Bwo nakup rabljenega (29)

Stanje: pripravljen za uporabo (rabljen), BWO Elektronik AAZ1 083637 CNC axis module, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as shown in photos. Fsdpfji D Ul Sjx Abvsfw

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Helix/Rapid, Overhauled CNC 084564 control unit BWO 900. Software version 800138, Booter V12.0 with interface 084539. Function test, endurance test, and stress test performed on BWO test stand. Application: Höfler Helix 400, Helix 700, Rapid I machines. Fjdpfx Aetp Eh Sobvjfw Upon request, the CNC can be programmed with the correct machine data before delivery. 2 units available, price on request.

Stanje: pripravljen za uporabo (rabljen), BWO Lorenz CNC 785 control panel and display 082205 SN: 4935.001 P2, used, normal signs of wear, 100% functional, delivery scope as per photos Fsdpfxolcf Rbs Abvofw

Leto izdelave: 2014, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2014.6.2, ponujamo naš CNC obdelovalni center STEINHAUER eCAB WorkCenter, letnik 2014, za prodajo. Stroj je trenutno še v uporabi in bo zaradi nove investicije zamenjan z najnovejšim modelom. eCAB WorkCenter je posebej zasnovan za obdelavo kovin in plastike v proizvodnji elektro omar. Idealen je za avtomatizirano vrtanje, rezkanje in rezanje navojev na montažnih ploščah, vratih, stranskih stenah in drugih delih ohišij iz jekla, nerjavečega jekla, aluminija in plastike. Ffsdpfsyg D Rxjx Abvsw Stroj deluje na podlagi CAD podatkov ter je opremljen z zmogljivim CNC krmiljenjem in avtomatsko menjavo orodij. Lokacija: Andritz AG Graz, Stattegger Strasse 18, 8045 Gradec Razpoložljivost: od 02.2026 Tehnične podrobnosti in slike v prilogi.

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M284 2013.5.2, For sale is a Steinhauer eCAB WorkCenter CNC machining center, year of manufacture 2014, in very well-maintained and fully functional condition. The last maintenance was carried out on 13.08.2024. The machine is ready for immediate operation. The eCAB WorkCenter was specifically developed for professional control panel construction and is ideal for automated machining of mounting plates, doors, side panels, and other enclosure parts. It enables precise drilling, milling, and thread cutting of components made of steel, stainless steel, aluminum, and plastic. Machining is CAD-assisted via a CNC controller with high repeat accuracy – perfect for both single-item and series production. Technical highlights: - CNC machining center designed for control panel construction - Automated processing of mounting plates, doors, and enclosure components - Suitable for steel, stainless steel, aluminum, and plastic - High precision and repeat accuracy - User-friendly CNC controller/software Machine data: Ffjdpsymw Haofx Abvew Manufacturer: Steinhauer Model: eCAB WorkCenter Year of manufacture: 2014 Last maintenance: 13.08.2024 Condition & Service: - Very well-maintained, fully functional - No known technical defects - Inspection and test run possible by appointment Scope of delivery: - eCAB WorkCenter including controller - Accessories / tool holders - Documentation / computer with software

