Portalne rezkalne stroje nakup rabljenega (124)

Stanje: rabljeno, CNC Travelling Column Boring and Milling Machine ANAYAK Type HVM-3800-P Bed Type Milling Machine, design similar to a plate boring machine with fixed table Machine No.: M-20021203 Year of Manufacture: 2002 "Refurbished 2025" The machine will be workshop-refurbished in 2025 and can then be inspected at our warehouse in 37235 Hessisch Lichtenau. Travels: X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size: 3800 x 1200 mm T-slots: 8 x 22 mm, spacing 130 mm Table load max. 25 t (stationary table – almost unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (pull stud DIN 69872-B) Spindle speed: 60–4000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power supply: 400 Volt, 50 Hz, 50 kVA - Automatic 30-position tool changer - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydromechanical tool clamping - Orthogonal milling head can be fully automatically swivelled in two 45° planes – B+C axis - Control: HEIDENHAIN iTNC 530, with electronic handwheel - Prepared for wireless measuring probe (probe and receiver not included) Dedpfx Ajxcgtgobgjkp - Additional HF spindle 18,000 rpm – can be mounted - Free-standing control cabinet - Chip conveyor mounted between travelling column bed and machine table - 32,078 operating hours read - Coolant system - Freestanding hydraulic unit - Operating manual with circuit diagrams Machine footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (complete): approx. 33 t Good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 3.100 mm, pomik po osi Z: 1.600 mm, največja hitrost vretena: 3.500 obr/min, Parametri stroja - glej fotografijo Os X - 5000 mm Os Y - 3 100 mm Os Z - 1 600 mm Dodpfxjy U Ngvs Abgskp Krmilni sistem Siemens 840 D

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, potovalna razdalja osi X: 4.500 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.000 mm, največja hitrost vrtenja: 3.000 obr/min, cnc Heidenhain TNC 426 Dkedpfxszh U Hfo Abgsp menjalnik za 30 orodij vreteno SA 50 maksimalna hitrost vretena 3000 vrt/min tabela 6000x1100 mm hodi 4500x1200x1000 mm odvajač ostružkov

Leto izdelave: 1989, stanje: rabljeno, x-axis travel: 1100 mm y-axis travel: 600 mm z-axis travel: 500 mm Control: Heidenhain TNC 335 B* Tool holder: SK40 Table surface, top: 1650 x 700 mm Table surface, bottom: 1870 x 300 mm Spindle speed: 3000 rpm Spindle drive: approx. 9 kW *Control unit defective!!!!! Dkjdpfod Ih Rxsx Abgsp Horizontal and vertical milling Head position change is manual-hydraulic Vertical head with quill, drilling depth 100 mm

Leto izdelave: 1999, stanje: dober (rabljeno), Used travelling column bed milling machine > Manufacturer: Kekeisen Dedpfxom Twc Te Abgokp > Model: 1200/8 > Year: 1999 > Equipped with Heidenhain TNC 426 > Spindle taper: SK40 > With 30-position automatic tool changer > Spindle speed: 20–7300 rpm > Rapid traverse: 0–30 m/min > Travel paths: > X-axis: 1200 mm > Y-axis: 500 mm > Z-axis: 800 mm > Milling head can be automatically swivelled to vertical and horizontal positions > Drive power: 28 kW > Weight: 12 tons

