Stroji za izdelavo čepov

BERRONE OVER TEN 140

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW Fgodohlp D Nspfx Al Sjg The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: dober (rabljeno), Tilting spindle moulder, table milling machine -Spindle adjustment: height and angle -Tiltable: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm Fgodpfx Aoh Nvyzsl Sjg -Feed unit: Holz-Her, 3 rollers -Usable spindle length: 100 mm -Spindle diameter: 30 mm -Max. cutter diameter: 220 mm -Dimensions (LxWxH): 1540/1100/1520 mm -Weight: 962 kg

Stanje: novo, Leto izdelave: 2025, CASADEI PFS 520 – Surface and Thickness Planer with 520 mm Planing Width and Motorized Thickness Table Adjustment Robust steel and cast iron construction Large, ribbed surfacing tables made of cast iron, stress-relieved to prevent distortion Smooth operation due to high dead weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutterblock, precision mounted Helical gear steel infeed roller for particularly uniform and gentle feeding of wood Outfeed roller with rubber coating Large surfacing fence, tiltable from 90° to 45°, easily readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Fgjdpfx Asbxz S Hol Sjg Tersa Cutterblock System: Planer knife change in seconds When starting the machine, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection sets itself automatically, no adjustments or screws required The surfacing table is adjusted using a stable and precise parallelogram system, ensuring that the distance between the table edges and the cutterblock remains constant in any position The sturdy aluminum surfacing fence is anodized as standard, easily adjustable and provides a generous support surface Adjustable tilt from 90° to 45° is easily readable from the operator's position Auxiliary fence included as standard for safe planing, even of narrow workpieces Image shows machine with optional equipment The extraction port position remains the same for both surfacing and thickness planing No additional extraction hose or complicated repositioning around the machine is necessary Technical data: Total length of surfacing tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Fence dimensions: 1200 x 190 mm Fence tilt range: 90° – 45° Min./Max. planing height: 3 / 250 mm Cutterblock diameter/number of knives: 100 mm / 4 pcs Feed speed: 5 / 8 / 12 / 18 m/min Spindle speed: 5000 rpm Motor power: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Stanje: rabljeno, Težki stružnica Craven 2000 mm x 8000 mm Premer nad posteljo: 2000 mm Premer nad sani: 1500 mm Razdalja med konicama: 8000 mm Glavni pogon: 60 kW Fgedpfjx Hp Iwjx Al Sjg Nosilnost: 40 ton Hitrosti vretena: 2 – 152 vrt/min Podporniki Podaljšek postelje: 2000 mm

Stanje: rabljeno, številka stroja/vozila: 008116, Maks. višina obdelave: 120 mm Maks. podajalna hitrost: 25 m/min Fsdew Iddzspfx Al Sogg Število delovnih vreten: 6

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 495.000 km, moč: 537 kW (730,12 KM), vrsta goriva: dizel, velikost pnevmatike: 385/65 R 22.5, konfiguracija osi: 8x4, gorivo: dizel, kapaciteta rezervoarja za gorivo: 1.000 l, zavore: retarder, barva: modra, voznikova kabina: spalna kabina, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 8.000 kg, dovoljena osna obremenitev (os 3): 13.000 kg, Leto izdelave: 2017, Oprema: AdBlue, drugi rezervoar za gorivo, klimatska naprava, retarder, spojler, tempomat, = Additional Options and Equipment = - Leaf suspension - Roof spoiler - Refrigerator - Air suspension - Radio/CD player - Sleeper cab - Sun visor - Power take-off (PTO) = Remarks = Colour: Blue Details Manufacturer: Scania Model: R 730 8x4 Chassis number: YS2R8X40005472379 Year: 2017 Odometer: approx. 495,000 km Engine: 730 HP / EURO 6 / 16-litre diesel / V8 Transmission: Scania Retarder R4100 First axle: 8,000 kg | 385/65 R 22.5 | leaf suspension Second axle: 8,400 kg | 385/65 R 22.5 | air suspension Rear axles: 13,000 kg | 315/80 R 22.5 | air suspension | hub reduction GVW: 26,000 kg GCW: 160,000 kg Equipment 2 x 500L fuel tanks AdBlue NATO / 24 volt electrical system Warning beacon lights on roof Alcoa rims Toolbox PTO with 170L tank JOST JSK38C 3.5" fifth wheel on sliding frame Webasto auxiliary heating Cabin Multifunction steering wheel Cruise control Sun visor 2 x bed Fridge Comfort seats Storage compartments Fgsdeuu Ha Djpfx Al Sjg Radio CD Player / AUX / USB Tachograph Roof hatch = Further Information = General Information Year of manufacture: 2017 Technical Information Number of cylinders: 8 Engine displacement: 16,000 cc Payload: 160,000 kg Permissible total weight: 42,000 kg Transmission Gearbox: Scania Retarder R4100 Axle Configuration Front axle: Tyre size: 385/65 R 22.5; alloy rims; max. axle load: 8,000 kg; steered; suspension: leaf springs Middle axle: Tyre size: 385/65 R 22.5; alloy rims; lift axle; max. axle load: 8,000 kg; suspension: air suspension Rear axle 1: Tyre size: 315/80 R 22.5; twin tires; alloy rims; max. axle load: 13,000 kg; reduction: outboard planetary axles; suspension: air suspension Rear axle 2: Tyre size: 315/80 R 22.5; twin tires; alloy rims; max. axle load: 13,000 kg; reduction: outboard planetary axles; suspension: air suspension Functional Body manufacturer: Scania Condition Technical condition: very good Visual condition: very good Damages: none Financial Information Price: On request

