Težke regalne police nakup rabljenega (235)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: Lodpfx Abjmhh Dhsxoac - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) Ledomhh Dzspfx Abxoac - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles Lasdpjh R Taqsfx Abxjc - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Lsdpfsmhh Anex Abxoac Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards Ledpfjguk A Hsx Abxoac - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors Lsdpfxomhhy Ns Abxeac 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. Lsdpjguk Dkefx Abxeac The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Lsdsguk Dvjpfx Abxjac - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. Lodsmhh Dtjpfx Abxoac When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: rabljeno, Nedcon paletový regal pribl. 3,1 tm, rabljen 🧰 Lastnosti izdelka • Proizvajalec: Nedcon • Barva: modra • Stanje: rabljen, glej slike • Okvirji: 2 kosa predmontirana 500 x 105 cm • Širina okvirja: 10 cm • Prečke: 8 kosov s svetlo širino 290 cm • Varovanje: 16 kosov pocinkanih varnostnih zatičev • Pritrditev: 8 kosov Hilti betonskih sider • Nosilnost: 2.000 kg na nivo • Poljska nosilnost: 12.000 kg • Vložene police vključene! 💰 Cena: 440 € neto brez DDV. • Količinski popust: po dogovoru • Stroški pošiljanja: po vsej Evropi po dogovoru • Dobavni rok: takoj dobavljivo • Ogled in prevzem: možno kadarkoli po dogovoru Stalno na zalogi več kot 5.000 tm paletnih regalov različnih proizvajalcev. Laedjy D Nybspfx Abxoc (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do vmesne prodaje! Glejte naše Splošne pogoje, vse cene brez DDV iz skladišča.)

Stanje: rabljeno, Traverse: 2700x120x50 mm, 63 ks Lsdpfxsh Izr Uj Abxsac Rámy: 5200x1000x95 mm, 17 ks 4600x1000x90 mm, 4 ks 2300x1000x95 mm, 2 ks Pokud potřebujete regály nebo příslušenství v jiných sestavách či provedeních, kontaktujte nás prosím. Nabízíme kompletní sortiment nových i použitých regálů a příslušenství a rádi Vám pomůžeme s plánováním. K dispozici další příslušenství jako např.: Ochrana rámu, rohů a nájezdů, zabezpečení proti protlačení, dřevotřískové desky, roštové podlahy, zadní mříže, hloubkové nosníky apod. Doprava: Na požádání Vám rádi sdělíme náklady na dopravu na základě PSČ, místa a požadovaného množství zboží. Další služby: Plánování, montáž/demontáž regálů, výkup/prodej Změny a chyby v technických údajích, informacích a cenách, jakož i mezitímní prodej vyhrazeny!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.700 mm, skupna višina: 3.000 mm, Za prodaju je visokokvalitetan i izuzetno stabilan sistem teških regala marke Katschotec. Regal je idealan za profesionalno skladištenje alata, mašina, kutija, rezervnih delova ili teških materijala – i za privatnu i za komercijalnu upotrebu. Tehničke specifikacije: - 3 stabilna stojeća rama - Dimenzije rama: oko 300 cm visina x 110 cm dubina Ljdpezabkijfx Abxoac - 16 robusnih traversa - Dužine polica: moguće kombinacije 180cm x 270cm - Dozvoljena nosivost po polici: 3.000 kg - Dozvoljena ukupna nosivost po polju: 9.000 kg - Masivna industrijska verzija - Velika nosivost po nivou - Pocinčana, odnosno izdržljiva metalna konstrukcija - Idealno za magacin, radionicu, podrum, garažu ili arhivu. Regal je u dobrom polovnom stanju sa uobičajenim tragovima korišćenja. Tehnički je potpuno ispravan i odmah spreman za upotrebu. Regal je već demontiran.

