Avtomatska luknjarska stiskalnica z dvojnim stolpcem

HAULICK RVD 50-800 NS

Leto izdelave: 1981, stanje: rabljeno, Pressure: 63 t Stroke: 6–60 mm Strokes per minute: 90–550 spm Installation height (table bottom to ram adjustment top): 300 mm Gbodpfx Ajlp U R Ijnfjl Table area: 780 x 600 mm Ram area: 807 x 460 mm Ram pin hole diameter: 40 mm Ram adjustment: 80 mm Total power requirement: 15 kW Machine weight approx.: 8 t Space requirement (WxDxH): approx. 2900 x 2000 x 3000 mm Oil central lubrication IMCO press force measuring device

Stanje: rabljeno, Leto izdelave: 1995, Širina materiala 300 mm Teža koluta 1,25 t Debelina materiala 0,4 - 3,5 mm Notranji premer koluta 320 - 420 mm Zunanji premer koluta 1300 mm Presek materiala 750 mm² Število ravnalnih valjev 11 Premer ravnalnih valjev 60 mm Število vlečnih valjev 4 Premer vlečnih valjev 60 mm Hitrost 5 - 30 m/min Gbedpfewc U Izex Anfel Pogonska moč 5,0 kW Teža 1,4 t Potrebni prostor (ŠxDxV) 3,3 x 1,85 x 1,7 m Ravnalni stroj (Tip 1675-B11-FQ) s kontinuirno nastavljivim pogonom, gnani ravnalni valji, posamezna ročna nastavitev ležišča valjev, centralno nastavljiva širina traku, izhodna valjčna košara Enojni odvijalnik (Tip 2350 B-FPS) nenapajan, Z zračno zavoro, hidravlično centralno razširjanje, pnevmatska pritisna naprava Nadzor zanke traku preko senzorja

Stanje: rabljeno, Leto izdelave: 1993, Pressure: 100 tons Frame opening at front: 1400 mm Stroke: 250 mm Side openings: 400 mm Table: 1250 x 1100 mm Ram: 1250 x 1100 mm Stroke: 250 mm Speed: Rapid downwards 400 mm/sec, rapid upwards 330 mm/sec, under load: 24-43 mm/sec Power requirement: 33 kW Weight: 10,000 kg Height: 3,300 mm Width: 1,700 mm Depth: 1,800 mm Table ejector: 6 tons Cutting impact damping Gbedpfx Anec Uwx Dsfel Pressure, time and stroke dependent control Two-hand operation

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z stroke: 48 [mm] LOWER TURRET HEAD - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT UNIT - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tools speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - CNC control: Traub TX8i - Driven guide bushing - Coolant tank Gsdpfxeuhaxfo Anfsbl - Bar feeder: LNS TRYTON HYBRID

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Pressing force: 2,000 kN Table area: 2,300 x 1,100 mm (W x D) Die opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Side passage: 740 mm Installation height: 550 mm (stroke bottom, adjustment top) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Design features: • Control system Siemens + Beckhoff • 8-point sliding guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Control system Siemens + Beckhoff • Beckhoff panel for visualization • T-slots in table and ram (28mm, 300mm spacing) • Vibration-damping machine feet • 4 pcs. tool clamps + 4 pcs. cam outputs • Ram with 20mm wide central groove • Hydraulic tool clamping device on table and ram • Hydraulic roll blocks for tool change Strip feeding line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 – S Load capacity: 5,000 kg Strip width: 100 - 600 mm Expanding range: 470 – 520 mm Coil outside diameter: 2,000 mm Gbjdjv T Anljpfx Anfjl • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Back support disc and 3 pcs. detachable guide arms at front • Hydraulically operated and driven hold-down roller, lateral adjustment via handwheel • Loading saddle (stationary, decoiler moves hydraulically), lift height 770 mm with 4 pcs. limiting rods Straightening machine Type: RMBMZ 50.600 UF Strip width: 40 - 600 mm Strip thickness: 0.5 – 4.0 mm Straightenable cross-section: 1,200 mm² Number of rollers: 9 pcs. Straightening roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Design features: • Rollers hardened, ground and hard-chrome plated • Drive of lower straightening rollers and feed rollers by gear transmission • Motorized adjustment of roller stand via motors, setting accuracy 1/100 mm, values can be saved • Upper rollers can be lifted by 100mm • Feed roller pneumatically liftable • Lateral strip guide at inlet with handwheel and leadscrew • Exit roller basket and loop bridge • Loop control by ultrasonic sensor • Infeed assist, hydraulically operated, consisting of table with extendable tongue and upper bending roller Roll feed Strip width: max. 600 mm Design features: • Rollers hardened, ground and chrome plated • Driven by gear motor • Upper roller can be hydraulically lifted • Height adjustment hydraulic • Lateral strip guide at the infeed with handwheel • Roller basket Further features: • Pneumatically swiveling loop bridge between straightening machine and feeder • Safety fence around the complete system • Decoiler and straightener mounted on a common base frame • Various spare rollers for the straightener The complete system is still powered on and can be inspected at the seller's site!!

