Kombinirani skobeljni in debelinski skobeljni stroj nakup rabljenega (161)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AB00033534, širina skobljanja: 520 mm, premer gredi skobeljnika: 120 mm, skupna dolžina površin za skobljanje: 2.310 mm, višina ograje za poravnavanje: 1.200 mm, število rezil rezkalnika: 4, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, največja hitrost vrtenja: 5.000 obr/min, Oprema: motorna zavora, Main Features: - Quick-change system for opening the tables - Speed, ergonomics, and safety - Worktable adjustment via parallelogram system - Permanent precision Technical Data: - Usable working width: 520 mm - Total table length: 2310 mm - Cutter block diameter: 120 mm - Planer shaft speed: 5000 rpm - 4 knives, 35 mm x 3 mm x 520 mm - Aluminum jointer fence: 1200 mm x 190 mm - Jointer fence tilting range from 90° to -45° - Min./max. planing height: 3 / 250 mm - Thicknessing feed speed: 5-8-12-18 m/min - Extraction hood diameter for planing: 120 mm - Extraction hood diameter for thicknessing: 120 mm Standard Equipment and Accessories: - Infeed table adjustment by parallelogram system, for chip removal via degree scale - Simultaneous height adjustment and locking of worktables, complete with anti-tilt device - Quick-change system for switching from surface planing to thickness planing (CE version) via a special support for opening the planing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic system - "READY" electronic control including: * Thickness table adjustment * Manual, semi-automatic, and automatic mode with 99 storable work programs * Additional functions: calculator and operation hours counter - Machine table with height adjustment via 4 steel threaded spindles - Feed unit with independent drive for thicknessing - Rubber-coated outfeed roller - Segmented pressure shoe at infeed - Planer shaft and knife holder with markings as positioning aid, with setting gauge for planer knives - Automatic star-delta starter for main motor - Motor power: 9 kW, 50 Hz (11 kW, 60 Hz) (S6 -40%) [S1] 7.5 kW/10 HP, 50 Hz (9 kW/12 HP, 60 Hz), [S6 -40%] 9 kW/12 HP, 50 Hz (11 kW/15 HP, 60 Hz) - Operator tools Safety/Protection: - Micro safety switch for correct positioning of the jointer tables and extraction hoods - Jointer guard (CE version) - Automatic motor brake on main motor - Thermal protection switch - 110V auxiliary circuit - Emergency stop switch - Lockable main switch - CE declaration of conformity (CE version) Gjdpowwv Ufefx Ab Tsuk Scope of delivery: R0.20.20 Linvincibile FS 7 CE version 93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz 34.02.15 "TERSA" cutter block with disposable reversible knives, complete with one set of knives 24.06.15 Tiltable auxiliary fence for thin workpieces 08.32.28 Base

