Horizontalni obdelovalni centri s prehodom (les) nakup rabljenega (143)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, High-speed universal solution for furniture manufacturing and more 9 controlled axes High axis speeds: 130 m/min on the X-axis 75 m/min on the Y-axis Processing of even the smallest parts (from 70x35 mm) True 6-sided machining 2 automatic, independently controlled clamping chucks Horizontal machining also possible from the clamp side 3 independent drilling heads with a total of 47 drilling spindles Grooving saw unit Milling spindles above and below Air cushion table in feed and working area Ihjdpfx Adotu I Ntokew Panel return system at the outfeed Barcode scanner

Stanje: skoraj kot novo (rabljeno), 1 rezkalna enota Ihedoyam Hvjpfx Adkow 8 vertikalnih svedrov 6 stranskih svedrov 1 žaga 12 kW Leto izdelave: 2011

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm - max. 80 mm Workpiece stacking: max. 2 pieces Vertical drilling unit 2V21 HIGH SPEED 7500 Stroke in Z-direction: 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drive: 2 x 2.7 kW Ihsdpfeyg E R Hox Adkjw Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 35 mm Spindle pitch: 32 mm Spindle type: individually controlled Horizontal drilling unit 2H4X/1Y 4 drill spindles each in X-direction 1 drill spindle each in Y-direction Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm from workpiece top edge Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 20 mm Spindle type: individually controlled Grooving saw unit N2 X-Y 90° Cutting depth: 30 mm Cutting cross-section: max. 70 mm² Speed: 1,500 - 7,500 rpm, frequency controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling unit F2-ETP-6 KW Tool holder: for shank diameter d = 25 mm Tool diameter: max. 60 mm Tool projection length: min. 65 mm / max. 95 mm Tool weight: max. 2.5 kg Tool clamping: manual, hydro quick-change system ETP 25 Rotation direction: clockwise/counterclockwise Speed: 6,000 - 18,000 rpm, stepless programmable Drive: frequency-controlled three-phase motor Max. power at tool: up to 5/6 kW in continuous/intermittent operation (S1/S6-50%) EQUIPMENT Material loading "IgeL-ROBOT" Lower workpiece support Upper workpiece support Vertical drilling unit 2 V 21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90 MILLING UNIT F2-ETP-6 KW Barcode reader, make: Datalogic

Stanje: rabljeno, Leto izdelave: 1996, Hladilna enota: da Osi: 3 Št. stroja: 9041 X-hod: 800 mm Y-hod: 550 mm Ihodox U A R Uopfx Adksw Z-hod: 500 mm Stroj je v razstavljenem stanju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, SCM Morbidelli N100 CELL Delovno območje X: 4.286 mm Delovno območje Y: 2.185 mm Delovno območje Z: 150 mm Vertikalne vrtalne glave: 12 Horizontalna vrtala v osi X: 4 Horizontalna vrtala v osi Y: 2 1 rezilo za utore v osi X Menjalnik orodij: 20 Čitalec črtnih kod 3 vakuumske črpalke Krmiljenje SCM eye-M Ijdpfx Aox Tgubjdkohw Dobro stanje

