Merilna roka

FARO Platinum P12 7 Achsen

Stanje: rabljeno, Leto izdelave: 2008, Hodi osi: X os = 350 mm Y os = 250 mm Z os = 220 mm vključno z hladilnikom Popolnoma delujoč Hjdpfx Aow Swd Aeb Eefd

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2025, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 200 mm, merilno območje osi Y: 200 mm, merilno območje os Z: 200 mm, teža obdelovanca (maks.): 15 kg, trajanje garancije: 12 meseci, vrsta vhodnega toka: Klimatska naprava, potovalna razdalja osi X: 200 mm, pomik osi Y: 200 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, 3D Coordinate Measuring Machine Mahr MS2VT Used multisensor CMM with motorized zoom and active vibration isolation Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2025. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and application support. Delivery available with factory service or via forwarding agent, worldwide. Online or on-site demonstrations with customer parts on request, application consulting by accredited Profitech measurement laboratories during the project phase. Complete service: – Delivery, setup, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and instructional programs available, including online courses. Rental, leasing, or financing possible directly through Profitech, no financial institution required. Measuring device can be individually configured to meet customer requirements. • Measuring range per individual sensor: 200x200x200mm Hfjdpfodz Er Rox Ab Eod • Dimensions: 900x750x950mm • Weight: approx. 170 kg • Accuracy: E2 = 2.4 + L/150 [µm] • Retrofit 2024 • incl. USB camera with fixed focal length • incl. LED ring light • incl. calibration standard • incl. dual-monitor operation • incl. new Windows 10 • incl. Opticheck3D 5.0 analysis software (12 months free software updates) Manufacturer's sample image (sister device)

Stanje: dober (rabljeno), Leto izdelave: 2017, In this offer, you are purchasing used office furniture that is in good condition. The items were delivered in 2017 and are generally in very good condition due to minimal use. Items for Sale: We also offer workstation sets for €450 each. 1x Desk - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey tabletop Hedjiiv Ikspfx Ab Eefd - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - With armrests - Fully adjustable - Upholstery: Polo fabric, grey/black 1x Mobile Pedestal - Manufacturer: FM - 43.4 x 80 x 59 cm - One material drawer - 3 steel drawers with soft-close function - Lockable, incl. key Desks: • Approx. 10x desks by FM 1600 x 800 x 680 to 760 mm (continuously height-adjustable) in light grey. Frame made of aluminium. • Approx. 10x folding tables (can be used as desks) 1600 x 800 x 720 mm on castors, in light grey. Aluminium frame. • Approx. 2x round meeting tables, 1000 mm diameter, in light grey. Aluminium frame. • Approx. 4x high desks 1600 x 800 x 1300 mm in arctic white. Frame in white, aluminium. Chairs: • Approx. 10x Dauphin swivel chairs MagicShapeS elan with armrests, fully adjustable. Upholstery: Polo, black, base in black plastic. • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red. Chrome metal frame. • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue. Chrome metal frame. • Approx. 10x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in black. Frame in silver. • Approx. 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ocean blue. Frame in silver. • 12x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in red. Frame in silver. • 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ruby red. Frame in silver. Storage: • Approx. 16x mobile pedestals by FM 434 x 800 x 590 mm with one material drawer and 3 steel drawers. Carcase in light grey. Handles in aluminium. Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on the quantity purchased. We are happy to make you an individual offer. You can also purchase each piece of furniture individually. Condition: These are used items, which may show signs of use (minor scratches or yellowing). Packaging and Shipping: You are welcome to inspect everything during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Hfedpfxsw S Nn He Ab Esd Premer vretena: 200 mm Hod v osi x: 10000 mm Hod v osi y: 4000 mm Os z: 1500 mm Os W (vreteno vzdolžno): 1000 mm Območje vrtljajev vrtalnega vretena: 1 - 2000 vrt/min Mere nosilne puše: 600 x 530 mm Hitro vpenjanje vretena ISO: 60/50 Hitri pomik x - smer: 8000 mm/min Hitri pomik y - smer: 8000 mm/min Hitri pomik os Z: 5 m/min Skupna potrebna moč: 120 kW Teža stroja cca: 135 t Potreben prostor cca: 16,0 x 5,0 x 10,0 m s CNC krmiljenjem HEIDENHAIN iTNC 530 hidrostatična vodila x in y-os avtom. menjalec orodij s 40 mesti avtomatska pickup postaja za kotno glavo, univerzalno glavo in čelno ploščo vrtalna miza 3000 x 3000 mm, teža obdelovanca 60 t Os V: 2500 mm Transporter za ostružke in naprava za hlajenje

Stanje: dober (rabljeno), Leto izdelave: 2014, Velikost mize 3500 x 820 mm, Pomiki XYZ 3000 x 820 x 720 mm, Nosilnost mize 2500 kg, Konus vretena DIN 40, Hitrost vretena 12000 obr/min, Hedpfxow Nwt Eo Ab Esfd Moč vretena 22 kW, 30 ATC, Krmiljenje Mazatrol Matrix Nexus, hlajenje skozi vreteno, transporter ostružkov.