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.400 mm, dolžina pomika po osi Y: 650 mm, dolžina podajanja os Z: 850 mm, največja hitrost vretena: 3.000 obr/min, sprednja in navpična os Dksdpfxsxhfmij Abgsp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, x-axis travel: 6000 mm y-axis travel: 2100 mm z-axis travel: 1500 mm Control: HEIDENHAIN iTNC 530 Dksdpfx Abevwgl Aogjp Feed rate: 2-20 m/min Spindle speeds: 20 - 4000 rpm Table dimensions (longitudinal): 7000 mm Table dimensions (cross): 2000 mm Total power requirement: 79 kW Machine weight: approx. 55 t Space requirements: approx. 15 x 7 x 4.6 m The SORALUCE FP6000 is in very good condition. Optional accessories: # Clamping angle: €5,000 # Clamping cube: €2,000 # Various tools & workbench: €2,000 Description: - CNC Control: HEIDENHAIN ITNC 530 Orthogonal milling head: • Tool holder: ISO 50, DIN69871 AD • Automatic tool clamping: clamping force 20,000 N • Indexing/repeatability accuracy: ± 3 seconds == ± 0.002 mm • Retention knob: DIN 69872 Form A • Number of swivel positions: 1 x 1° milling head (360 positions rear plane, 270 positions front plane) • Spindle bearing diameter: 90 mm • Purge air: 0.7 bar Main drive: • Drive type: three-phase motor • Drive power: 32 kW at 100% duty cycle Spindle: • Spindle speed: 20 - 4000 rpm • Full power available from: 340 rpm • Torque at 32 kW/S1: 910 Nm • Speed control: 2 ranges, infinitely variable via star/delta switching Rapid traverse: max. 35,000 mm/min

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F 36905, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.300 mm, največja hitrost vretena: 2.000 obr/min, model krmilnika: HEIDENHAIN TNC 360, DÉTAILS TECHNIQUES Course axe X : 7 000 mm Course axe Y : 1 200 mm Course axe Z : 1 300 mm Avances rapides x/y/z : 10 m/min Dimension de la table : 8 000 x 1 300 mm Charge admissible sur table : max. 4 t/m² Dksdpfx Asy Rrbhjbgsp Tête universelle : 5x90 plus 1 manuel Porte-outil : SK 50 Plage de vitesses de broche de fraisage : 20 - 2 000 tr/min Puissance d'entraînement : 30 kW Couple à la broche : boîte à 2 vitesses, 750 Nm DÉTAILS MACHINE Commande : HEIDENHAIN TNC 360 Puissance totale requise : 50 kW Dimensions & Poids Encombrement env. : 9,0 x 3,8 x 4,6 m Poids machine env. : 25 t ÉQUIPEMENT Tête de fraisage orthogonale, refroidie à l'eau Palpeur radio 3D M&H 20.41 Cloison pour travail/préparation en parallèle Soufflage interne Arrosage interne sous pression 15 bar Adaptateur pour broches de fraisage grande vitesse avec support de couple Plateforme opérateur suiveuse Convoyeur à copeaux Manivelle électronique HR 410 Barrières de sécurité surveillées Divers accessoires en option (têtes de fraisage angulaire, brides, etc.)

Stanje: novo, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 3.000 mm, položaj glave za glodanje: Universal-Diagonal-Fräskopf, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, hitrost pomika os X: 20.000 m/min, hitrost podajanja osi Y: 20.000 m/min, hitrost podajanja os Z: 20.000 m/min, največja hitrost vretena: 6.000 obr/min, vrtilni razpon: 1 °, dolžina mize: 9.000 mm, širina mize: 2.000 mm, vrtilni moment: 1.288 Nm, dovod hladilne tekočine: 36 letvica, moč vretenovega motorja: 40 W, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, LAGUN ML 8 Travelling Column Milling Machine The LAGUN ML 8 is a highly dynamic travelling column milling machine designed for the precise machining of large and complex workpieces. Ideal for both single-part production and series manufacturing where highest demands are placed on accuracy, stability, and flexibility. Your benefits