Drugi stroji za odstranjevanje igel nakup rabljenega (47)

Leto izdelave: 1973, Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 70 kg, največja hitrost vrtenja: 6.400 obr/min, dolžina mize: 500 mm, širina mize: 70 mm, številka stroja/vozila: 1502, Brez najnižje cene – zagotovljena prodaja najvišjemu ponudniku! Stroj se draži zaradi likvidacije podjetja. Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Število vrtljajev: 6.400 obr./min Mere mize: 500 x 70 mm Podpfx Adsxqf A Noyegg PODROBNOSTI O STROJU Električni podatki Obratovalna napetost: 380 V Priključna moč: 1,5 KM Mere & teža Mere (D x Š x V): 500 x 300 x 950 mm Teža: 70 kg

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. Pjdped Hintefx Adyogg The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Stanje: rabljeno, - Power consumption: 26 kVA 3P400V /N/PE/50Hz; protection: 63A Pgodjwpkc Ijpfx Adysg - Compressed air connection: min. 5 bar, max. 7 bar - Extraction capacity: min. V = 1,700 m³/h at Δp = -850 Pa, min. 20 m/s, run-on time 15s The system has been cleaned, packed, preserved, and stored by the manufacturer. It is complete and ready for operation. The system can be inspected at any time by prior appointment.

Stanje: novo, Edge and Contour Milling Machine Manufacturer: Assfalg Model: KKE 1 Condition: New machine Speed: 8,000 - 24,000 rpm (stepless) Max. chamfer width: 3 mm Standard equipment includes: - Guide ruler - Socket wrench, open-end wrench - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with clamping nut - Operating manual Pgsdpjbhfzbjfx Adyog

Stanje: novo, Deburring machine Manufacturer: Assfalg Model: AF 165 Condition: New machine Speed: 2,800 rpm Podpfodurxnjx Adyegg Maximum chamfer width: 1 mm Standard equipment includes: - Special flap grinding wheel K80-ST - Extraction nozzle - Operating manual

Stanje: novo, Trowalizing and Vibratory Finishing Machine Manufacturer: ASSFALG Model: TV 95-SL Condition: New machine Rotational speed: 1,500 - 3,000 rpm (steplessly adjustable) Trough dimensions: 498 x 384 x 410 mm Filling volume: 70 l Standard equipment includes: Pedpfx Aodwq Hgodyjgg - Timer - Water tank - Water pump - Operating manual

Stanje: novo, Deburring machine Make: Assfalg Model: FS 5 Condition: New machine Pedpfx Ajb E Dc Hjdysgg Speed: 2,800 rpm Max. chamfer width: 3 mm Standard equipment includes: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts - Chip drawer - Operating manual

Leto izdelave: 2002, Stanje: rabljeno, Diameter 180 mm Pgsdpot Hw Shsfx Adyjg Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: dober (rabljeno), 1 x deburring machine Vollma Pgodpfxsiz Dc Re Adyog JK WS 25 Especially suitable for removing cut-off burrs from turned parts. The machine can be inspected under power at our warehouse in Reichenbach.

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Podpfx Adjd Ev Upeyegg Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: novo, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. The OD tube deburring machines remove burrs from tubes after cutting. This machine simultaneously removes internal and external burrs from tubes and profiles without rotating the tube material. Round, square, rectangular, and various other tube and profile shapes are deburred within just a few seconds. Thanks to the rotating brush, the operator does not need to rotate the tube. The tube clamping system enables precise insertion of the tubes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container. Pjdped Ixbzsfx Adysgg

Stanje: novo, DM1100 C Edge Rounding Machine for Laser, Plasma, and Punched Parts The DM1100 C performs edge rounding and deburring of sharp burrs on both inner and outer edges of steel, stainless steel or aluminum parts after laser cutting, shearing, or punching processes. Pgjdpfx Ajd Evcwedyog The DM1100 C is equipped with double, counter-rotating cross belts with abrasive blocks, providing uniform edge rounding for the entire product. A key advantage of this machine is its ability to deburr products with protective surface film without damaging the foil – only the edges are processed. Excellent processing of parts in a wide range of dimensions, from small parts (50 x 50 mm) up to 1100 mm. Technical Data – DM1100 C Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): 3 Feed motor (kW): 0.18 Total power (kW): 6.2 Power consumption (A): 13 Extraction port per head (Ø mm): 100 Dimensions (mm): 2270x1560x1940 Weight (kg): 1200

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Psdsd Ixadepfx Adyogg Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), A deburring system (deburring cell) for post-processing of metal workpieces using a fettling robot is available. Documentation is provided. On-site inspection is possible. Pgodpfewfg Hujx Adysg