Stanje: novo, - Maximum configuration for the professional with Tersa cutterblock - Ideal for demanding craftsmen and cabinet makers - Extra-long jointer tables for effortless straightening of workpieces - Worktables made of cast iron: durable, resistant and permanently flat - Rearward, simultaneous opening jointer tables for short setup times - Helical-toothed steel infeed roller ensures constant and consistent wood feed - Rubber outfeed roller at the thickness exit guarantees uniform wood output - Four-speed feed system - Thicknessing table adjustment via handwheel with numeric height display - TERSA cutterhead system allows blade changes in seconds and ensures exceptionally quiet operation - The large jointer fence (1200 mm x 150 mm) can remain in position when opening the jointer tables - The high machine weight provides ultimate precision and smooth operation - Pre-fitted for slot mortising unit Digital version with electric thickness table adjustment Technical Data Total table length: 2250 mm Working width: 520 mm Max. planing depth: 5 mm --- Thickness Planer Technical Data --- Thickness table dimensions: 520 x 850 mm Min./max. working height: 3 / 240 mm Min. planing length: 220 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter / Number of knives: 120 mm / 4 - Ideal for demanding craftsmen and cabinet makers - One-piece, extra-long jointer tables for easy surfacing of workpieces - Cast iron tables: robust and always flat - Rearward, simultaneous opening jointer tables with spring assistance for fast and convenient changeover - Fixed extraction hood saves valuable work time during setup – no need to reattach the extraction hose - Helical-toothed steel infeed roller ensures consistent wood feed Guedpfx Abovwd U Io Tok - Rubber outfeed roller at thickness exit ensures even wood ejection - Four-speed feed system - Thickness table adjustment via handwheel with integrated height display - DIGITAL version: Electric thickness table height adjustment and digital display - On/Off switch located at operator position - Powerful industrial motor - High machine weight for maximum precision and smooth running - Pre-fitted for slot mortising unit Technical Data Dimensions and Weights Length (product): approx. 2250 mm Width/Depth (product): approx. 1370 mm Weight (net): approx. 695 kg Jointer Total table length: 2250 mm Max. planing depth (jointer): 5 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Dust Extraction Extraction port diameter (thickness): 1 x 120 mm Installation Information Space requirement length: 2250 mm Space requirement width/depth: 1440 mm Note: Dimensions include maximum travel paths or usable lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height (thickness): 3 mm Max. working height (thickness): 240 mm Min. planing length (thickness): 220 mm Max. planing depth (thickness): 5 mm Electrical Data Drive motor output: 7 kW Connection voltage: 400 V Network frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Maximum planing width: 520 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Surface planer-thicknesser SCM FS410 NOVA Planing width: 410 mm Thicknessing height: 220 mm Guodpfx Abewtytdo Tok Thicknessing table mounted on 4 supports Two feed speeds via thicknesser: 6–12 m/min 4-knife cutterblock Tersa knife system Cutterblock diameter: 95 mm Cutterblock speed: 5000 rpm Additional fence for planing thin workpieces using the surface planer Motor power: 4 kW Surface planer table length: 2200 mm Mortising and boring unit CE Certificate Technical documentation included

Stanje: novo, Holzkraft minimax fs 41e TERSA Planer-Thicknesser 5503451. Professional-grade planer-thicknesser. - TERSA cutterhead system enables particularly quiet operation - Helically-toothed steel feed roller ensures consistent and uniform material feed - Material feed with two speeds - Digital readout for thicknessing table height - 2,000 mm long jointer tables allow easy jointing of large workpieces - Working tables are made of cast iron, stress-relieved and annealed for maximum durability and flatness - Sturdy large aluminium jointer fence with round bar guide (1200 x 160 mm) - Thicknessing table adjustment by handwheel with numeric display for planing height - High machine weight ensures top precision and smooth operation - Powerful industrial-grade motor - Robust steel/cast iron construction - Made in Italy TECHNICAL SPECIFICATIONS Dimensions & Weights Length (product): approx. 2000 mm Width/depth (product): approx. 1110 mm Weight (net): approx. 430 kg Planer (Jointer) Total table length: 2000 mm Infeed table length: 1034 mm Working height: 900 mm Max. planing depth (jointer): 5 mm Jointer fence length: 1200 mm Jointer fence height: 160 mm Gsdpfokyt Iqex Ab Tjuk Dust Extraction Connection Extraction port diameter, thicknesser: 2 x 120 mm Installation Information Required length: 2000 mm Required width/depth: 1670 mm Explanation of requirements: Dimensions reflect maximum usable movement or length. Machine body length: 925 mm Machine body width/depth: 645 mm Working area length: 1000 mm Working area width/depth: 3500 mm Working area note: Add these figures to the installation space required for recommended free space for the machine. Thicknesser Thicknessing table length: 775 mm Thicknessing table width: 423 mm Working height, min.: 3 mm Working height, max.: 230 mm Max. planing depth (thicknesser): 5 mm Electrical Data Drive motor power: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterhead Cutterhead type: TERSA Cutterhead diameter: 87 mm Number of knives: 4 Cutterhead speed: 5200 rpm Max. planing width: 410 mm Feed Feed speed: 6 / 12 m/min SCOPE OF DELIVERY - Jointer fence with round bar guide - Numeric display for thicknessing table positioning - 2 feed speeds for timber infeed - Tersa cutterhead Holzkraft authorized dealer – Accessories available on request!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 410 mm, premer gredi skobeljnika: 100 mm, moč: 5,5 kW (7,48 KM), Oprema: nizka raven hrupa, Surface and Thickness Planer ADH 5-410 *Available at short notice* Demo machine from showroom (factory set and planed) - Spiral cutter block with 66 knives (3 rows of 22 knives each), 15 x 15 x 2.5 mm - Planing width: 410 mm - Planer table dimensions: 1800 x 410 mm - Thicknessing table dimensions: 700 x 406 mm - Cutter block diameter: 100 mm - Cutter speed: 4500 rpm - Max. planing depth (surface planer): 5 mm - Planer fence, anodized, L x W: 1100 x 155 mm Gjdshm Stpepfx Ab Tsuk - Adjustable cutter block guard (standard) - Extraction port diameter: 120 mm - Thicknessing width: 406 mm - Thicknessing height min – max: 4 – 225 mm - Max. stock removal (thicknesser): 4 mm - Feed speed: 8 m/min - Motor power: 400 V / 50 Hz, 4.0 kW - Digital depth display for thickness table (standard) - Required space (L x W): approx. 2000 x 1000 mm - Weight: approx. 450 kg - Pallet truck accessible (standard) - Paint finish: light grey/graphite grey RAL 7035/7024

