Odbijači, vlečne in rezkalne stroje nakup rabljenega (174)

Leto izdelave: 2000, Stanje: rabljeno, številka stroja/vozila: 3167, Clearing force: 16 t Gcodpfx Absccxqto Tsa Lift: 1600 mm Weight: 8.5 t

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, premer obdelovanca (maks.): 900 mm, hod: 2.000 mm, vrsta upravljanja: Krmiljeno s PLC krmilnikom, TECHNICAL DETAILS General Data Pulling force: max. 9 t Total power requirement: 25 kW MACHINE DETAILS Machine type: Electromechanically driven internal vertical broaching machine FSR Special features: Designed pull bridge to accommodate standard market broaching tool holders Drive: Ball screw drives and hardened, ground round guides with controllable three-phase motors for smooth operation EQUIPMENT Gcjdpewx Ifxjfx Ab Tea Feed rates available Shim control available Sliding tables available Preparation for automation and integration into linking systems available

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), An old Schumag Aachen drawing machine without control system is available. Drawing force: 100 kN, drawing speed: 80 m/min, material diameter range: 25 mm - 43 mm. An on-site inspection is possible. Gsdpfx Aev Tctusb Tsca

Stanje: zelo dobro (rabljeno), Orodje za rezkanje utorov, igla za rezkanje utorov, specialno orodje, orodje za izdelavo utorov, stroj za izvlačenje utorov, stroj za vtiskovanje utorov, orodje za vtiskovanje utorov, vtisna igla za vtiskovanje utorov -Proizvajalec: SWZ, vtisna igla za vtiskovanje utorov Gcedoitt Ryjpfx Ab Tea -Tip: B 6 J9x1,8 RL 24-72 mm -Kataloška št.: 45 0014 -Širina: 6 mm -Količina: 2x igli za rezkanje utorov na voljo -Cena: na kos -Gabaritna dimenzija: 900/6/H13 mm -Teža: 0,5 kg/kos.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 11.000 kg, skupna dolžina: 80.510 mm, skupna širina: 42.180 mm, skupna višina: 2.500 mm, LASER za rezanje pločevine in cevi Gcodpfsxlk U Hex Ab Tja

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, Information available upon request. Gjdpswbudgsfx Ab Tjca

Leto izdelave: 1981, Stanje: rabljeno, številka stroja/vozila: 142, Aumat M320 14,873 operating hours Mains voltage: 380 Volt / 50 Hz Control voltage: 220 Volt / 50 Hz Signal voltage: 24 Volt Power: 15 kW / Current: 40 A Wiring diagram: No. 142.006.3 Counter-pressure broaching slide: 20–30 bar Guide slide: 40–45 bar Broaching pressure: 13–90 bar Counter-pressure guide slide: 20–25 bar Gjdpfx Aboc Swche Teca Vickers hydraulic unit Order number: 626376 Wiring diagram number: 1420032 With chip conveyor Broaching stations: 3 With accessories

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, številka stroja/vozila: 25, premer obdelovanca (maks.): 40 mm, skupna dolžina: 1.700 mm, skupna širina: 2.400 mm, skupna višina: 4.770 mm, hitrost rezanja: 60.000 mm/min, TECHNICAL DETAILS Performance Data Maximum traction force: 25 kN Maximum stroke: 1,000 mm Return stroke speed: 20 m/min Maximum shank diameter: 40 mm Clamping plate: 320 mm MACHINE DETAILS Machine weight: approx. 6,000 kg Control cabinet Weight: approx. 800 kg Total installed power: 24 kW Gcjdpfx Aowx Ibmob Toa Coolant system Net weight: approx. 1,300 kg Tank capacity: 630 l Hydraulic unit Net weight: approx. 2,000 kg Tank capacity: 800 l

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1961, A non-slip wire drawing machine by Niehoff is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual transmission, machine dimensions (L/W/H): approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was fully overhauled in 2019 with new gears and new bearings. In the same year, a new external lubrication oil pump was installed. Documentation available. Inspection on site is possible. Gcjdpswq R N Rjfx Ab Tja

