Avtomatske izsekovalne stiskalnice nakup rabljenega (156)

Stanje: rabljeno, Leto izdelave: 1992,

Leto izdelave: 1981, stanje: rabljeno, Pressure: 20 t Stroke: 8–38 mm Strokes per minute: 100–1800 Table surface: 400 x 400 mm Table opening: 380 x 80 mm Table height: 1000 mm Machine weight: approx. 4 t Space requirements (WxDxH): approx. 1600 x 1600 x 3100 mm Iaedpfelp U Nmox Adksp Machine number: 6068

Leto izdelave: 2008, stanje: rabljeno, Pressure: 315 t Stroke: 40–200 mm Stroke rate: 20–100 strokes/min Slide adjustment: 120 mm Slide area: 2000x1100 mm Bolster area: 2000x1200 mm Die opening in table: 1700x250 mm Shut height (bottom), slide adjustment top: 500 mm Side frame window: 820x650 mm Total power requirement: 45 kW Machine weight: approx. 44 t Hydraulic clutch-brake combination Iaodpfxjrdi Dlj Adkep Hydraulic overload protection in slide Semi-automatic stroke adjustment Motorized slide adjustment Stroke rate frequency-controlled Central grease lubrication for guides Oil circulation lubrication Slide counterbalance cylinders Safety doors front/rear Hydraulic die clamping system Extendable bolster plate Hydraulic rollblock strips in table Feed unit: Helmerding EWH800/150 (V-1341-6518) Strip width: 100–800 mm, strip thickness: 0.5–6.0 mm, max. strip cross-section: 1600 mm² Loop control, height adjustment via geared motor Straightener: R-70/800/9-S (R-1343-6518) Strip width: 100–800 mm, strip thickness: 0.5–4.0 mm, Max. strip cross-section: 1600 mm² at 450 N/mm² Straightening speed, frequency-controlled up to 25 m/min Strip introduction aid: transfer table with hydraulic separating wedge, hydraulically adjustable Hold-down hydraulically adjustable Strip edge guidance: 1 pair of lateral roller guides, adjustable via handwheel Feed rollers: 2x rollers Ø140 mm, pneumatically adjustable Straightener: 9x rollers Ø70 mm, adjustment manual via handwheel Decoiler: HE-4/800/MOT/HYD (H-1342-6518) Strip width: 100–800 mm Max. load: 4 t Coil inner diameter: Ø508 mm Coil outer diameter: Ø1000–1600 mm Drive, frequency-controlled Limiting arms Hydraulic expansion Hydraulic hold-down arm

Leto izdelave: 1995, stanje: rabljeno, Pressure: 125 t Stroke: 10–80 mm Strokes per minute: 240 spm Ram adjustment: 80 mm Table surface: 850 x 600 mm Ram surface: 760 x 550 mm Pass-through opening in table: 850 x 130 mm, adjustable Table height: 1100 mm Pin hole in ram: Ø 50 mm Total power requirement: kW Machine weight: approx. 13 t Required space (LxWxH): approx. 3000 x 2000 x 3300 mm Pneumatic clutch-brake combination Manual ram adjustment Manual stroke adjustment Iodpfx Adolp U Nqokjap Machine number: 212341 Centralized oil lubrication Roll feed: Alba GVHY300 Straightening machine: Soprem BRM 19/150/16/U

Stanje: novo, Leto izdelave: 2025, Druck 75 t Hub 8-80 mm Hubzahl 80-200 Hub/min Stößelverstellung 70 mm Tischfläche 900x600 mm Stößelfläche 900x470 mm Durchfallöffnung im Tisch 450x180 mm Durchgang zw. den Ständern - seitlich 500x350 mm Durchgang zwischen den Säulen (seitlich) 788 mm Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 10 t Raumbedarf ca. BxTxH 1600x1200x2800 mm Öl-Umlaufschmierung Hydraulische Überlastsicherung, einstellbar Stößelausgleichszylinder Presskraftüberwachung, einstellbar Thermische Lagerstellenüberwachung Pneumatische Kupplungs-Bremskombination Pneumatische Schutztür, vorne Lichtvorhang Schutzbetrieb vorne Flügeltür, schwenkbar, hinten Iodpfx Asxh Swuedkoap 8x Werkzeugsicherung frei programmierbar 8x elektronische Nocken frei programmierbar Förderbandansteuerung Verteilerkasten 400V/230V Arbeitsraumbeleuchtung LED Schnittstelle Bandanlage Rollblockleisten im Tisch, mechanisch