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), A specially built Eiberle deburring machine for tube blanks is available. Stations: 4, cycle time: 3-5 min, machine dimensions (X/Y/Z): approx. 3900 mm / 1050 mm / 1900 mm, weight: approx. 1500 kg, control system: Siemens, piece counter: 40,317. Supplied with a comprehensive tooling package. Documentation available. An on-site inspection is possible. Podov Sufyspfx Adyegg

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), A deburring machine with extraction system is available. Passage width: 1000 mm, sheet thickness: 20 mm, minimum sheet size X/Y: 150 mm/100 mm, sound power level: 82 dB(A), feed rate: 4 m/min, dimensions X/Y/Z: approx. 2200 mm/1500 mm/1500 mm, weight: approx. 1600 kg, operating hours: 7152 h. Includes P. Ries 330 D Lissmac extraction unit, year of manufacture: 2007, filter area: 10 m², air volume: 3300 m³/h, negative pressure: 33 mbar. Documentation available. Psdetul N Dspfx Adyogg

Stanje: novo,

Stanje: novo, Capacity: 300 kg Max. workpiece size: 500 x 200 x 20 mm Total workpiece weight: 200 kg Max. workpiece weight: 15 kg per piece Rotational speed: 22 rpm Filling level: 40–50% Color: Blue RAL 5015 Opening: 625 x 270 mm Total power requirement: 1.5 kW Machine weight: approx. 650 kg Dimensions (L x W x H): 1 x 1.7 x 1.29 m Pgedpfou Uu T Rjx Adysg New deburring or scouring drum (deburring machine) designed for safe and efficient deburring of workpieces. 6-sided drum lined with 36 mm wear-resistant, vulcanized rubber. Roll-up cover for protection against the rotating drum, robust construction, easy operation. Control panel with timer, hour counter, main and emergency stop switches, and signal light. The maximum fill level is 40% of the drum volume, corresponding to 300 kg (200 kg workpieces + 100 kg deburring media such as manganese steel balls or cast iron pentagons). These are available from Sideros: manganese steel balls €400 per 100 kg & cast iron pentagons €950 per 100 kg. Dust extraction unit Sideros ECO A (see photo 8) optionally available for €1,900 + VAT. The manufacturer recommends sending 100 kg of sample material for test deburring to the Italian plant before ordering. Otherwise, the manufacturer accepts no responsibility for the deburring results. Warranty: 12 months for single-shift operation. When replacement parts are supplied, defective parts must be returned. Downtime of the machine is not covered. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Stanje: novo, Capacity 750 kg Max. workpiece size 900 x 300 mm Total workpiece weight 550 kg Max. workpiece weight 30 kg per piece Podpevv H Tdjfx Adyegg Rotational speed 22 rpm Filling volume 50–60% Color blue 5015 RAL Opening 1775 x 440 mm Total power requirement 3 kW Machine weight approx. 1995 kg Space requirement approx. 2.9 x 1.33 x 1.75 m New deburring drum or deburring machine for safe and efficient deburring of workpieces. Suitable for HEAVY-DUTY applications. The EVO model is available for light to medium workpieces. 6-sided drum lined with durable, vulcanized rubber, thickness 36 mm, closure lid equipped with gas struts, protective cover/shutter against the rotating drum, robust design, easy operation. Control via timer on the control panel, main and emergency stop switches. Maximum filling amount is 40% of the drum volume, corresponding to 750 kg (consisting of 550 kg workpieces + 200 kg deburring media = hardened manganese balls (200 kg included), see photo 6, or cast iron pentagons, see photo 7). These are available from Sideros. Continuously variable speed adjustment via frequency inverter approx. 13–22 rpm (3,200 €). Soundproof enclosure (65/70 dB), see photo 9, and Sideros ECO B2 dust extraction system, see photo 8, are available at extra cost. The manufacturer recommends sending in 100 kg of sample parts of the material to be deburred for testing before ordering, especially for complex workpieces. Otherwise, no responsibility can be taken for the deburring result. VIDEO available on our website. Warranty = 12 months for single-shift operation; in case of spare parts shipment, the defective parts must be returned. Machine downtimes are not covered. STOCKING DEALER WITH 1600 m² SHOWROOM.

