Izravnalne in upogibne stiskalnice nakup rabljenega (76)

Stanje: rabljeno, Technical details: Pressure: 200 t Stroke: approx. 200 mm Table size: L:1200 x W:450 mm Jaw width: 1000 x 200 mm Total power requirement: 18 kW Machine weight approx.: 15 t Machine dimensions (LxWxH): 4.5 x 1.5 x 2.2 m Carrier Straightening Press Eccentric Bending Machine - Jaw holder: LxW 1200 x 220 mm Ihjdpou Nfrpjfx Adksw - Jaw adjustment: 200 mm, traversable - Jaw opening width: 300 mm - Manual operation - Electrical cabinet (LxWxH: 0.85 x 0.8 x 2.7 m) Accessories: - Various stops, shims, angle stops, and marking gauges Included as per list (i.D.).

Stanje: rabljeno, Leto izdelave: 2008, Tehnične podrobnosti: Tlak: 6 t Hod: 1020 mm Isdsw Ng D Tepfx Adkjhw Skupna potrebna moč: 3,5 kW Možno je ravnanje samo med vrhovi

Stanje: novo, Biegeradius min. 190 mm Vierkantstahl 20 x 20 mm Flachstahl 100 x 7 mm Rundstahl 22,0 mm Winkelstahl 100 x 10 mm Abmessung L-B-H 900 x 430 x 310 mm Iedexcuyhepfx Adkohw Maschinengewicht ca. 33.0 kg. Eigenschaften - Zum exakten Kalt- und Warmbiegen von Flach-, Rund- und Vierkantstählen - Stabile Bauart zum Festschrauben auf der Werkbank - Stufenlos einstellbarer Biegeanschlag - Mit Exzenter-Schnellspannung zum rationellen Arbeiten - Ablesbarer Biegewinkel bis 120° - Hohe Wiederholgenauigkeit durch Biegewinkelanschlag - Ideal für Reparaturwerkstätten und Schlossereien Biegeleistung kalt warm Flachstahl 100 x 7 mm 100 x 15 mm 65 x 12 mm 75 x 20 mm Rundstahl 22 mm 27 mm Vierkantstahl 20 x 20 mm 25 x 25 mm Winkelstahl 100 x 10 mm 100 x 15 mm Lieferumfang - Biegeplatte - Winkelanschlag stufenlos - Klemmblock mit Exzenterspanner - Materialanschlag

Stanje: novo, Square steel 16 x 16 mm Flat steel 100 x 5 mm Angle steel 60 x 8 mm Minimum bending radius 190 mm Round steel 18.0 mm Machine weight approx. 33.0 kg. Features: - For precise cold and hot bending of flat, round, and square steels - Robust design for bolting to the workbench - Continuously adjustable bending stop with locking pin - With eccentric quick-clamping for efficient operation - Readable bending angle up to 120° - High repeat accuracy thanks to bending angle stop - Ideal for repair shops and metalworking shops Bending capacity cold hot Flat steel 100 x 5 mm 100 x 15 mm Iedpfxexcux Ro Adkshw 65 x 10 mm 75 x 20 mm Round steel 18 mm 27 mm Square steel 16 x 16 mm 25 x 25 mm Angle steel 60 x 8 mm 100 x 12 mm Scope of delivery: - Sharp / round bending plate - Radius bending plate R 20 / R 25 - Set-off block - Bending plate for round bar - Set-off plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Stanje: dober (rabljeno), Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press - Flat bar bender: hydraulic profile bending machine - Base frame: on castors, table foldable on both sides - Mode of operation: manual and automatic modes - Accessories: see photos - Overall dimensions: 2155/1320/H1070 mm - Transport dimensions: 1320/840/H1245 mm Ihodpfjh Tk Dasx Adkew - Weight: 404 kg

Leto izdelave: 1984, stanje: rabljeno, Printing machine, embossing machine, stamping machine - Non-functional, control unit: defective - Pneumatic-hydraulic press - Stroke: 50 mm - Clear distance between columns: 850 mm Ihedpfed Hp Tzjx Adkow - Table size: 400 x 370 mm - Dimensions: 1285/590/H1820 mm - Weight: 416 kg

Stanje: dober (rabljeno), Hydraulic press, bending machine, straightening machine, section straightening system, coil straightening machine, coil straightener, shaft straightening system, combined bending-straightening press, section bending machine, flat bar bender, horizontal bending/straightening press, horizontal bending machine - Hydraulic press: straightening system, straightening machine, section straightening system with roller conveyor - Pressing force: 10 tons - Pressure: max. 100 bar - Roller conveyors: 2x 1000/170/H1110 mm / Rollers Ø 56 x 140 mm - Transport dimensions: 1335/1220/H1470 mm - Weight: 807 kg Ihedpfx Ajvgu Hajdkow