at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Leasing / financing available ✔ High flexibility thanks to travelling column design ✔ 24 months warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in building milling machines. These machines impress with their reliability, ease of maintenance, and economical operation. Technical specifications: Control system: HEIDENHAIN TNC 7 digital path control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Tool changer: Automatic tool changer (ATC), 60 positions Dsdpfxsh Ekucj Abgekp Chip removal: Hinged belt conveyor Enclosure: Three-sided perimetric enclosure Accuracies: Positioning accuracy: ±0.050 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare a customised offer

Stanje: rabljeno, Butler Elgamill CNC portalna posteljna rezkalnica z gibljivo kolono, X prehod 5000 mm. T-režasta miza 8.000 mm x 1.030 mm. Pomik kolone X 6.200 mm (za potrditev). Pomik rama Y 1.250 mm (za potrditev). Vertikalni pomik glave Z 1.950 mm (za potrditev). Hitrosti vretena različne, maksimalno (za potrditev). Konus vretena 50. Pogonski motor vretena HP (za potrditev). Napajanje po horizontali in vertikali 6–500 mm/min. Hitri pomiki v vseh smereh 2.000 mm/min. Vključno z: Heidenhain CNC upravljanjem, ročna indeksirna glava. Podatki o stroju: Masa 20.000 kg. Dkjdpfxeyx Hv As Abgsp

Stanje: rabljeno, Leto izdelave: 2016, x-travel: 4,500 mm y-travel: 1,300 mm z-travel: 1,800 (2,300) mm Control: iTNC 530 HSCI Heidenhain Tool holder: ISO 50 DIN 69871 AD Spindle speeds: 20 – 6,000 rpm Spindle motor: 43 kW Dkodpfx Absy Umagegep Torque: 900 Nm Table clamping surface: 6,000 x 1,100 mm T-slots: 6x 22 H12 mm T-slots REF: 1x 22 H7 mm T-slot pitch: 140 mm Number of tool stations: 40 positions Tool holder: ISO 50 DIN 69871 Max. tool diameter: 125 mm Max. tool diameter with free adjacent pocket: 250 mm Max. tool length: 400 mm Max. tool weight: 20 kg Tool change time: 10 sec Rapid traverse (X / Y / Z): 35,000 mm/min Feed force (X / Y / Z): 16,000 N Acceleration X: 1 | Y:1.5 | Z: 2 m/s² Total power requirement: 57 kW CNC Fixed Bed Milling and Drilling Center SORALUCE - SLP 6000 - Automatically indexing milling head with 0.001° x 0.001° increment in two axes - Tool clamping force: 20,000 N - "Dynamics Active Stabilizer" preparation - Dynamic Collision Monitoring software (DCM) - Interpolation turning - INA linear roller guide system RUE55-E-L (X/Y/Z-axis) - Hydromechanical damping slides (Y/Z-axis) - Rack and pinion drive (X-axis) - Ball screws (Y/Z-axis) - Heidenhain AC servo motors with digital drive technology - Ventilated direct linear measuring system Heidenhain - 3D thermal growth compensation for all milling head positions - Automatic feed control - Increased accuracy via Soraluce 3D milling head compensation - Preparation for NC rotary table for 5-sided machining - Tool changer function: loading/unloading during automatic operation - Adaptive Control - Accura Heads option - DXF converter - Interpolation turning Heidenhain - Splash guard enclosure (2x front doors, 2,500 mm)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Soraluce model FL8000 – visokozmogljiv premični CNC rezkalni stroj tipa portal s talno postavitvijo POTEK (X): 7.500 mm POTEK (Y): 1.400 mm POTEK (Z): 1.000 mm HITROST POMIKA (X, Y, Z): 25.000 mm/min DELOVNI PODROČJE POMIKA (X, Y, Z): 1 – 10.000 mm/min