Prehodne vrtalne stroje nakup rabljenega (70)

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 No. 2 pass-through motorized conveyor belts Crjdpsivawpsfx Afwji No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Csdpfx Asidqf Refweri Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), Electronic control RT 483 No. 2 motorized throughfeed conveyor belts Feed speed (approx. 55 m/min) No. 2 horizontal drilling supports No. 1 drilling unit for each horizontal drilling support (1 x 1.5 HP) No. 20 spindles for each horizontal drilling unit Max. working width (mm): 3200 Min. working width (mm): 220 No. 7 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support (2 x 1.8 HP) No. 4 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports (2 x 1.8 HP) No. 4 upper vertical workpiece clamps No. 2 continuous screws for chip removal Digital display of position data (axis) Credpfx Ajfz Nanefwji Total connected load (kW): 35.1 CNC controls the movement (X-axis) of the horizontal drilling supports CNC controls the movement (Y-axis) of the stops

Stanje: zelo dobro (rabljeno), PC control type NC 400 (software) Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 – Min. working width (mm) 205 (approx.) Crodpfxogk T Tte Afwsi Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 No. 4 upper vertical drilling supports Spindles per unit of upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axis) Total connected load (kW) 48 The CNC control manages the movement (X-axis) of the horizontal drilling supports. The CNC control manages the movement (Y-axis) of the stops.

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Credsh Ryhnjpfx Afwsi Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 2.800 mm, dolžina pomika po osi Y: 1.000 mm, dolžina podajanja os Z: 50 mm, hitrost pomika os X: 140 m/min, hitrost podajanja osi Y: 90 m/min, hitrost podajanja os Z: 50 m/min, dolžina obdelovanca (maks.): 2.800 mm, širina obdelovanca (maks.): 1.000 mm, vrsta upravljanja: CNC krmiljenje, Visokozmogljiv CNC vrtalni center KDT KD-610NHZ za šeststransko obdelavo obdelovancev. Takoj na voljo iz zaloge. Zgornje in spodnje vrtalne enote. Natančna obdelava in velika hitrost. Idealno za proizvodnjo korpusnega pohištva. Ogled stroja možen po dogovoru. Codpoymz Alefx Afwjri

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Crodpfx Afedz Uk Tswsi Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36

Stanje: dober (rabljeno), Leto izdelave: 2002, Postaja 1: Rezanje komponent na dolžino Crodpfjy Hv Uqjx Afwsi Postaja 2: Čelno vrtanje v rastru 27, 32 ali 60 mm, globina 95 mm Postaja 3: Dodatno čelno vrtanje ali izpihovanje izvrtin s postaje 1 Postaja 4: Preverjanje upogiba Obdelava letvic: možna dolžina med cca 400/450 mm do cca 2500 mm

Stanje: zelo dobro (rabljeno), CNC-controlled flexible automatic through-feed boring line for milling, drilling, and dowel insertion Min/Max workpiece (panel) width (X-axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z-axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length-depth (Y-axis) with FTT: 140 / 1550 mm (or 800+800) Crjdpfx Afjyhqa Aswoi A) Powered roller conveyor "RBO" with 90° workpiece rotation unit B) Portal CNC-controlled through-feed boring machine "BIESSE" FTT 800 (for milling and drilling) Zone A: 2 electrospindles ISO 30 (each 4.5 kW) with tool magazine with 3 slots each. Zone B: 2 preparations for the installation of 2 additional electrospindles 4 top drilling units (total 128 vertical spindles + 16 horizontal spindles on the Y-axis) 2 tool magazines (turret) with 60 slots each for spindles (2 x 60 = total 120) C) Transfer connection with turner (180° overturn, top side down) "RBO" Ribaltatore D) Portal CNC-controlled through-feed boring machine "BIESSE" FTT 800 R8 (for milling and drilling) 2 horizontal drilling units (1 right + 1 left) with 4 heads each with 18 spindles (36R+36L), total 72 Zone A: 2 electrospindles ISO 30 (each 4.5 kW) with tool holder magazine, 3 slots each. Zone B: 2 preparations for the installation of 2 additional electrospindles 4 top drilling units (total 128 vertical spindles + 16 horizontal spindles on the Y-axis) 2 tool magazines (turret) with 60 slots each for spindles (2 x 60 = total 120) E) "BIESSE" RD dowel insertion unit 2 horizontal boring units (1 right + 1 left) each with 5 insertion nozzles (5LH + 5RH), total 10 nozzles F) Dust extraction and cleaning machine "WANDRES"

