Tračne brusilke nakup rabljenega (131)

Stanje: novo, Belt width: 150 mm Belt length: 2,000 mm Belt speed: 30 - 34 m/sec Total power requirement: 4 kW Machine weight: approx. 100 kg Hjdeirwwpjpfx Ab Tjfr Space requirement: approx. 1.2 x 0.5 x 0.85 m

Stanje: dober (rabljeno), Complete belt grinding installation, consisting of: Hedpfxoxw Nq Ds Ab Tofr GRIT GX 75-2H (2-speed belt grinder) GRIT GXC feed unit (centreless tube grinder) GRIT GXW cooling/lubrication module (for wet grinding) Suitable for tube working, cylindrical grinding, deburring, edge breaking, surface finishing, and material preparation of steel and stainless steel. How does it work? The material (tube or rod) is placed in the GXC feed unit, which automatically and evenly feeds the workpiece along the grinding belt of the GX 75-2H. For intensive operations, the GXW cooling module supplies coolant to reduce heat and achieve a superior surface finish. This system functions as a centreless tube grinder, ideal for processing long tubes and serial production. Technical specifications GRIT GX 75-2H Belt Grinder - 2 belt speeds: 15 m/s and 30 m/s - Power output: 1.5 / 2.0 kW - Belt size: 75 × 2000 mm - Spindle speed: 1500 / 3000 rpm GRIT GXC Feed Unit (Centreless Module) - Feed rate: stepless 0 – 2 m/min - Workpiece diameter: Ø 10 – 100 mm - Drive: 0.18 kW motor GRIT GXW Cooling Module - Pump power: 0.06 kW - Tank volume: approx. 20 litres Complete installation - Total weight: approx. 160 kg - Required floor space: ± 120 × 60 × 120 cm - Including 2 abrasive belts (see photos)

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 150 mm, višina brušenja: 100 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, GREIF 7-station through-feed flat grinding machine, wet grinding, suitable for square tubes and flat materials, equipped with 7 belt grinding stations, each with 4 kW power. Each station features frequency control, and all stations can be swivelled by ±15° for cross-grinding. Maximum grinding width: 150 mm; maximum grinding height: 100 mm. Contact wheel diameter: 200 mm. Grinding belt dimensions: 150 x 2500 mm. Features pneumatic belt tensioning and belt oscillation. Machine is supplied including return conveyor and paper belt filtration unit with a 1,500-litre capacity. Since the contact wheels are directly driven, this machine can also be used for polishing or brushing operations. On request, the machine can be offered fully refurbished. Hodpfstq Twvex Ab Tefr

Stanje: novo, Special offer price for in-stock items! Only while supplies last! Price ex stock, plus VAT. Belt Grinders: Bernardo Type/Model: MS 150 x 2000 S-2 Condition: New Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel Ø x W: 200 / 155 mm Surface grinding table: 460 x 150 mm Suction connection Ø: 100 mm Hfsdeb Hhh Dspfx Ab Tor Motor output S1 100%: 2.1 / 2.8 kW Motor input S6 40%: 2.8 / 3.6 kW Voltage: 400 V Length: 1080 mm Width: 520 mm Height: 1000 mm Weight approx.: 85 kg Features: - Standard with 2 speeds, optimal for grinding stainless steel - Universal application for grinding edges, surfaces and for cylindrical grinding - Graphite coating on the surface grinding area enhances belt gliding properties - Consistent belt tension via spring-loaded tension device - User-friendly belt change, quick and simple - High grinding performance due to high belt speed - Quick adjustment for horizontal and inclined positions - Versatile use for workshop and industrial applications - Large dimensioned surface grinding area with safety cover - Includes fine adjustment for parallel belt tracking Scope of delivery: - K 80 sanding belt - Foldable protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Motor protection switch - Rubber-coated grinding roller - Graphite coating - Separate emergency stop - Base frame Promotional price ex stock Mindelheim, loaded free of charge. Art. 05-1249

Stanje: novo, WBG75 - ROGI belt grinder 400V - 3 Phase Sanding belt ----- 75 x 2000 mm Belt speed ----- 33 m/s Motor ----- 3 kW Weight ----- 115 kg INCLUDES * Sturdy base cabinet * Sanding belt Hedpjga T Aysfx Ab Tsfr

