BWO 900

BWO 084564 CNC

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for processing wood, plastic, and aluminum. Gantry design machine with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical specifications: CNC control BWO Vektor 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (top edge of vacuum cups) Working areas in 3-axis operation, with tool Ø 60 mm / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum cups) A-axis: 540° (rotary axis), B-axis: 196° (swivel axis +/- 98°) Rapid traverse speed: X/Y axis 45 m/min, Z axis 15 m/min, A/B axis 10,000°/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, max. power 12.5 kW, steplessly adjustable speed up to 17,000 rpm, milling spindle water-cooled. - 1 CNC height-adjustable chip collection system with lamellar curtain. Tool magazine: - Tool interface ISO 40 for automatic tool change system. - 2 chain tool magazines with 32 positions each for tools up to D = 90 mm, with sorted storage up to max. 160 mm (three positions required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for stops "raise/lower" - 2 control circuits for pneumatics "clamp/release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 2 stepped separating devices, lift approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor integrated into the base frame for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! Vacuum supply: - 1 vacuum pump including a 250-liter tank for rapid vacuum build-up. - approx. 20 vacuum supports with various suction plates. - 4 stops raise/lower for positioning components. Miscellaneous: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser. Occupational safety: - Traveling safety cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axes to a new generation of drives (digital). - New energy chains for Y / X / Z axes. - Complete rewiring, all power and measuring system cables replaced. - All guide carriages replaced. - Z-axis ball screw and guide rails new. - X-axis guide rail new. - Control system conversion to BWO Vektor 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. Gjdpfjvmpx Rsx Ahmobn - 2 tool magazines + tool changers overhauled. - Swivel extraction unit overhauled. Software: - It is possible to include a current version of the COMPASS stair construction software. Compass is the leading provider for planning and manufacturing of wooden staircases.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, MAKA BC 150t compact, used machine 5-axis CNC machining center for processing aluminum and plastic. Gantry-type bridge construction with 4 columns, 2 x aggregate carriers. Technical Data: Working areas in 5-axis operation, with tool Ø 160 mm / tool length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm (with 180 mm fixture height) Gsdstq Hkropfx Ahmobn Linkable tables for machining large parts. Extended travel stroke for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotary axis 540° / Swivel axis 196° (+/- 98°) Table design: - 2 x aluminum surface tables, size 2,500 x 1,500 mm - Threaded bushings M10 and centering pins in the tabletop - 3 x vacuum clamping circuits per table - 3 x pneumatic clamping circuits per table Milling units: - 2 universal aggregates for 5-axis milling, with 50° angle head, HSK F63 tool holder, max. power 12.5 kW (S1), infinitely variable speed up to 24,000 rpm, water-cooled milling spindle - 1 NC height-adjustable chip extraction system per milling unit, with lamella curtain Tool changer: - 2 x rotary disc tool magazines with 20 positions each Control system: - 1 x Siemens SINUMERIK 840D SL machine control - 1 x Siemens OP 19 PCU operator panel with 19" display, full keyboard, membrane keypad - 1 x additional Siemens HT 8 portable handheld operating unit with 7.5" touchscreen, version with manual pulse generator Safety equipment: - 1 soundproof enclosure - 2 automatic loading doors with viewing windows - Loading and unloading areas safeguarded by light barriers and bumpers on the tables Measuring probes: - 2 x 3D radio measuring probes, HSK F63 interface, for automatic changing from the tool magazine Minimum quantity lubrication: - 2 minimum quantity lubrication units - 2 spray nozzles per milling unit, individually controllable via M-function Table air blow-off system: - 2 x air knife table blow-off systems for cleaning the tables during traverse out of the machining area (limited in coupled operation) The machine is installed and can be inspected in 89568 Hermaringen.