Stanje: dober (rabljeno), Robland thickness planer-jointer 3 Tersa knives 1 feed speed for thickness planing Maximum thicknessing height: 230 mm Noise-reducing combs in the table Table length: 140 cm Gjdpfovyhmgsx Ab Tsuk Machine in good working condition, ready for operation

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Dimensions and Weights Length: approx. 1725 mm Width/Depth: approx. 880 mm Weight: approx. 270 kg Planer Max. cutting depth: 4 mm Dust Extraction Connection Extraction port diameter, thicknesser: 2 x 120 mm Thickness Planer Min. working height: 3 mm Gjdekwhykspfx Ab Tsuk Max. working height: 230 mm Max. cutting depth: 4 mm Electrical Data Drive motor power: 4 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterblock Type: TERSA Number of knives: 3 pcs Speed: 5200 rpm Max. planing width: 300 mm Feed Speed: 7 m/min Availability: short-term Location: Flörsheim

Stanje: zelo dobro (rabljeno), Technical data: Max. planing width: 400 mm Max. planing height: 240 mm Cutterhead diameter: 120 mm Number of knives: 4 Feed speed: 6-12 m/min Manual height adjustment Extraction port diameter: 110 mm Gjdpfx Absv Rv Dbo Tsuk Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Stanje: rabljeno, with Tersa cutterhead used, good condition Manufacturer: Müller Brugg Model: DA 6 M Gujdpfx Asvwgh Rjb Tok Planing width: approx. 610 mm Planing height: approx. 220 mm Table length: approx. 2200 mm Bridge guard Slotted table lips Low-noise table lips Number of knives: 4 pcs Knife system: - Tersa reversible knives Table feed rollers Required space: approx. 2300 mm x 1500 mm x 1100 mm Weight: approx. 2000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without guarantee or warranty

Stanje: novo, Holzkraft minimax fs 30c TERSA Planer-Thicknesser 5503031 With TERSA quick-change planer knife system Equipped with a TERSA cutterhead for tool-free, lightning-fast knife changes TERSA system ensures particularly quiet operation Helically-serrated steel infeed roller for constant and even wood feed Extra-long, one-piece jointer tables enable effortless planing of workpieces Large fence remains in position when opening the jointer tables Jointer tables open to the rear High machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction; work tables made from stress-relieved cast iron, non-deforming and permanently flat Table lips for quiet operation TECHNICAL DATA: Dimensions and Weight Length (product) approx. 1,725 mm Width/depth (product) approx. 880 mm Net weight approx. 270 kg Jointer Overall table length 1,500 mm Working height 900 mm Max. planing depth 4 mm Extraction connection Extraction outlet diameter 2 x 120 mm Installation Information Required length 1,725 mm Required width/depth 1,350 mm Note: Dimensions account for maximum travel or usable lengths. Machine body length 659 mm Machine body width/depth 488 mm Working Area Length 1,000 mm Width/depth 3,500 mm Note: Please add working area dimensions to installation requirement to get the recommended free space for the machine. Thicknessing Thickness table length 565 mm Thickness table width 300 mm Min. working height 3 mm Max. working height 230 mm Gujdpfxskknb Ho Ab Tok Max. planing depth 4 mm Electrical Data Drive motor power 4 kW Connection voltage 400 V Power frequency 50 Hz Planer Cutterhead Type: TERSA Cutterhead diameter 72 mm Number of knives 3 pcs Cutterhead speed 5,200 rpm Max. planing width 300 mm Feed Feed speed 7 m/min SCOPE OF DELIVERY: TERSA cutterhead Anodized aluminium fence Holzkraft specialist dealer – accessories available on request!