Stanje: rabljeno, Leto izdelave: 2023, New demonstration machine! List price: €86,567 net. Base machine complete in standard configuration for drilling and grooving: Detailed technical data available in the data sheet for ProTec type 0571. Processing unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y4th drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1,000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in throughfeed mode, max. 5,600 mm programmable in the software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, 5.5 kW (S1) motor, 1000-20,000 rpm with frequency converter, clockwise and counterclockwise, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm. Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit. Connected load: 12 kVA Rated current: 17.5 A Fuse: 32 A Voltage: 400 V, 50 Hz, 3-phase (without transformer) Power network: TN or TT Pneumatic connection: 7 bar (102 psi) On machine: Coupling plug (quick coupling) ¼", DN7.2, brass, factory side For the machine: Coupling socket (quick coupling) ¼", DN7.2, brass, customer side Supply pipe, hose inner diameter min. 12 mm Compressed air requirement, continuous air consumption: approx. 230 L/min (about 3.8 L/s) (compressed air) Extraction connection: 3x extraction nozzles, dia. 80 mm Extraction speed: 30 m/sec - measured at extraction nozzle Extraction requirement: min. approx. 2,500 m3/h Machine weight: approx. 1,650 kg (with options!) Machine footprint: In general, a ProTec can be fixed to the floor. Concrete flooring (or foundation) is required (at least under the 4 machine corners/feet). Equipment: - Protec 571 Profit HSK63F with 3-position magazine - Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm - Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamella curtain - Requirement for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec shank ø 10 mm with clamping surface (JSO): 1 HW pyramid point drill bit 5x70mm (NL 35mm), LH #30566-5-05035-L 3 HW dowel drill bit 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW dowel drill bit 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW dowel drill bit 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW dowel drill bit 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW dowel drill bit 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R 1 HW grooving cutter ø 125/30 mm, groove width (SB) 4.0 mm, Z=12, LH, Leitz - Only for chipboard and MDF, solid wood on request and subject to agreement Ijdpow Tfzfofx Adkshw Tool holder HSK63 F 3.00 pcs for collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm, 3.00 pcs Carbide insert shank cutter Z1+1, 1.00 pcs HW with insert drill tip ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW-insert Z1, 1.00 pcs with insert drill tip, D ø 10 mm, d ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separately) Decorative grooving cutter HW-insert Z1, 1.00 pcs

Stanje: rabljeno, Leto izdelave: 2013, Construction de machines : Traverse Dimension d’usinage en X : 1000 mm Dimension d’usinage en Y : illimitée mm Épaisseur d’usinage (dimension Z) : 60 mm Nombre de broches principales : 1 pc Puissance de la broche principale : 3,3 kW Changeur d’outils : Pas de changeur d’outils Unité rainure arrière : fixe en direction Y Broches de perçage verticales - en direction X : 5 pcs Broches de perçage verticales - en direction Y : 5 pcs Vitesse de rotation broche de perçage verticale : 4000 tr/min Broche de perçage horizontale en X : 2 broches doubles Broche de perçage horizontale en Y : 1 broche double Vitesse de rotation broche de perçage horizontale : 4000 tr/min Taille de l’écran : 17" Type de commande : Commande PC Système d’exploitation : Windows XP Clavier à touches : Oui Souris : Oui Système de programmation : Masterwork DXF Interface : Oui Connexion en ligne possible : Oui Lecteur CD-ROM : Oui Version table : Table fixe avec rouleaux Poids env. : 1 300 kg Ihedpfex Urnijx Adkow Dimensions : 2 200 x 2 470 x 1 590 mm Lieu de stockage : Client

Stanje: dober (rabljeno), moč: 10 kW (13,60 KM), Rezkalnik za nasadila za vrata TECHNOMAT 2800 Ihodpfxjykpl As Adksw

Stanje: novo, Leto izdelave: 2024, Axle 920 mm Ihodpfx Aecnz H Hjdksw X-axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min A-axis 360 degrees Minimum workpiece dimensions: Plate: x = 300 mm y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters possible for drilling: 3 - 35 mm The saw blade operates in the X-direction Maximum depth with saw blade: 10 mm Motor: 0.75 HP, 400 Volt Required extraction capacity: 2300 m3/h Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable workpiece plate, stationary working head – Horizontal workpiece plate Iodpfxsdh Tf Ue Adkjhw Control system with Biesse Works software Safety cabin for working head – Safety tread mats No. 1 Infeed table (with conveyor belt) left No. 2 Workpiece clamping block stops within the working area No. 1 Outfeed table (with conveyor belt) right Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1000 x 60 Total connected load (kW): 20 WORKING UNITS (TOP): - No. 1 Electrospindle with HSK D-50 adapter (power 4.8 HP) with static frequency converter - No. 1 Grooving saw (fixed in X direction), diameter 150 mm, power 2.3 HP, with static frequency inverter - No. 29 vertical drilling spindles - No. 10 horizontal drilling spindles (8 in X, 2 in negative Y direction) WORKING UNITS (BOTTOM): - No. 1 Electrospindle with HSK D-50 adapter (power 4.8 HP) with static frequency converter - No. 1 Grooving saw (fixed in X direction), diameter 150 mm, power 2.3 HP, with static frequency inverter - No. 29 vertical drilling spindles - No. 10 horizontal drilling spindles (8 in X, 2 in negative Y direction)