Leto izdelave: 2006, stanje: rabljeno, Printing machine, embossing machine, stamping machine, rail stamping machine, embossing press, die cutter, pneumatic die cutter - Manufacturer: Stommel & Voos, embossing press / rail stamping machine on solid base frame - Model: SV700/6/PE/EF - Strip width: 13 mm, convertible - Individual components: see photos - Accessories: no additional accessories - Dimensions: 820/520/H1680 mm Ijdpfx Adskyy Ufekjhw - Weight: approx. 154 kg

Stanje: rabljeno, Leto izdelave: 1991, Teža stroja cca 1,5 t Ihjdpfxox Ni E Is Adkew Dodatna oprema: da

Stanje: dober (rabljeno), Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press - Bending/straightening press: hydraulic profile bending machine - Base frame: heavy-duty design, mobile - Hydraulic unit: unfortunately no type designation - Piston rod: Ø 55 mm / stroke: 200 mm - Individual components: see photos Ijdpot Hmhlefx Adkohw - Overall dimensions: 1180/1060/H1000 mm - Weight: 445 kg

Stanje: novo, Leto izdelave: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T 800 - Press force: 80 tons - With semi-automatic control Control unit (99 programs with up to 16 steps each) Including bending pin (without punch) Including tool holder for dies and foot pedal Ieded A Nc Dopfx Adkehw - Stroke adjustment infinitely variable from 0-300 mm - Working speed adjustable Maximum working stroke: 10 mm/sec Return stroke: 20 mm/sec - Hydraulic pressure adjustable - Maximum tool height: 300 mm - Motor power: 7.5 kW - 400 Volt, 50 Hz, 3 phase - Working height: 940 mm - Enclosed table - Replaceable wear plate - Weight: 2100 kg - Bending capacities: Flat material up to 300x32 mm with Vmax Round tube: 3/8" – 3"

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 201805015, delovna dolžina: 4.100 mm, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 300 mm, skupna širina: 1.550 mm, skupna dolžina: 3.560 mm, skupna višina: 2.850 mm, stiskalna sila: 185 t, skupna masa: 18.000 kg, potrebna višina: 3.440 mm, dolžina mize: 4.100 mm, vgradna višina: 500 mm, Little-used press brake in excellent condition. 185 tons, 4 meters, 6 axes No. 4 rear backgauges, No. 2 retractable pneumatic front supports ESA 660W CNC control LAG press brakes embody the synthesis of Italian technological innovation, attention to detail and design, and extensive Chinese manufacturing capabilities. These values, combined with top-quality European components, allow LAG to offer its customers press brakes, shears, and insertion machines with the best price-performance ratio on the market. This is the top-of-the-range press brake, equipped with accessories and automation for high-profitability performance. Main standard configuration of the G-TOP press brake: Iedpjwync Hefx Adkjhw - G-FLEX crowning compensation system - G-CS active crowning system - 6 axes (Y1-Y2-X-R-Z1-Z2) - Double pump: one main power pump for the machine operation, one for crowning management - DSP AP safety system - Touch-screen control panel housed in electric cabinet - Sliding front support arms - Touch-screen numerical control - 4-axis (X-R-Z1-Z2) reference rear backgauge model GRP-4

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T500 with 1500 mm long straightening beam - Press force: 50 tons - Semi-automatic control system (99 programs, each with up to 16 steps) - Includes bending pins (without punch) - Includes tool holder for dies and foot pedal Ihsdpedk H A Ijfx Adkew - Infinitely variable stroke adjustment: 0–300 mm - Adjustable working speed Working stroke max. 10 mm/sec. Return stroke: 20 mm/sec. - Adjustable hydraulic pressure - Maximum tool height: 300 mm - Motor power: 5.5 kW - 400 Volt, 50 Hz, 3 phase - Working height: 900 mm - Enclosed table - Interchangeable wear plate - Weight: 1300 kg - Bending capacities: Flat material: 300 x 15 mm Flat on edge: 60 x 15 mm Round tube: 3/8"–2 1/2"

