Obdelovalne linije za les nakup rabljenega (48)

Stanje: dober (rabljeno), Leto izdelave: 1994, Stroji za utore za brunarice s potiskačem Tiger stop dolžine 10 metrov, opremljen z: 1 horizontalno rezkalno skupino zgoraj, 1 horizontalno rezkalno skupino spodaj, 1 sprednjo/zadnjo rezkalno skupino, 1 horizontalno vrtalno skupino premera 16 mm, 1 avtomatski mehanski omejevalnik Tiger stop dolžine 10 metrov, letnik: 2001, uporabna delovna dolžina: 9,20 m. Iodpfoxbn N Tsx Ah Djbc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, obratovalne ure: 0 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 00000000001, Approx. 18m long Already dismantled On-site loading possible Fully functional Iedovrv Trepfx Ah Djbc

Leto izdelave: 2009, Stanje: pripravljen za uporabo (rabljen), LAMINATING MACHINE FOR DOORS IPS MODEL PC-2500-SCBP Machine designed for the application of protective adhesive film on flat surfaces. Equipped with motorized feed with rollers and automatic cutting system. Suitable for fixed-height line/table operation approx. 900 mm. Year 2009. Simultaneous top and bottom lamination. Ibodpfxshkr Ane Ah Dsc TECHNICAL SPECIFICATIONS - MINIMUM / MAXIMUM WORKPIECE THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2,400 MM - INFEED ROLLER HEIGHT FROM FLOOR (ADJUSTABLE) 840 / 950 MM - TOTAL MACHINE POWER CONSUMPTION 3 KW - MINIMUM REQUIRED AIR PRESSURE 6 BAR - ELECTRICAL INSTALLATION VOLTAGE 220 V - 380 V

Stanje: dober (rabljeno), Leto izdelave: 2011, Fully automatic wood infeed with feed roller conveyor Extension for cross conveyor and infeed roller conveyor for timber lengths up to 13 m Cross conveyor for loading and feeding Ibsdowuppwopfx Ah Dec Under-table swing crosscut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse groove milling machine Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning system "two-hand operation" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm timber tray Safety devices and perimeter guarding

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Krüsimatic G2 Joinery Center – Used, Fully Refurbished Condition & Refurbishment The machine has been completely overhauled by Krüsi Maschinenbau AG. It receives a new control system, regulators, servo motors, and wiring – including a 12-month warranty on mechanics and new components. Technical Data • Maximum timber passage: 200 x 320 mm • Infeed length: 10,000 mm • Outfeed length: 10,000 mm • Supply voltage: 3 x 400 V / 50 Hz Iodpfx Ahewb Ev Ho Djbc • Protection: 3 x 63 A (site-provided) • Pneumatic pressure: ≥ 8 bar • Air consumption: 10–15 m³/h • Machine control: IST Software / Abb3d • Interface: BTL compatible Processing Units Gantry 1: • 5-axis saw unit (angle-limited) • 4-axis milling unit with 5-position spindle head (horizontal) + marker • 4-axis notching unit with 2-position spindle head (vertical) • Drilling unit with two horizontal tool holders • Chain mortising unit Gantry 2: • Two chalet milling motors (vertical) • Two chalet milling motors (horizontal) • Two drilling units (horizontal) • Grooving unit (horizontal & vertical) Accessories • Comprehensive tool package included • Two compressed air tanks for gantry weight compensation The ideal opportunity for carpentry shops, timber construction companies, and joinery centers relying on reliability and precision – with a factory warranty.

Leto izdelave: 1997, Stanje: rabljeno,

Stanje: novo, Briquette diameter: 60 mm Tank diameter: 100 mm Capacity: 15/70 kg/h Maximum briquette length: 60 mm Number of cycles: 7 cycles/min Number of cylinders: 3 Power supply: 40 V, 50 Hz Motor power: 5.5 kW Overall dimensions Ibododz Dmgopfx Ah Djc Length: 1700 mm Depth: 1170 mm Height: 1510 mm Weight: 650 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, For sale: 4 Weinmann butterfly tables, each measuring 10.5 meters in length and 3.2 meters in width. Weinmann multifunction bridge WMS150 equipped with 3 tool holders, a saw, and a milling unit. Iodjw D Upuopfx Ah Debc