Stanje: rabljeno, prevoženi kilometri: 450 km, moč: 129 kW (175,39 KM), prva registracija: 02/2026, vrsta goriva: dizel, skupna masa: 7.200 kg, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 2.000 mm, Oprema: ABS, centralno zaklepanje, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, Are you looking for a different model, engine specification, dimensions, or other options? Feel free to contact us. We offer financing and leasing on attractive terms – also available for the Netherlands, Austria, and for new businesses! --- Vehicle Specification: * Wheelbase: 4,100 mm * 6-speed manual gearbox * Single cab * Twin rear wheels (rear axle) * Gross vehicle weight: 7.2 tonnes * Digital tachograph * Speed limiter: 90 km/h Interior: * Passenger bench seat with multifunction storage * Overhead storage above the windscreen * Luxury, heated, suspended driver’s seat * Grab handle on A-pillar * Comfort headrests * Multifunction leather steering wheel * Cloth seat covers Safety & Assistance Systems: * ESP (Electronic Stability Program) * AEBS & City Brake (Advanced Emergency Braking System) * Driver’s airbag * Forward area monitoring (MOIS) * Electronic operating and maintenance manual * Rear parking sensors * Lane centering assist Plus (LC) * Eco-Smart function * Additional speed limiter * Seat belt warning signal (F/B) * Drowsiness detection system (DDAW) * Right-turn assist (BSIS, passenger side) * Rear blind spot radar * Traffic sign recognition incl. ISA Fedot Rrfdjpfx Abvefw * Spare wheel Wheels & Technology: * Electrically adjustable and heated mirrors * Digital radio DAB with 7” touchscreen * Apple CarPlay/Android Auto * All-weather tyres * AIRPRO air suspension (rear axle) * Manual handbrake centrally positioned * Automatic climate control * Heated fuel filter * Additional hot water heater * Light & rain sensor * Fog lights * Full LED headlights * Connectivity Box 4G incl. TCO * Adaptive cruise control (ACC) * Toll system preparation (OBU) * Central locking with remote control * AdBlue tank 20 L and driver’s heater * Fuel tank 90 L integrated * 12V 110 Ah battery Refrigerated Box Body: * Insulation: 80mm/100mm * Anti-slip floor surface * Reinforced floor * Tailgate * Side door with separate lock and entry step * Combination lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior LED lighting * Roof spoiler * Drain holes at front of body * Reversing camera * Side underrun protection * Aluminium mudguards with mud flaps * Side marker lamps Refrigeration Unit: * Thermo King V 500X 50 MAX * Cooling in both driving and stationary mode * Touchlog standard Tail Lift: Dhollandia * Model 10 * Load capacity: 1,000 kg * Platform depth: 1,800 mm * Anti-roll-off protection * LED warning lights * Remote control with spiral cable * Foot control Additional extras and bespoke superstructure options available at extra cost. --- Notice: Please give us a call before visiting – we’ll ensure your desired vehicle is available on site. If not in Wachtendonk, we are happy to deliver from our stock. Individual superstructure on request possible. Your vehicle partner since 1996. Call or email us today – we look forward to hearing from you! No liability for printing or typographical errors. Subject to prior sale and changes. Kind regards, Pimenta Automobile

Leto izdelave: 2005, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, For sale is a Steinhauer eCAB WorkCenter in good, well-maintained condition. The machine has had little use and is fully operational. The machine can be inspected and tested by appointment. If you have any questions, please do not hesitate to contact us. Ideal for professional enclosure construction; suited for milling and drilling mounting plates, doors, and enclosures. Technical highlights: - Precise CNC machining center specifically designed for electrical enclosure manufacturing - Suitable for steel, aluminum, and plastic panels - Automated processing of mounting plates, cabinet doors, and housings Ffedpex Il Nyofx Abvsw - High repeat accuracy and easy operation via user-friendly software - Ideal for single or series production - Year of manufacture: 2005 Condition: - Well-maintained, ready for operation - No known technical defects Scope of delivery: - eCAB WorkCenter including controller - Accessories and tool holder - Documentation / software license Year of manufacture: 2005 PC software updated: 2019 In 2019, the PC was replaced (Windows 10) to ensure compatibility with Eplan Propanel.