POSPEŠEK (trenuten, ne maksimalen): 1 m/s² OBRATI VRETENA: 20 - 4.000 min⁻¹ KONUS VRETENA: ISO 50 MOČ VRETENA: 28 kW Krmilje NC15C – HEIDENHAIN iTNC 530 (ravni 15,1" TFT zaslon z digitalnimi pogoni). Enoprocesorska verzija. Sistem pripravljen za 10 motorjev (9 CNC osi + motor vretena). Glavna tipkovna konzola z ločenimi tipkami za pomik vsake linearne osi (X+, X-, Y+, Y-, Z+, Z-) Možnost K20 smarT.NC za i530M. Neodvisni AC servomotorji s Heidenhain digitalnimi pogoni za vsako os HEIDENHAIN HR-410 prenosna elektronska ročna stikalnica s 5m spiralnim kablom Samodejno vrtljiva glava 28 kW, 760 Nm, 0,001° x 0,001°, 4.000 min⁻¹. Neprekinjen sistem mazanja ozobljenih delov glave z oljno meglo in zrakom. Samodejna naprava za vpenjanje orodja – 15.000 N. Samodejna hidravlična naprava za izmet orodja Vreteno: BT50 konus Visokonavorni motor vretena 28 kW, 100% ED, digitalni motor. R10 – ZF dvo-stopenjski menjalnik s hladilno enoto Območni obratovalni razpon vretena: 20 – 4.000 min⁻¹ Hiter pomik osi X-Y-Z: 25.000 mm/min Delovni pomik osi X-Y-Z: 0 - 10.000 mm/min Stopnja pospeševanja osi X-Y-Z: 1 m/s² (trenutno, ne maksimalno) Hidravlični kompenzacijski sistem za glavo/ramo Pogonski sistem osi X z dvema servomotorjema, dvema menjalnikoma in dvojnim zobatim letevjem Prednapete kroglične vretena z dvojnimi povratnimi maticami na oseh Y in Z. Samodejni centralizirani sistem mazanja. Dkedpfow U Tlzox Abgep Linearni vodilni sistem z re-cirkulirajočimi valjčnimi vodili po vseh oseh. Samodejni centralizirani sistem mazanja vodil. HEIDENHAIN linearne merilne letve na oseh X-Y-Z z izpihovalnim sistemom s stisnjenim zrakom – (natančnost +/- 0,005 mm) H48 – hlajenje skozi vreteno, tip AD. M3 – avtomatski menjalec orodja s 40 postajami. M6 – možnost menjave orodij vodoravno-navpično. M8 – motorna menjalna naprava za orodja. Menjalec orodij poganja servomotor Hidravlična oprema Prednja kovinska rolo zavesa za zgornji in spodnji del glave/rame skupaj s stransko kovinsko zaščito med delovno mizo in zadnjo podporo vodila, kar ščiti navpična gibanja rame. CE10 - ZAŠČITA na zadnji in obeh stranskih delih kolone stroja P20 - Operaterska platforma pritrjena na kolono in se pomika z njo v smeri osi "X". Glavna nadzorna konzola je v območju operaterske platforme za stroje brez obešenega pulta in je dostopna z zadnje strani stroja. D7 + D50A – sistem za hladilno tekočino s 1000 l posodo z dvema črpalkama za visok in nizek tlak (5 in 12 bar), pretok 50 l/min. Papirno in magnetno filtriranje. E30A – transportni trak za odrezke FL8000, členkasti transporter, širina 350 mm PW11B – nihajni delovni sistem. PM2 x 2 – stroj pripravljen pri Soraluce za vgradnjo dveh rotacijskih miz. Razsvetljava v delovnem območju. Hladilni sistem elektro omare Razsvetljava elektro omare Delovanje skladno s CE varnostnimi predpisi Filter za elektromagnetno kompatibilnost Zaščita obeh strani kolone z varnostnimi odbijači Sidralni vijaki Standardna barva – modra RAL 5005 / siva RAL 7035 K19 – dva izvoda dokumentacije stroja (ena tiskana kopija, ena na CD-ROM) Talna plošča 8.000 x 1.500 x 300 mm

