hitrim vpenjalnim sistemom - Orodja - 2 kosa opornih prstov - Nadzorni sistem DELEM DA 60 touch - Nožni stikalo - Stranska zaščitna vrata - Delovni čas: 2.948 ur - 6 osi: Y1, Y2, X, R, Z1, Z2

Stanje: novo, Leto izdelave: 2024, Many of our machines are available from stock. Call now to find out more! The offer applies to the basic version of the machine. All optional equipment and their prices can be found on our website. Hydraulic Press Brake PBO-3117-CNC Delem DA-69T Technical Specifications - Nominal press force: 1750 kN - Maximum bending length: 3100 mm - Throat depth (distance between tool and rear frame): 510 mm - Maximum ram stroke: 410 mm - Maximum open height: 615 mm - Distance between uprights: 2600 mm - Maximum backgauge travel: 600 mm - Motor power: 15.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 3400 mm - Weight: 10,300 kg Tooling - Automatic servo-driven backstops on linear guides: 2 pcs. - Front support arms: 2 pcs. - Backgauge distance adjustment (X-axis): servo drive - Ram adjustment (Y-axis): independent servo control of Y1 and Y2 axes - Tool clamping system: AMADA-type quick release Delem DA-69T Control - Touchscreen module for 2D and 3D graphical programming - 3D visualisation for simulation and processing - High-resolution 17'' TFT colour display - Full Windows operating system - Compatible with Delem Modusys system (modular scalability and adaptability) - External USB port - Extensive user support in a multitasking environment - Sensor-assisted bending via parameter setting menu - Profile-T3D offline software Professional support We ensure ongoing communication with our customers. Therefore, when you purchase a machine, we include a support package for professional assistance by Otinus technicians. Come and test our machines Take part in an exclusive demonstration with a qualified Otinus technician showcasing the machine's full functionality. You may bring your technical drawings and sample materials. Made in Turkey Machine scope of delivery includes: 2-day operator training and commissioning - Day 1 (up to 8 hours) – commissioning and control training - Day 2 (up to 8 hours) – independent operation under our technician's supervision, with the option to program specific parts Telephone support by a specialist Bdjdpfx Aisrp Dwasqoh - From 7:30 to 21:00 (Mon-Sat) – an 8-hour package to be used within 12 months Free rental of transport rollers and two jacks for easier positioning of the machine at the customer's site. Rollers and jacks are provided upon prior request (at least 7 days before machine delivery). Terms of cooperation - 24-month warranty period - Delivery time: approx. 1–2 weeks Not applicable if the machine is marked as available from stock - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer is responsible for the machine during unloading and internal transport at their premises.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: P773, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, stiskalna sila: 30 t, hod: 165 mm, obratovalna hitrost: 250 mm/s, hitrost vzvratne vožnje: 160 mm/s, dolžina mize: 1.020 mm, globina grla: 255 mm, tabela razdalj do bata: 350 mm, razmak između stupova: 850 mm, kapaciteta rezervoarja za olje: 90 l, skupna masa: 3.800 kg, Oprema: CE označba, dokumentacija / priročnik, varnostna svetlobna zapora, Hitra, učinkovita, tiha! Idealna za majhne dele! Enovaljni model kakovostne strojne upogljalke, okrajšano EQPB, predstavlja najmanjši model strojne upogljalke Placke. To je zelo hitra, robustna in tiha naprava, ki je bila posebej zasnovana za proizvodnjo majhnih delov. Celotna proizvodnja, od hidravličnega cilindra do konstrukcije omarice za nadzorno ploščo, poteka v lastnih prostorih. Z uporabo najsodobnejše tehnologije, skupaj z dolgoletnimi izkušnjami na področju tehnologije oblikovanja, serija EQPB omogoča upogibanje na visoki ravni. Že serijska osnovna različica predstavlja popolnoma funkcionalno strojno upogljalko. Zahvaljujoč tej kombinaciji varnosti, zanesljivosti in učinkovitosti, skupaj s preprosto uporabo, lahko izpolnimo tudi najvišje zahteve in zagotovimo visoko natančnost pri postopku upogibanja. Sila upogibanja: 300 kN (30 t) Dolžina upogibanja: 1.020 mm Prostor med stojali: 850 mm Namestitvena višina: 350 mm Izložek: 255 mm Hod batnice: 165 mm Višina spodnje plošče nad tlemi: 947 mm Hitrost hitrega premika: maks. 250 mm/s Hitrost upogibanja: maks. 9,8 mm/s Hitrost povratnega gibanja: maks. 160 mm/s Natančnost pozicioniranja batnice: ± 0,01 mm Moč motorja: 3,0 kW Količina rezervoarja za hidravlično olje: 90 l Napetost: 400 V / 3 f / 50 Hz Masa stroja: pribl. 