Leto izdelave: 1981, stanje: rabljeno, Pressure: 63 t Stroke: 6–60 mm Strokes per minute: 90–550 spm Installation height (table bottom to ram adjustment top): 300 mm Table area: 780 x 600 mm Ram area: 807 x 460 mm Ram pin hole diameter: 40 mm Ram adjustment: 80 mm Total power requirement: 15 kW Iaodpfxelp U R Is Adkep Machine weight approx.: 8 t Space requirement (WxDxH): approx. 2900 x 2000 x 3000 mm Oil central lubrication IMCO press force measuring device

Leto izdelave: 1996, stanje: rabljeno, Pressure: 80 t Stroke: 8–140 mm Stroke rate: 105 strokes/min Ram adjustment: 100 mm Table surface: 900 x 625 mm Ram surface: 600 x 280 mm Passage opening in table: Ø 150 mm Table height: 1000 mm Ram bore: Ø 40 mm Installation height, ram adjustment at top: 490 mm Machine weight: approx. 7 t Iaedpfx Adjrc Ipnekop Space requirement (WxDxH): approx. 1800 x 2200 x 2600 mm Manual stroke adjustment Manual ram adjustment Mechanical rupture disc Hydraulic clutch-brake combination Manual central grease lubrication 2x roller feeds Zehnder+Sommer EV 320 (infeed and outfeed sides)

Stanje: rabljeno, Leto izdelave: 2000, Tlak 130 t Število gibov 50-250 gibov/min Širina pločevine 250 mm Hod 8-120 mm Nastavitev batnice 100 mm Površina mize 1600x800 mm Površina batnice 1600x800 mm Prebojna odprtina v mizi 1100x250 mm Višina mize 1000 mm Vgradna višina spodaj, nastavitev batnice zgoraj 370 mm Teža stroja cca 24 t Prostorske zahteve cca D x Š x V 3900x2500x3800 mm Hidravlična kombinacija sklopka-zavora Oljna centralna mazalna naprava Hidravlično varovalo pred preobremenitvijo Samodejna nastavitev hoda Motorizirana nastavitev batnice Ijdpfx Asxh Sypedkeap Zavarovanje orodja Vključno s podajalnikom valjev ebu tip: EVM250, 250x3mm

Leto izdelave: 2003, stanje: rabljeno, Pressure: 100 t Stroke: 10–130 mm Strokes per minute: 30–90 spm Throat depth: 330 mm Ram adjustment: 100 mm Table area: 950 x 660 mm Ram area: 540 x 440 mm Through-hole in table: Ø 230 mm Table height: 1000 mm Pin hole in ram: Ø 50 mm Total power requirement: 7.5 kW Machine weight approx. 7 t Isdpfx Aora Rr Eodkoap Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW feed straightener VRMA 40/78, year of manufacture 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Leto izdelave: 1964, stanje: rabljeno, Pressure: 40 t Gap width: 450 mm Stroke: 20–50 mm Ram adjustment: 60 mm Ijdjlp U Exepfx Adkeap Table surface: 370 x 400 mm Ram surface: 250 x 370 mm Through-hole in table: 120 x 280 mm Table height: 850 mm Machine weight: approx. 2.5 t Space requirements (WxDxH): approx. 1600 x 1300 x 2800 mm PIV gearbox Mechanical overload protection in ram Mechanical feed

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Mechanical roll feeder BBV202/120 for attachment to BSTA60 Iasdper Hmnmofx Adkop Left-side installation Driven via the main shaft / cardan shaft of the press - cardan shaft / mounting plate not included in delivery Mechanical feed length adjustment via spindle No encoder mounting available

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Mechanical roller feed BBV202/120 for mounting on BSTA25 or BSTA50 Isdpfx Aor Hmpcodkjap Left-hand installation Drive via the main shaft/power take-off shaft (PTO) of the press – PTO shaft/mounting plate not included in delivery Mechanical feed length adjustment via spindle Driveshaft protection with tube system Including encoder mounting