Stanje: rabljeno, prevoženi kilometri: 113.559 km, moč: 115 kW (156,36 KM), prva registracija: 11/2012, vrsta goriva: dizel, lastna masa: 5.060 kg, največja dovoljena obremenitev: 2.640 kg, skupna masa: 7.490 kg, konfiguracija osi: 4x2, medosna razdalja: 3.600 mm, naslednji pregled (TÜV): 03/2024, zavore: zaviranje z motorjem, voznikova kabina: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo, število sedežev: 3, dolžina tovornega prostora: 5.200 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.400 mm, Oprema: ABS, dvižna zadnja plošča, filter saj, kabina, računalnik na krovu, servovolan, * German vehicle * 2 vehicles available * Condition as per photos * Flatbed tarpaulin * Neutral tarpaulin in undamaged condition * Sörensen tail lift * Type X1A 1000 * Wooden loading floor with DIN lashing eyes * Loading area: length 5.20 m, width 2.45 m, height 2.40 m * Cab with 3 seats * Air-suspended comfort driver’s seat * 6-speed manual gearbox * Electric mirrors * Stereo CD player * Roof hatch * Leaf spring suspension front and rear * Wheelbase: 4,220 mm * Gross vehicle weight: 7,490 kg * Unladen weight: 5,060 kg * Payload: 2,430 kg If a new TÜV inspection is required, we are happy to provide you with an offer from one of our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our website at Fjdpfx Abjvhp Izjvefw We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend that you inspect and check the goods to avoid any misunderstandings regarding condition and suitability. Inspections and checks are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We do not accept liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 53.216 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22024211, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 20.000 obr/min, TEHNIČNI PODATKI Pomik X-os: 2.000 mm Pomik Y-os: 1.000 mm Pomik Z-os: 600 mm Hitrost vretena: 20.000 obr/min Hitrost hitrega pomika X/Y-os: 60 m/min Hitrost hitrega pomika Z-os: 45 m/min Vpenjalo orodja: HSK-63F Dimenzije vpenjalne mize: 2.000 x 1.000 mm PODROBNOSTI O STROJU Tip krmiljenja: BWO CNC Obratovalne ure: 53.216 h OPREMA 5 kompaktnih vpenjal (model: Kopal Duo) Dodatni strojni ščit (lastna izdelava) Zasukljivo vreteno Zunanji hladilni agregat (proizvajalec: Pfannenberg, hladilna moč: 1,7 kW) Fjdpfxjyq Nx Ns Abvsfw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 73.695 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22021508, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 20.000 obr/min, model krmilnika: BWO RC, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNI PODATKI Ffedpfoyq Nx Aex Abvsw Pomik X-os: 2.000 mm Pomik Y-os: 1.000 mm Pomik Z-os: 600 mm Hitrost vretena: 20.000 vrt./min Hitri pomik X/Y-os: 60 m/min Hitri pomik Z-os: 45 m/min Orodno držalo: HSK-63F Mere vpenjalne mize: 2.000 x 1.000 mm PODROBNOSTI STROJA Krmilna enota: BWO RC Delovne ure: 73.695 h OPREMA Premično vreteno Sistem hlajenja (MMS) Zunanja hladilna enota (proizvajalec: Maka) Nova kroglična vretena na Z-osi, vgrajena leta 2024 s strani Maka servisa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.740 mm, pomik po osi Z: 1.050 mm, skupna višina: 3.400 mm, skupna masa: 7.000 kg, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 10.000 W, teža orodja: 3.000 g, število osi: 5, This 5-axis MAKA MK 7s was manufactured in 2007. It features a robust frame weighing 7,000 kg, operates at 400V/50Hz and has a rated power of 18.5 kW. The machine is equipped with a BWO 910 RC control system and a versatile HSK 63F milling spindle. The linear tool magazine accommodates both tools and saw blades, complemented by an aluminum table measuring 2000 x 1000 mm. Take advantage of this opportunity to purchase the MAKA MK 7s horizontal machining center. Contact us for further information. • A-axis: ±100 degrees • C-axis: ±270 degrees • Travel paths: X-2900 mm / Y-1740 mm / Z-1050 mm / A ±100 degrees / C ±270 degrees • Table size: 2000 x 1000 mm • Aluminum plate adapter: 1200 x 980 mm, 40 x 40 mm grid, M12 threads Ffodpex D Dlcofx Abvew • Tool cooling: Minimum quantity lubrication (MQL) • Tool magazine: Linear tool magazine with 5 positions for tools up to 60 mm diameter and max. 130 mm length • Saw blade holder: 1 slot for saw blades up to 175 mm diameter • The last series produced with aluminum profiles. Supply voltage: 400V / 50 Hz. Rated current: 50 A. Rated power: 18.5 kW. Operating pressure: 6 bar pneumatic pressure. Additional equipment • MAKA safety enclosure, open at the top and with two manually operated doors at the front Dimensions: Machine depth: 6000 mm

Stanje: zelo dobro (rabljeno), Wheel diameter – max. 300 / 400 mm Wheel width 76 mm Module – max. 6 Module – min. 0.5 Control system BWO CNC 921 Stroke slide displacement 94 mm/stroke Stroke 82 mm Strokes per minute 75 – 1000 spm Number of teeth 5 – 200 Cutter arbor mount SK 45 Table diameter 400 mm Total power requirement 50 kW Machine weight approx. 7.5 t Fodpfx Aoydfn Tebvsfw Space required approx. 5.0 x 3.8 x 3.4 m Machine in very good condition!

