Avtomatske izsekovalne stiskalnice nakup rabljenega (163)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 1203697, Used stamping press Manufacturer: Haulick & Roos Model: RVD 8/800 NS Hfodpfxjudn Uto Ab Tjr Press with adjacent control panel: Haulick & Roos RVD 80-800NS Eccentric press with double connecting rods and 4-point mounted eccentric shaft No.: 1203697 Year of manufacture: 1990 Pressing force: 800 kN Speed: 30–300 strokes/min Drive: 26 kW Ram stroke: 4–60 mm Ram adjustment: 80 mm Table: 800 x 640 mm Pass-through hole: 780 x 60–160 mm Table height above floor: 1240 mm Upright width: 780 mm Lateral upright distance: 350 mm Shut height (max. stroke bottom/ram top): 300 mm Space requirement press (LxWxH): 3200 x 1700 x 3000 mm Control cabinet (LxWxH): 1800 x 400 x 1900 mm Weight: 12,000 kg Decoiler: Eigl 2527-90 Motorized: No Straightening unit with loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300 mm Max. thickness: 3 mm Number of rollers: 5 Feeder: Haulick & Roos RS 260/120°/2727 Max. feed length: 260 mm Max. width: 260 mm Max. thickness: 3 mm Feed speed: 40 m/min Material cross-section up to 800 mm?

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11/7, Motorizirana upogibna preša s podajalno ploščo, model RAS UpDownBend 78.30, namenjena za upogibanje tanke pločevine. Za razliko od klasičnih upogibnih preš se dvižna plošča premika gor in dol, kar omogoča upogibanje brez obračanja obdelovanca. Idealna za velike, težke kose ali obdelovance, ki zahtevajo veliko manipulacij. Hedpow A It Rofx Ab Tsfr Znamka in model: RAS UpDownBend 78.30 Leto izdelave: 2009 Tehnične specifikacije: • Pozitivno in negativno upogibanje • Dolžina upogibanja: 3200 mm • Kapaciteta upogiba: 4 mm (mehko železo) • Minimalni dovoljeni radij upogiba: 1,5 x debelina pločevine • Maksimalna odprtina zgornjega vpenjalnega okvirja: 600 mm • Maksimalni kot upogiba: 135° • Minimalna dolžina upogiba: 6 x debelina pločevine • Globina hrbtnega umerjanja: 95–1500 mm • CNC upravljanje: CNC krmilnik 6000-4 • Poraba energije: 15kW • Teža: 11T

Stanje: rabljeno, Leto izdelave: 1995, Pressing force: 100 t Stroke: 20 - 120 mm Strokes per minute: 40 - 240 Upright gap: 1300 mm Shut height (Stroke + Ram adjustment, top position): 670 mm Side clearance between uprights: 400 mm Table surface: 1200 x 800 mm Table through-hole: 900 x 200 mm Table height above floor: 1150 mm Ram surface: 1130 x 650 mm Ram adjustment: 80 mm Material width: 250 mm Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Feed length: 1 - 9999.9 mm Drive power: 22.0 kW Weight: 16.0 t Hodpfowc U Nljx Ab Tofr Space requirement (W x D x H): 3.7 x 2.5 x 3.7 m Overall height above floor: 3.7 m Approved for automatic operation according to CE standards Equipped with infinitely variable drive (PIV gearbox), pneumatic clutch/brake unit (Ortlinghaus), electronic press force monitoring (dual-channel), automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, motorized oil recirculation lubrication system Electronic roll feed, manufacturer: Kaiser, type KWV 250

Stanje: dober (rabljeno), Technical data . Pressing force 30 t Stroke rate 100 – 600 /min Adjustable ram stroke 8 – 40 mm Shut height 200 mm . Various decoilers in stock up to 300 kg . . Hfedpfx Abjxu T Eye Tjr Continuous purchase of used German machines without NC or CNC control

Stanje: zelo dobro (rabljeno), Here we offer you a RIVSET punch rivet system. Including punch rivet tongs Type: 9524-640-826-7 Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Hodpfepfcx Iex Ab Tjfr Signal voltage: 10 V Year of manufacture: 2011 Equipped with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Max. permissible riveting pressure: 250 bar Max. permissible riveting force: 78 kN Weight of tongs: approx. 195 kg Type: 9524-640-826-7 The system was tested by the manufacturer and is fully functional. Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and error!) Should you have further questions, we are happy to assist you by phone.