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2005, Vertical Broaching Machine Manufacturer: Blacks Model: 1 W-CNB 34 Machine No.: S05035C Year of manufacture: 04/2005 Weight: 95kg General / Technical Data: Very well-maintained broaching machine for external broaching of notches in tensile test specimens. Broaching speeds: variable from 0.43 to 2.27 m/min Dimensions (h x w x d): 1370mm x 600mm x 450mm Power supply: 400 Volt / 50 Hz Equipment: - Variable speed adjustment via a mechanical variable speed gearbox (brand: Lenze), no electronic control! - Clamping device for tensile test specimens - 3 broaching tools (used) - Machine documentation in German and English - Machine documentation with "CE" declaration of conformity in English Godpsw Rpvzofx Ab Toca General Information The dual spindle drive ensures stable and centralized pulling as well as consistent and uniform broaching speed. The broaching machine is a purpose-built machine for cutting V- and U-notches according to Charpy and Izod standards in pre-machined 10 mm standard square specimens. The CNB-34 produces a uniform notch of higher quality than can be achieved by milling. The machine is easy to operate and features a robust design, with removable service panels for easy routine maintenance. The construction enables a convenient working height. During the cutting process, a specially designed broaching tool is drawn across the specimen. The broaching tool is pulled downward inside the machine via a gearbox and dual spindle drive. The specimen is fixed in place within the machine by means of a special clamping device. The broaching tool is moistened with cutting oil. By pressing the broaching stroke button, the notching tool is positively guided downwards along the specimen, producing an accurate notch profile. After broaching, the specimen must be removed before returning the tool. The tool is returned without the workpiece and cleaned of resulting chips; only then is the unit ready for the next operation.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tip: Hidravlična giljotina Proizvajalec: HJO, Švedska Leto: 1984 Največja debelina pločevine: 4 mm Največja dolžina pločevine: 2500 mm Gcedpfxoxgcz Io Ab Tsa Največji delovni tlak: 21,0 MPa V 3 x 380 Hz 50 Teža: 3700 kg Hitro nastavljiva reža rezila, talno nožno upravljanje.

Stanje: rabljeno, Slot length 300 mm Slot width 34 mm Slot depth mm Cutting speed 6 m/min Return speed 6 mm/min Clamping plate 380 x 300 mm Machine weight approx. 285 kg Space requirement approx. 590 x 1150 mm Gsdjd Ih Uijpfx Ab Teca Bore diameter min. - with special slotting tools: 6 mm - with slotting inserts: 20 mm - with standard slotting bar: 40 mm Electromagnetic brake With extensive accessories (see pictures)

Leto izdelave: 1991, Stanje: pripravljen za uporabo (rabljen), Keyway width range: 2mm–32mm, max. ram stroke: 300mm, strokes per minute: 300, max. installation height: 450mm, feed: 0.01mm–0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions (L/W/H): approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control system: fk electronic Dialog CNC. On-site inspection possible. Gcedpfx Aju D Aagob Tsa

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Gedpfew Ighiox Ab Tjca Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table size / working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power Supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (integrated into emergency stop circuit) - Machine enclosure below the safety door with chip guard and tool rest - Electrical sensing of the clamping jaws (tool removal control to prevent unintended retraction of the drawbridge) - Coolant swivel system with solenoid valve controlled over the swivel process (to activate coolant before broaching stroke – visual check of lubricant flow, no dry cutting!) - Electrical wiring routed in protective steel conduits - Heavy-duty control cabinet mounting for receiving machine components - Additional oil-tight drip tray on the control cabinet - 3-sided enclosed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel sheet with permanent labeling - 4 central lubrication points for trapezoidal spindle drive Remark: The machine is fully overhauled, and the machine body has been completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - The coolant system (pump, solenoid valve, and drain tap) including the coolant/lubricant swiveling system is new - The clamping jaws are new - The entire electrical system (control cabinet) is new - All metal sheets and covers are new - The following components have been overhauled and re-used: - Machine base - Machine stand - Machine table with table insert - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (new brake, new bearings) The machine is available in our warehouse and can be inspected under power. The attached pictures are original photos of the machine. The machine is marked with the “CE” label. This “CE” conforms to the state of 1998 (first overhaul).