3,8 t Opis: > Telo stroja Jeklo S 355 N, konstrukcija na podlagi FEM Torzijsko trdna varjena konstrukcija, samostojna 2-komponentni strukturni lak, RAL 7004 / 7016 > Hidravlika in zgornja plošča Proporcionalni ventil za nadzor Tih notranji zobni črpalke Valjčni vodnik, Heidenhainova merilna lestvica > Držalo orodja Zgornje: WILA hidravlično, NSCL-II-HC Spodnje: ozka miza, enojni V (13 × 20) Korekcija Y1/Y2, sedeče ali stoječe > CNC zadnji opora Os X 950 mm, 800 mm/s, ± 0,01 mm Os R 215 mm, 150 mm/s, ± 0,01 mm Os Z ročna, 2 oporni prsti > Nadzorna plošča Delem DA 66S 24" zaslon na dotik na vrtljivem ročnem naslonu 2D programiranje, 3D vizualizacija Uvoz DXF, tandem obratovanje > Varnost in učinkovitost V skladu s standardom CE, varnostna programirljiva logična enota (PLC) Pilz Laserska varnostna pregrada TFS, spremljajoča eco-MODE, avtomatski sistem vklop/izklop Bedpfx Aisz Hnudjqsdh

Stanje: rabljeno, Leto izdelave: 2019, skupna dolžina: 3.750 mm, skupna širina: 1.900 mm, skupna višina: 2.900 mm, Barva: Kremna Teža: 12.620 kg Cena: Na zahtevo – Posebnosti: – Opis: Napaka na stroju. Osi ni mogoče referencirati. Potrebno je popravilo. – Letnik: 2019 – Dokumentacija na voljo: Ne – CE-oznaka: Da – CE-certifikat: Ne – Serijska številka: 73431915241 – Nadzor: CNC – Znamka sistema nadzora: Delem – Tip sistema nadzora: DA-66T – Moč [kW]: 22,0 – Število osi [kos]: 6: Y1+Y2+X+R+Z1+Z2 – Sila stiskanja [ton]: 220 – Največja delovna širina [mm]: 3050 – Razdalja med stojali [mm]: 2500 – Največji hod [mm]: 265 – Sistem oblikovanja: CNC-nadzorovan – Nosilec stiskalnega valja: Hidravlični – Tip nosilca orodja: WILA-standard – Orodja vključena: Da – Možnosti: Zaščita za prste, sistem merjenja kota – Dimenzije za transport: 3750 mm x 1900 mm x 2900 mm (d x š x v) – Teža za transport [kg]: 12620 kg – Paketi za transport [kos]: 1 Finančne informacije Bdjdpszzb I Aefx Aiqsh Davek na dodano vrednost: Navedena cena je brez davka na dodano vrednost. Davek na dodano vrednost/davčna obravnava marže: Podjetja lahko odštejejo davek na dodano vrednost. Dobava in prevzem staro za novo je mogoč kadarkoli za vse izdelke iz industrijskega sektorja. Lukas van Rossum

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 800 h, vrsta upravljanja: NC krmiljenje, proizvajalec krmilnikov: Delem, model krmilnika: DAC-362, delovna širina: 4.050 mm, najv. debelina pločevine: 10 mm, Delem DAC-362, numerično upravljanje (NC) programirljiv zadnji omejevalnik avtomatska nastavitev razmika med rezom avtomatska nastavitev kota reza Stroj ima samo 800 delovnih ur. Tehnični podatki: Bdsdpfx Ajzkty Ajiqoh dolžina reza / maks. dolžina reza 4050 mm zmogljivost reza / debelina reza 10 mm previs 210 mm zadnji omejevalnik 1000 mm moč pogonskega motorja 15 kW teža stroja, pribl. 18000 kg Tehnični podatki, dodatna oprema in opis stroja so zgolj informativni in niso zavezujoči.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, številka stroja/vozila: 1905223, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.313 h, moč: 11 kW (14,96 KM), stiskalna sila: 135 t, hod: 265 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 210 mm/s, globina grla: 410 mm, Oprema: CE označba, varnostna svetlobna zapora, MVD upogljalni stroj v odličnem stanju. Uporabljen zelo malo, le 13.022 upogibov. 3100 mm / 135 t Krmilnik Delem 58T Bodpfxszm S Tas Aiqedh Zadnji oporni sistem X+R CNC sistem za nastavitev upogiba Wila Zaščita prstov DSP

