Tračni brusilnik

Löser

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. Hsdpfsd Ixadjx Af Tefb The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. Hfjdpetmqi Djfx Af Tsb A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 150 mm, višina brušenja: 100 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, GREIF 7-station through-feed flat grinding machine, wet grinding, suitable for square tubes and flat materials, equipped with 7 belt grinding stations, each with 4 kW power. Each station features frequency control, and all stations can be swivelled by ±15° for cross-grinding. Maximum grinding width: 150 mm; maximum grinding height: 100 mm. Contact wheel diameter: 200 mm. Grinding belt dimensions: 150 x 2500 mm. Features pneumatic belt tensioning and belt oscillation. Machine is supplied including return conveyor and paper belt filtration unit with a 1,500-litre capacity. Hedpstq Twvjfx Af Tsfb Since the contact wheels are directly driven, this machine can also be used for polishing or brushing operations. On request, the machine can be offered fully refurbished.