Izravnalne in upogibne stiskalnice nakup rabljenega (89)

Stanje: novo, Tlak 100 kN Hod 0-200 mm Velikost mize 450 x 1000 mm Delovna hitrost: 6-10 mm/s Povratna hitrost 20 mm/s Delovna višina 900 mm Codpfjzh N Ukjx Afdsrd Maks. višina orodja 200 mm Skupna potrebna moč 1,5 kW Maks. zmogljivost upogibanja - okroglo 42x3,2 mm Zmogljivost upogibanja 150x10 mm Teža 320 kg Dimenzije 1010x480x1120 mm Dodatki: - Nožni pedal - Digitalni prikazovalnik - Vodilni zatiči brez štance - Nosilec za orodje za matrice - Vključno z V-matrico V 63 - Štanca R 5

Stanje: novo, Tlak stiskanja 300 kN Maks. hod 235 mm Zmogljivost upogibanja 200x24 mm Maks. zmogljivost upogibanja – okroglo 60x4,0 mm Maks. višina orodja 250 mm Dimenzije mize 660x1250 mm Delovna višina 900 mm Povratna hitrost 20 mm/s Delovna hitrost 10 mm/s Skupna potrebna moč 3 kW Teža 950 kg Oprema: Crodpfx Ajyv I Tdefdod - avtomatski NC krmilnik (99 programov po 16 korakov) - vijačeno (brez udarnega orodja) - nosilec za matrice - vključen nožni pedal - matrica V 63 - udarno orodje R 5

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, TORSIJSKA PREVODNA STISKALNICA, 3000x80T ROMEA, rabljena, obnovljena, skladno s predpisi, NI "CE". DELOVANJE SAMO PRI POČASNI HITROSTI, ZA UPORABO V SKLADU S PREDPISI BREZ FOTOCELIC, Z ZGORNJIM NOŽEM IN SPODNJIM PRIZMOM S 5 UTORI, BRUŠENE, Z ROČNO NASTAVLJIVIMI ZADNJIMI PRIMIKI IN TEHNIČNIM POROČILOM O SKLADNOSTI. Crodpjzhkqmefx Afdjd

Stanje: novo, MOTORIZED DOUBLE-SPEED AUTOMATIC HYDRAULIC PRESS WITH FAST APPROACH, 20 TON CAPACITY Max Capacity: 20 tons Rapid Approach Speed: 1,700 mm/min Working Speed (slow): 440 mm/min Cylinder Stroke: 300 mm Cylinder Rod Diameter: 45 mm Rod End Thread: M14 Tank Capacity: 30 liters Maximum Pressure: 350 bar Voltage: 400 V Frequency: 50–60 Hz Crjdervz A Sopfx Afdsd Motor Power: 1.5 kW Maximum Absorbed Current: 3.8 A Weight: 200 kg

Stanje: novo, Leto izdelave: 2025, OMCN 100 Ton Electro-Hydraulic Press Mod. 164/R Made in Italy ELECTRO-HYDRAULIC DOUBLE-SPEED PRESS AUTOMATIC, EQUIPPED WITH PRESSURE GAUGE Hydraulic press with high-speed motor, featuring a manometer and a double-speed hydraulic power unit. Rapid approach and return are achieved using a vane pump, while the working phase operates via an axial piston pump. Equipped with a pressure adjustment valve and a three-position control lever (advance - neutral - return). The machine is supplied with oil and features a winch for lifting the working table. The piston rod is made of specially treated and chrome-plated steel. The press is fitted with a two-hand control system and concurrency protection in accordance with current safety standards. Included are rear and side safety guarding panels. Codpfefh R Nysx Afdjrd Fully CE approved, with electromagnetic compatibility. Piston stroke: 310 mm Clearance (internal opening): 1,010 mm

