Naprave za ogrevanje in hlajenje nakup rabljenega (157)

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), The temperature control unit is for sale; in 2015, the original price was €4,995. Medium: Water Features: - Self-optimizing temperature control function - Function and fault indication displays - User-dependent, password-protected access rights - Limit comparator (tolerance band monitoring of actual value with alarm notification) - Adjustable setpoint limitation - Weekly timer - Automatic heating and cooling program - Freely selectable ramp function for temperature changes during heating and cooling - VNC server via Ethernet (enables complete operation and management from a PC) - Second temperature setpoint - Tool management (setpoints and control parameters can be saved as recipes) - Data acquisition for quality assurance (actual values can be exported with timestamp to an SD card) Dujdjm Dtm Ajpfx Altsw - Electronic level monitoring with dry-run protection - Automatic filling and refilling with leakage and level function monitoring - Automatic deaeration Monitoring/Safety: - Short-circuit proof controllers and control outputs - Temperature sensors in the circulation medium flow and return - Safety temperature limiter against overheating and safety valves for overpressure - Contactless heating control with solid-state relays - Safety temperature reduction when switching off - Audible and visual warning signals with symbols and text on the touch screen - Symmetrical mains load with three-phase drive and three-phase heating rods - Triple safety shutdown of the heater - Resettable circuit breakers and motor protection switches - Dirt filter in the cooling water supply Hydraulics: - Continuous cooling via motor valve

Stanje: rabljeno, Hladilna enota, povratni vodni hladilnik, vodni hladilnik, chiller O. Hellwig Leto izdelave: cca 1995 Hladilna zmogljivost: cca 8 kW Nazivna moč hladilne enote: 3 kW Dsdspu R Ncspfx Altjuw Hladilno sredstvo: R422D Prostornina vodnega rezervoarja: cca 35 litrov Pretok obtočne črpalke: 40 litrov/min Moč črpalke: 0,63 kW Vodna priključka: 1/2 palca Priključek na omrežje: 380 voltov, 50 Hz - Nastavitev temperature preko vrtljivega potenciometra Dimenzije (D x Š x V): 1100 x 750 x 140 mm Teža: 285 kg

Stanje: skoraj kot novo (rabljeno), Fiege 8-kanalni regulator vročega kanala s povezovalnim kablom in Harting priključkom. Dedpeyr Eitefx Alteuw

Leto izdelave: 2011, obratovalne ure: 34.000 h, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Na prodaj je dvojni temperaturni regulator podjetja Single, takratna nabavna cena je bila približno 5.100 €. Medij: voda Ojačana črpalka Grelnik: 9 kW na napravo Hladilna moč: 20 kW na napravo Premično (na kolesih) Duedjzbx Rpjpfx Altsw Vmesnik: 20 mA Senzor PT 100 Merjenje pretoka Alarm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 04217, Na prodaj je zanesljiv in robusten temperaturni regulator Regloplas, model 90S. Rabljeno, z znaki uporabe, značilnimi za starost na ohišju. Na voljo 3 kosi. Tehnični podatki Tip: 90S / 6 / TS22 / 1K / RT45 Maks. temperatura: 90 °C Grevalna moč / priključna moč: 7,1 kW Napetost: 400 V / 3 PE (trifazno) Frekvenca: 50 Hz Dusdsy E Hzrepfx Altsw Tok: 11 A Prostornina polnjenja: 3 l Številka načrta: 04217

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Tip: TT-108’000 Leto: 2025 Delovne ure: 0 h (Stroj je popolnoma nov) Prodaja se zaradi napačnega nakupa. Duodpfx Ajzhpdloltow Pripravljen za takojšnjo dostavo.

Leto izdelave: 2014, obratovalne ure: 150 h, stanje: kot nova (razstavni stroj), Temperirna naprava podjetja GWK je naprodaj, uporabljena je bila le na sejmih... Z veseljem vam lahko pošljem opis naprave! Sredstvo: voda / 30% glikol Grejna moč: 9 kW Obratovalna temperatura: maks. 160°C Hladilna moč: 40 kW Hlajenje: toplotni izmenjevalnik Djdpfx Ajza U Dceltjuw Mobilna (na kolesih)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Premer obdelovanca: 1 – 18 mm Rezalne plošče do: 100 x 1 mm Luknja: 20 mm Dsdpfxey Rugas Altouw

Stanje: novo, *Technical Standard Specification: Device type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return line of circulation and cooling water inlet - Reversing circuit for leak-stop operation (operable up to system shut-off temperature) - Ball valves in supply and return - Automatic temperature-dependent system shut-off - Fill duration monitoring and aqua timer - Adjustable pump run-on - Adjustable temperature alarm - Options: interface cable - Control unit SBCmini with relay for collective alarm, 230V, at the rear of the controller on terminal - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater on heating contactor - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Flow rate (max) 27 l/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Dodpfx Ajfnvwqjltsuw Design: submersible pump / peripheral impeller *Dimensions / Weights / Colours Dimensions (L/W/H): 600 mm x 240 mm x 493 mm (excl. connections) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey, Front door: RAL 5015 sky blue *Connections: Circulation medium: socket G1/2" Cooling water: socket G3/8" *This device is compliant with European directives. Other guidelines and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) -Heating control via solid-state relay -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. Dujdpfx Asg Ey Rfjltjw *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation. Duedpjftm Hrsfx Altew