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 18.686 h, Funkcionalnost: popolnoma funkcionalen, Podrobnosti glejte opis Hfjdpfx Asxvx Tlsb Ter

Stanje: rabljeno, Proizvajalec Tucker Tip ERC80/ERF23FBGR/ERT Po naši oceni je stroj v dobrem rabljenem stanju in si ga je mogoče po predhodnem dogovoru ogledati pod napetostjo. Sistem za prebijanje z zakovicami: - ERC80 - ERF23 - BGR - ERT Hfedpfx Abjxwp Nyj Tor Na voljo je približno 150 kosov. Pribor, prikazana orodja in vpenjalna sredstva so vključeni v obseg dobave le, če je to posebej navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih ter vmesna prodaja so pridržane!

Stanje: rabljeno, Leto izdelave: 1996, stiskalna sila: 50 t, hod: 51 mm, Bruderer BSTA 50USL, - Miza 1100 mm - Stroj je v prenovi, z novim krmiljenjem - Podajalnik po izbiri: BBV ali servo Hodpfx Ajwu Rraeb Tsfr Kontaktirajte nas za podrobno ponudbo!

Stanje: rabljeno, Leto izdelave: 1997, Pressure 130 t Hfjdovuugcjpfx Ab Tjr Clearance between uprights 1600 mm Stroke 8 - 140 mm Stroke rate 50 - 200 strokes/min Installation height (stroke + ram adjustment at top position) 520 mm Lateral pass-through between uprights 610 mm Table area 1600 x 880 mm Pass-through opening in table 1000 x 350 mm Table height above floor 950 mm Ram area 1600 x 880 mm Drive power 24.2 kW Machine weight approx. 28.00 t Space requirement approx. 4.3 x 2.2 x 3.8 m Ram adjustment 100 mm Approved for automatic operation according to German accident prevention regulations (UVV) with steplessly adjustable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, automatic stroke adjustment, 8-fold roller guide, electronic roll feeder (Hensel, EVX 500) with hydraulic intermediate ventilation 2025 - in progress: new control and safety electronics - Siemens S7-1500F, convenient operation via touch panel Video available from seller before dismantling

Stanje: rabljeno, Leto izdelave: 1985, Technical details: Pressing force: 40 kN Required air pressure: 8 bar Hfjdpfou Icwgex Ab Tsr Ram stroke adjustment min./max.: 6 – 50 mm Ram adjustment: 50 mm Stroke rate: 70 – 400 strokes/min Table size (L x W): 480 x 445 mm Table opening (L x W): 250 x 112 mm Overrun time: 80 ms at 450 rpm Ram clamping area (L x W): 420 x 345 mm Ram bore: Ø 40 x 230 mm Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Total power requirement: approx. 19 kVA (approx. 7.5 kW) Control cabinet weight: 0.3 t Machine weight approx.: 4,000 kg 40 t punching press without roller feed/strip uncoiler Operation via control panel/two-hand operation Modes: manual / automatic

Stanje: zelo dobro (rabljeno), Here we offer you a control unit. Control unit for RIVSET clinching system Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Type: 6039402 The system was inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (See picture) Hodopgul Ejpfx Ab Tjfr (Specifications are subject to change and errors excepted!) We are happy to answer any further questions by phone.

