Potovalni rezkalni stroj

SHW UniForce 6 - X = 16.000 mm

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.700 mm, pomik osi Y: 2.250 mm, pomik po osi Z: 1.300 mm, skupna širina: 3.000 mm, skupna dolžina: 8.710 mm, skupna višina: 5.250 mm, premer vretena: 130 mm, obremenitev mize: 16.000 kg, dolžina mize: 2.200 mm, širina mize: 2.200 mm, skupna masa: 40.000 kg, Accessories: 2 different heads 1 faceplate Nodpfxjw Hr Hpo Adyowb

Stanje: rabljeno, Leto izdelave: 2008, Obrat nad posteljo 923,8 mm Obrat nad prečno sani 755 mm Maks. premer struženja 356 mm Maks. dolžina struženja 510 mm X/Z pomiki 260/590 mm Vretenasti obrati 5000 obr/min Revolver z 12 postajami Premer vretenaste luknje 73 mm Krmiljenje: MSX-850 III Opremljeno z: Vpenjalna oprema s kleščami Odvajač odrezkov 3 standardni nosilci za orodje Nedpju Sn Hzjfx Adyjwb Brez portalnega nakladalnika (ni vključen).

Stanje: novo,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 66.600 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We offer you the following: Technical data: Controller: Heidenhain iTNC 530 HSCI Travel ranges: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline control - Direct measuring systems in NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Prepared for 3D quickSET - Scraper belt chip conveyor - ICS (internal coolant supply), 40 bar, 600l tank, incl. rotating inspection window, barrier air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through the center of the spindle - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero point clamping system - Selection/deselection of handling system via switch on the machine control panel - Incl. additional rinsing in the working area - Incl. machine preparation for job management - Incl. control panel arrangement left - Energy supply to the machine table incl. two-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Incl. rotary union extension to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. Nwedpfxoxgnz Tj Adyob The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, pictured tools, and clamping devices are included in the delivery only if explicitly stated in the additional information. Technical data, specifications, and prior sale subject to change and errors!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GS1000/5-T, največja hitrost vrtenja: 30.000 obr/min, skupna masa: 15.500 kg, Letnik izdelave: 2014 Nsdpew Awmtofx Adyswb Stanje: zelo dobro Magazin: 66 x HSK63 Krmiljenje: Heidenhain 530 Vreteno: n=30.000 V mizi integriran Erowa sistem ničelne vpenjalne točke Erowa robot easy 250 avtomatizacija s 6 paletami 3D merilni sistem Oljno-zračna mazalna enota za visokofrekvenčno vreteno Lasersko merjenje Delovne ure vretena:

Leto izdelave: 1990, Stanje: dober (rabljeno), CNC 4th Axis Make: NIKKEN Type: CNC-200 Year: 1990 Nedpfx Adogabu Ujyswb with tailstock and base plate.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, x-axis travel 800 mm y-axis travel 600 mm z-axis travel 500 mm OFFER We can offer you the following ex-stock, subject to prior sale and errors excepted, without obligation: HERMLE 5-Axis Universal Machining Center in gantry design with swiveling rotary table Model C 800 U Year of manufacture 1998 12648 _____ Milling head travel longitudinal X-axis 800 mm Milling head travel transverse Y-axis 600 mm Milling head travel vertical Z-axis 500 mm NC swivel axis A-axis -20 / +90 ° NC rotary table C-axis 360,000 ° Maximum projection of vertical spindle approx. 600 mm Max. installation height under spindle approx. 100 / 600 mm Table size (swing diameter Ø 630 mm) 540 x 540 mm Max. table workpiece weight approx. 300 kg Spindle taper SK 40 Spindle speeds, infinitely variable 18,000 rpm Feeds/rapid traverse, infinitely variable 2 – 35,000 mm/min. Feed force approx. 11/16 Nm Spindle drive 15 kW Total power consumption approx. 37 kW - 400 V - 50 Hz Weight approx. 8,000 kg Accessories / Special equipment: • Compact, modified gantry design with 3 axes in the milling head for feeds up to 35 m/min. All drives and guides positioned outside the working area. • Machine bed made from mineral cast with high damping properties, can be installed without foundation, with high static and dynamic stability. • SIEMENS 5-axis path control, Type 840 D, with graphics and all modern programming features for full 5-axis machining of complex workpieces with electronic handwheel • NC Swiveling Rotary Table (C-axis 360,000° / B-axis -20/+90°) Ø 630 mm • Robust vertical head with HERMLE milling spindle up to 18,000 rpm with automatic swiveling nozzle block • Tool changer with extended (auxiliary) magazine for up to 87 tools Nedpfox Dndcex Adyewb • Coolant system with chip conveyor, oil mist extraction with filter, complete enclosure • Extensive accessories including approx. 50 tool holders, operating manuals. Condition: Very good – machine under power and ready for demonstration A video of the machine will be available here shortly (please click on the link): C 800 U/4 Delivery: ex stock – immediate availability, FCA Metzingen Payment: strictly net – immediately upon receipt of invoice, prior to delivery of the machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Njdpfew Ucyusx Adyjwb Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: rabljeno, Leto izdelave: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected at our facility. Ex works, loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X, Y, Z axes: 1250 x 1000 x 1000 mm Feed rate X, Y, Z axes: 20 - 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-Axis travel: 360 x 0.001° B-Axis feed rate: 10,800°/min Max. table rotation speed: 30 rpm Nwodpow Ew T Sofx Adyeb Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800 x 800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Accessories: - Chip conveyor with coolant tank - Coolant system - 4x machine pallets - Tool magazine - Oil mist extraction - Various new spare parts: 1x Y-axis length measuring system (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear unit P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox F1C-A25 (new) 1x retrofit kit power module (new) 1x lifting devices for the machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Machine hours Machine power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Nwedpfxewywcio Adyob Drives linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Workspace enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra charge: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition, and still under power for inspection! The photos are for illustration purposes and show a new machine of this type. Original photos will follow shortly!