Stanje: rabljeno, Leto izdelave: 1990, Press force 3 t Outreach 0 mm Stroke 200 mm Total power requirement 15 kW Machine weight approx. 4 t Space requirement approx. m JENNY - Switzerland, Automatic Double-Column Straightening Press Type RZ - 205 / 3 - 600, Year of manufacture 1990, Serial No. 86 596 _____ Press force of upper ram 3 t Ram stroke approx. 200 mm Max. installation height 500 mm Max. clamping length of workpiece 600 mm Height of center above table approx. 210 mm Ram feed rate down 0.17 mm/sec Ram feed rate up 0.02 - 0.17 mm/sec Pump drive 15 kW Isdot Hw Amepfx Adkshw Total drive power approx. 20 kW - 380 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: Machine without automatic workpiece feed, the parts (wave-shaped) are manually loaded; a Plexiglas sliding hood is located in front of the work area, manually operated. Currently equipped with 1 straightening punch and 4 pneumatic measuring stations; however, connection options are available for up to 7 measuring stations. These are longitudinally adjustable along the lower press table over a range of approx. 500 mm; the straightening punch is adjustable on the upper ram in a prism guide. 2 tailstocks on the press table, adjustable for a max. clamping length of 600 mm; the left side is motor-driven and equipped with a clamping quill, the right side with a dividing disc. Workpiece rotation via stepper motor from 10 to 100 rpm. 2 workpiece supports (prisms) on left and right for placing the workpiece. The workpiece is measured at pre-determined positions and straightened accordingly; the straightening process is monitored and controlled with the measurement device. Stroke control for pre-set ram stroke. Left tailstock powered. Original JENNY sequence controller (FMS) in a separate switch cabinet with monitor and keyboard for parameter input.

Stanje: rabljeno, Leto izdelave: 1984, Pressure 10 t Distance between uprights 500 mm Stroke 200 mm Total power requirement 10 kW Machine weight approx. 4,500 kg Space requirement approx. ... m M A E Automatic Double-Column Straightening Press with Microprocessor Control Model ADS F 10 RH Year of manufacture 1984 Serial No. 5 002 84 00 Straightening force - Upper ram pressing force 10 t Return force 7.5 t Ram stroke 200 mm Stroke speed 100 mm/s Iodpfx Aet Hwwdodkehw Maximum height above table 160 mm Clamping length of workpiece, approx. 600 mm Maximum installation height 600 mm Pump drive 5.5 kW Total drive power approx. 10 kW - 380 V - 50 Hz Weight approx. 4,500 kg Machine height approx. 3,300 mm Accessories / Special Equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control system with display for fully automatic straightening operation: load workpiece, measure 'bend', position workpiece at 'maximum bend at top', straightening process, control measurement (and if necessary re-straighten), eject workpiece. • Machine equipped with a short workpiece feed via lifting beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points per workpiece; 2 workpiece supports left and right, plus 1 pneumatically adjustable straightening anvil. • The straightening punches are individually actuated pneumatically • Gripper for rejected parts that can no longer be straightened, mounted at the rear Condition: good to very good – demonstration ready shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further straightening presses in stock – please enquire.

Stanje: zelo dobro (rabljeno), Tehnični podatki: Pritisna sila: 500 ton Razdalja med stebri: 4300 mm Dimenzije (dolžina x širina x višina): pribl. 5100 x 900 x 4300 / 5600 mm Za prevoz (dvodeljno): Dimenzije: 2 x 5100 x 900 x 3050 mm Teža: 1x 15.700 kg – 1x 13.200 kg (skupaj 28.900 kg) Iodpfjxgbllex Adkehw Prodajalec ne prevzema odgovornosti za tiskarske ali prenosne napake. Stroj je po videzu, tehniki in obrabi primeren starosti; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna širina: 700 mm, stiskalna sila: 16 t, delovna višina: 1.050 mm, višina središča: 1.050 mm, Avtomatska ravnalna naprava, mehansko generalno obnovljena, dobi novo krmiljenje SIMATIC S7-1500, Drive Controller CPU 1504D TF. Maksimalna razdalja med konicama 500 mm, ravnalna sila 16 t, hod ravnanja 20 mm, prazni hod 95 mm, delovna višina 1050 mm, priključna moč 10 kVA, povprečna poraba 1,3 kW. Možnost: Stroj je lahko opremljen z dvižnim transporterjem (skozi stroj), po želji kupca tudi z dovodnimi/odvodnimi trakovi ter z varnostno ograjo. Trenutno je stroj opremljen z eno ravnalno postajo, možna je razširitev. Ijdpfexldiqsx Adkshw