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Vse podrobnosti najdete v prospektu. Hfsdoxvx R Djpfx Ab Tor

Stanje: rabljeno, Leto izdelave: 1994, Pressure 250 t Column gap 1650 / 1400 mm Fixed stroke 150 mm Stroke rate 30 - 75 strokes/min Installation height (stroke + top ram adjustment) 665 mm Side column passage 550 mm Table size 1600 x 900 mm Table through-hole 1000 x 300 mm Table height above floor 980 mm Ram surface 1400 x 900 mm Drive power 42.0 kW Hfodpfx Asvuucwsb Ter Machine weight approx. 33.00 t Required space approx. 2.8 x 2.5 x 4.4 m Approved for automatic operation according to German accident prevention regulations (UVV) with steplessly variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight equalization, FIXED stroke, motorized ram adjustment, motorized central lubrication, electronic roller feed (Normatic, AESL 500-2.8) with motor (Indramat), motorized adjustable strip side guide, motorized height adjustment Tool change system Distance table - ram without tool change system approx. 765 mm Can be offered as-is (not commissioned) or alternatively with new Siemens S7-1500 F control system

Stanje: rabljeno, Leto izdelave: 1990, Technical details: Hfsdpfou Icxqex Ab Tjr Pressure: 63 t Upright clearance: 200 mm Stroke: 150 mm Installation height: 430 mm Strokes per minute: 400 spm T-slots H 12 650: 18 mm Table through-hole: 420 x 160 (W x L) mm Ram area: 650 x 450 mm Control: Wanske Tronicpress CNC Upright passage: 550 x 540 mm Tank: 200 l Fixed ram stroke: 100 mm Ram diameter: 40 mm Table height above floor: 1000 mm Table: 600 x 450 mm Table height above floor with vibration-damping feet: 880 mm Total power: 30 kW Machine weight approx.: 3.9 t Hydraulic high-speed punching press for precision applications - For punching, drawing, pressing, coining, bending, riveting, straightening, assembling - With hydraulic clamp feeding system type HS 150 and 7-roll straightening unit (driven) - Standard strip dimensions: approx. 0.4mm – 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm thickness can be processed. Feed length infinitely adjustable via control. - With round column ram guide - With automatic central lubrication - High-speed: up to 400 strokes/min - Motor-driven adjustable fixed stop (manually/motor-driven adjustable from below) - Operating modes: continuous or single stroke Equipment: - 1x hydraulic power unit - 2x control cabinets Condition: Punching press has a control system issue. Sold as-is, for spare parts or as a replacement machine. i.D.

Stanje: zelo dobro (rabljeno), Here we offer you a RIVSET self-pierce riveting system. Including rivet setting pliers Operating voltage: 400V 50 Hz Rated current: 12A Hedpfxepfcx Sj Ab Tjfr Main fuse: 35 A Control voltage: 24 V Signal voltage: 0-10 V With Hydac cooling unit OK-EL2S/3.0/M/400-50/1 Max. permissible riveting pressure: 250 bar Max. permissible setting force: 78 kN Weight of setting pliers: approx. 279 kg Year of manufacture: 2012 Type: 9524-640-824-5 The system was inspected by the manufacturer and is fully functional. Condition: used Scope of delivery: (See picture) (Specifications subject to change and error!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Leto izdelave: 1996, Pressure: 130 t Upright distance: 1220/1070 mm Stroke: 22 - 96 mm Strokes per minute: 20 - 120 spm Installation height (stroke + slide adjustment, top): 518 mm Hedsvuubyspfx Ab Tsfr Lateral gap between uprights: 600 mm Table area: 1220 x 880 mm Pass-through opening in table: 450 x 250 mm Table height above floor: 950 mm Slide surface: 1180 x 800 mm Drive power: 22.0 kW Machine weight approx. 17.50 t Space requirement approx. 3.7 x 1.75 x 3.55 m Slide adjustment: 110 mm Approved for automatic operation in accordance with German accident prevention regulations (UVV) with steplessly adjustable drive, hydraulic clutch/brake combination, hydraulic overload protection in the slide, pneumatic slide weight counterbalance, motorized slide adjustment, automatic stroke adjustment, 8-fold roller guide, electronic roll feed with hydraulic intermediate ventilation (Hensel, EVX 500)