Stanje: rabljeno, Leto izdelave: 2003, upravljanje BWO Največji premer glave: 700 mm Najmanjši premer noge: 50 mm Največja višina profila: 35 mm Število vrtljajev vretena: 0 - 5400 min⁻¹ Največja obremenitev mize: 500 kg Dimenzije stroja: 370x220x300 cm Skupna teža: pribl. 15.000 kg Obratovalne ure: 94.082 h Oprema: Upravljanje BWO Vse osi CNC krmiljene Odvod oljne megle Ffjdpfjxt Ur Sox Abvow Naprava za čiščenje hladilne tekočine s hladilno enoto Izravnalna enota Dittel Dodatki: Brusni koluti Ø400 mm z vključenimi koluti Flanše za brusne kolute 1 diamantni stiskalni valj Dr. Kaiser Ø160 mm Kontra konica Krmilna omara: Širina 70 cm x dolžina 280 cm x višina 220 cm Stroj: Širina 220 cm x dolžina 370 cm x višina 300 cm Hladilni sistem: Širina 170 cm x dolžina 240 cm x višina 250 cm

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), A CNC 4-axis milling and drilling machine Maka for plastics, wood, and aluminum is available. Travel range X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle interface: HSK63, spindle power: 12kW, spindle speed: 24,000 rpm. Tool stations: 12, angle head positions: 3. Machine dimensions X/Y/Z: 12,000mm/5,700mm/3,200mm, control system: BWO 920. Documentation available. An on-site inspection is possible. Ffodpfx Abovmq Tvovjw

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Travel paths X/Y/Z: 12,100 mm / 2,350 mm / 800 mm, A-axis swivel: +/-98°, Rapid traverse X/Y/Z/A: 45 / 45 / 24 / 10 m/min, Machining length: 11,000 mm, Spindle speed: 24,000 rpm, Table: 10 support traverses, 2 hydraulically swiveling workpiece stops, Control: BWO 930, Operating hours: 23,792 h, Dimensions X/Y: 18,300 mm / 6,250 mm. Includes travelling gantry design with dual-sided gantry drive, coolant spray system with minimal-quantity fine atomization. Documentation available. Fsdpfotqfqxsx Abvefw

Stanje: potreben popravila (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, obratovalne ure: 52.751 h, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, potovalna razdalja osi X: 975 mm, pomik osi Y: 9.100 mm, pomik po osi Z: 575 mm, dolžina obdelovanca (maks.): 8.500 mm, širina obdelovanca (maks.): 450 mm, višina obdelovanca (maks.): 225 mm, število mest v zalogovniku orodij: 32, proizvajalec krmilnikov: BWO, skupna masa: 16.600 kg, model krmilnika: CNC 920, neprekinjen delovni tlak: 6 letvica, nazivna (navidezna) moč: 12 kVA, število vreten: 1, največja hitrost vrtenja: 20.000 obr/min, vrtljajska hitrost (min.): 1.000 obr/min, MAKA AP70 5-Axis Year of manufacture: 2005 Portal weight including unit and tool changer approx. 15,000 kg Control cabinet weight approx. 1,600 kg Operating voltage 400 V / 50 Hz Operating pressure 6 bar Compressed air consumption approx. 2,000 liters/hour uncompressed Control type BWO CNC 920 Controlled axes + max. traverse paths approx.: X - 975 / Y - 9100 / Z - 575 / A - ±270° / B - ±98° Milling motor HSK 63F / 12 kW from 12,000 rpm, speed range 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 slots / 160mm Machine table: 2 clamping stations with 6 support beams with clamping / pneumatic clamping devices Ffodpfx Asv Rlpyobvjw Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - ±270° / B - ±98° The machine is currently not operational. The spindle including conversion kit to newer software needs to be replaced (can be requested from Maka). The machine can be inspected under power at DE94424 Arnstorf by appointment. All information without guarantee, sale only to commercial buyers. Inspection and collection by arrangement in 94424 Arnstorf (Germany).