Stanje: zelo dobro (rabljeno), Combined surface and thickness planer 610 mm Tersa cutter block Tersa cutter block, 2 knives, jointer bar Auxiliary fence, motor on pivoting base Dimensions 1800 x 1100 x 950 mm Weight approx. 900 kg Godpeqnurtefx Ab Touk

Stanje: zelo dobro (rabljeno), working width 430 mm 4-knife cutterblock adjustable tilting fence surface planer table length 2,080 mm star/delta starter manual thicknessing table adjustment two feed speeds Guodjw Ad N Ispfx Ab Tok horizontal boring machine

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Approximate length: 2300 mm Approximate width/depth: 1100 mm Approximate weight: 980 kg Gsdpfx Aow I U Nusb Teuk Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Planer fence swivel range: 90 - 45° Extraction port diameter (thicknessing): 120 mm Main motor: 7 kW Required length (installation space): 2300 mm Required width/depth (installation space): 1610 mm Note on required space: The dimensions account for maximum travel paths or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Note on working area: Please add the specified dimensions to the installation space to calculate the recommended free area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Maximum planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: short-term Location: Solingen

Stanje: rabljeno, Thickness planer: Maximum planing width: 410 mm Minimum planing height: 3 mm Maximum planing height: 240 mm Gusdpfx Aoq R Rkrob Tek Minimum length of workpiece: 180 mm Cutterhead diameter: 100 mm Number of knives: 4 2 feed speeds: 7/14 m/min Cutterhead speed: 5000 rpm Manual adjustment of working height Jointer: Total table length: 2200 mm Adjustable tables Cutterhead sound insulation Cutterhead guard Extraction port: 120 mm Tiltable fence: 0-45° Fence length: 1200 mm Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1130 mm

Stanje: novo, - NEW - Manufacturer: Holzkraft Model: FS 41 elite S Tersa Digital Digital version with motorized thicknessing table adjustment - Planer knife system enables knife changes in seconds and ensures exceptionally quiet operation - Extra-long jointer tables (2200 mm) made from a single piece allow effortless planing of workpieces - Working tables are made of cast iron, stress-relieved and annealed for stability, durability, and perfect flatness - Simultaneous opening of the tables - Rearward-opening, simultaneously moving jointer tables for extremely short setup times - Powerful industrial motor - Fixed extraction hood - Robust steel/cast iron construction Gsdpfx Aovwgc Uob Touk - Simultaneous table opening - Large fence (standard with auxiliary fence) - Material feed with two speeds operated by a separate motor Technical Data: Total table length: 2200 mm Working width: 410 mm Maximum cutting depth: 5 mm Thicknessing: Dimensions of the thicknessing table: 775x410 mm Min./max. working height: 3/240 mm Feed speeds: 6/12 m/min Cutterblock diameter / number of knives: 95 mm / 4 pcs Speed: 5000 rpm Motor: 400 V / 50 Hz / S6 - 40% duty cycle, 5.0 kW (6.6 HP) Extraction port diameter: 1 x 120 mm Weight: 450 kg Article No.: 550 3441 Location: 97447 Gerolzhofen - loaded free of charge -

