Svedra in profilirni avtomati nakup rabljenega (503)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2010, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 120 mm, širina obdelovanca (maks.): 230 mm, model krmilnika: Siemens Simatic Panel Touch, dolžina obdelovanca (maks.): 8.483 mm, TECHNICAL DETAILS Kodpfoyqx T Asx Adkolp Min. processing height: 6 mm Max. processing height: 120 mm Min. processing length: 370 mm Max. processing length: 8,483 mm Min. processing width: 25 mm Max. processing width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip discharge power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7243

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20190824, hitrost pomika os X: 33 m/min, skupna masa: 2.800 kg, največja hitrost vrtenja: 6.800 obr/min, višina obdelovanca (maks.): 100 mm, širina obdelovanca (maks.): 180 mm, Four-side planer with only 100 operating hours! TECHNICAL DETAILS Material width: 20-180 mm Material thickness: 8-100 mm Infinitely variable feed speed: 8-33 m/min Spindle diameter: 40 mm Ax1 - bottom: Ø125 mm (Ø152 mm grooving cutter), 4 kW Ax2 - right: Ø115-170 mm, 4 kW Ax3 - left: Ø115-170 mm, 4 kW Ax4 - top: Ø105-150 mm, 5.5 kW Spindle speed: 6,800 rpm Feed roller dimensions: Ø140x35x50 mm Extraction connection diameter: 4x120 mm MACHINE DETAILS Feed motor power: 3 kW Electrical connection load: 21 kW Operating voltage: 400 V, 50 Hz, 3-phase Required air pressure: min. 6 bar Dimensions & Weight Dimensions (L x W x H): 3,040 x 1,600 x 1,680 mm Weight: 2,800 kg Feed table length: 2,000 mm Operating hours: 100 h EQUIPMENT Heavy-duty cast iron and welded steel frame Chrome-plated work table for secure material feed Side guide rollers with pneumatic drive Professional universal joint drive for the feed system Manual central lubrication unit Radial and axial adjustment of working spindles, with mechanical indicators for precise positioning Kjdeyu Ii Iepfx Adkolp Electric adjustment of working height Ergonomically positioned control panel to EU standards

Stanje: novo, Working width (finished size): 23–180 mm Working height (finished size): 6–105 mm Minimum workpiece length: 300 mm Feed speed: 6–12 m/min Motor power, horizontal spindles: 2 x 7.5 kW Motor power, vertical spindles: 1 x 7.5 kW Spindle speed: 6,000 rpm Spindle diameter: 35 mm Clamping length, vertical spindles: 120 mm Kodpeiiv Dcefx Adkolp Clamping length, horizontal spindles: 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle: 10 mm Loose roller integrated in outfeed table Extraction connection diameter: 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick adjustment - Front vertical pressure unit in front of the left vertical spindle - Infeed table length: 2,300 mm - Tool package consisting of 4 planer heads and one jointer rebate cutter