Stanje: novo, Leto izdelave: 2025, OMCN P30/SA hydraulic press with dual-speed manual hand pump, 30 tons. The OMCN P30/SA hydraulic press is operated manually via a two-speed hand pump and features a robust base frame for maximum stability and minimal floor space requirements. Thanks to its slotted frame, the support base is height-adjustable to 9 different positions, allowing the press to handle components of various sizes. The winch makes lifting the worktable practical and fast. +Fast approach stroke +High precision An essential tool for workshops and industrial environments, perfect for pressing metal parts such as assembling mechanical groups, fitting bearings or pulleys onto shafts. Made in Italy, CE certified, constructed with high-grade materials to ensure long-term reliability. The press can generate a force of 30,000 kg. Dimensions 2180 x 1300 x 600 mm Weight 280 kg Capacity 30 tons Distance between uprights 695 mm Ram stroke 190 mm Crsdpeklyvtofx Afdod Ram diameter 60 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 7 A, stiskalna sila: 150 t, hod: 300 mm, Oprema: CE označba, dokumentacija / priročnik, MOTORIZED DOUBLE-SPEED AUTOMATIC HYDRAULIC PRESS WITH FAST APPROACH CAPACITY: 150 TON Monolithic frame, entirely laser-cut and bolted in a pack. This feature ensures that all our presses remain deformation-resistant, even at the points of greatest stress. All components are manufactured in Italy. Hydraulic power unit with submerged ICME motor, 400 V, 50/60 Hz. Cylinders and frames manufactured in Italy. Monoblock GALTECH distributor. No. 2 unidirectional external gear pumps in aluminium by VIVOIL: one for fast approach and return (set at 20 bar), and one with pressure adjustable via handwheel for setting required power. Csdpfx Afjy E Rr Isderd Maximum pressure valve with mechanical lock to prevent overpressure. High-end 2-way CETOP MP valve block. Standard pressure gauge to display delivered power. INTECH electrical panel certified according to current regulations and with independent CE marking. Maximum Capacity: 150 TON Approach Speed (fast): 1450 mm/min Working Speed (slow): 105 mm/min Cylinder rod stroke: 300 mm Cylinder rod diameter: 110 mm Shank diameter: M30 Tank capacity: 50 liters Maximum pressure: 350 bar Voltage: 400 V Motor power: 3 kW Weight: 1300 kg

Stanje: novo, Leto izdelave: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Submerged motor power unit 400 V 50-60 Hz. - Rapid approach and return pump preset at 20 bar. - Pressure pump adjustable via handwheel to achieve the required power. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard manometer for extremely precise adjustment of delivered power. The P110 MR is the only hydraulic press featuring two uprights in a monolithic FE 510 structure, laser cut with no welds at points of maximum stress. This feature endows it with exceptional robustness. It is deformation-resistant, ensuring tight working tolerances. The P110 MR is equipped with a 30-liter tank and achieves a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 t Rapid operation capacity: 34 l/min Slow operation capacity: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Cjdpfofh R N Dox Afderd Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Stanje: novo, Leto izdelave: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T 800 - Press force: 80 tons - With semi-automatic control Control unit (99 programs with up to 16 steps each) Including bending pin (without punch) Including tool holder for dies and foot pedal - Stroke adjustment infinitely variable from 0-300 mm - Working speed adjustable Maximum working stroke: 10 mm/sec Return stroke: 20 mm/sec - Hydraulic pressure adjustable - Maximum tool height: 300 mm - Motor power: 7.5 kW - 400 Volt, 50 Hz, 3 phase - Working height: 940 mm - Enclosed table - Replaceable wear plate - Weight: 2100 kg - Bending capacities: Flat material up to 300x32 mm with Vmax Crodpjd A Nc Djfx Afded Round tube: 3/8" – 3"