Stanje: zelo dobro (rabljeno), Here we offer you a RIVSET punch rivet system. Including punch rivet tongs Type: 9524-640-826-7 Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Iajdpfjpfcx Isx Adkjp Signal voltage: 10 V Year of manufacture: 2011 Equipped with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Max. permissible riveting pressure: 250 bar Max. permissible riveting force: 78 kN Weight of tongs: approx. 195 kg Type: 9524-640-826-7 The system was tested by the manufacturer and is fully functional. Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and error!) Should you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a control unit. Control unit for RIVSET clinching system Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Type: 6039402 The system was inspected by the manufacturer and is fully functional. Condition: used Iajdopgul Eepfx Adkjp Scope of delivery: (See picture) (Specifications are subject to change and errors excepted!) We are happy to answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a RIVSET self-pierce riveting system. Including rivet setting pliers Operating voltage: 400V 50 Hz Rated current: 12A Main fuse: 35 A Iedpfx Adjpfcx Sjkjap Control voltage: 24 V Signal voltage: 0-10 V With Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Max. permissible riveting pressure: 250 bar Max. permissible setting force: 78 kN Weight of setting pliers: approx. 279 kg Year of manufacture: 2012 Type: 9524-640-824-5 The system was inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (See picture) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Here we offer you a RIVSET rivet punch system. Includes rivet punch pliers Model: 9524-640-826-7 Operating voltage: 400V 50 Hz Iajdpfx Aspgulasdkop Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 Max. permissible riveting pressure: 250 bar Max. permissible riveting force: 78 kN Pliers weight: approx. 195 kg Type: 9524-640-826-7 The system was tested by the manufacturer and is fully functional. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors!) Further questions can gladly be answered by phone.

Stanje: novo, Leto izdelave: 2024, Pressure 75 t Stroke 8–80 mm Strokes per minute 80–200 spm Ram adjustment 70 mm Table area 900x600 mm Ram area 900x470 mm Table through-hole 450x180 mm Clearance between uprights (lateral) 500x350 mm Passage between columns (lateral) 788 mm Total power requirement 10 kW Machine weight approx. 10 t Space requirement approx. WxDxH 1600x1200x2800 mm Oil circulation lubrication Adjustable hydraulic overload protection Ram counterbalance cylinder Iodpfx Aevfxl Rjdksap Adjustable press force monitoring Thermal bearing point monitoring Pneumatic clutch-brake combination Pneumatic safety door, front Light curtain safety operation, front Swing door, rear 8x programmable die protection circuits 8x programmable electronic cams Conveyor control Distribution box 400V/230V Work area LED lighting Interface for coil line Mechanical roll block rails in table Elmea coil line, consisting of: - Elmea decoiler 3 t - Elmea straightener 300x3 mm - Elmea roller feeder 300x3 mm Safety fence system for coil line

Stanje: rabljeno, Leto izdelave: 2001, SanGiacomo stiskalnica Model: T250 DM Stiskalna sila: 2.500 kN Nastavitev hoda: 21 - 230 mm Nastavitev batnice: 120 mm Število hodov: do 75 1/min Površina batnice: 2.300 x 1.090 mm Iajdpfx Aex Ex Dxedkop Površina mize: 2.300 x 1.090 mm Dimenzije: 3.550 x 1.910 x 5.200 mm (DxŠxV) Teža stroja: 42.000 kg

Leto izdelave: 1986, stanje: rabljeno, Pressing force: 15 t Installation height: --- mm Strokes per minute: 200 – 2,000 Table surface: --- mm Ram area: 490 x 200 mm Sheet width: 5 – 50 mm Stroke adjustment: 10–30 mm Weight: 3 t Dimensions (L x W x H): 1,370 x 1,200 x 2,200 mm Drive power: 10 kW Pass-through opening in table: 350 x 100 mm Iaodpfx Adofn Apxjkop Table width: 530 / 210 mm Table length: 530 / 350 mm Only 2 years in operation High-speed model