Stanje: rabljeno, Band width 100 mm Belt length 920 mm Motor power 0.35 kW Belt speed 7 m/sec Sanding table dimensions 300 x 150 mm Roller diameter 58 mm Dimensions 460 x 400 x 210 mm Hodpjhrz Ewefx Ab Tefr Operating voltage 380 V Machine weight approx. 15 kg Equipment: - Bench model - 1 sanding belt - Sanding table made of steel with planed surface - Belt tracking adjustment via two threaded rods with star grips

Stanje: novo, Leto izdelave: 2025, The CORMAK SM150D belt grinder is an industrial machine designed for intensive use in manufacturing plants, metalworking shops, and tool rooms. This belt grinder for metal combines high grinding efficiency with an integrated dust extraction system, ensuring safety, cleanliness, and comfort during daily operation. Its robust steel construction and large worktable ensure stability and precision, even when processing large workpieces. Hjdpoxrzgtsfx Ab Tefr Key machine features: - Two belt speeds (14.5 / 29 m/s) – Allowing speed adjustment to suit the material type and working requirements (for coarse or finishing grinding). - Integrated dust extraction system – Provides a clean and safe working environment without the need for external extraction units. - Stable steel frame – Effectively reduces vibrations, which improves repeatability and processing quality. - Large worktable (480 × 150 mm) – Enables comfortable handling of larger components. - Stepless grinding angle adjustment – Enables precise alignment of the belt to the workpiece. - Quick-change belt system – Reduces downtime and enhances work efficiency. Design and technology: The stationary CORMAK SM150D grinder is based on a welded steel frame, ensuring rigidity and resistance to dynamic loads. The built-in extraction system guarantees high efficiency in removal of dust and grinding residues. The 2.8 kW motor delivers sufficient power for the most demanding machining tasks. Precision and operational efficiency: By utilizing a belt 150 mm wide and 2000 mm long, the unit offers a large contact area, which shortens processing time and increases efficiency. Two operating speeds allow for quick transitions between aggressive material removal and precise surface finishing. The ergonomic design and spring-loaded belt tensioning system maintain proper tension throughout the entire operation cycle. Applications: The CORMAK SM150D metal belt grinder is suitable for use in: - Production facilities machining steel, stainless steel, and aluminum - Welding and locksmith workshops - Surface preparation and finishing departments - Grinding of edges, welds, and flat surfaces Standard equipment: - Stable steel base with tilt adjustment - 2000 × 150 mm abrasive belt - Built-in extraction system with bag and Ø100 mm connections - Spark and dust protection covers - Adjustable protective guard Technical data: Abrasive belt dimensions (L × W): 2000 × 150 mm Belt speed: 14.5 / 29 m/s Motor speed: 1400 / 2800 rpm Motor power: 2.8 kW Dimensions (L × W × H): 700 × 540 × 1130 mm Weight: 90 kg Power supply: 400 V Extraction port diameter: 2 × Ø100 mm Worktable dimensions: 480 × 150 mm Chip bag diameter: Ø 100 mm Chip bag length: 500 mm

Stanje: novo, Širina traku 50,0 mm Dolžina traku 940 mm Hitrost traku 3,0 - 22 m/min Število obratov 1450 obr/min Premer cevi 16,0 - 114 mm Radij 180° Skupna priključna moč 4,75 kW Teža stroja ca. 265 kg Dimenzije D-Š-V 1000 x 750 x 1300 mm Oprema: - Elektromotorni / stacionarni tračni brusilnik za cevi - Avtomatsko podajanje materiala z ločenim pogonskim motorjem - Rezervni brusni trakovi - Brezstopenjsko nastavljanje hitrosti - Ročna nastavitev napetosti cevi - Poliranje ukrivljenih cevi do 180° (kot) - Možno ročno delo brez podajanja Hsdpjxaaxqefx Ab Tjfr - CE oznaka / Izjava o skladnosti

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Zaradi PREKLICA PROJEKTA gradnje jedrske elektrarne vam lahko ponudimo... Hedpfevlimljx Ab Tsfr ŠE NIKOLI UPORABLJENO – popolno tovarno za oblikovanje / obdelavo kovin (približno 80 strojev). Za celoten seznam strojev in dodatne fotografije nas prosimo kontaktirajte. Hvala!