Stanje: dober (rabljeno), Leto izdelave: 2005, Used machine MAKA PE 70 5-axis CNC machining centre for working wood and plastics. Machine in gantry design, with rack and pinion drive. Year of manufacture: 2005 Technical Data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cups) Working areas in 3-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cups) A-axis 540° (rotary axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse X/Y-axes 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° angle head, power 7.5 kW (S1) 10 kW (S6), infinitely variable speed up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface HSK-F63 for automatic tool changer system. - 1 horizontal drum magazine with 20 tool spaces for tools up to D = 90 mm, with sorted placement up to max. 160 mm (three spaces required for this). Machine table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 x control circuits for stops "raise / lower" - 2 x control circuits for sliding rail "raise / lower" - 2 x control circuits for pneumatics "clamp / release" - 2 x vacuum control circuits with buttons for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated in the base frame, for removal of chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine equipped with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with reservoir. - Vacuum supports with various suction pads. Other features: - Automatic central lubrication. - Control cabinet with air conditioning unit. Workplace safety: - Moving protective cabin with safety bumpers on the operator side. Repairs / maintenance prior to delivery: - Service performed. - Lamella curtain at gantry new - Sliding window new - Energy chain Y-axis new - Energy chain Z-axis new Fsdpfxjvr A A Te Abvsfw - Various cables and air hoses replaced.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Used Machine MAKA PM 270 R 5-Axis CNC Machining Center for processing wood, plastic, and aluminum. Gantry design with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC control BWO 900C for 5-axis machining. Fsdpfjvmywqsx Abvjfw Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups) Working areas in 3-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups) A-axis 540° (rotary axis), B-axis 200° (swivel axis +/- 100°) Rapid traverse X/Y-axis: 45 m/min. Z-axis: 24 m/min. A/B-axis: 10 m/min. Milling Unit: - 1 universal unit for 5-axis milling with 50° angled head, max. output 12.5 kW, infinitely variable speed up to 17,000 rpm, spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamellar curtain. Tool Magazine: - Tool interface ISO 40 for automatic tool changing system. - 1 chain-type tool magazine with 32 slots for tools up to D = 90 mm, sorted storage up to max. 160 mm (three slots required). Machine table: - 10 support tubes on linear guides with pneumatic release device for rapid positioning. - 2 control circuits for stops "raise / lower" - 2 control circuits for slide bar "raise / lower" - 2 control circuits for pneumatics "clamp / release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated into the base frame for transporting chips and small offcuts up to approx. 100 x 100 x 100 mm. Tools: Tools are not included! Delivery can include various tool holders upon agreement. We would be pleased to provide you with a separate offer. Vacuum System: - 1 vacuum pump, approx. 140 m³ suction capacity, including 250 L tank for rapid vacuum build-up. - 10 vacuum supports with various suction pads. - Various clamping devices for posts and curved elements. - Stops raise / lower for workpiece positioning. Miscellaneous: - Automatic central lubrication system. - Control cabinet with climate control unit. - Projection laser Occupational Safety: - Moving protective cabin with safety bumpers on the operator side.

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for processing wood, plastic, and aluminum. Gantry design machine with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical specifications: CNC control BWO Vektor 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (top edge of vacuum cups) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum cups) A-axis: 540° (rotary axis), B-axis: 196° (swivel axis +/- 98°) Rapid traverse speed: X/Y axis 45 m/min, Z axis 15 m/min, A/B axis 10,000°/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, max. power 12.5 kW, steplessly adjustable speed up to 17,000 rpm, milling spindle water-cooled. - 1 CNC height-adjustable chip collection system with lamellar curtain. Ffedpfjvmpx Rex Abvsw Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 2 chain tool magazines with 32 positions each for tools up to D = 90 mm, with sorted storage up to max. 160 mm (three positions required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for stops "raise/lower" - 2 control circuits for pneumatics "clamp/release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 2 stepped separating devices, lift approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor integrated into the base frame for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! Vacuum supply: - 1 vacuum pump including a 250-liter tank for rapid vacuum build-up. - approx. 20 vacuum supports with various suction plates. - 4 stops raise/lower for positioning components. Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser. Occupational safety: - Traveling safety cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axes to a new generation of drives (digital). - New energy chains for Y / X / Z axes. - Complete rewiring, all power and measuring system cables replaced. - All guide carriages replaced. - Z-axis ball screw and guide rails new. - X-axis guide rail new. - Control system conversion to BWO Vektor 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 tool magazines + tool changers overhauled. - Swivel extraction unit overhauled. Software: - It is possible to include a current version of the COMPASS stair construction software. Compass is the leading provider for planning and manufacturing of wooden staircases.

