Balairka

Avermann AVOS 1410 BR5-45/80

Stanje: rabljeno, Leto izdelave: 2014, stiskalna sila: 122 t, skupna masa: 40.000 kg, pritisk: 315 letvica, Machine has been used by ourselves but is now surplus to requirements and therefore offered for sale! Gedpfx Adswa N U Do Aeip

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. Gjdpfjv T I Evjx Ad Aoip We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AR5xxxx, stiskalna sila: 28 t, skupna širina: 2.015 mm, skupna dolžina: 4.400 mm, skupna višina: 2.500 mm, skupna masa: 3.000 kg, dolžina polnilne odprtine: 1.360 mm, širina odprtine za polnjenje: 1.660 mm, moč: 5,5 kW (7,48 KM), nov hidravlični stiskalni zabojnik z zaščito pred izlivanjem, primeren za stiskanje ostankov odpadkov z vsebnostjo vlage Giedpfxoydlfxo Ad Asp

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2009, obratovalne ure: 22.029 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 16.000 kg, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2025, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours as of December 2025 Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Filling chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput (at bulk densities): – 30 kg/m³: approx. 6.0 t/hour – 50 kg/m³: approx. 10.5 t/hour – 100 kg/m³: approx. 17.5 t/hour Bale weights (at approx. 1.2 m bale length, depending on material): up to 600 kg PLC control: Siemens S7-300 Display panel: pulsotronic Machine dimensions (installed): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight baler: 16 t Gsdpfsx A U Ncjx Ad Asip Special equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk materials with small particle size • Control cabinet air conditioning • Elevated machine feet, 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following works have been performed and parts renewed: • Removal and disassembly of the press ram, maintenance of the mechanics, replacement of the following plastic wear strips and rails: o Plastic wear strips left/right underneath the press ram o Plastic wear strips left/right above the press ram o Central plastic main wear plate (support plate) under press ram • Steel guide rails (left/right, upper frame) replaced • Complete four-part floor plate replaced with wear-resistant HARDOX steel • Wire inlet rails in press floor newly welded and smoothed • Counter blade replaced (two-part, in frame) • Knife gap adjusted to approx. 2.5 mm • Removal and disassembly of the tying and twisting unit, mechanical overhaul, all groove ball bearings and axial ball bearings of twister shafts replaced, wire cutters cleaned and adjusted, chains lubricated and tensioned • Support roller in front of the twister shafts replaced • All hydraulic hoses replaced • Oil and air filters replaced • Main hydraulic cylinder checked for leaks • Hydraulic oil is only one year old, was chemically analyzed and is still in good condition, hence was not replaced, but can continue to be used • General maintenance performed Finally, the baler was tested in manual and automatic mode – see video for machine function test.

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 990 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 643 m³/h, Good day, We hereby offer, without obligation, a used baling press including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we do not assume any liability for accuracy or completeness. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions including conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be viewed in operation with material feed. Gijdpfxoymmtco Ad Aep We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: dober (rabljeno), Leto izdelave: 2012, Preddrobljenec ni del ponudbe (zgornji del). Ponujen je le spodnji del. Papirna balirka / balirni stroj PRESTO CC 40 V Proizvajalec: PRESTO GmbH & Co. KG Tip stroja: CC 40 V Serijska številka: 28074 Leto izdelave: 2012 Lastna teža: 4200 kg Maks. obratovalni tlak: 260 bar Zaščitni razred: IP55 Giedpeyrt T Tofx Ad Aep Nazivni tok: 30 A Nazivna napetost: 400 V, 50 Hz Nazivna moč: 15 kW Električni priključek: 35 A gG Tip stroja: horizontalna balirka za papir in karton.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 433 h, Funkcionalnost: popolnoma funkcionalen, Vertikalna balirna stiskalnica HSM V-Press 860 plus, letnik 2019 Tehnični podatki: Proizvajalec: HSM Tip: V-Press 860 plus Leto izdelave: 2019 Delovne ure: 433 Pritisk stiskanja: 60 t Pogonska moč: 4 kW Polnilna odprtina: 1195 x 645 mm Višina polnjenja: 1114 mm Velikost bale: pribl. 1200 x 1200 x 780 mm Teža bale: 480 kg Vezanje: ročno Teoretični prosti takt: 25 s Teoretična zmogljivost stiskanja: 12 m³/h Dimenzije: 1800 x 1253 x 2990 mm (ŠxGxV) Teža stroja: 2213 kg Obdelovani materiali: folija, papir, karton, izseki, tekstil, big bag vreče, stiropor Opomba: Stiskalnica je v zelo dobrem stanju. Prosimo, upoštevajte: Giedpfsyrngnsx Ad Aep Vsi tehnični podatki temeljijo na informacijah proizvajalca. Za morebitne napake ali netočnosti ne prevzemamo nobene odgovornosti. Ponudbe so nezavezujoče, pravica do prodaje vmes pridržana, ponudba se lahko kadarkoli umakne. Ogled je možen po predhodnem dogovoru. Prodaja poteka na lokaciji stroja, brez garancije in jamstva. Naši plačilni pogoji: 100% predplačilo.

Stanje: dober (rabljeno), Leto izdelave: 2018, obratovalne ure: 40.350 h, Funkcionalnost: popolnoma funkcionalen, Baler Presona LP 85 VH2 with Cross-Tie System, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year of Manufacture: 2018 Drive Power: 2 x 45 kW Operating Hours: 40,350 Effective Operating Hours: approx. 22,000 Prepress Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450 - 650 kg Theoretical Throughput: 1,200 m³/h Practical Throughput (at 30-100 kg/m³): 13-30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Transport Dimensions (Press): 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: approx. 27,000 kg The baler was dismantled from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical specifications are based on manufacturer’s information. We accept no liability for the above details or potential errors. Gisdpfjybaniex Ad Aep This offer is subject to change, prior sale reserved and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, prepayment only, without warranty or guarantee.