Stanje: rabljeno, Leto izdelave: 1990, Press force 3 t Outreach 0 mm Stroke 200 mm Total power requirement 15 kW Machine weight approx. 4 t Space requirement approx. m JENNY - Switzerland, Automatic Double-Column Straightening Press Type RZ - 205 / 3 - 600, Year of manufacture 1990, Serial No. 86 596 Codpfx Ajt Hw Amofdord _____ Press force of upper ram 3 t Ram stroke approx. 200 mm Max. installation height 500 mm Max. clamping length of workpiece 600 mm Height of center above table approx. 210 mm Ram feed rate down 0.17 mm/sec Ram feed rate up 0.02 - 0.17 mm/sec Pump drive 15 kW Total drive power approx. 20 kW - 380 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: Machine without automatic workpiece feed, the parts (wave-shaped) are manually loaded; a Plexiglas sliding hood is located in front of the work area, manually operated. Currently equipped with 1 straightening punch and 4 pneumatic measuring stations; however, connection options are available for up to 7 measuring stations. These are longitudinally adjustable along the lower press table over a range of approx. 500 mm; the straightening punch is adjustable on the upper ram in a prism guide. 2 tailstocks on the press table, adjustable for a max. clamping length of 600 mm; the left side is motor-driven and equipped with a clamping quill, the right side with a dividing disc. Workpiece rotation via stepper motor from 10 to 100 rpm. 2 workpiece supports (prisms) on left and right for placing the workpiece. The workpiece is measured at pre-determined positions and straightened accordingly; the straightening process is monitored and controlled with the measurement device. Stroke control for pre-set ram stroke. Left tailstock powered. Original JENNY sequence controller (FMS) in a separate switch cabinet with monitor and keyboard for parameter input.

Stanje: rabljeno, Leto izdelave: 1984, Pressure 10 t Distance between uprights 500 mm Stroke 200 mm Total power requirement 10 kW Machine weight approx. 4,500 kg Space requirement approx. ... m M A E Automatic Double-Column Straightening Press with Microprocessor Control Model ADS F 10 RH Year of manufacture 1984 Serial No. 5 002 84 00 Straightening force - Upper ram pressing force 10 t Return force 7.5 t Ram stroke 200 mm Stroke speed 100 mm/s Maximum height above table 160 mm Clamping length of workpiece, approx. 600 mm Maximum installation height 600 mm Pump drive 5.5 kW Total drive power approx. 10 kW - 380 V - 50 Hz Weight approx. 4,500 kg Machine height approx. 3,300 mm Accessories / Special Equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control system with display for fully automatic straightening operation: load workpiece, measure 'bend', position workpiece at 'maximum bend at top', straightening process, control measurement (and if necessary re-straighten), eject workpiece. Credpfxet Hwwde Afdjd • Machine equipped with a short workpiece feed via lifting beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points per workpiece; 2 workpiece supports left and right, plus 1 pneumatically adjustable straightening anvil. • The straightening punches are individually actuated pneumatically • Gripper for rejected parts that can no longer be straightened, mounted at the rear Condition: good to very good – demonstration ready shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further straightening presses in stock – please enquire.

Stanje: dober (rabljeno), Leto izdelave: 2021, številka stroja/vozila: H 21-3743, Ponudba 26175 Tehnični podatki: Crsdpezh Edbjfx Afdsd - maks. stisna sila do 25 t - maks. hod bata 160 mm - vgradna višina brez ravnalne enote 675 mm - izhod do sredine bata 250 mm - velikost mize pribl. 1300 x 300 mm - delovna hitrost AB pribl. do maks. 30 mm/s - delovna hitrost do pribl. 100 mm/s - količina olja pribl. 150 l - pogon 400 V / 10 kW - dimenzije (š x v x g) pribl. 4900 x 2400 x 1500 mm - teža pribl. 3000 kg - z: - podaljšek ravnalne mize 2030 + 1520 mm - premični voziček s pritrditvami na ravnalni mizi - koničasto vpenjalo - valjčno vpenjalo - ravnalni bat - nihajno stikalo z merilnikom ure