Stanje: rabljeno, Leto izdelave: 1980, Pressing force 25 t Stroke rate 1,500 spm Total power requirement 20 kW O F F E R We are pleased to offer you, subject to prior sale and error, the following from stock: BRUDERER High-Speed Automatic Punching Press with Mass Counterbalance Model: BSTA 25 Year: 1980 _____ Nominal press force: 25 t Stroke rate min. – max.: 100 – 800 / 950 / 1075 / 1240 / 1350 / 1500 spm Adjustable stroke lengths: 13 / 16 / 19 / 25 / 32 / 38 mm Ram adjustment: 51 mm Table size: 530 x 530 mm Ram face (upper): approx. 360 x 430 mm Die height: 230 - 281 mm Front opening for tool change: approx. 540 mm Adjustable strip entry height: 80 – 150 mm Max. strip width / left side opening: 202 / 203 mm Main drive approx.: 18 kW Total connected load approx.: 20 kW - 380 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • BRUDERER system for complete mass counterbalancing by means of a transverse eccentric shaft and adjustable lever system Iaodpfx Adevu E Iqokop • BRUDERER strip feed unit, left-side mounted, type BBV 202/120, adjustable stroke, height-adjustable • Horizontal decoiler, tension-controlled • Continuous stroke and single stroke selectable, inching operation, parts counter, air blow-off device • Separate floor-standing control cabinet and electrical cabinet, vibration dampers • Large, sophisticated sound enclosure (disassembled) Condition: Very good! Previously used for precision electronics connectors, regularly serviced by BRUDERER! A video of the machine will be available shortly—please click here soon: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice We look forward to your order. Further mechanical and hydraulic presses and other machine tools in stock – please check our current inventory on our website: geiger-

Stanje: rabljeno, Leto izdelave: 1987, Pressure 40 t Strokes 500 strokes/min Total power requirement 5.5 kW O F F E R We can offer you, subject to prior sale and errors, from stock, non-binding: SCHAAL High-Speed Punching Press Model: SEP 40 Year of manufacture: 1987 _____ Nominal Pressing Force: 40 t Stroke range (min – max): 100 – 500 strokes/min Iasdsvu E Iwopfx Adkjp Adjustable stroke length: 8 – 70 mm Ram adjustment: 70 mm Table size: 550 x 580 mm Ram surface (top, approx.): 300 x 340 mm Die height: 255 mm Front opening for tool change (approx.): 560 mm Adjustable strip feed height: 120 mm Max. strip width / lateral clearance left: 260 / 260 mm Main drive approx.: 7.5 kW Total drive approx.: 10 kW - 380 V – 50 Hz Weight approx.: 4,000 kg Accessories / Special Equipment • Strip gripper feed unit, left side mounted, Type SZV 2, stroke adjustable, height adjustable • SANDER & EBERT horizontal decoiler, tension-controlled • Continuous stroke and single stroke adjustable, inching mode, piece counter, air blow-off unit • Separate free-standing control and switch cabinets, vibration dampers • Large, elaborate soundproof cabin (disassembled) Condition: Very good! Used for precision electronic connectors, regularly maintained! Please click here soon for a video of the machine: Delivery: from stock, immediate, FCA Metzingen Payment: net – upon receipt of invoice We look forward to your order. Further mechanical and hydraulic presses and other machine tools in stock – please check our inventory on our website: geiger-.