Stanje: rabljeno, Leto izdelave: 2010, X-axis travel: 2,600 mm y-axis travel: 700 mm z-axis travel: 700 mm Control: Heidenhain iTNC 530 Dkjdpfx Abev Dxxnegjp Spindle speed range – main spindle: 20 – 18,000 rpm Drive power – main spindle: 35 / 25 kW Tool holder: SK 40 Clamping table surface: 2,900 x 700 mm Max. table load: 2,150 kg Number of tool stations: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with vacant adjacent pocket: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Rapid traverse (X / Y / Z): 40 m/min Max. feed rate: 40,000 mm/min Max. feed force: 8 kN Total power requirement: 54 kVA Machine weight: approx. 14.4 t Required space: approx. 8.0 x 5.6 x 2.8 m CNC travelling column milling machine DECKEL MAHO – DMF 260 New Design - NC rotary table (A axis) - Operating hours: 18,709 spindle hours - Overhauled spindle installed (Dec 2023) - Z-axis counterbalance replaced (Feb 2023) - Production package - Option: tool clamping for pull studs - WITHOUT vises!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Heidenhain TNC 430 PA CNC Maximum spindle torque: 900 Nm Maximum feed force in axes X, Y, Z: 25,000 N Maximum workpiece weight: 2,500 kg (at 1 m table length) Table size: 1,000 × 14,000 mm Number of T-slots in table: 7 T-slot width × spacing: 22H7 × 140 mm Longitudinal travel (X): 12,000 mm Cross travel (Y): 1,000 mm Vertical travel (Z): 1,500 mm Horizontal spindle: Minimum distance between horizontal spindle axis and table surface: 275 mm Maximum distance between horizontal spindle axis and table surface: 1,775 mm Vertical spindle: Djdpfx Aexdwkfobgokp Minimum distance between vertical spindle front face and table: 50 mm Maximum distance between vertical spindle front face and table: 1,550 mm Spindle taper: ISO 50 Spindle diameter: 85 mm Tool clamping force in spindle: 16,500 N Main machine dimensions Length: 17,850 mm Width: 5,640 mm Width with enclosure: 6,720 mm Height: 4,350 mm Floor space required: 73 m² Total machine weight: approx. 34,000 kg Weight of electrical cabinets: approx. 820 kg Mains voltage: 50 V (3 × 400) Total machine power: 100 kVA Fuses to be installed by the customer outside the machine for 400 V Hydraulic unit weight without oil: 150 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 3.000 h, potovalna razdalja osi X: 6.100 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 950 mm, CNC Portalna rezkalna stroj – popolnoma obnovljen s strani REM (2021) Zmogljiv in vsestransko uporaben težki rezkalni stroj, ki so ga REM-jevi strokovnjaki v letu 2021 v celoti posodobili z najnovejšo krmilno enoto Heidenhain TNC 320. Pripravljen za takojšnjo uporabo v proizvodnji. GLAVNE TEHNIČNE SPECIFIKACIJE: • X-os (prečni pomik): 6.000 mm • Y-os (vertikalni pomik glave): 2.000 mm • Z-os (osni pomik sani): 950 mm • Dvojna vretena | Rotacija glave: 360° • Hitrost vretena: 1.000 – 4.000 min⁻¹ • Konus vretena: ISO 50 (samodejno zaklepanje/odklepanje) Dodpfx Aon D N H Tsbgskp • Dimenzije glave: 290 × 290 mm • Moč motorja vretena: 15 kW (DC) • Teža stroja: pribl. 32 t • CNC krmilje: Heidenhain TNC 320 ZAKAJ IZBRATI REM? ✔ Stroj v celoti pregledan in preizkušen v delovnem stanju ✔ Sodobna CNC nadgradnja – nova električna napeljava, novi pogoni ✔ Na voljo dokumentacija in tehnična podpora ✔ Izvoz po vsem svetu | Konkurenčne cene pošiljanja Idealno za obdelavo težkih komponent v letalski, energetski in težki industriji. Kontaktirajte nas za popolne tehnične podatke, fotografije in video predstavitev.