Stanje: novo, Šeststranska vrtalna naprava Proizvajalec: Quick Tip: KQ-62Lite Nova naprava Tehnični podatki: - Dolžina obdelovanca: 70 – 2.400 mm - Debelina obdelovanca: 9 – 60 mm - Širina obdelovanca: 30 – 1.220 mm - Najmanjša velikost obdelave: 50 x 70 mm - Hitrost premika v smeri X: 138 m/min Crodpezvgndjfx Afwei - Hitrost premika v smeri Y: 90 m/min - Hitrost premika v smeri Z: 28 m/min - Nadzorni sistem stroja: Higerman - Višina delovne mize: 890 mm - Vreteno: 2 x 3,5 kW, 18.000 vrt/min, ročna menjava orodja - Vrtalna enota: Zgoraj 9 vertikalnih in 4 horizontalnih / Spodaj 7 vertikalnih - Natančnost pozicioniranja: 0,03/1000 - Natančnost ponavljanja: 0,02/1000 - Priključna moč: 25,8 kW Dodatna oprema (opcija) - Naprava vključno s sistemom za povrat obdelovancev Druge konfiguracije so na voljo na zahtevo.

Stanje: zelo dobro (rabljeno), PC kontrola tipa NC 500 (Software Tooling System) Br. 2 motorizovanih transportnih traka Br. 2 horizontalnih nosača za bušenje Br. 2 bušaće jedinice za svaki horizontalni nosač Cedjyvrrqjpfx Afwsri Maks. radna širina (mm) 3200 - Min. radna širina (mm) 205 (približno) Br. 8 donjih vertikalnih nosača za bušenje Br. 2 bušaće jedinice za svaki donji vertikalni nosač Br. 4 gornjih vertikalnih nosača za bušenje Br. 2 vretena za svaku bušaću jedinicu na gornjem nosaču Br. 5 gornjih vertikalnih stega za radne komade Br. 2 beskonačna puža za odvod strugotine Digitalni prikaz pozicijskih podataka (osa) Ukupna priključna snaga (kW) 48 CNC kontrola upravlja pomeranjem (osa X) horizontalnih nosača za bušenje CNC upravlja pomeranjem (osa X) transportnih traka CNC kontrola upravlja pomeranjem (osa Y) graničnika CNC upravlja pomeranjem (osa Z) svih vertikalnih nosača za bušenje

Stanje: zelo dobro (rabljeno), Portal machine Crsdpfedg Itnex Afwji Movable table (workpiece), movable working head (horizontal workpiece) Control: Power Control, WoodWOP software Workpiece drive with no. 3 transport belts Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 50 Chip conveyor belt Total connected load (kW): 60 WORKING UNITS (VERTICAL): Drilling units with vertical spindles: No. 6 Independent vertical drilling spindles: No. 40 x 6 (total No. 240) Drill head power: No. 6 x 2.7 kW WORKING UNITS (HORIZONTAL): Drilling units with horizontal spindles: No. 4 (4 x 2.7 kW) Horizontal drilling spindles - right side: No. 13 x 2 (total No. 26) Horizontal drilling spindles - left side: No. 13 x 2 (total No. 26) High-pressure glue injection and dowel insertion nozzles (right side): No. 8 High-pressure glue injection and dowel insertion nozzles (left side): No. 8 Dowel magazine for automatic dowel feeding: No. 2