Stanje: novo, Leto izdelave: 2025, VERSION with the most powerful S6 engine with a total power output of 2.6 kW. A more powerful motor ensures stable operation and ease of processing hard materials: Hard wood requires more force to process. The powerful motor can handle this with no problem. Latest machine version with an innovative table opening system: - Competing machines of the old type are equipped with "butterfly" tables. Before each start of operation, it is necessary to calibrate the infeed and outfeed tables with respect to each other. Even minor differences between them lead to material damage, resulting in undesirable effects. - The new solution with combined tables allows for precise adjustment of both tables at the same time! Once adjusted, the tables remain permanently calibrated. When changing planing height, both tables move simultaneously. Godpjvxh A Sofx Ab Tjuk - This solution not only saves time, provides more convenient operation, but also increases planing precision by 30% compared to the old system. This is especially important when working with thinner materials. Effortless conversion from jointer to thickness planer. Switching between jointer and thickness planer mode is quick and simple. It involves unlocking the eccentric clamps, lifting the tables, and repositioning the chip extraction hood. Precision of work: - Stepless height adjustment of tables with scale. - Centralized thickness planing table mounted on a column with a handwheel for up and down adjustment. - Aluminium tilting fence (700x150 mm) with a scale allowing for precise angle setting between 90-45 degrees. Technical specifications: Cutterhead diameter: 75 mm Cutterhead speed: 4000 rpm Extraction port diameter: 100 mm Fence tilt angle: 90–45° Number of knives: 3 Cutterhead length: 250 mm Knife dimensions: 250x30x3 mm Maximum jointer width: 250 mm Maximum thicknesser width: 250 mm Maximum planing height: 180 mm Maximum thicknessing depth of cut: 3 mm Maximum jointing depth of cut: 2.5 mm Thicknesser feed speed: 6 m/min Fence dimensions: 700 x 150 mm Machine dimensions (L x W): 1080 x 269 mm Weight: 175 kg Total motor power: S1: 2.2 kW, S6: 2.6 kW Power supply: 400V

Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, število rezil rezkalnika: 4, dolžina mize: 2.500 mm, širina mize: 600 mm, On offer: A combined surface planer and thickness planer machine Manufacturer: Vertongen Type: C04 Serial number: 1502 Year of manufacture: 1987 Weight: approx. 1,010 kg Operating hours: — Dimensions: Overall length: 2,750 mm Overall width: 1,200 mm Overall height: 1,400 mm Cutterhead diameter: 126 mm Number of knives: 4 Knife type: Tersa Surface planer: Working width: 500 mm Table length: 2,500 mm Cutterblock speed: 4,200 rpm Working height: 850 mm Tilting fence: 45° Thickness planer: Working width: 630 mm Table length: 1,100 mm Maximum cutting depth: 11 mm Maximum planing height: 250 mm Feed speed: 8 & 16 m/min Infeed rollers: 2 Pressure bars: 2 Outfeed rollers: 1 Godpfx Abswttqcs Tjuk Minimum workpiece length: 250 mm Required air volume: 2,600 m³/h Air velocity: >25 m/sec

Stanje: pripravljen za uporabo (rabljen), working width 500 mm Gedpfjrakp Ejx Ab Teuk 4-knife cutterhead traditional knives table length 2,250 mm electric adjustment of the thicknessing table weight 850 kg

Stanje: novo, Leto izdelave: 2021, Nova stroj Leto izdelave: 2021 Dimenzije in teža Dolžina cca 1725 mm Širina/globina cca 880 mm Teža cca 270 kg Ravninska skobeljnica Maksimalen odvzem materiala: 4 mm Priključek za odsesovanje Premer odsesovalnega nastavka, debelina: 2 x 120 mm Debelinska skobeljnica Minimalna delovna višina: 3 mm Maksimalna delovna višina: 230 mm Maksimalen odvzem materiala: 4 mm Električni podatki Moč pogonskega motorja: 4 kW Priključna napetost: 400 V Mrežna frekvenca: 50 Hz Nožna glava Tip: TERSA Število nožev: 3 kosa Število obratov: 5.200 min⁻¹ Maksimalna širina skobljanja: 300 mm Gsdpfew I Ul Nox Ab Teuk Podajalnik Hitrost: 7 m/min Razpoložljivost: takoj Lokacija skladišča: Hochheim

Stanje: novo, Leto izdelave: 2024, Planer: Arbeitstischmaße: 400 x 1800 mm Messerdurchmesser: 70 mm Wellendrehzahl: 5700 U/min Messerdimensionen: 400 x 20 x 3 mm Max. Tischverstellung: 4 mm Gujdpfog S N Agjx Ab Tok Dickenhobel: Arbeitstischmaße: 400 x 760 mm Vorschubgeschwindigkeit: 7 m/min Arbeitshöhe: 4 – 220 mm Allgemeine Daten: Motorleistung (Drehstrom): 4,0 / 3,0 PS / kW Gewicht: 380 kg Die massive Gussausführung des Maschinenkorpus, eine exakte Einstellung des Spans und die hervorragende Verarbeitungsqualität ermöglichen beste Bearbeitungsergebnisse. Die Bearbeitung ist äußerst effizient und präzise. Die schwere Gusskonstruktion des Gehäuses sorgt für eine sichere und leistungsfähige Bearbeitung auch bei großformatigen Werkstücken.