Stanje: rabljeno, Leto izdelave: 1974, Technical details: Hfjdpfxsu Icx Ro Ab Ter Pressure: 30 t Ram area: 450 x 250 mm Ram adjustment: max. 50 mm (manual) Strokes per minute: 20 – 120 Stroke: approx. 20 mm Stroke adjustment: no stroke adjustment Installation height / working area: 220 – 280 mm Table area usable: 600 x 600 mm Total power requirement: 7.5 kW Machine weight approx.: 5.0 t Dimensions (L x W x H) – Machine: 1.8 x 1.2 x 2.7 m Dimensions (L x W x H) – Control cabinet: 0.92 x 0.46 x 1.4 m Four-column mechanical punching press with feeder unit with operator console Clearances: frame opening front = 350 mm, side = 258 mm

Stanje: zelo dobro (rabljeno), Here we offer you a RIVSET rivet punch system. Includes rivet punch pliers Model: 9524-640-826-7 Operating voltage: 400V 50 Hz Rated current: 13A Main fuse: 20 A Control voltage: 24 V Signal voltage: 10 V Year of manufacture: 2011 Hsdpfjpgulajx Ab Tefr Max. permissible riveting pressure: 250 bar Max. permissible riveting force: 78 kN Pliers weight: approx. 195 kg Type: 9524-640-826-7 The system was tested by the manufacturer and is fully functional. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors!) Further questions can gladly be answered by phone.

Stanje: rabljeno, Leto izdelave: 2004, Press force: 80 t Stroke: 16 - 63 mm Stroke rate: 100 – 750 strokes/min Upright gap: 970 mm Installation height (stroke + ram adjustment, upper position): 380 mm Lateral frame opening: 380 mm Table surface: 940 x 910 mm Clear hole in table: 770 x 190 mm Table height above floor: 1,180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Material width: 203 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standard With infinitely variable three-phase motor drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil recirculation lubrication Hfsdpfx Abevuua No Tjr Mechanical roller feeder Bruderer BBV 205/120, driven via main shaft/universal shaft of the press Guethle CK support arms An optional soundproof booth can be offered – price upon request.

Stanje: rabljeno, Leto izdelave: 1998, Pressure: 160 t Stroke: 30 - 90 mm Stroke rate: 50 - 300 strokes/min Frame gap: 1270 mm Installation height (stroke + ram adjustment top): 590 mm Lateral frame passage: 440 mm Table area: 1250 x 900 mm Pass-through opening in table: 950 x 300 mm Ram area: 1250 x 800 mm Ram adjustment: 100 mm Material width: 200 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 64.5 kW Weight: 21.00 t Space requirement: approx. 3.0 x 2.2 x 3.9 m (LxWxH) Approved for automatic operation according to CE standard With infinitely variable DC drive, hydraulic clutch/brake combination (Desch brand), automatic stroke adjustment, motorized ram adjustment, fixed table, oil circulation lubrication Mechanical roller feeder Bruderer BBV 205/120 driven by the main shaft/universal shaft of the press Hsdpfxsvut Uxs Ab Tsfr Cantilever brackets Guethle CK 01/0800

Stanje: rabljeno, Leto izdelave: 1988, Pressing force: 200 t Stroke: 30 - 160 mm Strokes per minute: 40 - 120 /min Upright clearance: 1500 / 1300 mm Shut height (stroke + ram adjustment at top): 860 mm Lateral frame passage: 600 x 530 mm Table surface: 1250 x 1250 mm Pass-through opening in the table: 550 x 300 mm Table height above floor level: 1000 mm Ram surface: 1250 x 1000 mm Ram adjustment: 125 mm Material width: 30 - 500 mm Material thickness: 0.5 - 3.0 mm Feed length: 0 - 999.9 mm Drive power: 50.0 kW Weight: 34.00 t Space requirement approx. 4.0 x 1.7 x 5.2 m (L x W x H) Approved for automatic operation in accordance with German accident prevention regulations (UVV). Hfsdpfxjvut S Do Ab Tor Equipped with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, motor-driven ram adjustment, automatic stroke adjustment.

