Stroj za obdelavo lesa

Schmidler S4

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20518, We are offering this used Schmidler S4 joinery machine, year of manufacture 2000. Manufacturer: Schmidler Model: S4 Year of manufacture: 2000 Machine type: Joinery machine - 4-strand cross conveyor (inclined ascending) - Infeed roller conveyor - Zero point detection - Electronically controlled under-table mitre saw - Saw blade diameter: 710mm - Swivel range: 360 degrees - Tilt: 0-65 degrees - Offcut pusher - Marking pen horizontal (from below) and vertical (from behind) - Universal milling head incl. finger joint cutter and dovetail cutter head - Horizontal drilling unit – purlin nail drilling device - Vertical drilling unit - Powered outfeed roller conveyor - Pneumatic push-off stop - Transport and measuring system - Conveyor belts to be renewed - Control: Sema BTL Maximum component dimensions: Dodpfsy Ewxzjx Abgoci Height: 300mm Width: 400mm Total length: approx. 21m Infeed roller conveyor Outfeed roller conveyor with push-off stop and stacking rods Machine used, functional, Conveyor belts need replacement Machine can be inspected by appointment. Available for sale immediately. If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Djdpfefi Tg Hjx Abgjci Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: novo, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of supports: 7 Material: stainless steel tube Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m The length measuring system is available as a retrofit for existing roller conveyors in lengths ranging from 2 to 6 meters. The guide rail is made from rectangular tube 60 x 30 x 3 mm. Dsdpfxefv Atlo Abgjci The steel measuring tape is self-adhesive. The magnifier with 6x magnification facilitates precise adjustment to the desired length. Note: This offer is for the stop system only, without roller conveyor!

Stanje: zelo dobro (rabljeno), TECNI-ARMENTIA CH-70 Edger – hydraulic control – programmable cutting width – storage for up to 12 programs – centering feed table TECHNICAL SPECIFICATIONS: maximum cutting width: 700 mm maximum cutting height: 130 mm main motor power: 55 kW maximum material width: 830 mm length of fixed sleeve: 300 mm length of movable sleeve: 100 mm minimum material length: 700 mm spindle diameter: 65 mm sleeve diameter: 85 mm disk diameter: 350 – 400 mm feed speed hydraulically adjustable, stepless maximum feed speed: up to 38 m/min infeed table length: 2700 mm roller width: 700 mm roller diameter: 140 mm centering infeed table 2 lasers pump motor power: 4 kW anti-kickback pawl row three upper feed rollers three lower feed rollers hydraulic hold-down hydraulic height adjustment dimensions (L/W/H): 480 / 200 / 230 cm weight: 4000 kg Dcedpfeidmptex Abgoi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, številka stroja/vozila: 11470, Funkcionalnost: popolnoma funkcionalen, širina obdelovanca (maks.): 450 mm, Hundegger K2 in very good condition, overhauled, assembled, and commissioned by Hundegger. Since then, it has only run for approximately 20 hours and has been professionally dismantled and stored in a heated hall. Dcsdpfx Ajwhpavsbgei

Stanje: pripravljen za uporabo (rabljen), Four-side planer / Timber planing machine Maximum working width: approx. 55 cm Maximum working height: approx. 14 cm Djdpfxjw Dn Uqo Abgjci Immediately available Location: Austria, near Grieskirchen

Stanje: novo, Leto izdelave: 2024, Delovna širina: 600 mm Delovna višina: 5 mm do 300 mm Dcedpfx Asupy Spsbgoi Minimalna dolžina obdelovanca: 250 mm Agregati: 2 1. Žagalni agregat Random System: izgled žagalnega reza 2. Krtača: Tynex, premer 210 mm Nastavitev višine: električna Prikaz višine: digitalni Podajalna hitrost: 4 - 14 m/min Moč motorja žagalnega agregata: 1,1 kW Moč motorja krtače: 4 kW Moč motorja podajanja: 0,37 kW Dolžina stroja: 1400 mm Širina stroja: 1500 mm Višina stroja: 1600 mm Teža: 700 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, MARKON log house drilling machine with undercutter Year: 1990 Manufacturer: MARKON Lathi / Finland Dimensions: Length: 3550 mm Width: 1500 mm Dcjdpefw Rt Rjfx Abgji Height: 2910 mm Motor power: Drilling unit: 6 x 3 kW Moulding machine: 1 x 5.5 kW Workpiece dimensions: Max. height: 250 mm Min. height: 130 mm Max. width: 250 mm Min. width: 60 mm Min. length: 600 mm Tool sizes and speeds: Max. drilling diameter: 40 mm Moulding machine max. diameter: 250 mm Drilling length: 325 mm Drill arm diameter: 20h7 mm Drilling speed: 2,880 rpm Moulding machine speed: 2,880 rpm AIR Extraction ports Ø 160 mm (2 ports) Drilling unit extraction port diameter: 90 mm (6 ports) Air speed at extraction port: 30 m/s Air consumption: 8,460 m³/h Electrical connection: Total power: 380 V, 24 kW Compressed air connection: Min. pressure: 6 bar Air requirement per drilling cycle: 48 l, total air requirement ~2,200 l/min Includes 3.5 metre roller conveyor + 12 drilling tools

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: GUS 71 Typ 26.813, Frame saw by Wusterer & Dietz Dsdpfx Absv Ummbogoci including: Frame saw Saw blade tensioner Splitting wedge Roller conveyor for frame saw 4-strand puller Inspection possible by appointment.

Leto izdelave: 2013, stanje: rabljeno, KUKA industrial robot with 6 rotary axes featuring point-to-point positioning. Independent control panel Panel alignment table Barcode scanner mounted on the robot arm Panel feeding system consists of: * 1 motorized roller conveyor for pre-loading panel stacks * 1 motorized roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical specifications: * Model: KR210-2 Dcsdpfx Ajr Am Sqobgoi * Number of axes: 6 * Permissible rated payload: 210 kg * Machine weight: 1,267 kg * Sound level: 75 dB * Installed power: 25.8 kW * Panel dimensions – min./max. length: 300/3,000 mm * Panel dimensions – min./max. width: 180/1,500 mm * Panel dimensions – min./max. thickness: 8/60 mm * Maximum panel weight: 90 kg