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Automatic moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles relative to right guide: 0 - 45 mm Min. and max. profile tool diameter: 100 - 220 mm Min. and max. cutterhead diameter: 120 - 140 mm Profiling capacity of 2nd lower horizontal spindle with 200 mm tool diameter: 15 mm Feed motor power: 5.5 kW Diameter of feed rollers: 140 mm Infeed table length: 2500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7500 m³/h Compressed air supply: 6 - 10 bar Weight: 6000 kg Dimensions (L x W x H): 6300 x 1620 x 1655 mm Spindle configuration: Lower horizontal spindle Motor power: 11.0 kW Spindle speed: 6000 rpm Klsdpfeg Umrmjx Adkep Right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 2nd lower horizontal spindle Motor power: 12.0 kW Spindle speed: 8300 rpm 2nd upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 3rd lower horizontal spindle Motor power: 7.5 kW Spindle speed: 8300 rpm SET - UP quick adjustment system Work tables with fine adjustment of all units via Control 100 PC system Axial adjustment range of vertical spindles: 80 mm large tool diameters Pneumatically operated full safety enclosure Feed system with full cardan drive Infinitely variable feed speed Electric height adjustment of the feed system and spindles with independent control Segmented pressure shoes after upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 feeder unit Note for used machines: • Specifications are subject to errors and prior sale. • Listed prices are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, H+K Four-Sided Planer and Thicknessing Machine Quadroplan 180 Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Motor upper spindle: 5.0 kW Motor lower spindle: 4.0 kW Motor left spindle: 4.0 kW, automatic floating head Kedpfeydmawox Adkolp Motor right spindle: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan feed Feed motor power: 0.75 kW Total connected load approx. 18.0 kW, 400 V, 50 Hz Extraction connections: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3370 x 1330 x 1500 mm Weight approx. 1,280 kg Electromotive adjustment of planing height with digital display Electromotive adjustment of planing width with digital display Pneumatic spindle locking Non-driven outfeed roller Automatic centralized lubrication Automatic star-delta starter INCLUDES 4 reversible-knife cutterheads INCLUDES operating manual & wiring diagram CE-certified All ball bearings NEW All V-belts NEW Note on used machines: • Technical data may be subject to errors and prior sale. • Prices quoted are ex works - free loading at location! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected without any guarantee or warranty claims. Potential buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will be answered only if you provide your address and phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, delovna širina: 180 mm, višina skobljanja: 120 mm, premer vretena: 40 mm, širina skobljanja: 180 mm, skupna masa: 1.550 kg, moč pogonskega motorja podajalnika: 4 W, hitrost vretena (min.): 6.000 obr/min, dolžina mize rezkalnega stroja: 2.000 mm, 4-side planer with 5 spindles - Weight approx. 1550 kg - Total power 16 kW - Planing width 180 mm - Planing height 120 mm - Number of heads: 4 (spiral) - Infeed table length 2000 mm - Spindle diameter 40 mm - Spindle speed 6000 rpm - Universal spindle V° 5.5 hp (4 kW) - Feed speed adjustable: 5–27 m/min Very good condition Kedpov Em S Sjfx Adkjlp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Number of spindles: 4 pcs Working width: 230 mm Planing height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min Control: Memory Plus Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of wood, including infeed mechanisation Weinig High Mech E 1 and outfeed mechanisation with Sicko paternoster stacker. The machine is equipped with a Memory Plus system with electronic (radial) positioning of spindles 3 & 4 and MarathonPowerCoating PLUS on the table plates. Last service by manufacturer: December 2025. The plant is still in operation and can be inspected at any time. Expected availability: from September 2026. Spindle 1: Bottom / 15 kW / 50 mm / 6,000 rpm Ksdpjyhfhnofx Adkelp Spindle 2: Right / 15 kW / 50 mm / 6,000 rpm Spindle 3: Left / 15 kW / 50 mm / 6,000 rpm Spindle 4: Top / 18.5 kW / 50 mm / 6,000 rpm

Stanje: dober (rabljeno), Koda: 0339 Blagovna znamka: WEINIG Klsdsyvut Depfx Adkjp Model: PROFIMAT 23/E - CE standard Avtomatski 5-vreteni skobeljni stroj za izdelavo okvirjev, pohištvenih delov, oken, vrat, letev, ročajev za metle, lesenih igrač in drugih lesenih izdelkov – CE standard. Značilnosti: - Masivno ogrodje iz litega železa za težke obremenitve - Kabelski prenos brez verige: natančno, robustno in vzdržljivo - Posebna zobovja na podajalnih valjih za manjši vstop v les - Kompaktni podajni sistem - Pnevmatski pritisk na podajalne valje - DIGISET WEINIG za levo in zgornje vreteno: nastavitev orodja neposredno z dvojnimi digitalnimi prikazovalniki Tehnični podatki: - Min./maks. delovna širina: 20/230 mm - Maks. delovna višina: 120 mm - Nastavljiva podajalna hitrost: 5–24 m/min - Premer vreten: 40 mm - Hitrost vreten: 6000 vrt/min - Premer podajalnih valjev: 140 mm - Dolžina predgladilne mize: 2000 mm - Zvočna izolacija in popolna varnostna zaščita - Motorizirano nastavljanje vertikalnega podajanja - Stranski pritisni valj nasproti prvemu desnemu vretenu - Motorizirano nastavljanje zgornjega vretena - Samodejno mazanje mize Sestava: 1° vreteno Spodnja glajalka – min./maks. premer 125–145 mm – motor 5,5 KM 2° vreteno Desno navpično profilno vreteno – min./maks. premer 100–200/180 mm – aksialna nastavitev 3° vreteno Levo navpično profilno vreteno – min./maks. premer 100–200/180 mm – aksialna nastavitev – moč motorja obeh vertikalnih vreten 7,5 KM 4° vreteno Zgornja glajalka – min./maks. premer 100/200 mm – motor 5,5 KM – aksialna nastavitev 5° vreteno Spodnja glajalka – min./maks. premer 100/200 mm – motor 5,5 KM – aksialna nastavitev - Število skobeljnih glav: 5 (vključeno) - Premer odsesovalnih priključkov (5x): 140 mm - Tlak komprimiranega zraka: 6–8 barov - Skupne mere (D x Š x V): 3400 x 1600 x 1600 mm - Teža: 3000 kg

