Avtomatske izsekovalne stiskalnice nakup rabljenega (156)

Stanje: rabljeno, številka stroja/vozila: 632/6, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double-roll feeder: left side Adjustable stroke: 16–40 mm Distance between columns: 330 x 300 mm Required floor space approx.: 2.10 x 1.65 x 0.75 m Iaodpocxxycefx Adkjp High-speed punching press in 3-column design, air clutch, BRUDERER precision double-roll feeder left

Stanje: rabljeno, številka stroja/vozila: 8483, Pressure: 30 t Stroke rate: 100–600 strokes/min Sheet width: 115 mm Table size: 450x450 mm Bruderer precision double roll feed: BBV 190/85 left Adjustable stroke range: 16–40 mm Column spacing (left-right): 330 mm Column spacing (front-back): 280 mm Installation height: 290 mm Feed width: 120 mm Feed length: 15–80 mm Control cabinet dimensions: 1.1 x 1.2 x 2.2 m Pass-through opening in table: 315 x 100 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t High-speed punching press in 3-column design, equipped with BRUDERER BBV 190-85 feed (left side), cooling fan, swiveling safety guard, pneumatic clutch, electric two-hand operation, and manual roll venting in the feeder. Iodocxxrdopfx Adkeap

Stanje: rabljeno, Leto izdelave: 1971, številka stroja/vozila: 1967, Pressing force: 30 t Strokes per minute: 100 - 600 spm Adjustable stroke range: 8 - 40 mm Ram adjustment: 40 mm Feed width: 198 mm Die height (min./max.): 230 - 270 mm Roller width: 110 mm Table through-hole: 310 x 80 mm Column distance (left-right): 330 mm Column distance (front-back): 280 mm Table height above floor: 990 mm Column diameter: 50 mm Voltage: 380 V Frequency: 50/60 Hz Control voltage: 24 V Iodpscxxxmjfx Adkjap Table size: 475 x 450 mm Ram diameter: 190 mm Total power requirement: 0.96 - 5.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 1.2 x 1.16 x 2.15 m Precision high-speed punching press in 3-column design, including: - Optionally available with original Bruderer precision double roller feed, pulls and pushes right and left (see photo), - Electro-hydraulic VARI drive, - Pneumatic clutch with safety valve, - Three operating modes: single stroke, single cycle, and continuous run, - Central lubrication system, - Cooling fan to maintain consistent machine temperature, - Pressure gauge for air pressure monitoring, - Stroke counter integrated into the control panel, - Separate, lockable control cabinet, - Two-hand operation and - Emergency safety stop. Newly painted, visually in good condition!

Stanje: rabljeno, Leto izdelave: 1987, številka stroja/vozila: 87 / 906, Pressure: 63 t Stroke: 8 - 80 mm Strokes per minute: 60 - 300 spm Distance between uprights: 720 mm Table area: 710 x 700 mm Table through-hole: 345 x 100 mm Lateral upright clearance: 320 x 200 mm Ram area: 500 x 400 mm Ram adjustment: 80 mm Throat depth: 350 mm Installation height: 250 / 275 mm Feed length: 220 mm Table height above floor: 1000 mm Total power requirement: 9.2 kW Machine weight approx.: 6.5 t Iaedpscxxpcofx Adksp With SZV 3-S gripper feeder designed for strip width of 270 mm, infinitely variable speed adjustment, separate control cabinet, emergency stop safety feature, selector switch for set-up, single stroke and continuous operation, adjustable stroke

Stanje: rabljeno, Leto izdelave: 1995, številka stroja/vozila: 1830977, Pressure: 32 t Stroke rate: 30 - 1100 strokes/min Sheet width: 0 - 120 mm Table size: 760 x 580 mm Feed unit: SANKYO V76 Adjustable stroke: 3-50 mm Column spacing (left-right): 800 mm Column spacing (front-back): 200 mm Shut height: 235 mm Feed length: 0 - 76.2 mm Table through-opening: 670 x 110 mm Ram adjustment: 50 mm Ram clamping area: 710 x 410 mm Isdpjcxxrljfx Adkjap Sheet thickness: 0 - 3 mm Strip speed: max. 70 m/min Control system: OP 15 SIEMENS PLC Feed angle: 165° Total power requirement: 18 kW Machine weight approx.: 6.5 t Required floor space approx.: 2.6 x 1.7 x 2.6 m Precision high-speed punching press in 4-column design, precision cam feed Sankyo V 76, feed direction from right to left, with Siemens CNC control OP 15, sound enclosure, Herion press safety valve, centralized lubrication, emergency stop safety system.

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Revizija 1989 Tlačna sila: 2x200 kN, Število hodov: 40 - 300 hodov/min, Hod: 50 mm, Sklopka: pnevmatska, Napetost: 380 V, Teža stroja: 2.200 kg, dodatni izmetalec, tovarniško okrepljena izvedba Iedpfx Aexx T Hfjdkoap

Leto izdelave: 1986, stanje: pripravljen za uporabo (rabljen), BSTA 60 HL, with BBV 202/120 CE certification available Ijdpfx Adeizkmteksap Contact us!