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer! First warranty inspection completely free of charge: Special offer only for customers who have participated in a demonstration prior to purchase – in the Otinus showroom in Bydgoszcz. Some of our machines are available FROM STOCK. Hydraulic Press Brake "PBO-2106-PRO DA-69T" Technical Specifications - Nominal pressing force: 600 kN - Motor power: 5.5 kW - Approach speed: 150 mm/s - Bending speed: 10 mm/s - Return speed: 130 mm/s - Weight: 5,400 kg - Oil tank capacity: 140 l - Maximum length of bent sheet: 2,100 mm - Distance between beams: 1,600 mm - Beam width: 1,580 mm - Table height: 880 mm - Maximum daylight opening: 475 mm - Maximum stroke of movable beam: 210 mm - Table width: 60 mm - Throat depth (insertion depth): 410 mm Tooling - Automatic servo-driven backgauges on linear guides: 2 pcs - Front sheet supports: 2 pcs - Backgauge distance adjustment (X-axis): electric motor - Beam positioning (Y-axis): independent control of Y1 and Y2 axes via servomotor - Punch mounting type: fast clamping (AMADA type) Control unit "Delem DA-69T" - Automatic control of 8 axes increases bending efficiency. - Can store 500 programs with 25 steps and 99 repetitions each. - Up to 30 punches/dies can be stored. - 2D/3D programming mode control. - 17-inch TFT touch screen. - Windows-based controller software (possibility to create programs on a computer). - Bending compensation controlled by the CNC. - Comprehensive Delem controller design. - USB port for device connection. - Connection area for angle sensor. - Controller and sensors protect each axis against collision. High-Quality Components - German brand hydraulic valve – Rexroth - Electrical system components by Schneider Bdsdpfx Aisvwmgtoqeh - Safety circuit elements by Omron and Schneider Safety The machine is supplied with a CE Declaration of Conformity. Financing If you are interested in financing Otinus machines, we are happy to assist you with your financing application. We also encourage you to use our advisory services. We cooperate with various banks to find the leasing, loan, or credit offer that best matches your needs. The following services are included in the machine price: A 2-day training session and machine installation - First day, up to 8 hours: installation and training on the control unit. - Second day, up to 8 hours: independent work on the machine under our technician's supervision → possibility to program specific details to be executed by the customer. Phone support from an Otinus specialist From 7:30 to 21:00 (Mon-Sat) – 8-hour package (to be used within 12 months) Terms of Cooperation 24-month warranty period. Preparation and lead time: approx. 6–8 weeks. Not applicable if the machine is marked as "available from stock". The machine is brand new. Warranty and post-warranty service provided by the seller. The customer assumes responsibility for the machine once it is unloaded and moved on their company premises.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free of Charge: Special offer valid only for customers who participated in a demonstration prior to purchase – at the Otinus machine showroom in Bydgoszcz. Some of our machines are AVAILABLE FROM STOCK. Hydraulic Press Brake “PBO-4124-PRO DA-66T” Technical Specifications - Nominal Press Force: 2,400 kN - Motor Power: 22 kW - Approach Speed: 150 mm/s - Bending Speed: 10 mm/s - Return Speed: 100 mm/s - Weight: 14,000 kg - Oil Tank: 210 l - Maximum Bending Length: 4,100 mm - Distance Between Uprights: 4,100 mm - Bed Width: 3,550 mm - Table Height: 1,610 mm - Maximum Opening Height: 530 mm - Maximum Stroke of the Movable Beam: 260 mm - Table Width: 90 mm - Throat Depth: 410 mm Equipment - Automatic servo-driven back gauges on linear guides: 2 pcs. - Front supports: 2 pcs. - Backgauge travel adjustment (X-axis): electric motor - Beam adjustment (Y-axis): independent control of Y1 and Y2 axes by servo drive - Tool clamping type: quick-change AMADA-type system Control Unit “Delem DA-66T” - Graphical programming module with 2D and 3D touch screen - 3D visualization for simulation and processing - High-resolution 17” TFT color display - Full Windows operating system - Compatible with “Delem Modusys” system (modular scalability and adaptability) - External USB port - Detailed user assistance in a multitasking environment - Bending operations using sensors, including a parameter adjustment menu - Offline Profile-T3D software High-Quality Components - German branded hydraulic valve: Rexroth - Electrical components by Schneider - Safety circuit elements by Omron and Schneider Bedpovwmkfofx Aiqjdh Specialist Support We ensure to stay in continuous contact with our customers. For this reason, each machine sold comes with an hourly package of Otinus specialist assistance. As part of the service, our technician can: - Determine bending steps for complex parts - Advise on material and tool selection - Assist in selecting operating parameters for various materials. Transport We offer free loading of purchased machines and support with transport organization. The following services are included in the machine price: A 3-day training and machine installation session - Day 1 up to 8 hours: installation and training on the control unit - Day 2 up to 8 hours: independent operation of the machine under supervision of our technician → opportunity to program specific parts required by the customer. Telephone support from an Otinus specialist From 7:30 to 21:00 (Mon-Sat) – 8-hour package (to be used within 12 months) Terms of Collaboration - 24-month warranty period - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer assumes responsibility for the machine once it is unloaded and transported on their premises.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free: This special offer is available only to customers who have attended a demonstration prior to purchase – at the Otinus machine showroom in Bydgoszcz. Some of our machines are AVAILABLE FROM STOCK. Hydraulic Press Brake “PBO-3112-PRO DA-69T” Technical Specifications: - Nominal Press Force: 1,200 kN - Motor Power: 11 kW - Approach Speed: 160 mm/s - Bending Speed: 10 mm/s - Return Speed: 130 mm/s - Weight: 8,400 kg - Oil Tank Capacity: 140 l - Maximum Bending Length: 3,100 mm - Distance Between Uprights: 2,550 mm - Beam Width: 1,590 mm - Table Height: 880 mm - Maximum Opening Height: 540 mm - Maximum Stroke of Moving Beam: 260 mm - Table Width: 60 mm - Throat Depth: 410 mm Tooling: - 2 automatic servo-driven back gauges on linear guides - 2 front sheet supports - Back gauge distance adjustment (X-axis): electric motor - Beam adjustment (Y-axis): independent control of axes Y1 and Y2 via servo drive - Punch clamping type: quick-change AMADA-style Bdedpfxjvwmh Do Aiqsh Controller “Delem DA-66T” - Graphical programming module with 2D and 3D touch screen interface - 3D visualization for simulation and processing - High-resolution 17” TFT color display - Full Windows-based operating system - Compatibility with “Delem Modusys” (modular scalability and adaptability) - External USB port - Comprehensive user support in a multitasking environment - Bending with use of sensors, including menu for parameter corrections - Offline software Profile-T3D High-Quality Components: - German brand Rexroth hydraulic valve - Electrical system components by Schneider - Safety circuit elements by Omron and Schneider Safety: The machine is delivered with carefully prepared documentation in German. The unit comes with a CE Declaration of Conformity. Financing: For customers interested in financing Otinus machines, we offer assistance in sourcing financing solutions. We also invite you to take advantage of our consulting services. We cooperate with various banks to find the best leasing, loan, or credit offer suited to your needs. The following services are included in the machine price: A 2-day training session and machine installation: - Day one, up to 8 hours: installation and training on the controller. - Day two, up to 8 hours: independent operation of the machine under the supervision of our technician → option to program specific parts as required by the customer. Telephone consultation with an Otinus specialist From 7:30 am to 9:00 pm (Mon–Sat) – 8-hour support package (to be used within 12 months) Terms of Cooperation: - 24-month warranty period. - Preparation and lead time: approx. 6–8 weeks. Not applicable if the machine is marked "available from stock". - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The customer assumes responsibility for the equipment once it has been unloaded and transported on the customer’s premises.