Stanje: generalkompletno obnovljen (rabljeno), Štiri-stranski skobeljni stroj znamke Weinig model U22N, po obnovi. Miza 22 cm z rebrasto delovno površino. 8 vreten v sestavi: - spodnje: 4 kW - desno: 5,5 kW - levo: 5,5 kW - desno: 7,5 kW - zgornje: 7,5 kW - spodnje: 5,5 kW - zgornje: 7,5 kW Kedpfjx Syrksx Adkelp - univerzalno: 5,5 kW Pogonski motor: 4 kW Motor za dvig/spust: 0,85 kW Skupna moč: 53,35 kW Samodejno bočno podajanje. Zelo vsestranski stroj, primeren tako za dolge kose (s stranskim podajalnikom) kot za kratke kose (bližji pogon in rebrasta miza). Odlično ohranjen. Premer vreten: 400 mm

Stanje: rabljeno, Leto izdelave: 2001, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Klsdpfoyuzczex Adkep Length of jointer table: 2000 mm Feed speed: 5–24 m/min Four-side planer Weinig Profimat 26 S Summary: - 5 spindles (bottom, right, left, top, bottom) - Combined control of right spindle (axial), top spindle (axial), and glazing bead discharge - Working width (with tool cutting circle 125 mm): 20–230 mm - Working height (with tool cutting circle 125 mm): 8–120 mm Detailed description: 1ST SPINDLE - First lower horizontal spindle - Motor with brake, 5.5 kW - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle: 125–145 mm - Axial adjustment 5 mm - Rebating device - Hardened table insert in front of 1st lower spindle 2ND SPINDLE - First right vertical spindle - Motor with brake, 7.5 kW (shared with left vertical spindle) - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle, 15 mm below table level: 100–200 mm - Tool cutting circle, 40 mm below table level: 100–180 mm - Max. tool diameter behind fence: 180 mm - Max. profiling depth: 35 mm - Axial adjustment 40 mm - Right spindle, pneumatically controlled axially (40 mm) via selector switch, max. saw blade diameter 180 mm - Insertion segment: 125 mm 3RD SPINDLE - First left vertical spindle - Shared motor with 1st right vertical spindle - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle, 15 mm below table level: 100–200 mm - Tool cutting circle, 40 mm below table level: 100–180 mm - Max. tool diameter behind fence: 180 mm - Max. profiling depth: 35 mm - Axial adjustment 40 mm - Insertion segment: 125 mm 4TH SPINDLE - First upper horizontal spindle - Motor with brake, 7.5 kW - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle: 112–200 mm - Max. profiling depth: 35 mm - Axial adjustment 40 mm - Upper horizontal spindle, pneumatically controlled axially (40 mm) via selector switch, max. saw diameter 200 mm - Split pressure shoe in front of upper spindle, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded - Pneumatic glazing bead discharge after upper spindle, height-adjustable 5TH SPINDLE - Second lower horizontal spindle - Motor with brake, 4.0 kW - Diameter: 40 mm - Speed: 6,000 rpm - Tool cutting circle: 112–200 mm - Max. profiling depth: 15 mm All profiling spindles are dynamically balanced for high concentric running accuracy Combined control of right spindle (axial), top spindle (axial), and glazing bead discharge FEED SYSTEM - Mechanical feed, steplessly adjustable 5–24 m/min, with brake – 2.2 kW - Infeed roller before 1st lower tool pneumatically controlled "up/down" - Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning - Feed roller adjustment in relation to left spindle, axial 35 mm MACHINE ELECTRICS - Operating voltage: 400 Volt (range 380–420 Volt), 50 Hz - Electrical design according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1 Further information on request.