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Moving horizontal table (workpiece), stationary machining head Control system (BiesseWorks software), with separate electrical control cabinet Machining head safety enclosure, safety tread mats Infeed table (workpiece support) at entry side Ihedpfowb Allsx Adkew No. 2 pneumatic workpiece clamping cylinders within the working area Outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm: 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1300 x 60 (approx.) Total connected load (kW): 24 WORKING UNITS (TOP): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW)

Stanje: zelo dobro (rabljeno), CNC flexible automatic through-feed drilling machine (gantry type) with dowel insertion system. Movable panel (workpiece), movable working head (horizontal panel-workpiece). Control: Power Control, Software: WoodWOP. Integrated safety cabin for the machine. Workpiece feed with triple transport belt. Feed speed (m/min): 1 – 90 (approx.). Minimum workpiece dimensions (X-Y-Z) in mm: 250 x 100 x 12 Maximum workpiece dimensions (X-Y-Z) in mm: 3000 x 1400 x 60 Maximum axis travel (X-Y-Z) in mm: 3580 x 1838 x 125 Simultaneous machining of two workpieces possible (in Y-axis): 600 mm + 600 mm Total connected load (kW): 38 WORKING UNITS – TOP SIDE: Drilling unit with vertical spindles (Qty): 1 Independent vertical drilling spindles (Qty): 38 + 3 special Independent horizontal drilling spindles (Qty): 6 Grooving saw unit (for X-axis machining) blade diameter (mm): 100 Vertical main spindle (milling unit): 1 x SK 30 (vertical main spindle power kW 6) Automatic tool change system, carousel changer, positions: 3 WORKING UNITS – HORIZONTAL: Ihodpfx Aed Nvi Dsdkew Drilling unit with horizontal spindles (Qty): 2 Horizontal drilling spindles – right side (Qty): 13 + left side (Qty): 13 Glue injection nozzles and dowel insertion (right side): 2 + (left side): 2 Dowel magazine for automatic dowel insertion (Qty): 1

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving table (workpiece), stationary operating head – Horizontal table (workpiece) Control unit: PowerControl (woodWOP software) Operator head safety enclosure 2x safety interlock workpiece clamping chucks in the working area WEEKE pre-positioning unit – for faster positioning of workpieces in machines with clamp grippers. Support table (workpiece support) at infeed – outfeed table (with conveyor belt) Includes automatic panel pusher Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1000 (option 1300) x 80 (2 x 40 mm) Two workpieces can be machined simultaneously (in the Z-axis) Separate electrical and control cabinet UPPER MACHINING UNITS: 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 kW 23 independent vertical drilling spindles (drill head output 2.3 kW) Ihsdpolkdpmefx Adkew 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW) LOWER MACHINING UNITS: 23 independent vertical drilling spindles (drill head output 2.3 kW) 5 independent horizontal drilling spindles (4 in X + 1 in Y) 1 grooving saw unit (swivels 90° in X-Y direction), blade diameter 125 mm 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW)

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER Movable panel (workpiece), movable working head – Vertical panel (workpiece) Control: TPA – Software: Albatros Safety enclosure for working head Workpiece drive with transport chain Rubber rollers for securing the workpiece during feed and operation Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Minimum working area (X - Y - Z) mm: approx. 260 x 40 x 10 Maximum working area (X - Y - Z) mm: infinite x 1300 x 80 (approx.) Iedpfx Adoihfiiskehw Separate electrical and control cabinet Total connected load (kW): 35 WORKING UNITS: Drilling aggregate with vertical spindles: 1 unit Independent vertical drilling spindles: 24 (7 in X + 17 in Y) Drilling aggregate with horizontal spindles: 2 units Independent horizontal drilling spindles: 36 (9+9 = 18 x 2) Drilling head motor power (kW): 3 x 3 (approx.) Vertical main spindle (milling unit): 1 unit Power vertical main spindle (kW): 7.5 (approx.) Automatic tool changer – Revolver type, magazine positions: 10 tool slots