Stanje: dober (rabljeno), Leto izdelave: 2005, Used machine MAKA PE 70 5-axis CNC machining centre for working wood and plastics. Machine in gantry design, with rack and pinion drive. Year of manufacture: 2005 Technical Data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cups) Working areas in 3-axis operation, with tool diameter 60 mm / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm setup height (top edge of vacuum cups) A-axis 540° (rotary axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse X/Y-axes 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° angle head, power 7.5 kW (S1) 10 kW (S6), infinitely variable speed up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip extraction system with lamella curtain. Tool magazine: - Tool interface HSK-F63 for automatic tool changer system. - 1 horizontal drum magazine with 20 tool spaces for tools up to D = 90 mm, with sorted placement up to max. 160 mm (three spaces required for this). Machine table: - 10 support tubes on linear guides with pneumatic release for quick positioning. - 2 x control circuits for stops "raise / lower" - 2 x control circuits for sliding rail "raise / lower" - 2 x control circuits for pneumatics "clamp / release" - 2 x vacuum control circuits with buttons for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated in the base frame, for removal of chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine equipped with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per pump approx. 130 m³/h, with reservoir. - Vacuum supports with various suction pads. Gsdpovr A A Tofx Ahmobn Other features: - Automatic central lubrication. - Control cabinet with air conditioning unit. Workplace safety: - Moving protective cabin with safety bumpers on the operator side. Repairs / maintenance prior to delivery: - Service performed. - Lamella curtain at gantry new - Sliding window new - Energy chain Y-axis new - Energy chain Z-axis new - Various cables and air hoses replaced.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Used Machine MAKA PM 270 R 5-Axis CNC Machining Center for processing wood, plastic, and aluminum. Gantry design with rack and pinion drive. Year of manufacture: 2001 Technical Data: CNC control BWO 900C for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile operator console stand. Working areas in 5-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups) Working areas in 3-axis operation, with tool Ø 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cups) A-axis 540° (rotary axis), B-axis 200° (swivel axis +/- 100°) Rapid traverse X/Y-axis: 45 m/min. Z-axis: 24 m/min. A/B-axis: 10 m/min. Gedpsvmywqofx Ahmobn Milling Unit: - 1 universal unit for 5-axis milling with 50° angled head, max. output 12.5 kW, infinitely variable speed up to 17,000 rpm, spindle water-cooled. - 1 NC height-adjustable chip extraction system with lamellar curtain. Tool Magazine: - Tool interface ISO 40 for automatic tool changing system. - 1 chain-type tool magazine with 32 slots for tools up to D = 90 mm, sorted storage up to max. 160 mm (three slots required). Machine table: - 10 support tubes on linear guides with pneumatic release device for rapid positioning. - 2 control circuits for stops "raise / lower" - 2 control circuits for slide bar "raise / lower" - 2 control circuits for pneumatics "clamp / release" - 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. - 1 chip conveyor integrated into the base frame for transporting chips and small offcuts up to approx. 100 x 100 x 100 mm. Tools: Tools are not included! Delivery can include various tool holders upon agreement. We would be pleased to provide you with a separate offer. Vacuum System: - 1 vacuum pump, approx. 140 m³ suction capacity, including 250 L tank for rapid vacuum build-up. - 10 vacuum supports with various suction pads. - Various clamping devices for posts and curved elements. - Stops raise / lower for workpiece positioning. Miscellaneous: - Automatic central lubrication system. - Control cabinet with climate control unit. - Projection laser Occupational Safety: - Moving protective cabin with safety bumpers on the operator side.

Stanje: dober (rabljeno), Leto izdelave: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with integrated control cabinet in the machine base frame. CNC control unit BWO 900C, 1 MB memory, with integrated PC. Technical Data: Working areas / travel dimensions: With tool length 130 mm and diameter 60 mm X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 300 mm (with fixture height 120 mm) A-axis: 540° B-axis: 200° (+/- 100°) Rapid traverse speeds: X/Y-axis: 45 m/min Z-axis: 15 m/min A/B-axis: 10,000 °/min 1 high-speed milling spindle HSD 6.8 kW, continuously variable speed control from 2,000 – 24,000 rpm, nominal power from 12,000 rpm. With ceramic bearings, air-cooled. Tool holder SK 30 with automatic tool changer. Godsir Aq Tjpfx Ahmsbn 1 moving drum-type tool magazine for 10 tools up to Ø 60 mm and – depending on tool diameter – 130 mm length from reference face. Aluminum table plate 1,000 x 1,000 mm with grid bores 1 vacuum pump 54 m³/h, 1 x vacuum clamping circuit Automatic central lubrication, Control cabinet with air conditioner. Occupational safety: Sliding door for front loading, safety enclosure at the machine rear, with side access door, enclosure is open at the top. Connections: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz The use of an RCD (Residual Current Device) in the machine supply line is not possible. Operating temperature: 10 – 35° C Pneumatics: 6 bar, approx. 18 m³/h No tool holders or machining tools are included in the scope of delivery. Used machine, sold without any warranty or guarantee.

Stanje: dober (rabljeno), Leto izdelave: 2000, Maka MM 7 T / 5 axes, Year of manufacture: 2000, Control: Siemens 840 D, Travel X/Y/Z: 2x1500/2000/600 mm, Gantry milling machine for light machining, Milling spindle: 7.5 kW, NC milling head A-axis: 540°, B-axis: +/- 100°, Tool changer: 10-fold, HSK F 63 tool holder, Saw blade Ø max. 170 mm, Spindle speed up to 24,000 rpm, X/Y axis rack and pinion, Godpfxewuy Aho Ahmebn Z axis ball screw, Vacuum table, Aluminium flat table,

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), A CNC 4-axis milling and drilling machine Maka for plastics, wood, and aluminum is available. Travel range X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle interface: HSK63, spindle power: 12kW, spindle speed: 24,000 rpm. Tool stations: 12, angle head positions: 3. Machine dimensions X/Y/Z: 12,000mm/5,700mm/3,200mm, control system: BWO 920. Documentation available. An on-site inspection is possible. Gbjdpfxjvmq Tve Ahmsn