Stanje: zelo dobro (rabljeno), Štiristranski skobeljni stroj Weinig Profimat 26S Kedpoyvhkiefx Adkjlp Delovna širina 230 mm Delovna višina 130 mm Število vreten 6 Razporeditev vreten: Spodaj Levo Desno Desno Zgoraj Spodaj Hitrost pomika nastavljiva z variatorjem CE certifikat Tehnična dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 226-60368, skupna širina: 2.200 mm, skupna višina: 2.000 mm, skupna dolžina: 4.500 mm, skupna masa: 4.000 kg, WEINIG PROFIMAT 23 Four-Side Planer - Operating voltage: 380 V - Frequency: 50 Hz - Clamping length working spindle: 247 mm, jointing spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Tool length surfacing spindle: 240 mm, jointing spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Spindle diameter on surfacing, jointing, left, and top spindle: each 40 mm - Axial adjustment travel: 5 mm, radial: 15 mm, jointing spindle: 40 mm, radial: 50 mm, axial adjustment travel left spindle: 40 mm, radial: 200 mm, axial adjustment travel top spindle: 40 mm, radial: 120 mm - Max. cutting circle behind fence: 200 mm - Max. cutting circle working spindle: 145 mm, jointing spindle: 200 mm, left spindle: 200 mm - Below table (working spindle): 20 mm, below table (jointing spindle): 15 mm, left spindle: 15 mm - Min. cutting circle diameter working spindle: 125 mm, jointing spindle: 100 mm, left and top spindle: 100 mm - Max. cutting circle diameter working spindle: 145 mm, jointing spindle: 200 mm, left spindle: 200 mm, top spindle: 200 mm - Spindle speed on all spindles: 6,000 rpm - Extraction connection on all spindles: 140 mm - Max. chip removal on all spindles: 10 mm Ksdpfx Adjyu Iwljkjlp - 2nd bottom spindle – clamping length: 240 mm, tool length: 240 mm, spindle diameter: 40 mm - Axial adjustment travel: 35 mm, radial: 68 mm - Max. cutting circle below table: 200 mm, min. 18 mm - Cutting circle diameter: min. 100 mm, max. 200 mm - Speed: 6,000 rpm - Motor power: 4 – 11 kW - Extraction diameter: 140 mm - Chip removal: from 0 to 0.5 mm - Surfacing table length: 2000/2500 mm - Surfacing table adjustment range high/low: 10 mm - Jointing fence adjustment range: 10 mm Note: The item must be picked up definitively between 01 and 10.06.2016 on a date to be arranged. FCA D-75433 Maulbronn – loaded onto truck

Stanje: rabljeno, Leto izdelave: 2005, Delovna širina: 180 mm Delovna višina: 110 mm Število delovnih vreten: 4 Razporeditev vreten: spodaj, desno, levo, zgoraj Moč motorja spodnjega in zgornjega vretena: 7,5 kW Moč motorja desnega in levega vretena: 7,5 kW Nastavitev spodnjega vretena: - Nastavitev desnega vretena: - Nastavitev levega vretena: ročni volan Nastavitev zgornjega vretena: ročni volan Skobelni glavi spodaj in zgoraj: Centrolock Kodpfxjyq R Aio Adkslp Skobelni glavi levo in desno: Centrolock v kombinaciji s profilirno možnostjo Hitrost podajanja: 2 Pritisk podajalnih valjev: vzmet Poraba toka: 32,8 A Priključek za odsesavanje: Dolžina stroja: Širina stroja: Teža:

Stanje: zelo dobro (rabljeno), HM window machine: trimming (planing) 3 x right, 4 x left, top sanding, bottom sanding Klsdpfxjt Hk Ats Adkjp