Stanje: dober (rabljeno), Okvirji: 8860x1050x80 mm 34 kosov 3000*1050 mm 7 kosov Prečke: 1860*75*45 mm (2800 kg/polica) 352 kosov 2760*115*40 mm (2400 kg/polica) 26 kosov 2700*100*50 mm (2400 kg/polica) 22 kosov Možen je tudi nakup delnih količin. Če potrebujete regale ali dodatno opremo v drugih sestavah ali izvedbah, nas kontaktirajte. Ledpfjd Hbqnsx Abxoac Nudimo celovit program novih in rabljenih regalov ter dodatne opreme, z veseljem pa vam pomagamo pri načrtovanju. Priprava individualne ponudbe je za nas samoumevna. Dostava: Prosimo, povprašajte za stroške prevoza tako, da navedete vašo poštno številko, kraj in želeno količino artiklov.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0729389557300, nosilnost na odsek shranjevanja: 160 kg, skupna dolžina: 162.000 mm, skupna višina: 2.500 mm, višina police: 2.500 mm, dolžina police: 162.000 mm, višina okvirja: 2.500 mm, obremenitev na par nosilcev (maks.): 160 kg, širina okvirja: 600 mm, število vrst polic: 23, 11 dvojnih vrst + 1 posamezna vrsta policnega regala, sendzimir pocinkan, vsak s 7,03 m dolžine, 2,5 m višine, 0,6 m globine, vsak s 7 polji s čisto širino 0,97 m. Vsako polje ima 7 polic, nosilnost police je 160 kg. - 184 okvirjev (FR25060) predmontiranih 2500x600 - 1127 polic (FB097604) 970x600x40 - 88 spojkov za dvojne vrste (FBDV-Set) - 22 dvojnih križnih vez (VK2510) - 23 oznak za nosilnost (BSMcP) Okvirji so predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dostava na gradbišče / mesto montaže - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - dobava po celotnem območju Republike Nemčije, razen otokov! Dostava v države EU po individualnem dogovoru. Lasdpfxjyy I Ens Abxjc

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0729389557300, nosilnost na odsek shranjevanja: 160 kg, skupna dolžina: 192.000 mm, skupna višina: 2.000 mm, višina police: 2.000 mm, dolžina police: 192.000 mm, višina okvirja: 2.000 mm, obremenitev na par nosilcev (maks.): 160 kg, širina okvirja: 600 mm, število vrst polic: 32, 16 dvojnih vrst policnega regala, sendzimir pocinkano, vsaka dolžine 6,03 m, višine 2 m, globine 0,6 m, vsaka s 6 polji, neto širina polja 0,97 m, vsako polje s 6 policami, nosilnost police 160 kg. Lodpeyyvq Sofx Abxjac - 224 okvirjev (FR20060), predmontiranih 2000x600 - 1152 polic (FB097604) 970x600x40 - 96 povezav za dvojne vrste (FBDV-Set) - 32 dvojnih križev (VK2010) - 32 oznak za nosilnost (BSMcP) Okvirji predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dobava prosto gradbišče / montažno mesto - razklad tovornjaka s strani kupca z lastno dvižno napravo - dobava po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v državah EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 14.200 mm, višina police: 4.500 mm, dolžina opore: 2.700 mm, dolžina police: 14.100 mm, obremenitev na par nosilcev (maks.): 3.050 kg, širina okvirja: 1.100 mm, število vrst polic: 1, 1 row pallet racking (M45112711-3+) Length: 14.1 m, Height: 4.5 m, Depth: 1.1 m 5 bays, each 2.7 m wide 3 beam levels per bay, compartment load: 3050 kg Complete with mesh shelves, 1000 kg load capacity each Scope of supply: Ljdpfxsv Unxle Abxsac - 6 frames (RM3511 - RAL5019) - 12 base plates, shims, mounting hardware - 24 floor anchors (ZZBA1210) - 30 single crossbeams (T27114 - RAL2008) - 45 mesh shelves (ZG8811010004) - 1 impact guard / collision protection (ZRS40901) - 1 load capacity sign (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Free delivery to site / installation location - Unloading from truck to be carried out by the buyer using own forklift deliveries throughout Germany (except islands). Deliveries to EU countries by individual agreement.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.500 mm, skupna višina: 4.200 mm, skupna širina: 860 mm, Težkonosilni izvlečni regal Lista Tip regala M 210 za paletne prostore 420 x 86 x 250 cm 1x osnovni regal (ŠxGxV) 145x86x250 cm 2x dodatni regal (ŠxGxV) 137x86x250 cm 12x izvlečnih okvirjev, nosilnost vsakega 1000 kg Laedpfx Abey Iv U Texoc SAMOSTOJNA DEMONTAŽA JE POTREBNA