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First warranty inspection completely free of charge: special offer only for customers who have attended a demonstration before purchase – at the Otinus machine showroom in Bydgoszcz. Some of our machines are AVAILABLE FROM STOCK. Hydraulic Press Brake “PBO-4120-PRO DA-66T” Technical Specifications - Nominal Pressing Force: 2,000 kN - Motor Power: 18.5 kW - Approach Speed: 160 mm/s - Bending Speed: 10 mm/s - Return Speed: 110 mm/s - Weight: 12,500 kg - Oil Tank Capacity: 210 l - Maximum Length of Bent Sheet: 4,100 mm - Distance Between Beams: 3,550 mm - Beam Width: 1,600 mm - Table Height: 880 mm - Maximum Open Height: 530 mm - Max Stroke of Movable Beam: 260 mm - Table Width: 90 mm - Beam Throat Depth (Infeed Depth): 410 mm Tooling - Automatic servo-driven backgauges on linear guides: 2 units - Front supports: 2 units - Backgauge (X-axis) adjustment: Electric motor Bdsdpfxsvwmi Ie Aiqjh - Beam adjustment (Y-axis): Independent control of axes Y1 and Y2 via servo drive - Punch clamping type: quick clamping of AMADA type Control Unit "Delem DA-66T" - Graphical programming module with 2D and 3D touchscreen - 3D visualization for simulation and processing - High-resolution 17-inch TFT color display - Complete Windows operating system - Compatible with “Delem Modusys” system (modular scaling and adaptability) - External USB port - Advanced user support in a multitasking environment - Bending using sensors, including a parameter correction menu - Offline software: Profile-T3D High-Quality Components - German brand hydraulic valve Rexroth - Electrical system components by Schneider - Safety circuit elements by Omron and Schneider Safety The machine is supplied with a comprehensive German-language manual. The device is delivered with an EC Declaration of Conformity. Our technician can, as part of our service: - determine bending steps for complex details, - advise on material and tooling selection - and assist with selection of operating parameters for various materials. Financing For customers interested in financing Otinus machines, we offer our assistance with financing arrangements. We also encourage you to use our consulting services. We collaborate with various banks to find you the best leasing, credit, or loan options to suit your needs. Telephone Consultation by an Otinus Specialist From 7:30 a.m. to 9:00 p.m. (Mon-Sat) – 8-hour consultation package (to be used within 12 months) Terms of Cooperation - 24-month warranty. - Preparation and lead time: approx. 6-8 weeks. Not applicable if the machine is marked as “in stock.” - The machine is brand new. - Warranty and post-warranty service by the seller. - The customer is responsible for the machine once it is unloaded and transported on their business premises.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Tehnični podatki: Delovna dolžina: 8050 mm Sila stiskanja: 300 ton NC-krmiljenje: DELEM s Cybtouch 15 Krmljeni osi: Y1/Y2; X1/X2 Hod: 300 mm Razdalja med mizo in udarcem: 500 mm Izmer: 300 mm Višina mize: 875 mm Moč motorja: 26 kW CE-oznaka Stroj nameščen pod mizo Teža: približno 45,5 tone Dodatna oprema: različna orodja 6 nosilnih rok Laserski nadzor Stanje: skupno zelo dobro stanje Bdsdpfez Abn Sex Aiqeh Prodajalec ne odgovarja za napake pri pisanju ali pri prenosu podatkov. Stroj je glede na svojo starost v dobrem vizualnem in tehničnem stanju ter glede na obrabo; rabljeni stroji se prodajajo brez kakršnih koli garancij.