Stanje: rabljeno, Leto izdelave: 1986, Pressure: 160 t Stroke: 20 - 120 mm Strokes per minute: 20 - 120 Upright clearance: 1300 mm Lateral column passage: 520 mm Installation height: 570 mm Table area: 1250 x 900 mm Pass-through opening in table: 900 x 250 mm Table height above floor: 1000 mm Hedevut Rtspfx Ab Tefr Ram area: 1100 x 700 mm Ram adjustment: 100 mm Material width: 20 - 320 mm Material thickness: 0.3 - 4.0 mm Feed length: 1.0 - 9999.99 mm Drive power: 18.5 kW Machine weight: approx. 25.0 t Space requirement: approx. 3.0 x 2.3 x 3.7 m (L x W x H) Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, electro-hydraulic overload protection, automatic stroke adjustment, motorized ram adjustment, pneumatic ram weight compensation, motorized central recirculating lubrication system Electronic roller feeder Kaiser KWV 320 Z, year 2000, with hydraulic intermediate ventilation

Stanje: rabljeno, Leto izdelave: 1996, Press force 63 t Column clearance 965 mm Stroke 4 - 60 mm Strokes per minute 30 - 800 spm Shut height (stroke + ram adjustment at top) 380 mm Lateral column passage 355 mm Table surface 960 x 640 mm Through-hole in table 850 x 140 mm Table height above floor 1150 mm Ram area 960 x 460 mm Drive capacity 32.5 kW Machine weight approx. 13.00 t Space requirement approx. 3.3 x 1.7 x 2.9 m Ram adjustment 80 mm Hfjdpovut Rgsfx Ab Tor Approved for automatic operation in accordance with CE standards with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motorized ram adjustment, mechanical gripper feed type GF 160 Can be offered in its current condition either with or without commissioning

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 63 t Stroke: 10 – 80 mm Strokes per minute: 75 – 400 /min Upright clearance: 1080 / 920 mm Shut height (stroke + ram adjustment top): 450 mm Lateral frame passage: 300 mm Table area: 1000 x 550 mm Hfsdpfxsvut Ixs Ab Tsr Through-hole in table: 700 x 160 mm Table height above floor: 1080 mm Ram area: 900 x 450 mm Ram adjustment: 80 mm Material width: 250 mm Material thickness: 0.3 – 3.0 mm Material cross-section: 750 mm² Feed length: 1.0 – 9999.9 mm Drive power: 11.0 kW Weight: 9.5 t Space requirements: approx. 2.8 x 2.7 x 3.1 m (L x W x H) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch/brake combination (Ortlinghaus brand), manual stroke adjustment, motorized ram adjustment, motorized oil circulation lubrication, pneumatic ram counterbalance Servo roll feeder: Kaiser KWV 250

Stanje: rabljeno, Leto izdelave: 1990, Pressure: 50 t Column gap: 800 mm Stroke: 4 – 60 mm Strokes per minute: 30 – 300 spm Shut height (stroke + ram adjustment at top): 400 mm Lateral column passage: 350 mm Hfjdpfxjvut Huo Ab Tsr Table surface: 780 x 640 mm Pass-through opening in table: 690 x 140 mm Table height above floor: 1150 mm Ram surface: 800 x 460 mm Drive power: 26.0 kW Machine weight approx.: 9.00 t Space requirement approx.: 2.4 x 1.7 x 2.9 m Ram adjustment: 80 mm Approved for automatic operation in accordance with German Accident Prevention Regulations (UVV) With infinitely variable drive, automatic stroke adjustment, electronic roller feed (PBK, WV 65-DSM 300P, year 2007) Can be offered in current condition, with or without commissioning — video available from the seller prior to disassembly