Stanje: skoraj kot novo (rabljeno), višina police: 7.800 mm, Used Meta frames for sale. The frames have the following dimensions: - 7800 mm length - 1100 mm depth Price per unit: €170 plus VAT. Available quantity: 150 Racking Systems | Sales • Assembly • Dismantling • Repairs | MM Lagertechnik We are happy to provide you with a non-binding quote—customized to your requirements. Our services include: ✔ Sale of warehouse racking systems ✔ Assembly & dismantling ✔ Repairs & maintenance ✔ Purchase of used racking systems ✔ Racking inspections in accordance with regulations ✔ Training in warehouse technology Ledpfoy Itvzex Abxsac We support you with the planning, delivery, and professional installation of your storage and operational equipment—reliably and efficiently. Thanks to our many years of experience in warehouse technology, we serve: - Small businesses - Medium-sized companies - Industrial enterprises from various sectors With us, you receive everything from a single source—from planning to implementation. Note: This advertisement does not constitute a binding offer. After you contact us, you will receive an individual quote tailored to your requirements.

Stanje: rabljeno, Separator element for pallet racking system. Suitable for 1000, 1050, or 1100 mm deep frame. Arm length: 500 mm For 2700 mm bay with 6 arms: 24 pcs – 67 EUR + VAT/pc For 2700 mm bay with 10 arms: 46 pcs – 89 EUR + VAT/pc For 1800 mm bay with 7 arms: 4 pcs – 51 EUR + VAT/pc Laodpfx Abjk Tzzloxjc If you require racking or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used racking as well as accessories, and we are happy to assist you with your planning. Further available accessories: Frame, corner and impact protection, push-through protection, chipboard panels, mesh shelves, mesh back walls, depth rails. Shipping: Please inquire about shipping costs, specifying your postcode, location, and desired quantity. Additional services: Planning, racking assembly/disassembly, purchase/sale Subject to technical changes, errors, and prior sale!

Stanje: rabljeno, Serija prečk in lestev za regal za palete 95 lestve dolžine 6 m (4 m + 2 m – varjene) Razmik med lestvami: 1,10 m Serija 4 prečk dolžine 3 m Serija 714 prečk dolžine 2,7 m Serija lesenih desk debeline 5 cm, primernih za skladiščenje palet s papirjem za tiskarstvo. Ljdpfxsyg D Tao Abxsac Razstavljanje na lokaciji – 4700 Eupen – Belgija

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, nosilnost na odsek shranjevanja: 1.000 kg, skupna dolžina: 37.030 mm, skupna višina: 4.310 mm, skupna širina: 4.590 mm, višina police: 4.310 mm, We are offering a used, fully functional flow racking system with a two-level structure (ground floor and upper level) for sale. This system is perfectly suited for storage and order picking according to the FIFO principle (First In – First Out) and is ideal for logistics, shipping, or production companies. The rack is optimized for cartons measuring 600 x 400 x 250 mm, with a total capacity of 3,000 cartons. Dimensions The total length of the system is approx. 37 m, divided into two sections: one continuous block (approx. 20 m), a stairway element (approx. 1.3 m), and a second block with a passage (approx. 15.6 m). The total depth is approx. 4.6 m, consisting of two rack row depths of 1.3 m each and a central working aisle of approx. 2 m. The beam height is approx. 4.3 m, with the bottom edge of the intermediate floor (upper level) at approx. 2 m – providing ample space for ergonomic work on the ground floor. Construction and Features Each section is approx. 2.12 m wide (beam width approx. 0.1 m) and contains 10 flow channels in total – 5 on the ground floor and 5 on the upper level. The shelf heights are adjustable via a perforation system in the beams, allowing flexible adaptation for different product sizes. The compartments are equipped with roller tracks which have a slight incline towards the picking side, enabling cartons and handling units to automatically roll forward for easy access. Access to the upper level is provided by an integrated staircase. A central aisle between the rack rows allows loading from the rear side and picking from the front side. Load capacities (with evenly distributed load) Shelf load: 100 kg Section load: 1,000 kg Intermediate floor: 250 kg/m² Summary of key data Lodpeyxqhvsfx Abxjac Total length: 37.03 m Overall width/depth: 4.59 m Beam height: 4.31 m Clear height (ground floor): approx. 1.98 m Section width: 2.12 m Compartments per section: 10 (5 ground floor / 5 upper level) Roller tracks: Yes, with incline (FIFO) Shelf load: 100 kg Section load: 1,000 kg Intermediate floor load: 250 kg/m² The system will be handed over dismantled at its current location. Viewing by appointment available. Self-collection required.