Leto izdelave: 2023, stanje: rabljeno, Sheet width: 300 mm Coil weight: 1 t Coil inner diameter: 375–550 mm Coil outer diameter: 1600 mm Machine weight: approx. 0.5 t Space requirement: approx. 1500 x 1500 x 1900 mm Hydraulic expansion Loop control 6x limit arms Safety device Machine number: 35223 Gbjdpjlp U Tbsfx Anfol

Stanje: rabljeno, Leto izdelave: 1992, številka stroja/vozila: 120 4687, Press force: 80 t Adjustable ram stroke: 4 - 60 mm Ram adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Distance between uprights (L-R): 800 mm Table height above floor: 1150 mm Table clamping area approx.: 780 x 640 mm Ram clamping area approx.: 800 x 460 mm Die opening in table: 690 x 170 mm Strokes per minute: 30 - 300 min-1 Power requirement: 21 kW Height above floor approx.: 2900 mm Machine weight approx.: 12 t Control: Siemens S5 Standard equipment: Roll feeder Type WAV - RDS 2E 1125 Max. strip width: 310 mm Gbsdpfsuqc I Asx Anfol Strip thickness: 0.3 - 3 mm Cross-section of strip: 630 mm² Feed speed: 80 m/min Roll diameter: 125 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 1203697, Used stamping press Manufacturer: Haulick & Roos Model: RVD 8/800 NS Press with adjacent control panel: Haulick & Roos RVD 80-800NS Eccentric press with double connecting rods and 4-point mounted eccentric shaft No.: 1203697 Year of manufacture: 1990 Pressing force: 800 kN Speed: 30–300 strokes/min Drive: 26 kW Ram stroke: 4–60 mm Ram adjustment: 80 mm Table: 800 x 640 mm Gsdpfsudn Utsx Anfsbl Pass-through hole: 780 x 60–160 mm Table height above floor: 1240 mm Upright width: 780 mm Lateral upright distance: 350 mm Shut height (max. stroke bottom/ram top): 300 mm Space requirement press (LxWxH): 3200 x 1700 x 3000 mm Control cabinet (LxWxH): 1800 x 400 x 1900 mm Weight: 12,000 kg Decoiler: Eigl 2527-90 Motorized: No Straightening unit with loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300 mm Max. thickness: 3 mm Number of rollers: 5 Feeder: Haulick & Roos RS 260/120°/2727 Max. feed length: 260 mm Max. width: 260 mm Max. thickness: 3 mm Feed speed: 40 m/min Material cross-section up to 800 mm?

Leto izdelave: 1994, stanje: rabljeno, Bandwidth: 20–80 mm Material thickness: 0.3–1.5 mm Speed: 0–40 meters/min Working direction: left to right Straightening rollers: 20 pieces, diameter 30 mm Gjdpfx Anjdc Ez Hefjbl Decoiler load capacity: 300 kg Expansion range: 200–540 Outer diameter: 1000 mm Braking: pneumatic

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 22,06 kW (29,99 KM), prebijalna sila: 250 t, Eccentric press EBU, suitable for insertion work, UV-tested Gedpfjv T Dapox Anfobl Stroke adjustment from 10 to 140 mm Ram adjustment 80 mm Stroke rate 50 strokes/min.