Leto izdelave: 1979, Stanje: nepreverjeno (rabljeno), Hurth ZEA1 Gear Deburring Machine -WKG 475- Offered here is a gear deburring machine from Hurth. Technical Data: Manufacturer: Hurth Model: ZEA1 Year of manufacture: 1979 Adjustability of processing unit: 150 mm Tool outside diameter: 190-205 mm Workpiece outside diameter: 20-120 mm Workpiece length: 150 mm Gear width: 50 mm Beveling module: 1-4 mm Bevel width: 0.7 mm Podpfxjhg Nuis Adysgg Weight: 2 t

Stanje: novo, Leto izdelave: 2025, Premer cevi (maks.): 48 mm, moč: 0,55 kW (0,75 KM), vhodna napetost: 400 V, Bei Duralbend fertigen wir hochwertige Entgratmaschinen, die auf die Anforderungen verschiedener Branchen zugeschnitten sind. Das Entgraten ist ein entscheidender Prozess zur Entfernung von scharfen Kanten und Oberflächenfehlern an Metallrohren, um eine saubere und glatte Oberfläche zu gewährleisten. Unsere Entgratmaschinen, die Rohrdurchmesser bis zu 48 mm und 60 mm bearbeiten können, sind ideal für Branchen wie die Automobilindustrie, Möbelherstellung und das Baugewerbe geeignet. Psdevx D Ecjpfx Adyjgg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Izboljšana rešitev za obdelavo površin kovinskih 3D-tiskanih komponent Tehnologija EXTRUDE HONE odpira vrata k zelo ekonomičnemu, hitremu, nadzorovanemu, prilagodljivemu in okolju prijaznemu postopku za izboljšano obdelavo površin kovinskih 3D-tiskanih delov. Na zalogi imamo rabljeno napravo, ki je na voljo za takojšnjo dobavo. Stroj je bil zelo malo uporabljen in je v odličnem stanju. LASTNOSTI IN PREDNOSTI + Učinkovitost pri izpopolnjeni obdelavi površin. Hitrost odvzema materiala (μm/min) je višja kot pri drugih metodah na trgu; npr. do 3-krat hitrejša od elektropoliranja. + Orodja neposredno iz tiskalnika. Orodja in vpenjalna priprava so izdelani po ugodnih stroških, saj so 3D-natisnjeni. + Največja prilagodljivost. V dveh delovnih dneh zagotovimo popolno in optimizirano zasnovo katode ter vpenjalnih priprav za vaše komponente. Pjdpfxev Awrwj Adyogg + Paketi za različne materiale. Specifične parametrične datoteke za posamezne skupine zlitin. + EXTRUDE HONE Connect Od CAD modela do končnega kosa, na daljavo: prenos parametrov, nadgradnja paketov materialov, programske opreme in vzdrževanja. + Enostavna uporaba. Novi in preprosti koncept upravljanja omejuje vnos podatkov na le štiri preproste parametre – parametre, ki jih razume vsak.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 500 mm, skupna širina: 440 mm, skupna višina: 230 mm, skupna masa: 26 kg, moč: 1,69 kW (2,30 KM), vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Stroj za posnemanje robov kovin Znamka: Marpol Rasant Primeren za odstranjevanje robov in posnemanje robov kovin (npr. jeklo, aluminij, medenina), plastike itd. Rabljen, popolnoma delujoč Podpfx Asx U D Afedyegg Kot posnetja 45° Brezstopenjska nastavitev posnetja Maksimalni posnetek 8 mm x 45° Rezkar opremljen s karbidnimi izmenljivimi rezili Dolžina vodil: 400 mm Motor z dvema stopnjama, Obrati: Stopnja 1: 1420 obr/min Stopnja 2: 2840 obr/min Moč motorja 1,7/2,3 KM Priključek: 400 V, 3-fazni Teža: 26 kg Prostorska zahteva (D x Š x V) 500 x 440 x 230 mm Stroj je možno videti in preizkusiti pod napetostjo. Stroj se prodaja zaradi prihajajočega zaprtja obrata (zaradi upokojitve). Imamo še druge ponudbe na spletu.

Leto izdelave: 2023, Stanje: novo, IMMEDIATE AVAILABILITY! Vibratory Finishing Machines with Separator The VKUE series machines are suitable for surface processing of metallic and non-metallic workpieces. These machines feature a large screening area, enabling easy separation of workpieces from the abrasive media. Optional Accessories - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinsing tube (various types available) Pgjdpfx Asn Smbredysg The images are for reference only. Optional accessories are available at an additional cost.

Leto izdelave: 2023, Stanje: novo, IMMEDIATE AVAILABILITY! Vibratory Finishing Machines with Separator The VKUE series machines can be used for surface treatment of metallic and non-metallic workpieces. These machines feature a large screening area and allow for easy separation of workpieces from the media. Optional Accessories - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Stand for control panel - Rinsing pipe (various types) Images are for reference only. Optional accessories are available at an extra charge. Psdpfx Aden Smcleyegg