Stanje: dober (rabljeno), Okvir: 6500*1050*93 mm 10.200*1100*90/100 mm Prečke: 2800*110 CE mm 2400 kg/polica 2700*80/100/120 mm 1700 kg/polica 2700/2760*80 IPE mm 2400 kg/polica 2400*80 mm 2200 kg/polica Lasdpodlnk Tefx Abxsc Če potrebujete regale ali dodatke v drugih sestavah ali izvedbah, nas kontaktirajte. Dostava: Za stroške prevoza prosim navedite vašo poštno številko, kraj ter želeno količino artiklov.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost na odsek shranjevanja: 9.000 kg, skupna višina: 4.400 mm, skupna širina: 2.700 mm, nosilnost: 1.800 kg, višina okvirja: 4.400 mm, širina okvirja: 1.100 mm, Na prodajo kompleten komplet paletnih regalov MGL HX – robusten, preizkušen sistem za standardno skladiščenje palet. Idealna rešitev za operativna skladišča, e-trgovino in logistiko srednjih obremenitev. Blago na zalogi – hitra izvedba brez večtedenskega čakanja. Specifikacija: Sistem: MGL HX Tip: Paletni regali Okviri: Količina: 400 kos Višina: 4400 mm Globina: 1100 mm Prečke: Količina: 3000 kos Dolžina: 2700 mm Nosilnost: 1800 kg / nivo Prednosti: ✔ Univerzalna višina – primerna za večino skladišč ✔ Zelo dobro razmerje med ceno in kakovostjo Lsdpfx Asywrryebxjac ✔ Velika količina – možnost celovite opreme objekta ✔ Na zalogi – maksimalno skrajšate čas zagona skladišča Dodatno nudimo: Demontažo in montažo Prevoz po vsej Evropi Pomoč pri načrtovanju in optimizaciji postavitve skladišča Lokacija: Poljska Dobavljivost: takojšnja Kontakt: Pišite ali pokličite – pripravimo konfiguracijo popolnoma po vaši meri.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, skupna dolžina: 1.850 mm, skupna višina: 120 mm, nosilnost: 3.000 kg, Prodajam STOW prečke v idealnem stanju, na zalogi več kot 5000 kosov -1850 mm -120x50, 3000 kg Lodpfxjxprfzo Abxeac

Stanje: zelo dobro (rabljeno), Sestavljeno iz: 30 stojalnih okvirjev 10.200 x 1.100 mm 358 prečk 2.700 x CE100 mm 174 končnih omejevalnikov 2.700 x 80 mm Dovoljena obremenitev na pole je 2.400 kg (pri enakomerno porazdeljeni teži), to je 800 kg na paleto! Stojalni okvirji so popolnoma sestavljeni in pripravljeni za uporabo! Potrebujete regale ali dodatke v drugih kombinacijah ali izvedbah? Prosimo, kontaktirajte nas. Nudimo širok program novih in rabljenih regalov ter dodatkov in vam z veseljem pomagamo pri načrtovanju. Na voljo tudi dodatna oprema, na primer: Zaščite okvirjev, zaščita kotov, zaščita pred naletom, zaščite pred potiskanjem, iverne plošče, mrežaste rešetke, zadnje mreže, globinski nosilci. Dostava: Prosimo, povprašajte za stroške pošiljanja in navedite poštno številko, kraj in želeno količino artiklov. Dodatne storitve: Lajdsyink Eopfx Abxjc Načrtovanje, montaža/demontaža regalov, odkup/prodaja Vse tehnične podatke, informacije in cene si pridržujemo pravico do sprememb in napak ter vmesne prodaje!