Stanje: novo, - NEW - Description Equipped with TERSA cutterhead for lightning-fast planer knife changes The TERSA planer knife system ensures exceptionally quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed Extra-long one-piece surfacing tables enable effortless processing of workpieces Large surfacing fence remains in position when opening the surfacing tables Surfacing tables open to the rear The substantial machine weight ensures maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction. Tables made of annealed and stress-relieved cast iron, making them resistant and permanently flat Table lips for quiet operation Equipment details: TERSA cutterhead No adjusting or screwing required Planer knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Extraction hose connection The extraction ports for surfacing and thicknessing face the same direction. The hose connection is made from only one side. No hose needs to be looped around the machine. Drive Sturdy chain drive Drive wheels made of steel Gusdpevwga Hjfx Ab Tok Solid cast iron bearing block Planing unit Heavy-duty kickback protections prevent workpiece kickback TERSA cutterhead with three knives ensures optimal planing surface Material feed Helically toothed steel infeed rollers for continuous and even material feed without marking Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Technical data: Dimensions and weights Length (product) approx. 2015 mm Weight (net) approx. 330 kg Width/depth (product) approx. 990 mm Drive power Drive motor power 5 kW Surfacer Total table length 1800 mm Max. cutting depth, surfacer 4 mm Working height 900 mm Extraction connection Extraction port diameter, thicknesser 2 x 120 mm Setup information Required installation length 2015 mm Machine body width/depth 596 mm Required width/depth 1460 mm Working area length 1000 mm Notes on required space Dimensions include maximum travel or effective lengths. Working area width/depth 3500 mm Machine body length 659 mm Notes on working area Add the listed measurements to the required space to obtain the recommended free space for the machine. Thicknesser Thicknessing table length 605 mm Max. working height, thicknesser 230 mm Thicknessing table width 420 mm Max. cutting depth, thicknesser 4 mm Min. working height, thicknesser 3 mm Electrical data Connection voltage 400 V Current type AC Phases 3 Ph Network frequency 50 Hz Planer cutterhead Cutterhead type TERSA Cutterhead speed 5200 min¯¹ Cutterhead diameter 72 mm Max. planing width 410 mm Number of knives 3 pcs Feed Feed speed 7 m/min Included in delivery TERSA cutterhead Anodised aluminium surfacing fence No. 550 3414

Stanje: novo, Leto izdelave: 2025, Planer-thicknesser CORMAK PT310ECO with Spiral Cutterblock – Precision Machining and Work Efficiency The CORMAK PT310ECO is a modern planer-thicknesser designed for high-quality finish, reliability, and low noise levels. Thanks to its spiral cutterblock fitted with 30 replaceable cutting inserts, the machine delivers a remarkably smooth surface with significantly reduced vibration and noise. Its robust construction and powerful motor make it a versatile solution for professional woodworking – suitable for both joinery workshops and craft studios. Key Features Gusdpfew Ab Afjx Ab Tek - Spiral cutterblock – 30 inserts measuring 310x25x3 mm ensure long service life, precise planing, and reduced noise levels. - Heavy-duty cast iron working tables – minimize vibration and guarantee stable material feed. - High power – 2.2 kW (S1) / 2.6 kW (S6) motor ensures consistent performance even during intensive operation. - Large working area – 310 mm planing width and up to 180 mm thickness capacity allow processing of a wide variety of workpieces. - Effective chip extraction – 100 mm diameter extraction port enables efficient connection to dust extraction systems. Construction and Technology The PT310ECO model is equipped with a 75 mm diameter spiral cutterblock, providing smoother operation and greater durability than traditional knives. Each cutting insert can be rotated four times, significantly reducing operating costs. The planer-thicknesser features high-wear-resistant cast iron tables: 1290x310 mm (planer) and 540x310 mm (thicknesser). Additionally, the machine offers fence angle adjustment from 90° to 45°, facilitating precise guidance of the workpiece even at an angle. Precision and Work Efficiency The unit allows a maximum cutting depth of 3 mm in planer mode and 4 mm in thicknessing mode. With a cutterblock speed of 5500 rpm and stable construction, it provides a surface ready for gluing, lacquering, or further processing. This is a reliable thickness planer for wood, well-suited for both serial production and small-scale work. Applications The PT310ECO planer-thicknesser is ideal for: - Professional carpentry and furniture workshops - Prototype shops and training centers - Maintenance departments in industrial plants - Technical schools and trade colleges Standard Equipment - Spiral cutterblock with 30 inserts - Cast iron working tables - Cutterblock guard - 100 mm chip extraction port - Feed switch and safety switch Optional Equipment - Machine transport trolley - Dust extraction system Technical Specifications Planer table size: 1290x310 mm Thicknesser table size: 540x310 mm Spiral cutterblock diameter: 75 mm Spiral cutterblock speed: 5500 rpm Cutting inserts: 310 x 25 x 2.5 mm Fence tilt range: 90–45° Chip extraction outlet: 100 mm Maximum thickness capacity: 180 mm Maximum cutting depth: 3 mm (planer) / 4 mm (thicknesser) Motor power (S1/S6): S1: 2.2 kW / S6: 2.6 kW Maximum workpiece width: 310 mm Weight (gross): 200 kg Choose efficiency and durability. Opt for the CORMAK PT310ECO planer-thicknesser with a spiral cutterblock and provide your production with the highest standard of wood processing. Contact our technical advisor now.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, working width 500 mm length of tables 201 cm tables lifted simultaneously electric adjustment of thicknessing table 4 feed speeds fence with angle adjustment Gusdjrdd R Nopfx Ab Tek main motor power 5.5 kW year of manufacture 2008