Stanje: dober (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, delovna širina: 230 mm, višina skobljanja: 170 mm, premer vretena: 50 mm, širina skobljanja: 230 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 7.500 W, vrsta nastavitve višine: električni, premer gredi skobeljnika: 50 mm, število vreten: 8, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, 8 spindles, Working width: 230 mm, Working height: 180 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6 – 36 m/min, Spindle configuration: 1-Bottom (7.5 kW) – Grooving spindle 2-Bottom (7.5 kW) 3-Right (11 kW) 4-Left (11 kW) 5-Top (11.0 kW) 6-Bottom (22.0 kW) 7-Bottom (7.5 kW) 8-Top (7.5 kW) 8 driven rollers in the table Ksdpfx Aor Axwnedkelp

Stanje: rabljeno, Leto izdelave: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on the upper spindle, air cushion table with two-axis control for the left and upper spindle, brand new control system (latest Weinig version). Maximum working width: 260 mm Maximum working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW, shared motor with left spindle Kodpfx Adswwwkhjkolp 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optional with/without feed Feed brake system: Yes Feed speed steplessly adjustable: 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubrication pump: manual Max. cutting depth jointing: 10 mm Jointing rebate cutter on jointer: Yes Driven rollers in table: 1 unit Control type: PLC control Spindle position indicator: mechanical numeric display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim

Stanje: rabljeno, Štiristranski skobeljni avtomat SCM Sintex NTE Elektronski štiristranski skobeljni in profilni rezkalni avtomat Širina skobljanja: 180 mm Višina skobljanja: 105 mm 4 vretena Motor vretena 1 + 4: 7,5 kW Motor vretena 2 + 3: 7,5 kW Premer vretena: 35 mm Dolg podajalni pult pribl. 2300 mm Hitrost vretena: 6000 obr/min Hitrost podajanja: 6/12 m/min Električno nastavljanje višine in širine Črpalka za mazivo Vključno s strojnim orodjem Klodpfjyi Eaaox Adkop Stroj JE SERVISNO PREVERJEN – V ZELO DOBREM STANJU Iz zaloge Lieboch / MOŽNOST LEASINGA

Stanje: rabljeno, WEINIG Profimat 26 Super Planer and Profiling Moulder Working width: 20 - 230 mm (up to 260 mm) Working height: 8 - 120 mm (up to 140 mm) 5 working spindles, 40 mm spindle diameter Long infeed table (approx. 2000 mm) Main bottom spindle: 4 kW / Left & Right spindles: 7.5 kW each / Top spindle: 5.5 kW / Finishing bottom spindle: 5.5 kW Ksdpsyi Dw Djfx Adkelp Pneumatic pressure feed rollers Continuous cardan feed: 5 - 24 m/min, stepless adjustment Feed roller before jointer Push-button control panel Automatic lubricant pump Mechanical digital readouts CE-certified machine Year of manufacture: 2001 Supplied without tooling Machine is WORKSHOP-OVERHAULED and in GOOD CONDITION Machine is connected and ready for demonstration at the exhibition center Available from stock in Lieboch

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 400 mm, višina skobljanja: 100 mm, širina skobljanja: 350 mm, Velikost štiristranske obdelave: 350 mm x 100 mm. Ima peto horizontalno os dolžine 400 mm, ki se lahko uporablja za serijsko rezanje. Skupna moč: 24 kW. Možnost preizkusa, stroj je v odličnem tehničnem stanju. Kljdpfx Adeyt Hbyokep

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Refurbished four-sided planer moulder by SCM GROUP. This four-spindle machine enables high-quality, precise planing and is equipped with a noise-reducing safety enclosure. Its simple, proven design ensures long-term durability and machine performance. Designed for small workshops producing simple battens, edge-glued panel blanks, processing window scantlings, and similar applications. With its capacity, this four-sider is also suitable as a pre-processing unit for a window manufacturing machining centre. Maximum workpiece size: 180 x 105 mm Aluminium planer heads included in the machine price Possibility to fit profile tools up to 10 mm Including surcharge option: pressure wheel in front of the tool Technical Specifications: Minimum/maximum working width up to 23 / 180 mm Minimum/maximum working height up to 6 / 105 mm Usable spindle length vertical/horizontal: 120 / 190 mm Spindle axial adjustment: 15 mm Horizontal spindle motor power: 7.5 kW Vertical spindle motor power: 5.5 kW Feed motor power: 1 kW Kljdpfx Adjwbgtgskop Infeed table length: 1700 mm Feed speed: 6/12 m/min Working motor speed: 6000 rpm Tool diameter: 100 mm Spindle diameter for tool mounting: 35 mm Feed roller diameter: 120 mm Extraction connection: 160 mm Weight: 1200 kg Equipment refurbishment status and machine readiness for collection must be verified in advance! In stock at Telnice u Brna Testing, machine demonstration and operator training naturally provided