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, Prenovljeno: 2026 Numerično krmiljenje: SIEMENS 840D Tehnične lastnosti Dimenzije Dimenzije mize: po izbiri Število T-ut: nedefinirano Dimenzije T-ut: nedefinirano Pomiki osi Premik X osi: 10.000 mm Premik Y osi: 1.500 mm Premik Z osi: 2.500 mm Vertikalna kapaciteta (VC): 0 / 2.500 mm (nastavljivo) Glava za rezkanje Tip glave: Univerzalna avtomatska indeksacija UAD (0,1º) Sistem vpenjanja orodja: Hidravličen Djdpsyvwchofx Abgjkp Konus: ISO 50 (DIN 69871) / vpenjalni vijak: DIN 69872 Območje vrtljajev: 20 – 6.000 /min Moč vretena: 30 kW Pomikalne hitrosti Hitrost hitrega pomika (X / Y, Z): 30.000 mm/min Teža in dimenzije Maksimalna obremenitev mize (kg/m2): po izbiri Približna teža stroja: 70.000 kg Približne dimenzije stroja: 17.560 x 12.800 x 4.270 mm Dodatna oprema Zaščita: nihajna z avtomatskimi sprednjimi vrati in obodno varnostno mrežo Avtomatski menjalec orodja: ATC80 z elektro motorji Transporter za odrezke: 1 spredaj vzdolžno in 1 prečno Elektronski ročni upravljalnik: 6FX2007-1AE14 Siemens Hladilno sredstvo: eksterno in interno z visokim pritiskom skozi vreteno Upravljalska omara: nastavljiva v vertikalni osi Ostale tehnične značilnosti 2 ROTACIJSKI MIZI: Model: DEMMELER DRLTS1800 Delovna površina mize: 2.400 x 1.800 mm Maksimalna obremenitev mize: 40 t Število T-ut: 9 Dimenzije T-ut: 22 mm Rotacijska os: Hidrostatična Maksimalna hitrost (S1/S6): 3,4 / 5,4 rpm Zadržan moment: 175.000 Nm Os W: 1.500 mm Maksimalna hitrost podajanja: 20.000 mm/min Število vodil os W: 4 Prodajni pogoji Garancija: 6 mesecev na mehanske dele Cena in prodajni pogoji: na zahtevo Preglejte vse tehnične lastnosti

Stanje: novo, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 2.000 mm, položaj glave za glodanje: Universal-Diagonal-Fräskopf, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, največja hitrost vretena: 6.000 obr/min, vrtilni razpon: 1 °, dolžina mize: 9.500 mm, širina mize: 1.100 mm, vrtilni moment: 1.178 Nm, obremenitev mize: 62.000 kg, dovod hladilne tekočine: 36 letvica, teža obdelovanca (maks.): 62.000 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, LAGUN CM 8 Travelling Column Milling Machine The LAGUN CM 8 is a highly dynamic travelling column milling machine designed for the precise machining of large and complex workpieces. Ideal for both single-part and series production where the highest demands are placed on accuracy, stability, and flexibility. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Lease purchase / financing available ✔ Maximum flexibility thanks to travelling column design ✔ 24 months warranty Why LAGUN: LAGUN is one of Spain's leading machine tool manufacturers (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in milling machine manufacturing. Their machines are distinguished by reliability, ease of maintenance, and economical operation. Technical features: Control system: Two HEIDENHAIN TNC 7 controls – one at the front of the machine and one at the rear inside the enclosure 2 x HEIDENHAIN TFT screens 19" HEIDENHAIN motors, measuring systems, and electronic handwheels HR-510 Cooling: Dodpfxem Tv D Ae Abgekp Through-spindle coolant supply (IKZ) 36 bar Tool changer: Automatic tool changer (ATC), 60 positions Chip removal: 2x hinged belt conveyors Preparation: Prepared for rotary table / 4th axis Enclosure: Three-sided perimetric enclosure Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Your benefits as a JMT customer: ✔ Official LAGUN sales partner in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we’re happy to advise you and prepare your individual offer