Stanje: rabljeno, Leto izdelave: 2000, Used Machine MAKA CNC Door Processing Center HC 55 TBZ Year of Manufacture: 2000 Door processing center for machining interior doors (hardware recessing, light cut-outs, peephole milling, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: for door width: 250 – 1,280 mm for door height: max. 2,500 mm for door thickness: max. 80 mm Rapid traverse speed: X-/Y-axis 45 m/min. Z-axis 10 m/min. 1 universal milling unit SK40 Fodpfx Abjv S Dn Dovofw with integrated A swivel axis 190° (+/- 95°), in X-axis direction for lock/hinge processing on both sides along the door edge directly with the unit. Milling spindle water-cooled, rated power 8 kW, available from 7,000 rpm, speed infinitely variable from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. 1 chain tool magazine with 24 stations, for tools up to Ø 90 mm, with sorted storage up to max. Ø 160 mm, arranged at the unit exit position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 magazine stations set up for use of angle/probing heads with torque support. Machine table with programmable width adjustment and width measurement for processing with edge bander for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically liftable and lowerable. 1 longitudinal stop with pneumatic setting stroke, mounted traveling with the unit for positioning to door length and door thickness. 4 pneumatic stops, swinging in from the side, for doors with veneer/overlapping face panels up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single-/double-rebate doors). 2 vacuum clamping lines, each with 5 vacuum cups, 130/200 x 70 mm, with feeler valve and blow-off equipment. Per line, 3 vacuum cups lowerable to match door height being processed. 1 vacuum pump approx. 128 m³/h suction capacity, with 250-liter buffer tank, for quick vacuum buildup. Automatic central lubrication, free-standing control cabinet with air conditioning unit. Occupational safety: bumpers on both sides of the gantry, side safety fence. Various tools and tool holders can be included by prior arrangement. The machine can be inspected in Hermaringen.

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter – max. 400 mm Number of teeth – max. 150 Module – max. 5 Total power requirement: 16 kW Machine weight approx. 10 t PRÄWEMA CNC Gear Edge Milling Machine using Continuous Hobbing Process For chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch hubs, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine no. 05610 Workpiece diameter min./max.: 30 – 400 mm Number of teeth: 6 – 150 Maximum module: 5 Tool holder / shank Ø: SK 30 / 20 mm Tool speed / spindle power max. continuous: 4,000 rpm or 1.8 kW Feed rates transverse & longitudinal: 0.001–12 m/min Max. workpiece rotation speed (1.5 kW) - C axis: 2,000 rpm Total drive: approx. 16 kW – 380 V – 50 Hz Weight: approx. 10,000 kg Accessories / Special Equipment: • BWO (HECKLER & KOCH) CNC control Type 785 H for up to 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation • Two milling spindle units (left and right), adjustable in all necessary angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axis = milling spindle, C axis = workpiece spindle rotation. Manually controlled: Tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital position indication in the control. • Hydraulically actuated workpiece clamping device in conjunction with loading automation via workpiece feeder/conveyor belt and swing loader, as well as air system monitoring for the workpiece. • Coolant unit with chip conveyor, soundproof enclosure, central lubrication, built-in hydraulic system, pneumatically operated safety doors, deburring device, etc. The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining both symmetrical and asymmetrical straight chamfer shapes. Characterized by high productivity and precision. Condition: good to very good – soon ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Ffedpfx Ajt Hwylobvew Further machines for processing transmission components are always in stock. Please inquire about your requirements with us.