Stanje: novo, Special deal for stock items! Only while supplies last! Price ex stock, plus VAT. Belt Grinder: Bernardo Type/Model: MS 75 x 2000 S-2 Condition: New Belt dimensions: 75 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel Ø x W: 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction port Ø: 100 mm Motor output S1 100%: 2.4 / 3.0 kW Motor input S6 40%: 3.0 / 4.0 kW Voltage: 400 V Dimensions (L x W x H): 1080 x 440 x 1000 mm Hjdpfxjb Hhkgo Ab Tsfr Weight approx.: 67 kg Factory-sealed new item.

Stanje: novo, WBG150 - ROGI Belt Sander 400V - 3 Phase Hedpfx Aboga T Iho Tofr Sanding belt ----- 150 x 2000 mm Belt speed ----- 33 m/s Motor ----- 4 kW Weight ----- 135 kg INCLUDES * Heavy-duty base cabinet * Sanding belt

Stanje: novo, Leto izdelave: 2021, Long Belt Grinding Machine LMD2500 incl. Deburring Tool – NEW – Delivery time on request The LMD 2500 is a long belt grinding machine equipped with a flexible abrasive belt that enables the processing of both flat surfaces and edges or corners of materials. This machine is ideal for working on irregular shapes, removing weld seams, and for deburring and rounding of laser-cut parts. The flexible, motor-adjustable height table is especially suitable when the workpiece to be processed cannot be easily moved due to its large dimensions. With the LMD2500, you benefit from the versatility of the long belt together with a variety of grinding tools such as the grinding shoe, manual pad, and deburring brush or disc to process the required areas. - Grinding of flat surfaces with the contact roller - Grain-finishing with flat pad - Weld seam grinding - Deburring of laser-cut parts - Processing of large surfaces - Interchangeable finishing tools - Flexible deburring/edge-rounding station - Pneumatic belt tensioning - Tool holder with counterweight system - Contact roller tool Hfodpfx Abjg I Ipkj Tsr - Flat tool - Manual pad 100*80mm - Grinding belt, variable speed (8-25m/s) - Edge rounding tool - Including: o Deburring disc holder Ø150mm, medium SH hardness o Sanding discs Ø150mm, grit 120 ceramic with hook-and-loop backing x5 o Surface finishing disc Ø150mm with hook-and-loop backing o Edge rounding brush Ø150mm, fine aluminum oxide o High-adhesion rubber mat (1000x600mm) for small parts o Brush speed 600-1700 rpm o Grinding belt 7800x120 mm

Stanje: rabljeno, Leto izdelave: 1950, Bandwidth: 150 mm Band length: 6680 mm Voltage: 380 V Weight: 800 kg Space requirement: approx. 3.2 x 1.6 x 1.75 m Wood surface sanding machine Sliding carriage length / Table size: 2500 x 800 mm Hsdpfxjua Ivco Ab Tefr Sanding belt dimensions: 150 x 6680 mm Manual feed table, movable Table height adjustable

Stanje: pripravljen za uporabo (rabljen), Bezosna brusilnica za cevi - tračna brusilnica - bezosna brusilnica za cevi - valjčna brusilnica Bezosna naprava za brušenje/poliranje cevi za elemente z minimalno dolžino 1.100 mm. Stroj se lahko uporablja tako za mokro brušenje kot za poliranje. Hjdpfx Abexmilte Tofr Stroj lahko obdeluje cevi s premerom od 10 mm do 160 mm.

Stanje: kot nova (razstavni stroj), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW, 400V/50Hz Weight: 110 kg Hsdpfx Aspgmufsb Tefr Technical data and dimensions: Subject to change/errors excepted

Stanje: novo, Special promotion price for stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt Grinder: Bernardo Type/Model: MS 75 x 2000 S Condition: New Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact wheel Ø x width: 200 / 80 mm Flat grinding table: 460 x 75 mm Extraction port: 100 mm Hjdpfx Abjfnr Aio Tefr Motor output (S1 100%): 3.0 kW Motor input power (S6 40%): 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Features: - High grinding performance thanks to high belt speed - Quick adjustment for horizontal and inclined positions - Continuous flat grinding surface for optimal processing of long workpieces - Constant belt tension via spring-loaded tensioning device - Versatile use for grinding edges, surfaces, and for cylindrical grinding - Quick-release system included for fast belt changes - Easy adjustment of parallel belt tracking via adjustment screw - Graphite coating on the flat grinding surface improves the sliding properties of the sanding belt Scope of delivery: - Abrasive belt K 80 - Flip-up protective shield - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate emergency stop button - Base frame