Stanje: rabljeno, Os X (vzdolžna): 800 mm Os Y (prečna): 400 mm Os Z (navpična): 300 mm Dolžina mize: 1340 mm Širina mize: 300 mm Maksimalna hitrost vrtenja vretena: 2500 o/min Dedpfxew Tyyis Abgskp Moč motorja vretena: 3 kW Dimenzije (D x Š x V): 1800,0 × 2000,0 × 2080,0 mm Teža: 2050 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 2.500 mm, hitro pomikanje X-os: 35.000 m/min, hitri pomik os Y: 40.000 m/min, hitri pomik na osi Z: 40.000 m/min, skupna širina: 5.800 mm, skupna višina: 4.500 mm, skupna dolžina: 13.500 mm, dolžina mize: 10.000 mm, širina mize: 1.250 mm, Travelling column – high performance, precision, and metal removal capacity Linear RAM guide combined with HDS hydrostatic guidance ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with high-pressure coolant (IKZ) 15 bar Chip conveyor Djdpfx Abeyr Dmdogskp BLUM 3D touch probe Wide bed, linear guided in X-axis, traverse path W = 930 mm Rotary table drive prepared in control cabinet X-axis: 8,000 mm Y-axis: 1,300 mm Z-axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: 40 ISO/Bt/Mk X-axis feed: 35,000 mm/min Y-axis feed: 40,000 mm/min Z-axis feed: 40,000 mm/min Milling head auto-index: 0.001 x 0.001 degrees Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual conditions are implied. We recommend verifying all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.400 mm, hitrost pomika os X: 30.000 m/min, hitrost podajanja osi Y: 30.000 m/min, hitrost podajanja os Z: 30.000 m/min, največja hitrost vretena: 2.000 obr/min, dolžina mize: 4.000 mm, širina mize: 2.000 mm, CNC Bed-Type Milling Machine SACHMANN RAMBAUDI - MP-212 HS KOSMO 3 Universal Milling Head SK-50, 0.02°, 1195 Nm Spindle Extension L = 600 mm with 2000 rpm 3D Probe MP60 ATC Chain with 80 positions Coolant System 1320 l, 4.8 bar Dodpfx Aox Nh H Debgjkp Rotary Table 2000 x 1600 x 15 t V-Axis (Feed) 1500 mm Rotational Speed 3 rpm Heidenhain RON 700 Rotary Encoder for Table Rotation Ram Size 500 x 500 mm with 56 kW Chip Conveyor X-Axis: 6000 mm Y-Axis: 2000 mm Z-Axis: 1400 mm Table Length: 4000 mm Table Width: 2000 mm Table Load Capacity: 25,000 kg Spindle Motor Power: 37 kW Spindle Speed: 2000 rpm Tool Holder: 50 ISO/BT/MK Feed Rate X-Axis: 30,000 mm/min Feed Rate Y-Axis: 30,000 mm/min Feed Rate Z-Axis: 30,000 mm/min Automatic Milling Head Index: 2.5 x 2.5° Length: 15,000 mm Width: 8,000 mm Height: 6,000 mm Weight: 85,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. They therefore do not constitute representations or contractual terms. We recommend verifying all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 3.100 mm, pomik po osi Z: 1.600 mm, hitrost pomika os X: 25.000 m/min, hitrost podajanja osi Y: 25.000 m/min, hitrost podajanja os Z: 25.000 m/min, največja hitrost vretena: 4.000 obr/min, dolžina mize: 8.000 mm, širina mize: 2.500 mm, obremenitev mize: 15.000 kg, Chain-type tool changer with 80 positions Dsdpfxexm Sudj Abgjkp Rotary table 1500 x 1500 mm with V-axis 1500 mm Table load capacity: 15,000 kg Optional box table 3500 x 1000 x 1000 mm Electrically powered X-axis travel: 8,000 mm Y-axis travel: 3,100 mm Z-axis travel: 1,600 mm Table length: 8,000 mm Table width: 2,500 mm Table load capacity: 15,000 kg Spindle power: 43 kW Spindle speed: 4,000 rpm Tool holder: 50 ISO / BT / MK X-axis feed rate: 25,000 mm/min Y-axis feed rate: 25,000 mm/min Z-axis feed rate: 25,000 mm/min Control system: iTNC530 Milling head auto-index: 2.5 x 2.5° Length: 14,000 mm Width: 6,000 mm Height: 6,000 mm Weight: 68,000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contractual terms. We recommend verifying all critical details.