Stanje: rabljeno, Leto izdelave: 2007, Control system: Siemens Sinumerik 840 D Weight: 57,000 kg Operating voltage: 400 V Gleason-PFAUTER CNC Gear Hobbing Machine P 2400/2800 For the hobbing of cylindrical and worm gears as well as all other regularly occurring hobbed profiles and shapes on cylindrical workpiece circumferences. Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing of cylindrical gears for a wide range of industries: wind energy, industrial gearboxes, mining and shipbuilding, gear manufacturing, and many more. The drive power range is designed with future tool developments in mind. Of course, the hobbing head drive is also backlash-free. These machines are particularly suitable for the use of state-of-the-art cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for both dry and wet machining and is equipped for both methods with the appropriate chip conveyor. The machine is equipped with an internal profile milling head as a motor-driven milling head. --> Working area and technical data Workpiece nominal diameter: 2,400 mm --> Maximum machinable diameter: approx. 2,800 mm --> Minimum/maximum distance between cutter and workpiece axis: 100/1,200 mm --> Maximum axial slide travel (special version): 1,300 mm --> Maximum clampable cutter (internal milling head): Hsdpewzyp Ijfx Ab Eefd --> Maximum diameter: 440 mm --> Maximum cutter width: 90 mm --> Swivel range of internal profile milling head/vertical axis: +/- 15° --> Cutter arbor taper: HSK-B160 --> Maximum cutter traverse path: 300 mm --> Table diameter: 2,500 mm --> Index gear diameter: 2,200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40,000 kg --> Max. feed and rapid traverse speeds: --> Axial (Z-axis): 4,000 mm/min --> Radial (X-axis): 3,000 mm/min --> Tangential (Y-axis): 3,000 mm/min --> Cutter cooling lubrication system/Electric centrifugal pump: approx. 150 l/min --> Discharge height of elevated magnetic chip conveyor: 1,600 mm --> Raised main column: 1,300 mm axial slide travel --> Internal profile milling head as motorized milling head instead of standard motorized milling head --> Max. machinable profile depth in steel with approx. 600 N/mm² tensile strength: approx. 65 mm --> Infinitely variable cutter speed: 50 – 150 rpm --> Max. cutter diameter: 440 mm --> Min. cutter root circle diameter: 310 mm --> Max. cutter width: 90 mm --> Min. internal diameter at 0° helix angle: 800 mm *) --> Max. workpiece height at 0° helix angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, doseg roke: 1.300 mm, Popoln paket za vašo avtomatizacijo varjenja z najnovejšo robotsko serijo UR10e – prosimo, ne kupujte več serije CB. Želite svojo varilnico avtomatizirati s Cobotom, da boste kos prihodnjim izzivom? Potem je rešitev OH-au2mate Cobot Welding Solutions z varilnim izvorom Lorch prava izbira za vas! Ta popolno usklajen paket združuje: - visokokakovostno robotsko tehnologijo vodilnega podjetja na trgu Universal Hfsdpet S U Ausfx Ab Esd - inovativno varilno tehnologijo Lorch - intuitivno programsko opremo za upravljanje Točen paket zajema: robot UR10e pripravljen za varjenje, upravljalne elemente, nosilec gorilnika, varilni izvlečni gorilnik Translas 8XR, varilni izvor Lorch S5 z 400A.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 100 h, Specializirani smo za obnovo puhal, kompresorjev in vakuumskih črpalk. Servisiramo opremo proizvajalcev kot so: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, Tuthill. Nudimo tudi najem puhal in kompresorjev. Delujemo po vsej Evropi in zunaj nje. Hjdpfxon Tntqo Ab Ejfd

Stanje: novo, Leto izdelave: 2026, Overhauled, as-new machine, modernized to meet the legally required safety standard “state of the art” according to operational safety regulations of the professional associations. Control Cabinet Electronics Installation of a new CE-compliant control cabinet in accordance with the latest statutory regulations of the professional associations: BGVA 3 / DIN EN 60204-1 new machine standard. Optional: complete machine in CE execution. A CE declaration of conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the legal manufacturer. This ensures the machine complies with the OPERATING SAFETY REGULATION (BetrSichV). The machine’s year of construction is considered to be the delivery date. Standards applied: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1. Control 3-axis FPS Aktiv digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed stages for maximum torque / milling performance Feed 5 to 500 mm/min, infinitely variable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z: 800 / 300 / 400 mm Table Rigid angle table, 1000 x 440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head Hjdeh Sptnepfx Ab Esfd • Dividing head • Steady rest • etc.

Leto izdelave: 2000, stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Y-axis as longitudinally movable measuring portal: 1,600 mm X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) Hedot Hw Nyepfx Ab Ejfd • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds • Reference sphere for setup on the table, workstation, various clamping devices, etc. Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.