Stanje: rabljeno, Leto izdelave: 2023, Condition: used Year of manufacture: 2023 Stock number: 7280 Delivery time: immediate, subject to prior sale Country of origin: Turkey Price: €15,700 In stock: 1 Pressing force: 100 t Cylinder fixed or movable: fixed Bending length: 1020 mm Stroke: 300 mm Clearance between uprights: 1020 mm Distance between table and tool holder: 680 mm Rapid traverse: 9 mm/s Working speed: 5 mm/s Return speed: 10 mm/s Max. bending capacity (mild steel): 6 mm Table: 500x1020 mm Pass-through hole in table: 100 mm Hole spacing: 190 mm Length: 2110 mm Width: 1000 mm Height: 2275 mm Weight: 2082 kg Demo machine / as-new condition Net price (new price €19,550.00) - 2 guides - Large ram plate and large support table with T-slots - Upper and lower tools for bending included - Pressure gauge - Rapid advance with automatic changeover to working speed - Piston stop at any position - Two-hand operation AND foot pedal - Height-adjustable table - Equipment according to CE regulations - Operating manual in GERMAN and ENGLISH PURCHASING USED MACHINERY IS A MATTER OF TRUST – OUR TRANSPARENCY PROMISE We offer you maximum security and full transparency. • HONEST INSIGHTS Detailed photos & functional videos of the actual condition • LIVE CHECK ON SITE Live test available at our facility • DIGITAL DEMONSTRATION Individual live demonstration via video call • RISK-FREE PURCHASE 14-day right of return Cjdpfx Afsynm Nmedsrd Details:

Stanje: dober (rabljeno), Kompletna serija ploščatih tiskarskih matric Csdszg Urfepfx Afdsrd Tip: 20.305 V12 - 26 stopinj 3 x 835 mm 2 x 415 mm Skupna dolžina: 3335 mm Nova bruto cena: € 3.862,-

Stanje: rabljeno, Leto izdelave: 1989, Sheet width: 150 mm Number of straightening rollers: 4 Number of feed rollers: 2 front + 2 rear Csdecxxvmspfx Afdsrd Roller diameter: 60 mm Space requirement approx.: 1.8 x 0.7 x 1.4 m

Stanje: rabljeno, Druck 100 t Hub 300 mm Zylinder 205 mm Abstand Tisch / Stößel 520 mm Tischfläche 1100x350 mm Stößelfläche 350x350 mm Gesamtleistungsbedarf 7,5 kW mit Rollenbahn, 1: Rollenbahn: 2000x500 Eingang 1. Rollenbahn: 2000x500 Abgang Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Codpfoyutqwox Afdjrd Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: rabljeno, Technical details: Pressure: 200 t Stroke: approx. 200 mm Table size: L:1200 x W:450 mm Crsdpfxou Nfrpo Afded Jaw width: 1000 x 200 mm Total power requirement: 18 kW Machine weight approx.: 15 t Machine dimensions (LxWxH): 4.5 x 1.5 x 2.2 m Carrier Straightening Press Eccentric Bending Machine - Jaw holder: LxW 1200 x 220 mm - Jaw adjustment: 200 mm, traversable - Jaw opening width: 300 mm - Manual operation - Electrical cabinet (LxWxH: 0.85 x 0.8 x 2.7 m) Accessories: - Various stops, shims, angle stops, and marking gauges Included as per list (i.D.).

Stanje: novo, Tlačna sila 200 kN Največji hod 200 mm Delovna hitrost 10 mm/s Hitrost povratka 20 mm/s Dimenzije mize 480x1060 mm Delovna višina 900 mm Največja višina orodja 200 mm Skupna potreba po energiji 2,2 kW Upogibna zmogljivost 200x12 mm Cedoy H N E Njpfx Afderd Največja upogibna zmogljivost - okroglo 48x4,0 mm Teža 500 kg Dimenzije stroja 1010x480x1120 mm Dodatki: - Avtomatski nadzor (99 programov po 16 korakov) - Z vijaki (brez utiskača) - Nosilec orodja za matrice - Nožna pedala - Matrice V-63 - Utiskač R5