Leto izdelave: 1983, stanje: rabljeno, Bruderer BSTA 50 HL with BBV 202/120 Available – delivery time upon request Iedpfxsizwrle Adkjap CE certification possible Contact us!

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: nepreverjeno, Bruderer BSTA 50 H with 2x BBV 202/120 Used machine without CE marking Iedpfx Ajuwl Iajdksap Contact us!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 25 t, Bruderer BSTA 250-75B with BBV 190/85H - B-control system - Table 750 mm Iaodpfx Adjwu Sy Sekop - Adjustable stroke 13 to 38 mm - Complete documentation - Soundproof enclosure - Machine tested / overhauled, excellent condition! Contact us!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 19.269 h, Funkcionalnost: popolnoma funkcionalen, BSTA 41, with BBV 2x 202/120 + AS120 Fully overhauled by Bruderer Switzerland in 2007 Ijdpjuwlvdefx Adkoap CE certification possible Contact us!

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 18.686 h, Funkcionalnost: popolnoma funkcionalen, Podrobnosti glejte opis Iasdpfxexvx Tlo Adksp

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Vse podrobnosti najdete v prospektu. Iajdpfxoxvx R Do Adksp

Stanje: dober (rabljeno), Stock no.: 2832 Machine no.: 3004/73 Manufacturer: Raster Year of manufacture: 1973 Type / Model: HR40NL Pressing force: 40 t Table size: 650 x 385 mm Ram size: 350 x 190 mm Throat depth: 175 mm Distance table - bottom edge of ram: 300 mm Through-hole: 350 x 130 mm Ram adjustment: 80 mm Ram stroke: adjustable from 0 to 70 mm Installation height: 235 to 305 mm Sheet width: 10 to 200 mm Sheet thickness (continuous stroke): mm [data missing] Strokes per minute: 40 to 180 /min Connection: 4 kW Accessories/Equipment: Feeder clamp Iaedpfx Aderdgncjkep Condition: good Weight: approx. 4 t Machine dimensions: 1,400 x 1,800 x 2,250 mm

Stanje: novo, Leto izdelave: 2025, skupna višina: 5.150 mm, nastavitev hidravličnega cilindra: 200 mm, vgradna višina: 750 mm, višina mize: 1.117 mm, skupna širina: 2.600 mm, skupna dolžina: 4.000 mm, dolžina mize: 2.500 mm, širina mize: 1.300 mm, širina transportnega traku: 430 mm, stiskalna sila: 315 t, hod: 300 mm, razdalja med stranskimi nosilci: 850 mm, razdalja med stojali: 2.580 mm, skupna masa: 54.000 kg, krmilna napetost: 24 V, Standardized 315-ton stamping press with fixed stroke at an attractive price. Cost-optimized base configuration without enclosure and safety gates, intended for use inside a soundproof booth. Optional accessories such as safety gates/enclosure, press force measurement, tool change/clamping system, etc., are available. For technical specifications, please refer to the PDF document. Isdpfxswc A Ebj Adksap Delivery time: 6 months.

Stanje: novo, Leto izdelave: 2025, skupna višina: 3.700 mm, nastavitev hidravličnega cilindra: 150 mm, vgradna višina: 650 mm, višina mize: 854 mm, skupna širina: 2.479 mm, skupna dolžina: 4.186 mm, dolžina mize: 2.000 mm, širina mize: 1.200 mm, širina transportnega traku: 350 mm, stiskalna sila: 250 t, hod: 250 mm, razdalja med stranskimi nosilci: 920 mm, razdalja med stojali: 2.040 mm, skupna masa: 31.000 kg, krmilna napetost: 24 V, Standardised 250 ton stamping press with fixed stroke at an attractive price. Cost-optimised basic configuration without enclosure and safety gates, intended for use in a soundproof cabin. Optional accessories available, such as safety gates/enclosure, press force measurement, tool change/clamping system, etc. For technical specifications and offered accessories, please refer to the PDF documents. Iaodpfx Adswb Dh Iokep Delivery time: 6 months.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2004, obratovalne ure: 5.000 h, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.300 mm, nastavitev hidravličnega cilindra: 100 mm, vgradna višina: 500 mm, višina mize: 1.000 mm, skupna širina: 2.200 mm, dolžina mize: 1.400 mm, stiskalna sila: 200 t, širina krmilne omare: 2.000 mm, hod: 160 mm, razmak između stupova: 1.450 mm, delovna širina: 1.100 mm, razdalja med stranskimi nosilci: 400 mm, skupna masa: 27.000 kg, vrsta nastavitve višine: električni, potrebna višina: 4.500 mm, zahteva za prostor dolžina: 2.200 mm, potrebna širina: 1.800 mm, High-precision cutting and embossing press, U.T accuracy +/- 0.01, ideal for the production of fuel cell stacks or hydrogen electrolysers. The press is also suitable for (smooth) fineblanking, with a stroke rate of 1–70 strokes per minute. Thanks to 4 connecting rod plungers, off-center loading is no problem. Jamming of the press is also not possible. The press will be completely overhauled and delivered with a new Siemens S7 control system. Iedpfx Ast Nf Agodkjap