Stanje: rabljeno, Leto izdelave: 1990, številka stroja/vozila: 3048 & 3047, Manufacturer: Karl Klink Model: RKW 25-3800-520 Weight: 50t Year of manufacture: 1990 Machine No.: 3048 & 3047 General / Technical Data: Chain Broaching Machine for Continuous External Broaching Tensile force: 25,000 kg Cutting speed: 7.2 / 8.1 / 9.6 m/min Maximum tool length: 3520 mm Pass-through width: 520 mm Tool carrier clamping surface: 3520 x 460 mm Dimensions: 12,300 x 6,400 x 4,650 mm Power supply: 380V 50Hz / 110kW Accessories / Special Equipment: - 6 tool holders for tool change - Machine documentation Remarks / General Information: Gcsdpfjinim Tex Ab Tja The machines are in good condition. The machines are disassembled and stored at our warehouse. The total system volume encompasses several trucks (approx. 70 tons per machine). The machines were used for the production of connecting rods for passenger car diesel engines. Chain broaching machines are designed for use in mass production. The continuous (non-reversing) operating process of chain broaching is engineered for maximum productivity in external broaching operations. The chain broaching process is the only broaching process without any reversal stroke of tools or workpieces. In chain broaching, the workpiece is continuously passed along the tool, thereby performing the feed movement. This unique broaching method is applied only in very high-volume serial production.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, vhodna napetost: 400 V, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of Manufacture: 2001/2023 Weight: 580 kg Overhaul: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current “CE” marking Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Gedpfx Abjw H Dgns Teca Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Equipment: - Drive with 2 speeds - Safety door with safety interlock and chip chute - Chip chute with tool tray - Electric monitoring of clamping jaws (tool removal control to prevent unintentional return of the pull bridge) - Integrated coolant system with solenoid valve (controlled via swivel system) - Patented coolant/lubricant swivel system - Externally adjustable tool length setting system (replicable across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centring plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided closed splash guard cabin with tool tray (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, with the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals have been renewed - The coolant system (pump, check valve, and drain tap), including the coolant/lubricant swivel system, is new - The coolant supply is controlled by a solenoid valve, which can be actuated via the swivel system - The pull bridge, clamping jaws, and rack segments are new - A switchable clamping jaw monitoring system has been implemented (additional safety for operator and prevention of tool breakage) - Safety door with safety interlock, signal indicator, and door lock - Tool length setting system has been relocated outside the machine enclosure - Additional end position limit switches installed - All electrical equipment (control cabinet) is new - No PLC installed, making the machine electrically maintenance-friendly - New drive motor (SEW Germany) with brake - Machine has been newly painted with 2-component structural lacquer General Information: The dual-spindle drive ensures a smooth and central pulling point as well as a constant broaching speed (optionally 3 m/min or 6 m/min). By design, the machine is quick and easy to set up for broaching with flat tools for keyway cutting. Thanks to the universally designed pull bridge and machine table, broaching with profile and flat broaching tools is possible without using additional pull heads.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 400 kg, vhodna napetost: 400 V, dolžina bročanja: 1.000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled, mechanical vertical broaching machine Rausch RS 3, with "CE" marking Pulling force: 3,000kg Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1,000mm Maximum tool length: 1,200mm Table size / working area: 430mm x 320mm / 340mm x 220mm Table opening: Ø 90mm for standard Rausch broaching mandrels Workpiece diameter: variable (removable coolant swivel system) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with stepped tool shank) Dimensions (H x W x D): 2,250mm x 800mm x 750mm (H = including 3-side safety enclosure) Motor: 2.5kW / 3.0kW Power supply: 400 Volt / 50 Hz Equipment: - Geared motor drive with 2 working speeds - Safety door with safety interlock (emergency stop circuit) - Easy-to-remove chip chute with tool rest - Tool length adjustment system adjustable from outside (Rausch system) - Protective panel for stroke adjustment and electrical switch units - Electrical sensing of clamping jaws (Tool removal control for prevention of unintentional return of pull bridge–added safety for operator & tool) - Integrated coolant system - Coolant swivel system (no electrical switch function) - 3-sided enclosed splash guard hood with wide, front-opened working area - Extra reinforced chip basket and chip screen with magnet insert - Stainless steel control panel with permanent labeling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking from manufacturer (1995) Remarks: The machine has been overhauled; the machine frame has been fully reconditioned. The following wear parts have been replaced/renewed: - New trapezoidal screws and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - Cooling system incl. coolant/lubricant swivel system is new - New 2-speed SEW geared motor - New electrics (Siemens) Gedpfxjw Huh No Ab Tjca - New safety door instead of a light barrier - New clamping jaws - All sheet metal parts, including covers, chip chute, basket, screen, and spindle guard, are new. - Stainless steel control panel with permanent labeling - Machine repainted with 2-component structural coating The machine bears the "CE" mark from the manufacturer. General Information The dual spindle drive ensures a smooth and central pulling point as well as a consistent broaching speed. The machine is primarily designed for the production of keyways up to 18mm (from 16mm keyway tools, only with stepped tool shanks). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Because of the universal construction of the pull bridge and machine table, it is possible to broach with both profile and flat broaching tools without the use of additional pull heads.