Stanje: rabljeno, Leto izdelave: 2025, Univerzalni mobilni tračni brus dizajniran je za brušenje/poliranje elemenata čiji transport može biti nemoguć zbog dimenzija ili mase. Opis stroja Izuzetna stabilnost uređaja. Podesivi graničnik dubine Jednostavno i praktično korištenje Namijenjen brušenju/poliranju elemenata koji su teški za transport zbog veličine Visoka učinkovitost kod brušenja ili poliranja zavara uz pod Tehničke specifikacije Motor (kW): 2,8 Kontaktni kotač (mm): 195x150 Vođeni valjak (mm): 195x150 Ravno brušenje (mm): 150x450 Dimenzije trake (mm): 2000x150 Brzina trake: 15/30 m/s Hfedpfx Aboxpvknj Tjr Radna visina (mm): 475-1240 Težina (kg): 85 Pakiranje (cm): 750x1100x800 NAPOMENA!!! STROJ JE VRAĆEN, KOMPLETAN. NEDOSTAJE ORIGINALNO PAKIRANJE. NEMA JAMSTVA.

Stanje: novo, The FG170 grinding and polishing machine for square tubes and flat profiles stands out due to its robust construction, making it suitable for intensive working conditions. This machine processes workpieces up to 170 mm in width by combining multiple abrasive belt heads with brush units. The FG170 Z is equipped with one abrasive belt head (Z). The FG170 ZK combines an abrasive belt head (Z) with a brush unit (K). Possible configurations include: FG170 2Z = 2 abrasive belt heads, or FG170 2ZK = 2 abrasive belt heads + 1 brush head Other configurations can be selected according to customer requirements. Abrasive Belt Head: Used for processing the surface during the grinding process of square tubes and flat profile elements – removes severe defects and burrs. Brush Head: Final finishing after grinding – provides the surface with a smooth and uniform finish. The FG170 guarantees high and consistent quality when processing stainless steel square tubes and flat profiles, tube by tube. Abrasive Belt Change: Abrasive belt change in a few seconds, tool-free. Fixed Working Height: FG machines offer a fixed working height. Adjustment for different material thicknesses is made via the vertical movement of the processing stations, so there is no need to modify the roller table at the infeed. Technical Specifications – FG170: Hfjdpfjd Ix Ntox Ab Tsr Working capacity (Ø mm): 170x200 Number of belt stations (Z): 1-3 Number of brush stations (K): 0-2 Abrasive belt dimensions (mm): 170x2000 Brush band dimensions (mm): 170xØ200 Abrasive belt speed (m/s): 20 Brush band speed (m/s): 15 Feed speed (m/s): 6+12 Abrasive belt motor per head (kW): 4 Brush motor per head (kW): 3 Feed motor (kW): 0.45 Total power (kW): 8.5 (ZK) Power consumption (A): 18 (ZK) Dust extraction connection per head (Ø mm): 80 Dimensions (mm): 1500x1000x1900 (ZK) Weight (kg): 740 (ZK)

Stanje: novo, Bandwidth 100 mm Belt length 2000 mm Belt speed 15/30 m/s Total power requirement 3.0 kW Machine weight approx. 159 kg Space required approx. 768 x 1185 x 1417 mm Combined tube, profile, and belt grinding machine The unique and universal free-standing belt grinder PASOVEC 100 Multi-Function is an invaluable asset wherever constructions are made from tubes and various profiles. The PASOVEC 100 Multi-Function features three workstations: At the rear of the machine, there is a station for standard contact grinding; at the top, a station for surface grinding; and finally, at the front of the machine, an integrated clamping device for tube profiles. This setup allows for precise and clean processing of square tubes, round tubes, and flat steel. Grinding angles are adjustable from 30° to 90° and from 0° to 60°. The machine comes standard with integrated ductwork for extraction connection. Technical Data: - Adjustable grinding angles: 30° to 90° (0° to 60°) Hfodpjt Hyqgjfx Ab Tor - Number of speeds: 2-speed - Nominal diameter of extraction nozzle external: 74 mm - Nominal diameter of extraction nozzle internal: 70 mm Included in the price: 1 pc. Table-top belt grinder PASOVEC 100 MULTI-FUNCTION 1 pc. Abrasive belt 100 x 2000 mm grit 36 1 pc. Grinding roller Ø 42.4