Stanje: rabljeno, Leto izdelave: 2007, Dražba vrtalne linije s sledečimi komponentami: PRIESS EIN-Igel (vertikalni sistem za shranjevanje) PRIESS BAT-DTW-CNC PRIESS BAT-DTW-CNC PRIESS BMA DLS-CNC WANDRES CVT 05/1000 PRIESS transportni sistem TEHNIČNE PODROBNOSTI Vertikalni sistem za shranjevanje Maksimalna širina plošče: 500 mm Maksimalna dolžina plošče: 1.500 mm CNC vrtalni stroj Način obdelave: vrtanje Delovno območje osi X: 2.500 mm Delovno območje osi Y: 800 mm Maksimalni premer vrtane luknje: 26 mm Število vrtalnih enot: 4 Skupno število vrtalnih vreten: 88 Vrtalna enota 1 Položaj: Zgoraj Vertikalna vrtalna vretena: 23 Vrtalna enota 2 Položaj: Zgoraj Vertikalna vrtalna vretena: 23 Vrtalna enota 3 Položaj: Spodaj Vertikalna vrtalna vretena: 12 Vrtalna enota 4 Položaj: Spodaj Vertikalna vrtalna vretena: 20 CNC vrtalni in vstavljalni stroj (Priess BAT-DTW-CNC) Način obdelave: vrtanje in vstavljanje Delovno območje osi X: 2.500 mm Delovno območje osi Y: 800 mm Število delovnih območij: 1 Skupno število vrtalnih vreten: 49 Število vrtalnih enot: 4 Vrtalna enota 1 Položaj: Zgoraj Horizontalna vrtalna vretena v smeri osi X: 8 Vrtalna enota 2 Položaj: Zgoraj Horizontalna vrtalna vretena v smeri osi X: 17 Vrtalna enota 3 Položaj: Zgoraj Vertikalna vrtalna vretena: 12 Vrtalna enota 4 Položaj: Zgoraj Vertikalna vrtalna vretena: 12 Enota za vstavljanje Število enot za vstavljanje: 1 Število injektorjev: 10 Število zaloznikov: 1 Material za vstavljanje: leseni čepi CNC vrtalni in vstavljalni stroj (BMA DLS-CNC) Način obdelave: vrtanje in vstavljanje Delovno območje osi X: 2.500 mm Delovno območje osi Y: 800 mm Število nadzorovanih osi: 3 Moč glavnega elektro vretena: 4,4 kW Število vreten za frezanja: 3 Število enot za vstavljanje: 2 Vreteno za frezanje 1 Položaj: Zgoraj Število nadzorovanih osi: 3 Moč motorja: 4 kW Vreteno za frezanje 2 Položaj: Zgoraj Število nadzorovanih osi: 3 Moč motorja: 4 kW Crsdpfx Ajzmtpvjfwji Vreteno za frezanje 3 Položaj: Zgoraj Število nadzorovanih osi: 3 Moč motorja: 4 kW Enota za utore Položaj: Zgoraj Enota za vstavljanje 1 Število injektorjev: 1 Število zaloznikov: 1 Enota za vstavljanje 2 Število injektorjev: 1 Število zaloznikov: 1 Stroj za brušenje Maksimalna delovna širina: 800 mm Maksimalna širina obdelave: 800 mm Maksimalna dolžina obdelave: 2.500 mm Premer krtače: 160 mm Valjčni transporter Maksimalna širina plošče: 800 mm Maksimalna dolžina plošče: 2.500 mm Podajalnik plošče: motoriziran trak

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: nepreverjeno, dolžina obdelovanca (maks.): 2.500 mm, širina obdelovanca (maks.): 700 mm, število vreten: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of storage units: 2 Cedpfxoyq Irho Afweri Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-direction: 6 Number of spindles for horizontal drilling in X-direction: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor output (vertical drilling): 3 kW Motor output (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents for descriptive purposes only. The buyer has the right to inspect the goods before collection, and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6106

Stanje: novo, Leto izdelave: 2024, Boring and inserting machines Rilesa Vlg 2200, new, March 2024 Make: Rilesa Model: Vlg 2200 Description: Condition: new Year: 2023 Start-up type: to be agreed Shipping cost: Customer protection Delivery terms: SELF-COLLECTION Category: Machine tool equipment in Poland Subcategory: Drill bits Subcategory 2: Drilling machines Description DRILLING MACHINE WITH MAGAZINE FOR 8 DRILLING UNITS – TWO FRONT RIGHT AND LEFT, 3 UPPER AND 3 REAR Year: 2024 Cjdjgbpmhepfx Afwjri The machine can be equipped with additional drilling heads. We are also a manufacturer of such heads in various spindle configurations and custom spindle quantities. Customised according to individual requirements.