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Koka baļķu orientētājs ar apakšējo griezēju. Pēc remonta. Ibsdswx I D Uepfx Ah Dsc

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WBZ 160, WEM 100, WMS 120, WTW150..., Complete WEINMANN system for the production of prefabricated timber-frame houses For sale is a WEINMANN system, which is currently partially dismantled. The system was manufactured in 2010. Price: On request Dismantling, transport, and reassembly including commissioning can be offered upon request. Overview table: 1 Beam processing center WBZ 160/12 2 Stud station WEM 100/10 3 Multifunction bridge WMS 120 4 Assembly table WTW150/12 (infeed table) 5 Assembly table WTW150/12 R (receiving table) 6 Assembly table WTW150/12 R (receiving table) 7 Distribution table WTW100/12 8 Control panel WTZ 100/12 9 Assembly table WTZ100/12N Ibjdowk Rbgjpfx Ah Djc 10 Assembly table WTZ100/12 11 Assembly table WTZ100/12N 12 Assembly table WTZ100/12 13 Console crane WHM 100/12DK / Schmalz, 2 units

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21.792, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vhodni tok: 44 A, Heavier construction of the ZA 800S carpentry joinery machine, sliding table with linear ball bearing guides Ibodpfewf Ivkjx Ah Dsc crosscut saw swivels up to 60° on both sides Swiveling rip saw up to max. 45° Top and bottom mounted trim saw, swivels up to max. 45° on both sides Maximum workpiece thickness: 315 mm Maximum slotting depth: 240 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Schmidler CNC Timber Processing Line - Model: SAB 4 R - Year of manufacture: 2000 Iedpfx Aoulvldsh Dobc - DOS-based software, production files in BTL format - Processing length: 30 meters - Includes an additional spare saw - Video available The line is 100% OPERATIONAL

Stanje: novo, Briquette diameter: 55 mm Tank diameter: 750 mm Output: 15–60 kg/h Maximum briquette length: 50 mm Cycle rate: 7 cycles/min Number of cylinders: 3 Power supply: 400 V, 50 Hz Motor power: 4 kW Overall dimensions Length: 1500 mm Depth: 900 mm Height: 1065 mm Ibodpfx Aegbpi Esh Doc Weight: 450 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja višina reza: 140 mm, največja širina rezanja: 350 mm, premer žaginega lista: 350 mm, skupna masa: 3.200 kg, The machine is in very good technical condition, ready for operation. It runs very quietly. TECHNICAL SPECIFICATIONS: - Track width: 350 mm - Shaft width: 640 mm - Max. blade diameter: 350 mm - Blade bore diameter: 70 mm - Max. cutting height: 140 mm From above: - Pawls - Smooth metal idler roller - Pawls - Smooth metal idler roller - Shaft with saw blades + insert for short elements - 2 smooth metal idler rollers From below: - Guide bar - Pawls - Track - Central lubrication - Extraction stub diameter: 200 mm - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 35 kW Machine dimensions: - Length: 2000 mm - Width: 1550 mm - Height: 1550 mm - Weight: 3200 kg We invite you to test the machine on site. Where can you see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE You can test the machine on site. Iodeuzm Atjpfx Ah Djbc Financing available via leasing or installment plan. WE ARRANGE MACHINE TRANSPORT!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.500 kg, SCM M2 Caterpillar Multi-Blade Saw 18 kW Specification: • Condition: used • Manufacturer: SCM • Model: M2 • Track width: 220 mm • Maximum working height: 120 mm • Main motor power: 25 HP (18 kW) • Blade diameter: 340 mm • Spindle diameter: 40 mm, bushings 70 mm • Track feed speed adjustable from 6 to 48 m/min • Track in very good condition, not worn • Working table dimensions: 164 x 90 cm • Extraction port diameter: 180 mm • Weight: approx. 1500 kg • Overall dimensions: 220 x 160 x 140 cm (W x L x H) Additional Information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the offered item • Possibility to connect and test the machine on site • The auction price does not include VAT or transport costs Additional photos and video available at the link below: drive.google.com/drive/folders/1u41GyV7Exyaj8dfI1m5fPvTzSnMzhRqd ?usp=sharing Ibjdpfxet Rivys Ah Dec

Stanje: novo, Leto izdelave: 2022, Premer: 40–140 mm Iodpfxedprvuo Ah Dsbc Motor: 2,2 kW Cena za kos