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Dedpfxorx Rxtj Abgjkp Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 16.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 1.500 mm, Head mounting station TUPC CNC micro-indexing head Dkedpfexpfkkox Abgop A axis: 360,000 x 0.001 mm C axis: 360,000 x 0.001 mm SELS spindle extension L=500 mm CTS internal coolant supply ATC chain tool changer with 60 positions Hydrostatic guideways Optional T-slot plates 5600 x 1875 mm (2x) + 4000 x 1875 mm X-axis travel: 16,000 mm Y-axis travel: 3,500 mm Z-axis travel: 1,500 mm Spindle power: 80 kW Spindle speed: 4,000 rpm Tool holder: SK59 ISO/BT/MK X-axis feed rate: 25,000 mm/min Y-axis feed rate: 25,000 mm/min Z-axis feed rate: 25,000 mm/min Milling head auto-index: 2.5 x 2.5° Length: 24,000 mm Width: 6,500 mm Height: 6,500 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, no warranties or contract terms are implied. We recommend that you verify all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 3.300 mm, pomik po osi Z: 1.500 mm, Manufacturer: SORALUCE Model: FS 8000 Control: Heidenhain iTNC 530 Year of manufacture: 2006 Dkjdpfx Absxc Emxogjp ATC Chain with 40 positions Maximum tool size: Ø 125 x 400 mm Machine prepared for rotary table Chip conveyor Central lubrication Travel with vertical head rotated: 3,300 mm Specifications Metric / US Standard X-axis: 8,000 mm Y-axis: 2,800 mm Z-axis: 1,500 mm Spindle power: 30 kW Spindle speed: 5,000 rpm Tool holder: 50 ISO/BT/MK X-axis feed rate: 15,000 mm/min Y-axis feed rate: 15,000 mm/min Z-axis feed rate: 15,000 mm/min Milling head auto-index: 2.5 x 2.5° Dimensions (approximate) Length: 17,500 mm Width: 4,050 mm Height: 5,020 mm Weight: 38,400 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, these details do not constitute representations or contractual terms. We recommend verifying all critical details independently.

Stanje: dober (rabljeno), Leto izdelave: 2001, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.460 mm, dolžina mize: 3.800 mm, širina mize: 1.000 mm, obremenitev mize: 30.000 kg, Chip conveyor Double doors on the front side Chain-type tool changer (30 positions) Central lubrication system High-pressure coolant system 16 bar and 2.2 kW, flow rate 16 l/min Tool clamping force: 1968 daN Complete documentation and machine from first owner X-axis travel: 3200 mm Y-axis travel: 1200 mm Z-axis travel: 1460 mm Table length: 3800 mm Table width: 1000 mm Table load capacity: 30,000 kg Spindle power: 41 kW Spindle speed: 3,000 rpm Tool holder: ISO 50 / BT / MK Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Dodpfx Aoxc Hh Debgokp Auto-indexing milling head: 2.5 x 2.5° Operating hours: 10,659 h Length: 8,820 mm Width: 6,250 mm Height: 3,910 mm Weight: 33,000 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, wherever possible, obtained from the manufacturer. The details are given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all important details.