Stanje: novo, Leto izdelave: 2025, Planer: Worktable dimensions: 400 x 1800 mm Cutter block diameter: 70 mm Spindle speed: 5700 rpm Knife dimensions: 400 x 20 x 3 mm Max. table adjustment: 4 mm Thicknesser: Worktable dimensions: 400 x 760 mm Feed rate: 7 m/min Gsdpsg S Nx Dsfx Ab Tjuk Working height: 4–220 mm Drilling: Worktable dimensions: 250 x 500 mm Longitudinal / Cross / Vertical travel: 205 / 95 / 90 mm Spindle (M18 x 1.5-S): 0 – 16 mm General parameters: Three-phase motor power: 4.0 – 3.0 HP – kW Weight: 410 kg

Stanje: novo, - NEW - - With TERSA cutterhead for changing planer blades in seconds - TERSA planer knife system ensures particularly quiet operation - Helically grooved steel feed roller for consistent and even wood feed - Exceptionally long, one-piece surfacing tables enable easy dressing of workpieces - Large planer fence remains in position when surfacing tables are opened - Surfacing tables open to the rear - High machine weight ensures maximum precision and smooth running - Powerful industrial motor - Robust steel/cast iron construction - Work tables are made of cast iron, annealed and stress-relieved, making them dimensionally stable and permanently flat - Table lips for quiet operation Features TERSA Cutterhead - No more setting or screwing Gujdpfxsvwgaao Ab Tsk - Change planer blades in seconds - Self-locking - Particularly quiet - Perfect planing results Chip Extraction Hose Connection - Extraction ports for surfacer and thicknesser are oriented in the same direction - Hose connection from one side only - No hose required to wrap around the machine Drive System - Sturdy chain drive - Drive wheels made of steel - Solid cast iron bearing pedestal Planing Unit - Massive anti-kickback fingers prevent kickback of workpieces - TERSA cutterhead with three knives ensures optimum planing finish Material Feed - Helically grooved steel infeed rollers for consistent and even material feed without marks - Multiple teeth engage simultaneously for powerful feed - Wear-free compared to rubber feed rollers Technical Data: Length approx. 1,725 mm Width/Depth approx. 880 mm Weight approx. 270 kg Max. surfacing depth 4 mm Extraction port diameter (thicknesser) 2 x 120 mm Min. working height (thicknesser) 3 mm Max. working height (thicknesser) 230 mm Max. thicknessing depth 4 mm Drive motor power 4 kW Connection voltage 400 V Mains frequency 50 Hz Cutterhead type TERSA Number of planer knives 3 pcs. Speed 5,200 rpm Max. planing width 300 mm Feed speed 7 m/min Item No. 5503031 Stock location: 97447 Gerolzhofen - ex works, loaded free of charge -