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 9.584 h, stiskalna sila: 153 t, skupna širina: 1.700 mm, skupna višina: 2.820 mm, skupna masa: 11.000 kg, proizvajalec krmilnikov: DELEM, model krmilnika: DA-69T, največja dolžina izdelka: 3.400 mm, število osi: 4, Ta 4-osna upogibalna stiskalnica PLACKE QPB-4 150/3100 je bila izdelana leta 2001. S silo stiskanja 1500 kN in dolžino upogiba 3100 mm je primerna za različne upogibne aplikacije. Stroj ima mehanski sistem za kompenzacijo upogiba in je opremljen z obsežnim naborom orodij in dodatne opreme. Če iščete visokokakovostne upogibne zmogljivosti, razmislite o nakupu naše upogibalne stiskalnice PLACKE QPB-4 150/3100, ki je zdaj na voljo. Za več informacij nas kontaktirajte. - Nadzor/programska oprema: CNC nadzor Delem DA-69T (4 osi) - Delovni čas: 9.584,1 ure - Najvišji delovni tlak: 300 bar - Razdalja med nosilci: 2.600 mm - Hod batnice: 215 mm Bdodpozm Unysfx Aiqeh - Vgrajena višina: 525 mm - Globina potopa: 300 mm - Delovna višina (brez mize/orodij): 900 mm - Hitrost hitrega gibanja: 150 mm/s - Delovna hitrost: 0 – 9,8 mm/s - Hitrost povratnega gibanja: 100 mm/s - Varnostna hitrost: < 10 mm/s - Čas zaviranja: 0,15 s - Varnostna razdalja: 270 mm - Čas zadrževanja batnice: 0 – 9,9 s - Moč pogona: 11 kW - Skupna priključna moč: 15 kW - Napetost/frekvenca: 400 V / 50 Hz (3 PEN) - Nadzorna napetost: 24 V DC - Nazivni tok: 30 A - Varovalka: 35 A - Prostornina hidravličnega rezervoarja: 270 l - Največja delovna temperatura olja: 80 °C - Finoča oljnega filtra pri polnjenju: < 25 µm - Raven hrupa: < 70 dB(A) - Gib X-osi: 600 mm (največja hitrost: 400 mm/s, natančnost: +/- 0,02 mm, navor motorja: 1,9 Nm) - Gib R-osi: 200 mm (največja hitrost: 200 mm/s, natančnost: +/- 0,05 mm, navor motorja: 1,9 Nm) - Nastavitveni razpon osi Z1–Z2–Z3–Z4: 2400 mm (ročno nastavljanje) - Sistem za kompenzacijo upogiba: Mehanski sistem za kompenzacijo upogiba Wila (0,6 kW, CNC-nadzorovan) - Pritrdilni sistem/orodje: Wila Modufix - Delovna temperatura okolja: +5 °C do +40 °C - Vlažnost delovnega okolja: 30 % do 95 % (brez kondenzacije) - Dodatna oprema in orodja, vključena v dobavo: * Nožni stikalo * Tehnična dokumentacija (1 komplet) * Podpore za pločevino: 2x 1 m, 2x 0,5 m * Matrice (zgornja orodja): 5 × 515 mm (28°, H200); 2 × 100 mm (28°, H200); 1 × 200 mm (28°, H200); po 1x 20 mm, 30 mm, 35 mm, 40 mm (28°, H200); 2x 100 mm (28°, H200 z izrezom); 2x 255 mm * Pritisne plošče (spodnja orodja): 5 × 515 mm (12 × 30°, R = 1, H55); 6x segmentirane (12x30°, R=1, H55) [skupna širina 3 m]; 4x 515 mm; 1x 475 mm; 8x segmentirane [skupna širina 3 m]; 1x 515 mm (50x80°, R=5, H55); 1x brez specifikacije; 1x 200 mm (V=8, 30°, R=1, H55) * Podaljški za orodja: 1 × 1240 mm (H140, L410), 2 × 50 mm (H100), 4 × po meri izdelani (H100) Tehnične specifikacije Dolžina upogiba: 3100 mm