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, MARKON log house drilling machine with undercutter Year: 1990 Manufacturer: MARKON Lathi / Finland Dimensions: Length: 3550 mm Width: 1500 mm Height: 2910 mm Motor power: Drilling unit: 6 x 3 kW Moulding machine: 1 x 5.5 kW Workpiece dimensions: Max. height: 250 mm Min. height: 130 mm Max. width: 250 mm Min. width: 60 mm Min. length: 600 mm Tool sizes and speeds: Ibedpfx Ajfw Rt Reh Doc Max. drilling diameter: 40 mm Moulding machine max. diameter: 250 mm Drilling length: 325 mm Drill arm diameter: 20h7 mm Drilling speed: 2,880 rpm Moulding machine speed: 2,880 rpm AIR Extraction ports Ø 160 mm (2 ports) Drilling unit extraction port diameter: 90 mm (6 ports) Air speed at extraction port: 30 m/s Air consumption: 8,460 m³/h Electrical connection: Total power: 380 V, 24 kW Compressed air connection: Min. pressure: 6 bar Air requirement per drilling cycle: 48 l, total air requirement ~2,200 l/min Includes 3.5 metre roller conveyor + 12 drilling tools

Stanje: pripravljen za uporabo (rabljen), 1.5 kW motor, 2 clamping devices. Bore depth: 13 cm, bore width: 20 cm, bore height: 15 cm. Ibedpfx Ajt D Evpsh Djc

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Chalet Construction Machine for Log House Production Year of manufacture: 1985 Manufacturer: Norway / Finland Max. workpiece height: 200 mm Max. workpiece width: 250 mm 1. End-grooving Milling Unit Max. cutter diameter: 220 mm Max. cutter width: 60 mm Motor: 2.2 kW, 2900 rpm Pneumatic feed 2. Drilling Unit Max. spindle diameter: 16 mm Max. drill bit diameter: 16 mm Motor: 1.1 kW, 1450 rpm 3. Horizontal Milling Unit Cutter diameter: 210–240 mm Isdev Dxn Aepfx Ah Debc Cutter width: 40–100 mm 2 motors, each 2.2 kW, 2900 rpm Vertical Milling Unit Cutter diameter: 210–240 mm Cutter width: 40–120 mm 2 motors, each 2.2 kW, 2900 rpm Hydraulic feed, hydraulic unit with 3.0 kW Equipped with 2 x 4 pneumatic workpiece clamps Pneumatic pressure: 7 – 10 bar Air consumption: 8 Nm³/h Operating voltage: 380 V, 50 Hz Dimensions Machine width: 2700 mm Machine depth: 1830 mm Machine height: 2180 mm + Hydraulic unit (L x W x H): 0.8 m x 0.36 m x 0.8 m Weight: 1,500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, SAFO carbon cutting line - Year of manufacture: 2000 - Semi-automatic - Total line length: 20 meters - Additionally, a set of milling cutters for processing a profile beam in sections of 30 mm to 50 mm The line is 100% operational. Ibsdpfxeulu Udj Ah Doc

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Year of manufacture: 1996 Krüsi CM40, consisting of the following components: - Circular saw (cross-cut saw) - Log home milling unit, horizontal and vertical - Groove milling (horizontal) - Boring unit - Infeed table 6 m - Outfeed table 6 m KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 CE marked Condition: Good, technically inspected and cleaned / ready for operation Operating Principle: Processing of timber for chalet / log house construction. Beams can be processed in a single pass - Cross-cutting - Horizontal and vertical milling of tenons/grooves in a single clamping - Drilling - Cutting the end grooves Workpiece capacity: - Maximum cutting height: 200 mm - Maximum cutting width: 250 mm Sturdy construction with welded frame. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, with hardened and ground guideways for maximum machining precision. Carriage guidance via dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control, Motors protected by thermal relay. Electrical equipment for 380 V, 50 Hz, with protective covers, Central connection for customer-side chip extraction, with 2 eccentric clamps, without milling tools (groovers). With hydropneumatic horizontal and vertical feed, electrically controlled, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air maintenance unit. Timbers thicker than 14 cm must be processed in two passes. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analogue scale Saw blade Ø max. / bore-Ø: 400 / 30 mm Carbide-tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed [min-1]: 2900 Power (kW): 2.2 2. CM Milling Unit (Log House Unit) Hydropneumatic feed Spindle adjustment with digital readout Horizontal milling unit Cutter Ø: 180 mm Cutter width max.: 130 mm For cutter widths above 60 mm, only alloy cutters with indexable inserts may be used 2 motors, hydropneumatic feed, 2.2 kW each Feed: hydropneumatic Rapid traverse and working feed steplessly adjustable 3. Drilling Unit: Iodpfxevfv Tfs Ah Dsbc Manual feed Spindle adjustment with analogue scale Drill holder: ER 25 collet Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor [min-1]: 1450, 1.8 kW 4. Planing Milling Unit: Hydropneumatic feed Spindle adjustment with digital readout Cutter Ø max.: 230 mm Cutter width max.: 60 mm Motor [min-1]: 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Operating pressure on site min/max MPa (bar): 0.7/1 (7/10) Air consumption Nm3/h: 8 Electrical Equipment Operating voltage V/Hz: 380, 50 Rated power (kW): 8.8 - 15.8 depending on version Customer-side fuse protection: 3 x 25 A tr