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 2.000 mm, širina mize: 1.200 mm, stiskalna sila: 200 t, hod: 100 mm, Raster stroj za izsekavanje z Desch kompakt pogonom. Tridelna kroglična (vlečna) konstrukcija iz litega železa. Fiksni hod 100 mm. Hidravlično preobremenitveno varovalo. Mehansko obnovljen leta 2021. Siemens S7 krmiljenje. Po želji z ravnalnim strojem in trakasto linijo. Iaodpfexcbcvsx Adkjp

Leto izdelave: 1983, stanje: rabljeno, številka stroja/vozila: 1338-5, Pressing force: 30 t Table size: 500 x 700 mm Stroke: 50 mm Ram bore: 40 mm Table through-hole: 100 mm Total power requirement: 380 V, 11 kW Isdpfxe N Hcge Adkeap Weight: 2000 kg Space requirement: 1000 x 2300 x 2170 mm

Stanje: rabljeno, Proizvajalec Tucker Tip ERC80/ERF23FBGR/ERT Po naši oceni je stroj v dobrem rabljenem stanju in si ga je mogoče po predhodnem dogovoru ogledati pod napetostjo. Sistem za prebijanje z zakovicami: - ERC80 - ERF23 - BGR - ERT Na voljo je približno 150 kosov. Iaodpfx Aexwp Nysdksp Pribor, prikazana orodja in vpenjalna sredstva so vključeni v obseg dobave le, če je to posebej navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih ter vmesna prodaja so pridržane!

Stanje: rabljeno, Leto izdelave: 1976, Pressure: 160 tons Side frame passage: 600 mm Installation height: 420 mm stroke top, adjustment bottom Ram adjustment: 80 mm Table surface: 1100 x 1100 mm Ram surface: 1030 x 800 mm Pass-through hole in table: 680 x 250 mm Adjustable stroke: 30–100 mm Strokes per minute: 40–180 Power requirement: 18.5 kW Weight: 20 tons Iasdpjcna Hfsfx Adkjp Height: 3950 mm Siemens press control and ALBA roller feed, year 1989, 400 x 3 mm

Stanje: rabljeno, Leto izdelave: 1999, Priključna napetost 220 V Nazivni tok 263/152 Št. stroja: Iodpfx Asvvx E Sedkoap Teža stroja cca 1 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, A used four-column punching press MABU with MPC200 control system, in very good technical condition. Iaodpfxsuh U Ete Adkep Pressing force 30° before BDC: 250 kN Stroke rate, infinitely adjustable: 80–400 strokes/min Stroke adjustment: 7–62 mm Tool holder: diameter 40H7x90 mm Clearance between columns front/side: 404/334 mm For further technical data, please refer to the PDF document. Technical data and dimensions: subject to change/errors excepted.

Stanje: rabljeno, Leto izdelave: 1997, Pressure: 630 t Stroke: 300 mm Strokes per minute: 10–75 spm Table size: 3600 x 2200 mm Passage width: 4000 mm Ram area: 3600 x 2200 mm Iedewx R Rdspfx Adkjap Lateral frame passage: 2000 mm Ram adjustment: 150 mm Installation height (stroke down, adjustment up): 1000 mm Operating voltage: 400 V Height above floor: 7600 mm Press pit depth: 2500 mm Total power requirement: 160 kW Machine weight: approx. 225 t Space requirement: approx. 750 m² Complete blanking line with decoiling/feeding system and destacking system. System suitable for strip width 300–1600 mm and strip thickness 0.5–3 mm. The machine is equipped with two sliding tables that can be swapped out from the front. The destacking unit is positioned laterally and has two pallet stations. Destacking can also be performed to the rear with 2 pallets. 3-fold coil feeding, each for 25 t; Schnutz decoiler, strip infeed, straightening machine, and roll feeder.

Stanje: rabljeno, dolžina mize: 540 mm, širina mize: 470 mm, stiskalna sila: 30 t, skupna masa: 3.000 kg, višina izdelka (maks.): 120 mm, najv. debelina jeklene pločevine: 3 mm, Pressure: 30 t Stroke: 8 - 40 mm Iaedpfx Adsv Uc Arokep Strokes per minute: 100 - 600 /min Clearance between uprights: 330 mm Installation height (stroke + ram adjustment at top): 280 mm Lateral upright passage: 300 mm Through-hole in table: 315 x 110 mm Table height above floor: 1000 mm Material thickness: max. 3.0 mm Feed length: 60 mm Drive power: 5.5 kW Ram height adjustment: max. 40 mm Strip feed width: 170 mm Press dimensions (L x W x H): 1160 mm x 1200 mm x 2150 mm Control panel dimensions (L x W x H): 350 mm x 700 mm x 960 mm Weight: approx. 3000 kg.