Stanje: novo, *Technical Standard Specification:* Device type: 6/95 Heating capacity: 6 kW Cooling capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Features:* - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return line of circulation and cooling water inlet - Reversal circuit for leak-stop operation - Manual tool draining via leak-stop operation and activation of a vent valve on the rear of the unit - Filling time monitoring and aqua timer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meters *Electrical Features:* - Control unit SBCmini, with relay for collective alarm, 230V, connection on the rear of the controller - Heating control SSR - Control cabinet IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A *General Features:* - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heating element made of Incolloy - Device mounted on castors, two of which are pivoting with brake - Additional temperature safety for secure shutdown of the heater on heater circuit breaker *Cooling:* Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: socket G3/8" internal thread (Performance data based on 80°C supply and 15°C cooling water temperature, as well as a pressure difference between cooling water inlet and outlet of 3 bar) *Pump:* Type: T401 Flow rate (max): 40 l/min Flow pressure (max): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions/Weights/Colors:* Dimensions L/W/H: 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections:* Dusdpfjfnvviex Altjw Circulating medium: socket G1/2" Cooling water: socket G3/8" Filling (option) *This device is compliant with European directives. Other directives and standards are only considered fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are indicated in offers or order confirmations.*

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dujdpfog Ey Ufjx Altsw Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) Duedjg Ey T Ejpfx Altew - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Temperirna naprava teco th 140 podjetja GWK z indirektnim hlajenjem je na prodaj; na zahtevo vam lahko posredujem številne zmogljivostne podatke, ki so na voljo. Priložene so tudi cevne povezave. Napravo bo pred dobavo preverilo podjetje GWK, stroški pregleda so že vključeni v prodajno ceno. Medij: Termo-olje, Marlotherm SH Ogrevalna moč: 27 kW pri maks. 350 °C Dedpjx Dcd Rjfx Altjuw Hladilna moč, indirektno: 110 kW Črpalka: 150 l/min pri maks. 7 bar Hlajenje v obtoku preko 3-potnega motornega regulatorja Zaporni ventil na UV in UR Možnost priklopa za PT 100 tipalo Notranja kapljična posoda Dolžina: 1320 mm, širina: 570 mm, višina: 1720 mm, teža: 410 kg

Leto izdelave: 2019, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Naprave izvirajo iz orodjarne, zato so bile zelo malo v uporabi. Stroj ENGEL ima le 6.520 delovnih ur. Temperirne naprave so bile uporabljene v istem obsegu in imajo največ približno 7.500 delovnih ur. Cena: 3.450 € na kos. Na voljo sta še 2 kosa. Ob nakupu obeh naprav prejmete izvedbo z veliko črpalko – z maksimalno močjo pri hlajenju, gretju in pretoku – za samo 6.500 €. Dodpsxk Txxsfx Altsuw

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, PSG krmilnik vročih kanalov 8 faz V zelo dobrem stanju Vključen je 24-pinski kabel Dusdpfx Aeza H Eljltjw

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, skupna masa: 50 kg, vrsta vhodnega toka: trifazni, moč: 12 kW (16,32 KM), leto zadnje generalne obnove: 2026, Tip: TP-DIRECT: 120 Moč: 12 kW Maksimalna delovna temperatura: 120 °C Medij: voda Tlačna temperirna naprava Duodpfx Aloy Uvwbstow Na voljo so trije kosi Cena: 700 EUR na kos

Stanje: zelo dobro (rabljeno), Točkovne varilne klešče Dalex Dedpfxjy Inwgo Alteuw Tip 3011/2 Doseg 250 mm Nazivna moč 2,4 KVA 380 Voltov

Stanje: rabljeno, Proizvajalec: TOOL TEMP Dujdpfx Asylaatsltsw Tip: TT 157

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Proizvajalec: Wittmann Tip: TP-PLUS -2:90 Duodpfx Aleyk Uwkjtjw

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Proizvajalec: Wittmann Dusdpfx Aoyk Uvmsltow Tip: TP-PLUS -2:90

Leto izdelave: 2004, stanje: Okvarjen nosilec rezervnih delov (rabljen), Proizvajalec: Wittmann Tip: TP-PLUS-2:90 Dusdpjyk Tnnsfx Altjw Nepopolno

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Proizvajalec: Wittmann Djdoyk Tmqspfx Altjuw Tip: TP-PLUS -2:90

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Proizvajalec: Wittmann Dsdoyk Tfyjpfx Altouw Tip: TP-PLUS -2:90