Stanje: rabljeno, Zasukljiv agregat, širina verige 10 mm Fedpfovvku Esx Al Ssgg Lokacija skladišča: Nattheim

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), Dvostofni gorilnik Weishaupt RGL40/2-A - izvedba ZM-NR Moč 500-3450 kW: Letnik: 1998 Pretok olja 55-290 kg/h Z obstoječo armaturo Dungs DN65. Fjdpfx Ashl Inmol Sogg Pošiljka po vsem svetu je možna. Govorimo tudi rusko! Ogled je možen le po predhodnem dogovoru po telefonu! Prednost imajo ponudbe od trgovcev, podjetij ali za izvoz. Vse informacije so podane brez jamstva, z možnostjo napake in rezerviramo si pravico do sprememb. Prodajalec ne prevzema odgovornosti za tipkarske in prenosne napake. Z veseljem odkupimo vašo rabljeno kotlico ali gorilnik! Seveda uredimo tudi vsa potrebna formalna opravila. Možno je natovarjanje.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, WEINIG UNIMAT SUPER 4 Planer – German-made – Very good condition – Year of manufacture: 2004 – Operating manual (DTR) TECHNICAL SPECIFICATIONS: Planing width: 150 mm Planing height: 50 mm Spindle diameter: 40 mm Fgodjin Nrgjpfx Al Sjg Equipped with tooling Adjustable top head 1) Bottom head: 11 kW, 6000 rpm 2) Top head: 18.5 kW, 7000 rpm 3) Bottom head: 5.5 kW, 6000 rpm Feed motor: 2.2 kW Feed speed adjustable via inverter: 0-18 m/min Feed with cardan shafts Pneumatic hold-down Three hardened steel top feed rollers One rubber top feed roller Ribbed infeed table Infeed table length: 1950 mm Total power: 37 kW Central lubrication Transport dimensions: Length/Width/Height: 320x220x220 cm Weight: ~2700 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 50.000 l, Heating oil tank - storage container - diesel tank - tank system - steel tank Brand new - with 50,000 liter capacity - in accordance with EN 12285-2 - Class B (replacement for DIN 6616), above-ground, double-walled, incl. test certificate, suitable for installation in seismic zone 0 areas. The tank features two saddle supports, a manhole with dome cover and is equipped with the following fittings: 1 fill pipe with TW cap (filling cap) and dip tube, Fedpfx Aloi A Hz Ae Sjgg 1 measuring pipe with sounding rod and rod closure, 1 vent pipe with vent cap, 1 brand-new overfill prevention device with type approval (AIII), 1 ladder as well as 1 spare socket for extraction purposes, 1 optical leak detector with type approval and leak detection fluid. The tank is externally sandblasted, primed, and painted white / RAL 9016 shade (sample photo). (Other RAL colors available upon request!) L = approx. 10.70 m - D = 2.50 m - Weight approx. 9.5 t - ex works, free loaded - General information: You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Further tanks (new and used) as well as rental units also available! In addition, we buy existing tank systems and can, with certified specialist qualifications according to the Water Resources Act (§ 62 WHG), professionally empty, clean, dismantle, and remove them.