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Travel paths X/Y/Z: 12,100 mm / 2,350 mm / 800 mm, A-axis swivel: +/-98°, Rapid traverse X/Y/Z/A: 45 / 45 / 24 / 10 m/min, Machining length: 11,000 mm, Spindle speed: 24,000 rpm, Table: 10 support traverses, 2 hydraulically swiveling workpiece stops, Control: BWO 930, Operating hours: 23,792 h, Dimensions X/Y: 18,300 mm / 6,250 mm. Includes travelling gantry design with dual-sided gantry drive, coolant spray system with minimal-quantity fine atomization. Documentation available. Gbjdpfx Ahetqfqxsmsn

Stanje: rabljeno, Leto izdelave: 2000, Used Machine MAKA CNC Door Processing Center HC 55 TBZ Year of Manufacture: 2000 Gbjdpfxjv S Dn Ds Ahmsn Door processing center for machining interior doors (hardware recessing, light cut-outs, peephole milling, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: for door width: 250 – 1,280 mm for door height: max. 2,500 mm for door thickness: max. 80 mm Rapid traverse speed: X-/Y-axis 45 m/min. Z-axis 10 m/min. 1 universal milling unit SK40 with integrated A swivel axis 190° (+/- 95°), in X-axis direction for lock/hinge processing on both sides along the door edge directly with the unit. Milling spindle water-cooled, rated power 8 kW, available from 7,000 rpm, speed infinitely variable from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. 1 chain tool magazine with 24 stations, for tools up to Ø 90 mm, with sorted storage up to max. Ø 160 mm, arranged at the unit exit position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 magazine stations set up for use of angle/probing heads with torque support. Machine table with programmable width adjustment and width measurement for processing with edge bander for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically liftable and lowerable. 1 longitudinal stop with pneumatic setting stroke, mounted traveling with the unit for positioning to door length and door thickness. 4 pneumatic stops, swinging in from the side, for doors with veneer/overlapping face panels up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single-/double-rebate doors). 2 vacuum clamping lines, each with 5 vacuum cups, 130/200 x 70 mm, with feeler valve and blow-off equipment. Per line, 3 vacuum cups lowerable to match door height being processed. 1 vacuum pump approx. 128 m³/h suction capacity, with 250-liter buffer tank, for quick vacuum buildup. Automatic central lubrication, free-standing control cabinet with air conditioning unit. Occupational safety: bumpers on both sides of the gantry, side safety fence. Various tools and tool holders can be included by prior arrangement. The machine can be inspected in Hermaringen.

Stanje: rabljeno, Leto izdelave: 1999, Used Machine MAKA KPF 334 RT 5-Axis CNC Machining Center Year of Manufacture: 1999 High-performance CNC milling center for 5-axis machining, ideal for processing deep-drawn parts. Compact design with control cabinet integrated into the machine base. Equipped with automatic central lubrication and a control cabinet with air conditioning unit. Design / Version: Gantry-type machining center with 2 aluminum tables Axis Information: Axis: Size / Travel Distance / Speed Gbedpfx Ahjv S Ut Demon X-axis: 2,750 mm / 40 m/min Y-/V-axis: 2,400 mm / 40 m/min Z-axis: 700 mm / 15 m/min Rotary axis: 540° / 10,000°/min Swivel axis: 200° / 10,000°/min Machine Connection: Voltage: 400V Voltage deviation: max. +/- 5% Operating temperature: 10 - 35°C Compressed air pressure: 6 bar Working areas / Workpiece cube size: X-axis: 2 x 1,000 mm (coupled 2,150 mm) Y-axis: 1,000 mm Z-axis: 400 mm Specified values are based on a fixture height of 170 mm / tool length 60 mm. 1 Equipment 1.1 Table Design 2 aluminum surface tables with threaded bushings for clamping, each 1,000 x 1,000 mm in size. Tables can be coupled for processing large components. Both table plates additionally receive threaded bushings and locating bushings (or dowel pins) for accepting the customer’s milling fixture as specified. 1.2 Vacuum supply Machine is equipped with a vacuum system. 1 vacuum pump 1.3 Clamping system 1 vacuum clamping circuit with vacuum distribution unit, pressure gauge, and pressure switch. Quick-connect couplings mounted to the machine table. 1.4 Milling unit: 1 pc. DFM 83/90 milling spindle, ER16 / M22 x 1.5 2.5 kW / 27,000 rpm Universal unit for 5-axis milling with 90° head, tool holder ER16 / M22 x 1.5 1,000 to 27,000 rpm (infinitely variable speed), air-cooled. A-axis 540° (rotary axis +/- 270°) B-axis 200° (swivel axis +/- 100°) 1.5 Axis drives Ball screw in X-, Y-, and Z-axes; A/B-axes with hollow-shaft drives. 1.6 Operator safety One automatic sliding door per table. Including safety cabin. 1.7 Control system 1 pc. BWO 900 machine control, with 1 pc. BWO 900C operating panel mounted on a mobile operator's console. 1.8 Power supply Machine is designed for the following mains voltage: Voltage: 400 V (max. +/- 5%) Installed power: approx. 9 kW Frequency: 50 Hz The use of an RCD (Residual Current Device) in the machine power supply is not permitted. 1.9 Country specification Technical machine documentation in German. Consisting of: - Operating manual for the machine - Operating manual for the control system - Wiring diagrams for electrical and pneumatic systems - Control language in German.