Avtomatski stroj za izsekovanje

BSTA 18

Stanje: dober (rabljeno), BSTA 18 Feed unit: BBV High-speed: 600 spm Max. pressing force: 180 kN Max. strip width: 120 mm Feed: Bruderer BBV190 Completely overhauled, siliconized Good condition More high speed presses in stock from Bruderer (models BSTA 18, 20, 30, 200, 50) as well as Schaal and Mabu presses. Fsdpfxo Udtye Abvefw

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Fsdpjfxyhfofx Abvsfw Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: rabljeno, številka stroja/vozila: 4131, Comm. No. Lg 34422 High-performance punching press BRUDERER BSTA 60 H From ongoing production. Stroke adjustment requires repair. Ffsdpfx Asinzdlobvow Without soundproof enclosure and without strip feeding line. Feeder BBV 202/120

Stanje: novo, Leto izdelave: 2026, Prod-Masz provides you with a brand-new, fully operational machine that has been tested under working conditions. It meets the requirements of applicable standards regarding design and operational safety. - The extension table facilitates handling of large sheet metal panels on the table - Support table with measuring scale - Robust, compact steel construction - High-quality, durable steel blades - Extremely sturdy, heavy cast iron frame - Ground and hardened guillotine shear blades - Rear gauge system with scale - CE-certified quality - Declaration of conformity - For steel sheets up to 1.2 mm - Open design suitable for continuous cutting - Max. working width: 3000 mm Ffjdpfx Abeda I Ihsvew - Motor power: 2.2 kW - Oil type: HL 46 - Pressing force: 4 t - Working pressure: 120–150 bar - Equipped with hydraulic compensators above the cutter bar Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight: approx. 1000 kg Shipping cost: 500 euros We look forward to hearing from you!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1983, Press force: 2,000 kN Strokes per minute: 60 1/min Adjustable stroke: 20 - 120 mm Shut height: 450 mm (largest stroke, up) Ram adjustment: 100 mm Table surface: 850 x 810 mm Passage opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-way ram guide Fedpfx Abogpxc Sevofw - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Equipment: - 1 right-side feed with grippers - 1 two-point eccentric press, 90 kN - 3 standard slide units - 1 narrow slide unit - 1 control shaft Working range: - Wire diameter range: 0.5 – 4.0 mm - Strip width: up to 60 mm Ffjdpfx Asn E N Ndobvow - Feed length: up to 270 mm - Capacity: up to 350 cycles/min

Stanje: dober (rabljeno), Leto izdelave: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Fsdpfx Ashrnbkebvefw Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Weight: approx. 14 t Without control cabinet.

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), Eight identical label dispensers are available, speed: 0-80 m/min, throughput: 1000 labels/min, length: 700 mm, width: 320 mm, height: 500 mm, including accessories. Fedpfx Abjflmc Novjfw

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Ffodscxxx Repfx Abvjw Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Stanje: rabljeno, Širina materiala: 300 mm Teža koluta: 3 t Debelina materiala: 2 - 4 mm Ravnalko, 7 valjev, proizvajalec Schleicher, tip RM 6-95/160 Širina traku: 300 mm Debelina traku: 2 - 4 mm Ravnalni presek: 1200 mm² Napetost: 220/380 V 50 Hz Moč: 3,1 kW Razvijalec s pritiskalnim valjem, proizvajalec Schleicher, tip H-3 Maksimalna obremenitev: 3 t Širina traku: 400 mm Napetost: 220/380 V 50 Hz Ffjdpfjcdrmmsx Abvjw Moč: 3,92 kW Brez krmiljenja