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Surface grinding device on the left, roller diameter: 100 mm Sanding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180 / 10 x 250 mm Contact grinding wheel on the right, 200 mm diameter, sanding belt dimensions: 50 x 2000 mm 2 spindle speeds via pole-changing motor: 11,450 / 2,900 rpm Drive motor: 380 V, 0.9 / 1.3 kW Space requirement: 1,000 x 400 x 1,800 mm Hfedpfxswvt I Hj Ab Ter Weight: 140 kg

Stanje: kot nova (razstavni stroj), A demonstration belt grinding machine WIEGAND Belt dimensions: 2000 x 75 mm Belt speed: 18 / 37 m/sec Power: 2.2 / 2.8 kW 400V/50Hz Weight: 90 kg Hsdpfspgmtzsx Ab Tefr Technical data and dimensions: subject to change For further technical data, please refer to the PDF document.

Stanje: dober (rabljeno), Leto izdelave: 1999, • Year of manufacture: 1999 • 400 V; 50 Hz • 1.5 kW • Abrasive belt: 100 x 1500 mm Hfodeba Hz Uspfx Ab Ter • Belt speed: 25 m/sec • Required space (W x D x H): 800 x 55 x 110 cm • Weight: approx. 50 kg

Stanje: novo, Belt width: 75 mm Hfodpfok Uqg Sex Ab Tsr Belt length: 2000 mm Belt speed: 30 m/s Total power requirement: 3.0 kW Machine weight: approx. 70 kg Required space: approx. 610 x 944 x 1419 mm Mobile Belt Grinder PASOVEC 75 RUNNER Pasovec 75 RUNNER – the specialized belt grinder developed for flat grinding applications, particularly for grinding weld seams on material surfaces. The Pasovec 75 Runner removes unwanted layers created during sheet metal rolling or after cutting sheets with plasma or oxy-fuel. Innovative, multi-functional machine Infinitely variable depth adjustment Equipped with a dead man’s switch Station for flat grinding of small workpieces Low operating costs

Stanje: rabljeno, Contact grinding wheel dimensions: 50 x 100 Ø mm Hjdpsb Tcv Hofx Ab Tofr Drive motor: 380 V, 0.7 kW Space requirement: 650 x 550 x 1050 mm

Stanje: novo, The ML100 tube grinding machine is the ideal choice for surface grinding and polishing of round, oval, and elliptical tubes—including both straight and bent tube profiles. Depending on configuration, the machine is available from EUR 9,900. The ML100’s planetary belt system enables belt grinding without tube rotation, delivering outstanding surface results. The infeed system feeds straight tubes safely into the grinding station, ensuring consistent and productive surface finish quality. Hfedpfjd Hfnbox Ab Tor Minimal vibration on long tubes: With the ML planetary belt system, the tube itself does not rotate. Instead, the abrasive belts orbit around the tube while it remains stationary and moves straight through the machine. Polishing of straight or bent tubes: The ML100 is engineered for finishing straight tubes (automatically) or bent tubes (manually). Quick adjustment: The automatic infeed can be easily detached via hinges, allowing for processing of bent tubes. Reduced heat generation: Unlike conventional systems, the planetary belt system significantly reduces frictional heat on the tube’s surface. Oval tubes: The ML100 safely processes the surfaces of oval or elliptical tubes. Maximum abrasive belt adaptability to holes or gaps in the tube. Technical data – ML100: Working capacity (Ø mm): 10 – 114 Number of stations: 1 Abrasive belt dimensions (mm): (2x) 50x940 Abrasive belt speed (m/s): 3–22 Feed speed (m/s): 1–5 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 5 Current consumption (A): 11 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Weight (kg): 250