Stanje: rabljeno, Leto izdelave: 1989, Sheet width: 150 mm Ihodpfjcxxvmsx Adkew Number of straightening rollers: 4 Number of feed rollers: 2 front + 2 rear Roller diameter: 60 mm Space requirement approx.: 1.8 x 0.7 x 1.4 m

Stanje: zelo dobro (rabljeno), Pressure 6.3 t Reach 200 mm Stroke 200 mm Maximum installation height 500 mm Table clamping surface 450 x 420 mm Machine weight approx. 1.5 t Space requirement approx. 1.2 x 0.6 x 2.0 m Two-hand operation, various attachments Iedpfx Adswuu A Aokshw

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.900 mm, dolžina mize: 10.000 mm, skupna širina: 3.660 mm, skupna dolžina: 10.200 mm, višina mize: 900 mm, širina mize: 2.545 mm, stiskalna sila: 100 t, skupna masa: 26.000 kg, obratovalna hitrost: 9 mm/s, hitrost vzvratne vožnje: 14 mm/s, pritisk: 320 letvica, moč: 4 kW (5,44 KM), MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10-METER-LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT PLATES TECHNICAL DATA Force T 100 Motor Power kW 4 Motor Ventilation Switch Power kW 0.37 Bridge Travel Motor Power kW 0.75 Working Speed mm/s 3 Approach Speed mm/s 9.2 Return Speed mm/s 14.4 Max. Pressure Bar 320 Usable Area mm 10,000 x 2,545 Ram Stroke max. mm 450 Max. Open Height mm 600 Lateral Travel mm 2,120 Portal Travel mm 9,140 Working Height mm 900 Total Length mm 10,200 Total Width mm 3,660 Height mm 2,900 Weight kg 26,000 The TL-100/10000E hydraulic press belongs to the T/NC series and is specifically designed for straightening welded structures and cut plates. As with all our hydraulic presses from this series, its design facilitates the loading and unloading of large parts. Thanks to the lateral movement of the cylinder and longitudinal movement of the bridge, different pressing points can be accessed without having to reposition the workpiece. The machine meets all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLE Iedpfx Adowkvmnekshw • Electro-welded frame made exclusively of S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and accuracy. • Constructed and designed with finite element software. • The longitudinal movement of the bridge is achieved by a frequency inverter and toothed belt. • The lateral movement of the head is motorized. CYLINDER AND HYDRAULIC UNIT • Double-acting cylinder with honed sleeve, chrome plated piston, and maintenance-free wear guides. • Equipped with a removable and replaceable cushion to prevent piston wear and machined on the end to accommodate the tool. • Features a standard anti-rotation device for the cylinder and a calibrated front with limit switches for cylinder stroke adjustment. • Motorized hydraulic unit with two speeds and automatic shut-off of fast speed. • Cylinder decompression valve. • Pressure regulator. • Glycerine pressure gauge with tonnage display. ELECTRICAL SYSTEM AND SAFETY • The control panel features a selector switch for manual or semi-automatic operation. • There is also a selector switch for choosing between rapid approach and slow working speed. • Operation via a pendant control with emergency stop and low-voltage control. • Includes a button to confirm the operating cycle.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SH-250, skupna višina: 1.700 mm, skupna širina: 2.000 mm, skupna dolžina: 3.000 mm, stiskalna sila: 250 t, obratovalna hitrost: 4 mm/s, hitrost vzvratne vožnje: 8 mm/s, hod: 450 mm, Oprema: dokumentacija / priročnik, MODEL: SH-250 STANDARD DESCRIPTION: Our SH series horizontal ram hydraulic press is designed with a range of three different force capacities from 100 to 250 tons. Horizontal hydraulic presses are specifically engineered for straightening and bending profiles, bars, and beams. The machine’s horizontal design allows for easy handling of large-size beams and profiles. The next-generation HS series horizontal hydraulic press has evolved into a versatile system, offering the option to fit a wide variety of tooling. These units operate at a maximum hydraulic pressure of less than 350 BAR, ensuring maximum durability for the entire hydraulic system. STRUCTURE AND TABLES The SH series horizontal straightening hydraulic presses feature a C-frame, fully welded from S355JR steel, stabilized and machined after welding to ensure perfect parallelism and precision. The structure is calculated and designed with finite element analysis software, guaranteeing consistent high standards of strength, precision, and quality. Equipped with an anti-rotation main pressing cylinder and a rear support table made from high-strength steel, machined with DIN 650 T-slots. Standard equipment includes support blocks made of C45E steel. Each model is fitted as standard with a pair of height-adjustable support rollers, one located on each side. Page 2/4 CYLINDER AND HYDRAULIC UNIT Double-acting cylinder with honed tube, chrome-plated piston rod, and maintenance-free wear guides. Cylinder is operated via a lever-actuated hydraulic distributor. It is fitted with a removable block to prevent damage to the piston rod. Single-speed powered hydraulic unit. ELECTRICAL SYSTEM AND SAFETY The electrical system comes equipped with a motor protector and emergency stop. Supplied with a glycerin-filled tonnage manometer and hydraulic oil. Complies in full with all essential safety and health requirements in accordance with CE regulations. Provided with an instruction manual. OPTIONAL ACCESSORIES • Standard infeed rails 3,000 mm to 12,000 mm, height adjustable. • Motorized infeed rails from 3,000 mm to 12,000 mm. • Hydraulic lifting and tilting of feed rails. • 415 mm folding kit. PROMECAM clamp. • Additional single-speed manual pump, allowing for both manual and powered operation modes. • Low-voltage electric foot pedal operation. Ihodpfx Adowk Hkqskew • Precision cylinder stroke limit switches with anti-rotation system and low-voltage electric foot pedal control. • Two-speed hydraulic power unit. • Custom geometry to suit your requirements.