Stanje: rabljeno, Leto izdelave: 2000, Grinding diameter: 360 mm Grinding length: 1600 mm Centre height: 180 mm Internal diameter: 0 mm Grinding depth: 0 mm Swing diameter: 0 mm Total power requirement: 40 kW Machine weight approx.: 10,000 kg Space requirement approx.: m KARSTENS Universal "CNC" External, Internal and Face Grinding Machine with capabilities for multi-sided, non-circular, polygon, and thread grinding BWO CNC control Type 900 C, Type K 51-1500 Year of manufacture: 2000 Serial no. 99 033 _____ Centre height: 180 mm Centre distance / Grinding length: 1,700/1,600 mm Max. workpiece weight between centres: 250 kg External grinding: Grinding diameter approx.: 5 - 360 mm Grinding wheel size (diameter x width x bore): 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s): 1,900 / 2,200 rpm Drive power external/face/internal: 7.5 / 7.5 / 4.0 kW Grinding spindle head: 3 positions B-axis swivel range: 240 / 17.5 ° X-axis / Cross slide stroke: 360 mm Grinding slide feed rate: 0.001 – 125 mm/min Workpiece spindle speeds, steplessly adjustable: 1 – 1,000 rpm C-axis spindle mount / Bore, 24 mm MK 4 Table feed (Z-axis): 0.01 – 10 m/min Total drive power: 40 kW - 400 V - 50 Hz Weight approx.: 10,000 kg Accessories / Special features: Universal CNC cylindrical grinding machine for almost all grinding tasks, suitable particularly for non-circular grinding / eccentric & cam profile grinding, polygonal grinding, as well as face grinding of multi-sided workpieces and even thread grinding with corresponding grinding wheel profiles. Freely programmable BWO CNC controller with numerous subprograms and easy parameter input. Grinding of multiple diameters in a single clamping possible. - B-axis with three grinding spindles, one with MOVOMATIC touch probe Ffodpfx Abjt Hw Rdovew - MOVOMATIC pneumatic diameter gauge CR 60 for mounting on the grinding table, control unit type ES 400 - MPM grinding wheel balancing unit, straight dresser with diamond fleece mounted on table, powered diamond wheel dressing device - Workpiece spindle head pneumatically movable, hydraulic tailstock with adjustable quill - Various further accessories, but without coolant equipment Condition: good to very good – demonstration possible under power Ideal machine for spindle manufacturing, etc. Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice

Leto izdelave: 1991, stanje: rabljeno, Wheel diameter - max. 0 mm Number of teeth - max. 0 Module - max. Module - min. Total power requirement kW Machine weight approx. t Space requirement approx. m CNC-controlled synchronizer ring milling machine ideal for synchronizer rings, BWO control 785 H Ffsdst Hwv Hepfx Abvow

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Ffedpfx Aot Hwxbjbvow Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, MAKA ECM 27 R Year of manufacture: 1998 • High-performance CNC machining center for 5-axis operations, ideal for aluminum processing and mold making. • MAKA ECM 27 R in portal design. • Equipped with automatic central lubrication system and control cabinet with air-conditioning unit. • CNC control BWO 900C, 1 MB memory, integrated PC. • Portable control panel BWO RC 910. Fodpfx Ast Dl U Ejbvsfw Technical data: Working areas / working envelope (cube): With tool length 130 mm and Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm (with fixture height 170 mm) A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y axis: 40 m/min Z axis: 15 m/min A/B axis: 10,000 °/min 1 pc. milling spindle 11 kW, Variable spindle speed from 2,000 – 17,000 rpm, With ceramic bearings and liquid cooling. Tool holder SK 40 with automatic tool changer. 1 pc. chain-type tool magazine for 12 tools up to Ø 160 mm, including 2 positions for angular drilling heads (fixed-position coded), SK40. 1 pc. steel surface table 3,000 x 2,250 mm with T-slots. 1 pc. vacuum pump approx. 140 m³/h, with 250-liter tank. 1 pc. vacuum clamping circuit. Work safety: With safety enclosure for the rear of the machine, side access door, cabin open at the top. Lamella curtain on operator side and safety bumper on the front of the table. Repairs / refurbishment before delivery: - Maintenance. Electrical connection values: Voltage: 400 V (max. +/- 5%), Frequency: 50 Hz Rated power: 22.5 kW Use of an RCD protective device in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 10 m³/h No tool holders and machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee. Optional: Including installation and commissioning with handover ready for production!