Stanje: rabljeno, Leto izdelave: 1990, maks.: vlečna sila 25.000 kg Gsdpfx Ascm Eiwsb Toca maks.: dolžina orodja 3.520 mm maks.: hitrost rezanja 9,6 m/min prehodna širina: 520 mm Stroj je obdeloval ojnice in pokrove ojnic. Stroj je zasnovan za množično proizvodnjo (izhod: 400 kosov/uro)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 480 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, hitrost vzvratne vožnje: 100 mm/s, premer obdelovanca (maks.): 800 mm, skupna višina: 1.680 mm, Manufacturer: Wiemers AG Gcedpfx Ajw D E Twsb Tsa Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical data: New vertical broaching machine, make: Wiemers SR 30 (100% compatible with Rausch RS 3) Pulling force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 430 mm x 320 mm / 340 mm x 220 mm Table aperture: Ø 90 mm for standard broach holders “Rausch system” Workpiece diameter: unlimited (removable coolant swing system) Broaching capacity / keyway width: up to 20 mm in steel (from 16 mm broaching tool width only with stepped tool shank) Dimensions (H x W x D): 1370 mm x 680 mm x 750 mm (h = table height from floor without superstructures) Motor: 2.5 kW / 3.0 kW, 2-stage, for 2 operating speeds Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 operating speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with lock, interlock check and safety monitoring - Easily removable chip chute with tool removal guard and storage option - Externally adjustable tool length system (machine-cross reproducible) - Protective cover for stroke adjustment and electrical switch units - Oil-tight storage surface on the control cabinet - Electric detection of clamping jaws (tool removal check to prevent unintentional return of pull bridge; added safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swing system with automatic coolant control via swing arm - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel operator panel with durable labeling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical pre-installation for external control element (16-pin connector) - Provision for automatic clamping jaw opening for profile broaching via roller lever - Machine documentation with "CE" declaration of conformity Optional accessories: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (W x D x H) 700 x 350 x 600 mm - External electrical control unit for broaching and return as well as emergency stop function Note: The machine is 100% compatible with all Rausch broaching machines of the RS 3, RS 4 and RS 6 series in the same performance class available on the market. All fixtures, tools or broach holders can be used without restriction. General The twin-spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm (from 16 mm slotting tools only with stepped tool shanks). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools to produce keyways. Thanks to the universally designed pull bridge and machine table, both profile and flat broaching tools can be used. Profile broaching is possible without the use of additional draw heads, using simple centering bushes. Broaching tools and holders suitable for the machine are available on request.