Stanje: dober (rabljeno), Leto izdelave: 2007, Znamka: SCHIAVI Model: HFBs 100/3 Nazivna sila: 100 ton Dolžina miz: 3110 mm Širina delovne mize: 90 mm Delovna višina brez dviga: 910 mm Največja razdalja med mizami: 450 mm Nazivni maksimalni hod: 250 mm Globina labodjega vratu: 405 mm Razdalja med stebri: 2700 mm Maksimalni tlak: 303 MPa Količina olja: 126 dm³ Iodjxaz Igspfx Adkshw Največja dolžina (zasedeni prostor): 4000 mm Moč motorja: 7,5 kW

Stanje: dober (rabljeno), table press with hydraulic unit Ihjdpfsk Adfnsx Adkew

Stanje: novo, Pressure 500 t Column clearance 600 mm Stroke 600 mm Table surface 3500 x 1500 mm Distance cylinder to table 600 mm Downward speed from 8 mm/sec Upward speed 16 mm/sec Travel on the bed 2200 x 900 mm Total power requirement 30 kW Machine weight approx. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates precisely machined with a CNC milling machine - Chrome-plated cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump by Bosch Rexroth - Hydraulic directional valve by Hydrapack or Badestons - Hydraulic manifold according to EN standards - Hydraulic oil tank 1000 liters - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet per EN standards - All cables are labeled and neatly arranged Iodpfx Ajfv Awhjdkehw - All electrical components by Siemens CONTROL PANEL - Stroke control at any position - X, Y, and Z axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with EU safety standards 2006/42/EC Machinery Directive, EN ISO 16092-1 and 16092-3 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION - Price includes transport costs, installation, and training at the customer's facility. - Hydraulic oil is not included in the price. - All handling costs (e.g. crane, forklift, etc.) are to be borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer's warranty. - This warranty includes delivery of all spare parts required for repair and a service visit for the machine. Damaged parts will be returned to the manufacturer after being replaced with a new part. - This warranty does not cover parts damaged due to improper use.

Stanje: novo, Press force 300 t Working speed 3-8 mm/sec Stroke 500 mm Return speed 15 mm/sec Table size 3000 x 1500 mm Tank capacity 45 l Travel path x / y 2600 x 1000 mm Clearance 500 mm Total power requirement 18.5 kW Machine weight approx. 18 t Ihodsvxw Hmepfx Adksw 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates precisely milled with CNC milling machine - Chrome-plated cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump from Bosch Rexroth - Hydrapack or Badeston hydraulic valve - Hydraulic block according to EN standards - Hydraulic oil tank (xxx liters) - Pressure adjustment via pressure transmitter/controller ELECTRICS - Control cabinet according to EN standards - All cables are labeled and clearly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with EC safety standards 2006/42/EC Machinery Directive and EN ISO 16092-01 ,16092-03 - Two-hand control operation - Reset and emergency stop button - Safety cable with switch around the press 4. TRANSPORT AND INSTALLATION - The price includes transport costs, installation, and training at the customer’s plant. - Hydraulic oil is not included in the price. - All handling costs (such as crane, forklift, etc.) are borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer’s warranty. - This warranty includes the delivery of all spare parts required for repairs and service calls to the machine. Damaged parts must be returned to the manufacturer after replacement. - This warranty does not cover parts damaged by improper use.