Stanje: dober (rabljeno), Leto izdelave: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating Principle Processing of construction timber for chalet construction / log house manufacturing The beams can be processed in a single pass • Cutting to length • Horizontal and vertical milling of tenons / grooves in a single clamping • Drilling • Milling of end grooves Workpiece: Iedpfxou Uh T De Ah Dsbc • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction design. Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tools (rebate heads). With hydro-pneumatic horizontal and vertical feed, electrically controlled, operating together with spindle motor start-up. Rapid traverse and feed are steplessly adjustable. Fully wired and installed, including air maintenance unit. Beams with a thickness of more than 14 cm must be processed in two clamping steps. Such beams must be repositioned for re-milling to account for the excess thickness. Safety covers over moving parts with gas strut weight compensation. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analog scale display Saw blade Ø max. / Bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (same direction of rotation) Adjustable riving knife Motor speed: min⁻¹ 2900 Power kW: 2.2 2. CM Milling Unit (Log House Unit) Hydro-pneumatic feed Spindle adjustment with digital scale display Horizontal milling unit Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths above 60 mm, only cutters made from aluminum alloy with indexable inserts are to be used 2 motors, hydro-pneumatic feed, each 2.2 kW Hydro-pneumatic feed Rapid traverse and feed speed steplessly adjustable 3. Drilling Unit: Manual feed Spindle adjustment with analog scale display Drill holder: Collet ER 25 Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor: min⁻¹ 1450, 1.8 kW 4. End Milling Unit Hydro-pneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor: min⁻¹ 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics On-site operating pressure min/max. MPa (bar): 0.7 / 1 (7 / 10) Air consumption Nm³/h: 8 Electrics Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8, depending on configuration Required on-site fuse: A 3 x 25 slow-blow Maximum simultaneous power in use: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Overall height (guard down): 1600 mm Overall height (guard up): 2200 mm Extraction connection Ø (floor extraction): Weight approx.: 1300 kg Incl. roller conveyor 2 x 6 m (2 x 4 m) Technical specifications subject to change!

Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 POS 1: Motorized Roller Conveyor Working width 400 mm, infinitely variable feed speed 2.0 kW motor, length 6000 mm POS 2: Longitudinal Saw Saw blade diameter 400 mm Pneumatic feed for cutting depth Main motor 4.0 kW POS 5: KRÜSI Chalet Construction Machine / Log House Production Machine Type CM 40 Machine No. 431 Year of manufacture: 1996 Saw Unit: Manual feed Spindle adjustment with analogue readout Ibedpfx Aohw N Npeh Djc CM Milling Unit: Hydropneumatic feed Spindle adjustment with digital display Drilling Unit: Manual feed Spindle adjustment with analogue readout Face Milling Unit Hydropneumatic feed Spindle adjustment with digital display POS 6: Motorized Roller Conveyor Working width 400 mm, infinitely variable feed speed 2.0 kW feed motor Length 12000 mm 9 adjustable, pneumatically controlled stop flaps 10 lateral transfer pushers for material transfer POS 7: Assembly Table 4,400 mm x 12,000 mm Manufacturer: Sweden Year of manufacture: approx. 1985 Assembly table for further processing of the manufactured log house beams. 4 chain hoists for crosswise transport Gear motor with 4.0 kW