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Moving panel (workpiece), stationary machining head – horizontal panel (workpiece) configuration Control system: Xilog Plus 2 (software: Xilog Plus 2) Machining head safety enclosure. Separate electrical and control panel No. 2 Safety interlock workpiece clamps within the working area Equipped with automatic panel pusher Infeed table (with conveyor belt) – outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z): 250 x 70 x 10 mm (2 x 5 mm) Maximum workpiece dimensions (X-Y-Z): 3000 x 1300 x 80 mm (2 x 40 mm) Simultaneous processing of two workpieces (in Z-axis) UPPER MACHINING UNITS: 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 KW No. 48 Independent vertical drilling spindles No. 10 Independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 Grooving saw unit – diameter 125 mm Iedpfxjfz I Ufe Adkshw No. 1 x HSK63F vertical main spindle (milling unit), vertical main spindle power 7.5 kW LOWER MACHINING UNITS: No. 48 Independent vertical drilling spindles No. 10 Independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 Grooving saw unit – diameter 125 mm No. 1 x HSK63F vertical main spindle (milling unit), vertical main spindle power 7.5 kW Glue injection nozzles and dowel insertion unit. Automatic dowel magazine for inserting dowels

Stanje: novo, Leto izdelave: 2026, Gannomat ProTec - CNC Throughfeed Machine for Drilling, Grooving, and Milling Operations Brief Overview: • Compact footprint, less than 3.3 m² • Handles large (1000 x 5600 x 60 mm) and small (60 x 250 x 6 mm) workpiece dimensions Iedpfx Adebiplrekjhw • Gentle workpiece handling through air nozzles • Precision ensured by dual laser measurement and workpiece alignment • Fast processing with 21/23 drilling spindles • 21/23 drilling spindles allow for zero setup times • Robust grooving unit for saw blade widths up to 8.3 mm • Powerful milling unit 5.5 kW (S1), optional • Automatic tool changer for milling unit, optional CNC-controlled DRILLING, GROOVING, and MILLING on less than 3.3 m² with high processing precision and zero setup time – this is what the GANNOMAT ProTec stands for. TECHNOLOGY: The robust processing unit is equipped with 13 vertical drilling spindles, 8 double horizontal drilling spindles (6Y & 2X), 1 grooving saw on the Y-axis, and 1 milling unit. This configuration allows all commonly used drills/tools to be ready in a single setup and called up as required. This CNC machining center operates from below and can work in both throughfeed and return-to-operator modes. Steel support tables with air nozzles provide a reference for horizontal drilling, and, combined with robust workpiece clamps and an additional 4th axis at the drilling head, allow for highly precise drilling. A contactless laser sensor detects actual workpiece edges (top and bottom), enabling automatic correction and adjustment of the drilling program. APPLICATION AREA: ProTec offers high-end technology for both operation and application and was developed as an entry-level CNC model for small and medium-sized workshops and, alternatively, as a secondary machine to standard machining centers to prevent production bottlenecks. FIELDS OF APPLICATION: The GANNOMAT ProTec stands out for its universal application range and high customer benefit due to its excellent cost-efficiency. It is specifically designed for maximum flexibility from batch size 1 to series production, as well as for high precision with zero setup time. The GANNOMAT ProTec is designed for complete machining of cabinet side panels, cabinet bottoms, rails, back panels, furniture doors, drawer parts, drawer fronts, countertops, frame parts, tables, sliding doors, templates, and more. Examples of operations include dowel holes, row holes, mounting plate holes, connector and drawer runner bores, fittings, cabinet hanger bores, handle bores, lock bores, etc. The grooving unit enables machining of back panel grooves (also as rebates) or grooves in drawer fronts. The milling unit can perform a variety of milling tasks such as (excerpt): pockets of all kinds, tambour tracks, spot and cable pass-throughs, handle strips, plinth cutouts, recesses for cup handles and furniture locks, lock mortises, ventilation openings in doors, kitchen worktop joints as well as partial routings in, for example, kitchen worktops, furniture frame doors, and much more. Another possible application of the ProTec is the routing of standard milling contours traditionally produced with templates and manual routers. Materials such as chipboard, solid wood, multi-layer boards, lightweight panels, etc., can be efficiently processed with the ProTec.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: nepreverjeno, obratovalne ure: 6.000 h, potovalna razdalja osi X: 3.550 mm, pomik osi Y: 1.680 mm, pomik po osi Z: 275 mm, hitrost pomika os X: 80 m/min, največja hitrost vretena: 24.000 obr/min, TECHNICAL DETAILS Travel range X-axis: 3,550 mm Travel range Y-axis: 1,680 mm Travel range Z-axis: 275 mm Main spindle speed max.: 24,000 rpm Working area X-axis: 3,060 mm Working area Y-axis: 1,210 mm Working area Z-axis: 100 mm Feed rate X: 80 m/min Feed rate Y: 80 m/min Ihedjyc Smgjpfx Adkow Feed rate Z: 25 m/min MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 5,900 x 4,020 x 2,340 mm Weight: approx. 3,350 kg Extraction nozzle diameter: 200 mm Operating hours: approx. 6,000 h EQUIPMENT Linear tool changer with 8 stations, traveling Side pick-up station for 2 tools Traveling pick-up station for HSK F63 aggregate/tool 14 vertical drilling spindles (9 in X-direction and 5 in Y-direction) 6 horizontal drilling spindles (4 in X-direction and 2 in Y-direction) 1 grooving saw (4–10 mm), arranged along the X-axis 1 main spindle HSK F-63, 9 kW Prepared for 0–360° C-axis 6 consoles for mounting vacuum clamps Traveling laser for vacuum cup positioning 2 machining zones for pendulum operation Hand terminal Automatic central lubrication Note: Container loading and seaworthy packing by the seller is not possible.