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Štiristranski skobeljni stroj Gabbiani GS120 s podajalnikom materiala Delovna širina: 120 mm Ksdsyr Nu Hjpfx Adkolp Delovna višina: 80 mm Število vreten: 7 Razporeditev vreten: Spodaj Levo Desno Zgoraj Spodaj Zgoraj Brusilna enota Gosenicni pomik Podajalnik materiala Sacot Stroj je primeren za suhi, mokri les ter za kratke elemente.

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Štiri-stranska skobeljna Weinig Hydromat 23, lamelirni stroj 8 vreten, Delovna širina: 230 mm, Delovna višina: 160 mm, Premer vretena: 50 mm, Podajanje: 7,5 kW / 6 – 36 m/min, Razporeditev vreten: 1–spodaj (7,5 kW) 2–desno (7,5 kW) Klsdpfx Asxqh E Hsdkep 3–levo (7,5 kW) s profilnim jointerjem 4–desno (7,5 kW) s profilnim jointerjem 5–zgoraj (7,5 kW) s hidravličnim vpenjanjem 6–spodaj (30 kW) s hidravličnim vpenjanjem 7–zgoraj (7,5 kW) s hidravličnim vpenjanjem in ravnalnim jointerjem 8–spodaj (7,5 kW) s hidravličnim vpenjanjem in ravnalnim jointerjem. Trda prevleka. Dva gnana valja v mizi.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prenovljeni štiristranski skobeljni stroj znamke SCM GROUP. Enostavna in robustna konstrukcija zagotavlja dolgo življenjsko dobo in zmogljivost stroja. Tog jeklen podstavek stroja zagotavlja natančnost in kakovost obdelave. Stroj je namenjen večjim obratom za izdelavo profiliranih in ravnih profilov. 5 delovnih vreten: spodnje, desno, levo, zgornje, spodnje Avtomatsko centralno mazanje delovne mize Variator hitrosti pomika materiala Preverjen stroj s polletno garancijo Odlično tehnično stanje Opremljen z orodjem Tehnični podatki Delovna širina (debelina dokončanega profila) min/max 25 / 230 mm Delovna višina (debelina dokončanega profila) min/max 6 / 120 mm Dolžina mize 2000 mm 1. vreteno spodaj cca 5 kW Desno in levo vreteno cca 7 kW Kledpovxtzaefx Adkop 4. vreteno zgoraj cca 7 kW 5. vreteno spodaj cca 5 kW Število obratov orodij 6000 obr/min Nastavljiva hitrost podajanja 4 – 24 m/min Motor za podajanje materiala 4 kW Teža cca 3000 kg

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Kljdpfeu Agh Sox Adkep Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site

Stanje: zelo dobro (rabljeno), delovna širina: 250 mm, višina skobljanja: 140 mm, premer vretena: 50 mm, širina skobljanja: 250 mm, delovna višina: 140 mm, moč pogonskega motorja podajalnika: 30.000 W, največja hitrost vretena: 6.000 obr/min, vrsta nastavitve višine: hidravlični, vrsta vhodnega toka: trifazni, število vreten: 9, vhodna frekvenca: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, Working height: 140 mm, Spindle diameter: 50 mm, Feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-Bottom (11 kW) – with hydraulic clamping 2-Right (9 kW) 3-Left (11 kW) 4-Right (9 kW) 5-Top (15 kW) – with hydraulic clamping 6-Bottom (7.5 kW) – with hydraulic clamping 7-Top (7.5 kW) – with hydraulic clamping and straight jointer 8-Top (11 kW) – with hydraulic clamping and straight jointer Kodeq Au Tljpfx Adkolp 9-Bottom (11 kW) – with hydraulic clamping and straight jointer 11 powered rollers in the table