Stanje: rabljeno, Leto izdelave: 1986, skupna masa: 6.500 kg, moč: 42 kW (57,10 KM), vhodna napetost: 380 V, dolžina bročanja: 1.600 mm, število bročirnih položajev: 1, premer obdelovanca (maks.): 500 mm, Manufacturer: Varinelli Milano, Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500 kg Machine No.: 3269 General / Technical Data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600 mm Number of broaching stations: 1 unit Maximum clearance width between cylinders: 540 mm Cutting speed: hydraulically and infinitely variable from 1 m/min to max. 8 m/min Return speed: hydraulically and infinitely variable up to max. 18 m/min Space requirement: see machine layout diagram Power supply / connected load: 380 Volt, 50 Hz / 42 kW Accessories / Special equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is fitted with a spring-actuated locking mechanism (DIN 1417) in the pull bridge. The tool feeder system is locked hydraulically-mechanically. The machine features a coolant system with an integrated chip conveyor for installation in a pit. Remarks: The machine retains its original paintwork. It is designed for use in series production of medium and large batch sizes; for optimal operation, installation on a foundation (pit) is recommended. Pull heads and ejector needles are available upon request. The machine can be inspected at our warehouse. General information: We continually stock a wide selection of approximately 80 used broaching machines with pulling forces ranging from 3,000 kg to 63,000 kg, in both horizontal and vertical configurations. Many of the broaching machines in stock are available for demonstration. If required, we can also supply various used equipment such as pull heads, ejector needles, broaching tools, and additional specific accessories. We are a contract broaching facility by trade and, with over 50 years of experience in broaching technology, can assist you with any technical queries. Gsdpfxowqmaxo Ab Teca

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1966, skupna masa: 7.000 kg, vhodna napetost: 380 V, dolžina bročanja: 1.500 mm, število bročirnih položajev: 3, premer obdelovanca (maks.): 575 mm, skupna višina: 5.100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700kg Machine No.: 2455 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching positions Pulling force: 20,000 kg Broaching stroke: 1,500 mm Broaching positions: 3 Distance between broaching positions: 2 x 145mm Clamping diameter for broach pullers: 3 x Ø 85mm Clear width between columns: max. 580 mm Cutting speed: hydraulically continuously variable from 1 m/min up to max. 7 m/min Return speed: hydraulically continuously variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. height 5,100 mm with tool loader raised) Power supply / Connected load: 380 Volt 50 Hz / 14 kW Accessories / Special Features: The machine is equipped with a workpiece table featuring 3 bores for 3 broaching positions. The tool clamping system is designed for mechanical spring-locking in the pull bridge and loader. The machine is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimum utilization, installation in a pit (foundation) is ideally required, or alternatively, on a platform. Broach pullers and knock-out devices available on request. The machine can be inspected under power at our facility. General Information: Gcjdpfewql Rvex Ab Tsa We constantly have a large selection of around 80 used broaching machines with pulling forces ranging from 3,000 kg to 63,000 kg in both horizontal and vertical configurations in stock. A significant number of the broaching machines in stock are available for demonstration. If required, we can also offer you used equipment such as broach pullers, knock-out devices, broaching tools, and other specific accessories. We are a contract broaching operation by trade and, with over 50 years of experience in broaching technology, can assist you with any technical queries you may have.

Leto izdelave: 1965, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Godpfxstuuvze Ab Toca Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. The machine is used but in good condition relative to its age. The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability.

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: Gjdeiw Dlkopfx Ab Teca The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical Specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Gcjdpfx Aelpadyjb Toa Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Stanje: nepreverjeno (rabljeno), Forst RF 16 Broaching Machine (Internal) -WKG 1371- Technical data: Manufacturer: Forst Model: RF 16 Max. pulling force: 16 t Gcsdpfx Abjhu E N De Toa Max. stroke: 1200 mm Max. cutting speed: 5.6 m/min Max. workpiece diameter: Ø 700 mm Max. tool diameter: Ø 120 mm Workpiece mount bore: Ø 70 mm Note: Control valve is missing