Stanje: dober (rabljeno), Leto izdelave: 2001, for batch drilling and pressing of cup hinges as well as drilling of handle and lock holes, and center-punching for special fittings and additional drillings at the top and bottom of doors. Workpiece dimensions: Ihsdpfoc Tu Rvjx Adksw • Length: 300 mm – 2500 mm • Width: 200 mm – 800 mm • Thickness: 16 mm – 30 mm • The workpiece width must not exceed the workpiece length! Working height: 970 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, X-axis travel 4250mm Y-axis travel 2210mm Z-axis travel 1000mm Motor: 9.6 Hp Iedswq Ir Nspfx Adkshw Tool changer with 10 positions Drilling head: 10 + 4 + 2 2 pumps x 250 m³/h, total 500 m³/h

Stanje: rabljeno, Complete production line for manufacturing slatted frames (bed bases). From wood processing all the way to final assembly/packaging. Includes all components, such as milling machines, saws, profiling machines, forklifts, compressors, etc. The larger machines/systems are from around the year 2000. Consisting of: Solid Wood Side Rail Production - 2 x Multiple-blade saws RAIMANN KR 450 + KS 310 - Optimizing saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling/Finishing Longitudinal Rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC Drilling and Sawing Machines: - KOCH drilling and sawing line with turning and stacking system - ISE CNC drilling and sawing system with stacking unit - 2 x ISE CNC woodworking centers / drilling systems - ISE CNC cross rail milling machine - 2 x Manual rail drilling machines Single Machines: - GANNOmat CNC drilling and dowel insertion machine - Panhans spindle moulder - 2 x EiMa double saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combined saw-milling machine - 2 x multi-spindle drilling machines - 2 x belt sanders - Paint spray booth - Various small machines Assembly - Assembly automation for standard slatted frames - End cap pressing machine/line - 14 x pneumatic assembly tables Logistics – Factory Equipment - 3 x LINDE forklifts E16 / E20 - 7 x LINDE high-lift/ electric pallet trucks - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder Isdsx S Scbjpfx Adkshw - Kärcher ride-on sweeper - HONDA snow blower - Extraction system for outdoor area - Batch of mesh box pallets + Euro pallets - Racking systems, various Packaging - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Goods - Remaining stock of wood/cross rails - Remaining stock of end caps/plastic parts - Remaining stock of various assembly material Many more PHOTOS and detailed DATA available upon request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, številka stroja/vozila: 25167180701, Funkcionalnost: popolnoma funkcionalen, moč: 4,5 kW (6,12 KM), višina obdelovanca (maks.): 60 mm, skupna višina: 60 mm, skupna širina: 1.000 mm, potreba po zraku: 2.000 m³/h, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 20 m/min, vrtljajska hitrost (min.): 4.000 obr/min, CNC Processing Center