Stanje: rabljeno, Leto izdelave: 1985, Pressure 25 t Stroke rate 1500 strokes/min Total power requirement 20 kW O F F E R We can offer you the following ex stock, subject to prior sale and errors excepted, without obligation: BRUDERER Iasdpfovu E I Dex Adksp High-speed automatic punching press with mass counterbalance Model BSTA 25 Year of manufacture 1985 _____ Nominal press force 25 t Stroke rate min. – max. 100 - 800 / 950 / 1075 / 1240 / 1350 / 1500 strokes/min Adjustable stroke lengths 13 / 16 / 19 / 25 / 32 / 38 mm Ram adjustment 51 mm Table size 530 x 530 mm Ram surface approx. 360 x 430 mm Shut height 230 - 281 mm Front opening for tool change approx. 540 mm Adjustable strip infeed height 80 – 150 mm Max. strip width / side clearance left 202 / 203 mm Max. strip stroke 120 mm Main drive approx. 18 kW Total drive approx. 20 kW - 380 V – 50 Hz Weight approx. 4,500 kg Accessories / Special equipment: • BRUDERER system for complete mass counterbalance using a transverse eccentric shaft and adjustable lever system. • BRUDERER strip feed unit, left-side mounted, model BBV 202/120, stroke adjustable, height-adjustable. • Continuous and single stroke modes adjustable, inching operation, piece counter, blow-out device. • Separate control cabinet and switch cabinet, vibration dampers. • Currently no decoiler available. • Large, complex soundproof cabin (disassembled). Condition: Very good condition! Previously used for precision electronic connector production. Please click here soon for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: net cash – upon receipt of invoice We look forward to receiving your order. More mechanical and hydraulic presses as well as other machine tools in stock – please check our current inventory on our website: geiger-

Stanje: rabljeno, Leto izdelave: 1978, Presskraft 160 t Hubzahl 40 – 120 Hub/min Blechbreite mm gesamter Leistungsbedarf 40 kW Presskraft 160 to (1.600 kN) Tischaufspannfläche 1.100 x 1.280 mm Stößelaufspannfläche 850 x 890 mm Abstand zwischen Stößelführungen 1.120 mm Abstand zwischen den Ständern (unterhalb der Führungen) 1.350 mm Hubzahl stufenlos verstellbar 40 – 120 /min Hubverstellung 30 / 68 / 114 / 160 mm Stößelverstellung motorisch 125 mm Einbauhöhe je nach Hub – ohne Aufspannplatte – 460 – 650 mm mit Aufspannplatte – 340 – 530 mm Zulässige Hubzahl in Relation zum Materialvorschub: Bei 300 mm = 40 – 60 Hübe Bei 150 mm = 120 Hübe Gesamtantriebsleistung ca. 40 kW – 500 V – 50 Hz Gewicht ca. 24.000 kg Zubehör / Sonderausstattung: Ijdst Hwz Nepfx Adkoap • FREI / WEINGARTEN Richtapparat Typ AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, keine Grube erforderlich). Das Blechband läuft über die Abrollhaspel zum einseitigen Zangenvorschubgerät und anschließend in die Presse. • HEILBRONN Coilabwickelgerät Typ HAEMH 4000/500 S #204753 mit Coilablageplatz, von dem das Coil aufgenommen und gespannt wird. Danach Rückführung in die Ausgangsposition. Max. Coilgewicht 4.000 kg, max. Coil-Ø 1.500 mm, max. Bandbreite 500 mm. • Angebauter Richtapparat für max. Blechbreite 400 mm, Blechführung in der Breite verstellbar, Blechdicke 1 – 3 mm einstellbar. • Automatische Öl-Umlaufschmierung mit Überwachung. • Hydraulische Überlastsicherung, motorische Stößelverstellung 125 mm. • Förderband für die fertigen Pressteile, separater Schaltschrank – modernisiert 1990 –.

Stanje: rabljeno, Leto izdelave: 1992, številka stroja/vozila: 9802, Pressure: 80 t Stroke rate: 100 - 1000 strokes/min Stroke: 16-63 mm Table surface: 970 x 920 mm Through-hole in table: 740 x 100 mm Ram surface: 760 x 510 mm Distance table/ram: 280 mm Compressed air: 6 - 10 bar Iaedpsh Ra N Rsfx Adksp Total connected load: 43 kW Machine weight approx.: 15.5 t Space requirement approx.: 232 x 125 x 326 cm Machine in very good condition, has not been in operation for approx. 6 years due to company closure. Equipped with KYORI GX 80 feeder, 4 vibration damping feet, separate control cabinet, additional oil cooling unit; cooling unit.

Stanje: rabljeno, Leto izdelave: 1979, številka stroja/vozila: 5255, Pressure: 30 t Isdpjcxxu Njfx Adkeap Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left side Adjustable stroke (min–max): 16–40 mm Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed stamping press in three-column design, equipped with air cooler, piece counter, separate control cabinet, air clutch, and BRUDERER precision double-roll feeder, left side.