Stanje: zelo dobro (rabljeno), Automatic Throughfeed Drilling and Dowel Inserting Line (2 machines), consisting of: W12054A) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 kW and each with 22 drilling spindles) - 5 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 5 upper vertical workpiece clamps - 2 (endless) screws for chip extraction NC control (software module Tooling System) for both machines. Crjdpfx Afovnq Txswsi W12054B) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT - 2 powered throughfeed belts, feed speed up to 75 m/min - 2 horizontal drilling supports (each with 8 horizontal supports – glue application and dowel insertion tools) - 3 lower drilling supports (each with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 1 upper drilling support (with 2 split and reversible drilling heads, each 2.3 kW and equipped with various drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. Crjdpedfgg Ijfx Afwei B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: novo, 6-stranska vrtalna naprava Proizvajalec: Quick Tip: KQ-63E Nova naprava Tehnični podatki: - Dolžina obdelovanca: 70–2800 mm - Širina obdelovanca: 50–1220 mm - Debelina obdelovanca: 9–60 mm - Minimalna velikost obdelovanca: 70 x 50 mm - Hitrost premika v smeri X: 135 m/min - Hitrost premika v smeri Y: 90 m/min - Hitrost premika v smeri Z: 25 m/min - Posamezno upravljani vretena: Zgoraj 2 x 12 vertikalnih, 4 horizontalnih / Spodaj 1 x 7 vertikalnih - Nadzorni sistem stroja: Higerman (nemščina) - Vreteno za rezanje zgoraj: 9 kW, 24000 vrt/min - Menjalnik orodja zgoraj: 5-nastavna - Vreteno za rezanje spodaj: 3,5 kW, 18000 vrt/min - Motorji: brezkrtačni servomotorji - Natančnost pozicioniranja: 0,03/1000 - Natančnost ponavljanja: 0,02/1000 Neobvezna oprema: - Naprava z avtomatskim vračanjem obdelovanca Cedpfxezvgn De Afweri Hitro najdeno Ponudba strojev Naročite se na novice Odjavite se od novice Kontaktirajte nas Pregled

Stanje: zelo dobro (rabljeno), PC control unit type NC 400 (with software for managing work cycles) No. 2 continuous motorized conveyor belts Max. working width (mm): 3200 – Min. working width (mm): 205 (approx.) No. 2 horizontal drilling supports No. 2 drilling units per horizontal drilling support Spindles per horizontal drilling unit (qty): 11 No. 4 lower vertical drilling supports No. 2 drilling units per lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles per drilling unit on upper drilling support No. 2 upper vertical workpiece clamps No. 2 screws (continuous) for chip removal Crsdsi D D Tfjpfx Afwji Digital display for position data (axes) Total connected load (kW): 25 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops. OPTION: front loader (for narrow parts: min. 60 mm – max. 260 mm)

Stanje: zelo dobro (rabljeno), CNC-controlled Throughfeed Drilling and Dowel Insertion Line (3 machines) J06031) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps + 2 (endless) screw conveyors for chip removal Crsdpfx Ajg Urn Ejfwji J06032) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 2 horizontal drilling units (each with 2 drilling heads, each 2.3 kW, each with 11 drilling spindles) - 6 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 6 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal J06033) THROUGHFEED DRILLING MACHINE “BIESSE” KERNEL, with CNC - 4 lower drilling units (each with 2 split and reversible drilling heads, each 2.3 kW, each with different drilling heads) - 4 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal CNC Control (Tooling System software + Woodmaster) CNC controls the movement (X-axis and Hv) of the 2 horizontal drilling units CNC controls the movement (X-axis) of the vertical drilling units CNC controls the movement (axes Y1 and Y2) of the drilling units + (Y-axis) of the stops CNC controls the movement (X-axis) of the workpiece clamps CNC controls the movement (X-axis) of the feed conveyors