Manufacturer: Masterwood Model: Project TF 100 2.0 Technical Specifications: Axes: X-Axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-Axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0–50 m/min Iedpfexz Hgdox Adkshw Z-Axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min The minimum and maximum workpiece sizes depend on the weight and also on the length-to-width ratio. – Air tables in the working area – Roller support at infeed and outfeed – Plate measuring sensor – Ball screw and linear guides – Rack and pinion drive – Centralized lubrication – Import of DXF files Milling unit Including Masterwork Software extension Spindle speed: 1,000 to 18,000 rpm. Motor (frequency controlled): 3.3 kW Incl. integrated extraction control (While drilling, only the drill head is extracted; during milling, only the milling unit is extracted) Drilling head with 16 drills for 5-sided machining Grooving saw unit Milling unit with 6-position tool changer Incl. grooving saw blade, 2 diamond milling cutters, 1 WPL finishing cutter Preparation for CLAMEX and door package 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit designed for door processing for machine with tool changer, complete incl. dedicated tool change station in the tool changer, angle gearbox for receiving a mortise lock cutter, macro for mortise lock Automatic centrally controlled lubrication Monitoring camera

Stanje: novo, Leto izdelave: 2025, Spindle speed: 4460 rpm Min. workpiece dimensions X: 300 mm Min. workpiece dimensions Y: 90 mm Min. workpiece dimensions Z: 10 mm Max. traverse speed X-axis: 20 m/min Iedpol D Rw Njfx Adkohw Maximum tool diameter: 35 mm Max. workpiece dimensions X: 3000 mm Max. workpiece dimensions Y: 900 mm Max. workpiece dimensions Z: 50 mm Grooving saw speed: 5700 rpm Dimensions: 3704 mm x 1455 mm x 2209 mm (L x W x H) Suction nozzle nominal diameter (outside): 120 mm Drive motor power: 2.2 kW Weight: 1200 kg

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, PRODAM HUNDEGGER P10 Ihsdpfxewhn A Nj Adkjw STROJ ZA OBDELOVO STREŠNIH KONSTRUKCIJ. STROJ JE V DOBREM STANJU, DELOVAL JE DO DEMONTAŽE IN JE BIL PREPELJAN NA LOKACIJO, KJER ČAKA NOVEGA LASTNIKA. DEMONTIRAN JE BIL ZARADI PRIHODA DVEH NOVIH STROJEV ISTEGA PROIZVAJALCA. VLJUČENIH JE KAR NEKAJ NOVIH REZERVNIH DELOV, KI ŠE NISO BILI VGRADENI. CENA NI FIKSNA, MOŽEN JE DOGOVOR OB OGLEDU STROJA NA LOKACIJI.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 415 V, Oprema: CE označba, dokumentacija / priročnik, Homag BHX 055 CNC rezkalno-vrtalni center Ihjdpfx Adsytfkmjksw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, številka stroja/vozila: 11470, Funkcionalnost: popolnoma funkcionalen, širina obdelovanca (maks.): 450 mm, Hundegger K2 in very good condition, overhauled, assembled, and commissioned by Hundegger. Since then, it has only run for approximately 20 hours and has been professionally dismantled and stored in a heated hall. Ihedpfowhpavsx Adkow