Stanje: rabljeno, Leto izdelave: 1965, Druck 400 t Ausladung 1140 mm Hub 600 mm Tischfläche 2000x1000 mm Crsdpjyt R Dlsfx Afdsd Platte 4000x1000x300 mm Stößelabmessungen 2000x1040 mm Zylinder 300 mm Einbauhöhe 650 Raumbedarf ca. 3,9x4x4,2 m Maschine wurde Überholt max. Abstand Stößel bis Aufspannpaltte 1250 mm Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor; es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihren Besuch. Ihr Markus Hirsch Team

Stanje: pripravljen za uporabo (rabljen), Jenny ERP-25 ravnalna stiskalnica Tehnični podatki: 25 ton pritiska za ravnanje, hod bata 150 mm Serija 86.545 Csdszfx Iuopfx Afdjrd Teža 1.300 kg Opomba: Popolnoma delujoča, vključno z ravnalno enoto za gredi.

Stanje: novo, Stanje: novo Dobavni rok: cca 4 mesece po naročilu Država porekla: Italija Cena: 55.200 € Leasing obrok: 1.043,28 € Pritisna sila: 200 t Cedpfx Afoynnfiederd Hod: 500 mm Miza: 1000x600 mm Vgradna višina: 640 mm Hitri pomik: 21 mm/s Delovna hitrost: 2 mm/s Motor: 5,5 kW Dolžina: 1800 mm Širina: 1300 mm Višina: 2500 mm Teža: 6.400 kg 2 hitrosti Nastavljiv maksimalni pritisk Manometer

Stanje: novo, Stanje: novo Dobavni rok: cca 4 mesece od naročila Država izvora: Italija Crodpfx Aoynnfcefdod Cena: 43.200 € Leasing obrok: 825,12 €/mesec Tlačna sila: 150 t Hod: 500 mm Miza: 800 x 600 mm Vgradna višina: 630 mm Hitri pomik: 22 mm/s Delovna hitrost: 3 mm/s Motor: 4 kW Dolžina: 1.800 mm Širina: 1.200 mm Višina: 2.400 mm Teža: 4.500 kg 2 hitrosti Nastavljiv maksimalni tlak Manometer

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece od naročila Država izvora: Italija Cena: 31.400 € Leasing obrok: 599,74 €/mesec Tlačna sila: 100 t Hod: 500 mm Miza: 800x600 mm Vgradna višina: 615 mm Hitri pomik: 26 mm/s Delovna hitrost: 4 mm/s Motor: 4 kW Cedpfeynnd Sex Afderd Dolžina: 1.600 mm Širina: 900 mm Višina: 2.300 mm Teža: 3.100 kg 2 hitrosti Nastavljiv maksimalni tlak Manometer

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece od naročila Država izvora: Italija Cena: 25.000 € Leasing obrok: 480 € Pritisna sila: 70 t Hod: 500 mm Miza: 700x500 mm Vgradna višina: 600 mm Hitri pomik: 25 mm/s Delovna hitrost: 5 mm/s Motor: 4 kW Dolžina: 1400 mm Širina: 900 mm Višina: 2250 mm Codpfx Aoynnd Eofdjrd Teža: 1900 kg 2 hitrosti Nastavljiv maksimalni tlak Manometer

Stanje: novo, Stanje: novo Dobavni rok: približno 4 mesece po naročilu Država porekla: Italija Cena: 22.900 € Cjdsynndxjpfx Afdord Leasing obrok: 439,68 € Tlačna moč: 40 t Hod: 500 mm Miza: 700x500 mm Vgradna višina: 600 mm Hitri pomik: 26 mm/s Delovna hitrost: 9 mm/s Motor: 4 kW Dolžina: 1400 mm Širina: 900 mm Višina: 2200 mm Teža: 1300 kg 2 hitrosti Nastavljiv maksimalni tlak Manometer