Avtomatski stroj za izsekovanje

Haulick&Roos ROP 2500-3000

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150 583, skupna višina: 3.975 mm, nastavitev hidravličnega cilindra: 125 mm, vgradna višina: 410 mm, višina mize: 1.220 mm, skupna širina: 2.725 mm, skupna dolžina: 3.510 mm, dolžina mize: 1.500 mm, širina mize: 1.200 mm, stiskalna sila: 200 t, višina krmilne omare: 2.200 mm, dolžina elektro omare: 340 mm, širina krmilne omare: 600 mm, vrsta vhodnega toka: trifazni, razmak između stupova: 900 mm, razdalja med stranskimi nosilci: 900 mm, razdalja med stojali: 1.520 mm, skupna masa: 3.700 kg, leto zadnje generalne obnove: 2025, ATTENTION: The machine sustained transport damage and will undergo a complete mechanical and electrical overhaul before delivery in 2025/2026. Knjdpfjw H Arvsx Abhjd Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Slide adjustment: 125 mm Strokes per minute: 30 - 180 Die installation height: 410 mm Table dimensions: 1500 x 1200 mm (The press will be delivered with a new table plate, T-slot design can be freely selected) Slide dimensions: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, year of manufacture: 2020

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Pressing force: 2,000 kN Table area: 2,300 x 1,100 mm (W x D) Die opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Side passage: 740 mm Installation height: 550 mm (stroke bottom, adjustment top) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Design features: • Control system Siemens + Beckhoff • 8-point sliding guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Control system Siemens + Beckhoff • Beckhoff panel for visualization • T-slots in table and ram (28mm, 300mm spacing) • Vibration-damping machine feet • 4 pcs. tool clamps + 4 pcs. cam outputs • Ram with 20mm wide central groove • Hydraulic tool clamping device on table and ram • Hydraulic roll blocks for tool change Strip feeding line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 – S Load capacity: 5,000 kg Strip width: 100 - 600 mm Expanding range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion via sliding wedges • Back support disc and 3 pcs. detachable guide arms at front • Hydraulically operated and driven hold-down roller, lateral adjustment via handwheel • Loading saddle (stationary, decoiler moves hydraulically), lift height 770 mm with 4 pcs. limiting rods Straightening machine Type: RMBMZ 50.600 UF Strip width: 40 - 600 mm Strip thickness: 0.5 – 4.0 mm Straightenable cross-section: 1,200 mm² Number of rollers: 9 pcs. Straightening roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Design features: • Rollers hardened, ground and hard-chrome plated • Drive of lower straightening rollers and feed rollers by gear transmission • Motorized adjustment of roller stand via motors, setting accuracy 1/100 mm, values can be saved • Upper rollers can be lifted by 100mm • Feed roller pneumatically liftable • Lateral strip guide at inlet with handwheel and leadscrew • Exit roller basket and loop bridge Knsdpfx Abev T Anlshjd • Loop control by ultrasonic sensor • Infeed assist, hydraulically operated, consisting of table with extendable tongue and upper bending roller Roll feed Strip width: max. 600 mm Design features: • Rollers hardened, ground and chrome plated • Driven by gear motor • Upper roller can be hydraulically lifted • Height adjustment hydraulic • Lateral strip guide at the infeed with handwheel • Roller basket Further features: • Pneumatically swiveling loop bridge between straightening machine and feeder • Safety fence around the complete system • Decoiler and straightener mounted on a common base frame • Various spare rollers for the straightener The complete system is still powered on and can be inspected at the seller's site!!

Stanje: novo, Leto izdelave: 2025, Tlak 315 t Razmak med stojali 2800 mm Fiksni hod 35 mm Število hodov 100 - 250 hodov/min Vgradna višina (hod + zgornja nastavitev kladiva) 560 mm Stranski prehod med stojali 600 mm Knedpfjxcp Itex Abhed Površina mize 2700 x 1200 mm Prehodna odprtina v mizi 2450 x 450 mm Površina kladiva 2700 x 800 mm Teža 80,0 t Zahtevan prostor (ŠxGxV) 5,1 x 2,65 x 5,25 m